Beispiel #1
0
// Run allows the beater to be run as a beat.
func (fb *Filebeat) Run(b *beat.Beat) error {
	var err error
	config := fb.config

	// Setup registrar to persist state
	registrar, err := registrar.New(config.RegistryFile)
	if err != nil {
		logp.Err("Could not init registrar: %v", err)
		return err
	}

	// Channel from harvesters to spooler
	publisherChan := make(chan []*input.FileEvent, 1)

	// Publishes event to output
	publisher := publish.New(config.PublishAsync,
		publisherChan, registrar.Channel, b.Publisher)

	// Init and Start spooler: Harvesters dump events into the spooler.
	spooler, err := spooler.New(config, publisherChan)
	if err != nil {
		logp.Err("Could not init spooler: %v", err)
		return err
	}

	crawler, err := crawler.New(spooler, config.Prospectors)
	if err != nil {
		logp.Err("Could not init crawler: %v", err)
		return err
	}

	// The order of starting and stopping is important. Stopping is inverted to the starting order.
	// The current order is: registrar, publisher, spooler, crawler
	// That means, crawler is stopped first.

	// Start the registrar
	err = registrar.Start()
	if err != nil {
		logp.Err("Could not start registrar: %v", err)
	}
	// Stopping registrar will write last state
	defer registrar.Stop()

	// Start publisher
	publisher.Start()
	// Stopping publisher (might potentially drop items)
	defer publisher.Stop()

	// Starting spooler
	spooler.Start()
	// Stopping spooler will flush items
	defer spooler.Stop()

	err = crawler.Start(registrar.GetStates())
	if err != nil {
		return err
	}
	// Stop crawler -> stop prospectors -> stop harvesters
	defer crawler.Stop()

	// Blocks progressing. As soon as channel is closed, all defer statements come into play
	<-fb.done

	return nil
}
Beispiel #2
0
// Run allows the beater to be run as a beat.
func (fb *Filebeat) Run(b *beat.Beat) error {
	var err error
	config := fb.config

	waitFinished := newSignalWait()
	waitEvents := newSignalWait()

	// count active events for waiting on shutdown
	wgEvents := &sync.WaitGroup{}
	finishedLogger := newFinishedLogger(wgEvents)

	// Setup registrar to persist state
	registrar, err := registrar.New(config.RegistryFile, finishedLogger)
	if err != nil {
		logp.Err("Could not init registrar: %v", err)
		return err
	}

	// Make sure all events that were published in
	registrarChannel := newRegistrarLogger(registrar)

	// Channel from spooler to harvester
	publisherChan := newPublisherChannel()

	// Publishes event to output
	publisher := publisher.New(config.PublishAsync, publisherChan.ch, registrarChannel, b.Publisher)

	// Init and Start spooler: Harvesters dump events into the spooler.
	spooler, err := spooler.New(config, publisherChan)
	if err != nil {
		logp.Err("Could not init spooler: %v", err)
		return err
	}

	crawler, err := crawler.New(newSpoolerOutlet(fb.done, spooler, wgEvents), config.Prospectors)
	if err != nil {
		logp.Err("Could not init crawler: %v", err)
		return err
	}

	// The order of starting and stopping is important. Stopping is inverted to the starting order.
	// The current order is: registrar, publisher, spooler, crawler
	// That means, crawler is stopped first.

	// Start the registrar
	err = registrar.Start()
	if err != nil {
		return fmt.Errorf("Could not start registrar: %v", err)
	}
	// Stopping registrar will write last state
	defer registrar.Stop()

	// Start publisher
	publisher.Start()
	// Stopping publisher (might potentially drop items)
	defer func() {
		// Closes first the registrar logger to make sure not more events arrive at the registrar
		// registrarChannel must be closed first to potentially unblock (pretty unlikely) the publisher
		registrarChannel.Close()
		publisher.Stop()
	}()

	// Starting spooler
	spooler.Start()

	// Stopping spooler will flush items
	defer func() {
		// Wait for all events to be processed or timeout
		waitEvents.Wait()

		// Closes publisher so no further events can be sent
		publisherChan.Close()
		// Stopping spooler
		spooler.Stop()
	}()

	err = crawler.Start(registrar.GetStates(), *once)
	if err != nil {
		return err
	}

	// If run once, add crawler completion check as alternative to done signal
	if *once {
		runOnce := func() {
			logp.Info("Running filebeat once. Waiting for completion ...")
			crawler.WaitForCompletion()
			logp.Info("All data collection completed. Shutting down.")
		}
		waitFinished.Add(runOnce)
	}

