Example #1
0
File: cgen.go Project: tidatida/go
/*
 * generate an addressable node in res, containing the value of n.
 * n is an array index, and might be any size; res width is <= 32-bit.
 * returns Prog* to patch to panic call.
 */
func igenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		if n.Addable != 0 {
			// nothing to do.
			*res = *n
		} else {
			gc.Tempname(res, gc.Types[gc.TUINT32])
			gc.Cgen(n, res)
		}

		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gc.Tempname(res, gc.Types[gc.TUINT32])
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gins(x86.ACMPL, &hi, &zero)
	splitclean()
	return gc.Gbranch(x86.AJNE, nil, +1)
}
Example #2
0
/*
 * generate array index into res.
 * n might be any size; res is 32-bit.
 * returns Prog* to patch to panic call.
 */
func cgenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		gc.Cgen(n, res)
		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var n1 gc.Node
	gc.Regalloc(&n1, gc.Types[gc.TINT32], nil)
	var n2 gc.Node
	gc.Regalloc(&n2, gc.Types[gc.TINT32], nil)
	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gmove(&hi, &n1)
	gmove(&zero, &n2)
	gins(arm.ACMP, &n1, &n2)
	gc.Regfree(&n2)
	gc.Regfree(&n1)
	splitclean()
	return gc.Gbranch(arm.ABNE, nil, -1)
}
Example #3
0
/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// copy from byte to full registers
	t := gc.Types[gc.TUINT32]

	if gc.Issigned[nl.Type.Etype] {
		t = gc.Types[gc.TINT32]
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		tmp := nl
		nl = nr
		nr = tmp
	}

	var nt gc.Node
	gc.Tempname(&nt, nl.Type)
	cgen(nl, &nt)
	var n1 gc.Node
	regalloc(&n1, t, res)
	cgen(nr, &n1)
	var n2 gc.Node
	regalloc(&n2, t, nil)
	gmove(&nt, &n2)
	a := optoas(op, t)
	gins(a, &n2, &n1)
	regfree(&n2)
	gmove(&n1, res)
	regfree(&n1)
}
Example #4
0
File: ggen.go Project: tidatida/go
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
	r := int(reg[dr])
	gc.Nodreg(x, gc.Types[gc.TINT32], dr)

	// save current ax and dx if they are live
	// and not the destination
	*oldx = gc.Node{}

	if r > 0 && !gc.Samereg(x, res) {
		gc.Tempname(oldx, gc.Types[gc.TINT32])
		gmove(x, oldx)
	}

	gc.Regalloc(x, t, x)
}
Example #5
0
/*
 * generate function call;
 *	proc=0	normal call
 *	proc=1	goroutine run in new proc
 *	proc=2	defer call save away stack
 */
func cgen_call(n *gc.Node, proc int) {
	if n == nil {
		return
	}

	var afun gc.Node
	if n.Left.Ullman >= gc.UINF {
		// if name involves a fn call
		// precompute the address of the fn
		gc.Tempname(&afun, gc.Types[gc.Tptr])

		cgen(n.Left, &afun)
	}

	gc.Genlist(n.List) // assign the args
	t := n.Left.Type

	// call tempname pointer
	if n.Left.Ullman >= gc.UINF {
		var nod gc.Node
		regalloc(&nod, gc.Types[gc.Tptr], nil)
		gc.Cgen_as(&nod, &afun)
		nod.Type = t
		ginscall(&nod, proc)
		regfree(&nod)
		return
	}

	// call pointer
	if n.Left.Op != gc.ONAME || n.Left.Class != gc.PFUNC {
		var nod gc.Node
		regalloc(&nod, gc.Types[gc.Tptr], nil)
		gc.Cgen_as(&nod, n.Left)
		nod.Type = t
		ginscall(&nod, proc)
		regfree(&nod)
		return
	}

	// call direct
	n.Left.Method = 1

	ginscall(n.Left, proc)
}
Example #6
0
File: ggen.go Project: tidatida/go
/*
 * generate floating-point operation.
 */
func cgen_float(n *gc.Node, res *gc.Node) {
	nl := n.Left
	switch n.Op {
	case gc.OEQ,
		gc.ONE,
		gc.OLT,
		gc.OLE,
		gc.OGE:
		p1 := gc.Gbranch(obj.AJMP, nil, 0)
		p2 := gc.Pc
		gmove(gc.Nodbool(true), res)
		p3 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
		gc.Bgen(n, true, 0, p2)
		gmove(gc.Nodbool(false), res)
		gc.Patch(p3, gc.Pc)
		return

	case gc.OPLUS:
		gc.Cgen(nl, res)
		return

	case gc.OCONV:
		if gc.Eqtype(n.Type, nl.Type) || gc.Noconv(n.Type, nl.Type) {
			gc.Cgen(nl, res)
			return
		}

