Skip to content

jblindsay/go-spatial

Repository files navigation

GoSpatial

Warning

This project was developed during a period when I was experimenting with different alternatives to Java for developing Whitebox GAT. I have now settled on the Rust programming language for future development efforts. The tools that are contained within the GoSpatial codebase have since been ported to WhiteboxTools. This project is being maintained for archival purposes only.

Description

GoSpatial is a command-line interface program for analyzing and manipulating geospatial data. It has been developed by John Lindsay using the Go programming language and is compiled to native code. The project is experimental and is intended to provide additional analytical support for the Whitebox Geospatial Analysis Tools open-source GIS software. GoSpatial can however run completely independently of any other software. Visit the GoSpatial homepage here.

Install

To install the GoSpatial source code using the go get tool within the terminal, simply type:

go get github.com/jblindsay/go-spatial

You may then build an executable file using the go build tool. Alternatively, you may call the build.py script, although Go must be installed on the host computer.

Pre-compiled versions of the GoSpatial executable are available for various supported platforms and are distributed from the Centre for Hydrogeomatics homepage.

Usage

Getting help

To print a list of commands for GoSpatial, simply use the help command:

*************************
* Welcome to GoSpatial! *
*************************
Please enter a command: help
The following commands are recognized:
bench           Prints the current benchmarking mode
benchoff        Turns benchmarking mode off
benchon         Turns benchmarking mode on. Note: not all tools support this
clear           Clears the screen (also 'c', 'cls', or 'clr')
cwd             Changes the working directory (also 'cd' or 'dir'),
                 e.g. cwd /Users/john/
exit            Exits GoSpatial (also 'logout' or 'esc')
help            Prints a list of available commands (also 'h')
licence         Prints the licence
listtools       Lists all available tools
memprof         Outputs a memory usage profile
pwd             Prints the working directory (also 'dir')
rasterformats   Prints the supported raster formats
run             Runs a specified tool (also 'r'),
                 e.g. run toolname  or  run toolname "arg1;arg2;arg3;..."
toolargs        Prints the argument descriptions for a tool
toolhelp        Prints help documentation for a tool,
                 e.g. toolhelp BreachDepressions
version         Prints version information (also 'v')
Please enter a command:

The most common command that you will use is the run command.

Working directories

To print the current working directory, use the pwd command:

Please enter a command: pwd
Working directory: /Users/johnlindsay/Documents/Data/

To change the working directory, use the cwd command:

Please enter a command: cwd /Users/johnlinsay/Documents/data

Tools

To print a list of available tools, use the listtools command:

Please enter a command: listtools
The following 15 tools are available:
Aspect               Calculates aspect from a DEM
BreachDepressions    Removes depressions in DEMs using selective breaching
D8FlowAccumulation   Performs D8 flow accumulation on a DEM
DeviationFromMean    Calculates the deviation from mean
ElevationPercentile  Calculates the local elevation percentile for a DEM
FD8FlowAccum         Performs FD8 flow accumulation on a DEM
FillDepressions      Removes depressions in DEMs using filling
FillSmallNodataHoles Fills small nodata holes in a raster
Hillshade            Calculates a hillshade raster from a DEM
MaxElevationDeviatio Calculates the maximum elevation deviation across a ran
PrintGeoTiffTags     Prints a GeoTiff's tags
PrintLASInfo         Prints details of a LAS file
Quantiles            Tranforms raster values into quantiles
Slope                Calculates slope from a DEM
Whitebox2GeoTiff     Converts Whitebox GAT raster to GeoTiff

To run a tool from the command-line interface, use the run command:

Please enter a command: run BreachDepressions
*********************
* breachdepressions *
*********************
Enter the DEM file name (incl. file extension):

When you run a tool from the command-line interface, you will be guided in terms of the input of the arguments required to run the tool. When you are prompted for an input file name (as in the above example), if the file resides in the current working directory, you can omit the directory from the file name. If you would like to print a list of arguments needed to run a particular plugin tool, with descriptions, use the toolargs command:

Please enter a command: toolargs breachdepressions
The following arguments are listed for 'breachdepressions':
InputDEM               string    The input DEM name with file extension
OutputFile             string    The output filename with file extension
MaxDepth               float64   The maximum breach channel depth (-1 to ignore)
MaxLength              int       The maximum length of a breach channel (-1 to ignore)
ConstrainedBreaching   bool      Use constrained breaching?
SubsequentFilling      bool      Perform post-breach filling?
Please enter a command:

This can be helpful when you want to execute a GoSpatial and run a tool by specifying flags and arguments. In the example below, after cding to the directory containing the go-spatial executable file, it is possible to run a specific tool (filldepressions), providing the arguments for the -cwd, -run, and -args flags:

$ ./go-spatial -cwd="/Users/jlindsay/data/" -run="filldepressions" -args="my DEM.dep;outputDEM.tif;true"
*******************
* filldepressions *
*******************
Reading DEM data...
Filling DEM (2 of 2): 100%
Operation complete!
Elapsed time (excluding file I/O): 5.449522954s
Elapsed time (total): 6.087567077s
$

Calling GoSpatial tools from a script

Sometimes you need to call a GoSpatial tool in an automated fashion, rather than using the GoSpatial command-line interface. Here is an example (gospatial_example.py in source folder) of interacting with the GoSpatial library from a Python script:

#!/usr/bin/env python
import sys
import gospatial as gs

def main():
    try:
        # List all available tools in gospatial
        print(gs.list_tools())

        # Prints the gospatial help...a listing of available commands
        print(gs.help())

        # Print the help documentation for the Aspect tool
        print(gs.tool_help("Aspect"))

        # Prints the arguments used for running the FillDepressions tool
        print(gs.tool_args("FillDepressions"))

        # Run the Aspect tool, specifying the arguments.
        name = "Aspect"
        args = [
            "DEM no OTOs.dep",
            "aspect.dep"
        ]

        # Run the tool and check the return value
        ret = gs.run_tool(name, args, cb)
        if ret != 0:
            print("ERROR: return value={}".format(ret))

    except:
        print("Unexpected error:", sys.exc_info()[0])
        raise

# Create a custom callback to process the text coming out of the tool.
# If a callback is not provided, it will simply print the output stream.
def cb(s):
    if "%" in s:
        str_array = s.split(" ")
        label = s.replace(str_array[len(str_array)-1], "")
        progress = int(str_array[len(str_array)-1].replace("%", "").strip())
        print("\rProgress: {}%".format(progress)),
    else:
        if "error" in s.lower():
            print("\rERROR: {}".format(s)),
        else:
            if not s.startswith("*"):
                print("\r{}          ".format(s)),

main()

The code above uses the gospatial.py helper script, also found in the source folder.

License

GoSpatial is distributed under the MIT open-source license.

Releases

No releases published

Packages

No packages published