	// Add done channel to wait for shutdown signal
	waitFinished.AddChan(fb.done)
	waitFinished.Wait()

	// Stop crawler -> stop prospectors -> stop harvesters
	// Note: waiting for crawlers to stop here in order to install wgEvents.Wait
	//       after all events have been enqueued for publishing. Otherwise wgEvents.Wait
	//       or publisher might panic due to concurrent updates.
	crawler.Stop()

	timeout := fb.config.ShutdownTimeout
	// Checks if on shutdown it should wait for all events to be published
	waitPublished := fb.config.ShutdownTimeout > 0 || *once
	if waitPublished {
		// Wait for registrar to finish writing registry
		waitEvents.Add(withLog(wgEvents.Wait,
			"Continue shutdown: All enqueued events being published."))
		// Wait for either timeout or all events having been ACKed by outputs.
		if fb.config.ShutdownTimeout > 0 {
			logp.Info("Shutdown output timer started. Waiting for max %v.", timeout)
			waitEvents.Add(withLog(waitDuration(timeout),
				"Continue shutdown: Time out waiting for events being published."))
		} else {
			waitEvents.AddChan(fb.done)
		}
	}

	return nil
}
Beispiel #3
0
// Run allows the beater to be run as a beat.
func (fb *Filebeat) Run(b *beat.Beat) error {
	var err error
	config := fb.config

	var wgEvents *sync.WaitGroup // count active events for waiting on shutdown
	var finishedLogger publisher.SuccessLogger

	if fb.config.ShutdownTimeout > 0 {
		wgEvents = &sync.WaitGroup{}
		finishedLogger = newFinishedLogger(wgEvents)
	}

	// Setup registrar to persist state
	registrar, err := registrar.New(config.RegistryFile, finishedLogger)
	if err != nil {
		logp.Err("Could not init registrar: %v", err)
		return err
	}

	// Channel from harvesters to spooler
	successLogger := newRegistrarLogger(registrar)
	publisherChan := newPublisherChannel()

	// Publishes event to output
	publisher := publisher.New(config.PublishAsync,
		publisherChan.ch, successLogger, b.Publisher)

	// Init and Start spooler: Harvesters dump events into the spooler.
	spooler, err := spooler.New(config, publisherChan)
	if err != nil {
		logp.Err("Could not init spooler: %v", err)
		return err
	}

	crawler, err := crawler.New(
		newSpoolerOutlet(fb.done, spooler, wgEvents),
		config.Prospectors)
	if err != nil {
		logp.Err("Could not init crawler: %v", err)
		return err
	}

	// The order of starting and stopping is important. Stopping is inverted to the starting order.
	// The current order is: registrar, publisher, spooler, crawler
	// That means, crawler is stopped first.

	// Start the registrar
	err = registrar.Start()
	if err != nil {
		logp.Err("Could not start registrar: %v", err)
	}
	// Stopping registrar will write last state
	defer registrar.Stop()

	// Start publisher
	publisher.Start()
	// Stopping publisher (might potentially drop items)
	defer publisher.Stop()
	defer successLogger.Close()

	// Starting spooler
	spooler.Start()

	// Stopping spooler will flush items
	defer func() {
		// With harvesters being stopped, optionally wait for all enqueued events being
		// published and written by registrar before continuing shutdown.
		fb.sigWait.Wait()

		// continue shutdown
		publisherChan.Close()
		spooler.Stop()
	}()

	err = crawler.Start(registrar.GetStates())
	if err != nil {
		return err
	}
	// Blocks progressing. As soon as channel is closed, all defer statements come into play

	<-fb.done

	// Stop crawler -> stop prospectors -> stop harvesters
	// Note: waiting for crawlers to stop here in order to install wgEvents.Wait
	//       after all events have been enqueued for publishing. Otherwise wgEvents.Wait
	//       or publisher might panic due to concurrent updates.
	crawler.Stop()

	timeout := fb.config.ShutdownTimeout
	if timeout > 0 {
		logp.Info("Shutdown output timer started. Waiting for max %v.", timeout)

		// Wait for either timeout or all events having been ACKed by outputs.
		fb.sigWait.Add(withLog(wgEvents.Wait,
			"Continue shutdown: All enqueued events being published."))
		fb.sigWait.Add(withLog(waitDuration(timeout),
			"Continue shutdown: Time out waiting for events being published."))
	}

	return nil
}