		var n2 gc.Node
		gc.Tempname(&n2, n.Type)
		var n1 gc.Node
		gc.Mgen(nl, &n1, res)
		gmove(&n1, &n2)
		gmove(&n2, res)
		gc.Mfree(&n1)
		return
	}

	if gc.Thearch.Use387 {
		cgen_float387(n, res)
	} else {
		cgen_floatsse(n, res)
	}
}
Example #7
0
/*
 * peep.c
 */
func mgen(n *gc.Node, n1 *gc.Node, rg *gc.Node) {
	n1.Op = gc.OEMPTY

	if n.Addable != 0 {
		*n1 = *n
		if n1.Op == gc.OREGISTER || n1.Op == gc.OINDREG {
			reg[n.Val.U.Reg]++
		}
		return
	}

	gc.Tempname(n1, n.Type)
	cgen(n, n1)
	if n.Type.Width <= int64(gc.Widthptr) || gc.Isfloat[n.Type.Etype] {
		n2 := *n1
		regalloc(n1, n.Type, rg)
		gmove(&n2, n1)
	}
}
Example #8
0
File: ggen.go Project: tidatida/go
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	var n1 gc.Node
	var n2 gc.Node
	var ax gc.Node
	var dx gc.Node

	t := nl.Type
	a := optoas(gc.OHMUL, t)

	// gen nl in n1.
	gc.Tempname(&n1, t)

	gc.Cgen(nl, &n1)

	// gen nr in n2.
	gc.Regalloc(&n2, t, res)

	gc.Cgen(nr, &n2)

	// multiply.
	gc.Nodreg(&ax, t, x86.REG_AX)

	gmove(&n2, &ax)
	gins(a, &n1, nil)
	gc.Regfree(&n2)

	if t.Width == 1 {
		// byte multiply behaves differently.
		gc.Nodreg(&ax, t, x86.REG_AH)

		gc.Nodreg(&dx, t, x86.REG_DX)
		gmove(&ax, &dx)
	}

	gc.Nodreg(&dx, t, x86.REG_DX)
	gmove(&dx, res)
}
Example #9
0
func memname(n *gc.Node, t *gc.Type) {
	gc.Tempname(n, t)
	n.Sym = gc.Lookup("." + n.Sym.Name[1:]) // keep optimizer from registerizing
	n.Orig.Sym = n.Sym
}
Example #10
0
func floatmove_sse(f *gc.Node, t *gc.Node) {
	var r1 gc.Node
	var cvt *gc.Type
	var a int

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)

	switch uint32(ft)<<16 | uint32(tt) {
	// should not happen
	default:
		gc.Fatal("gmove %v -> %v", gc.Nconv(f, 0), gc.Nconv(t, 0))

		return

		// convert via int32.
	/*
	* float to integer
	 */
	case gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TUINT8:
		cvt = gc.Types[gc.TINT32]

		goto hard

		// convert via int64.
	case gc.TFLOAT32<<16 | gc.TUINT32,
		gc.TFLOAT64<<16 | gc.TUINT32:
		cvt = gc.Types[gc.TINT64]

		goto hardmem

	case gc.TFLOAT32<<16 | gc.TINT32:
		a = x86.ACVTTSS2SL
		goto rdst

	case gc.TFLOAT64<<16 | gc.TINT32:
		a = x86.ACVTTSD2SL
		goto rdst

		// convert via int32 memory
	/*
	 * integer to float
	 */
	case gc.TINT8<<16 | gc.TFLOAT32,
		gc.TINT8<<16 | gc.TFLOAT64,
		gc.TINT16<<16 | gc.TFLOAT32,
		gc.TINT16<<16 | gc.TFLOAT64,
		gc.TUINT16<<16 | gc.TFLOAT32,
		gc.TUINT16<<16 | gc.TFLOAT64,
		gc.TUINT8<<16 | gc.TFLOAT32,
		gc.TUINT8<<16 | gc.TFLOAT64:
		cvt = gc.Types[gc.TINT32]

		goto hard

		// convert via int64 memory
	case gc.TUINT32<<16 | gc.TFLOAT32,
		gc.TUINT32<<16 | gc.TFLOAT64:
		cvt = gc.Types[gc.TINT64]

		goto hardmem

	case gc.TINT32<<16 | gc.TFLOAT32:
		a = x86.ACVTSL2SS
		goto rdst

	case gc.TINT32<<16 | gc.TFLOAT64:
		a = x86.ACVTSL2SD
		goto rdst

		/*
		 * float to float
		 */
	case gc.TFLOAT32<<16 | gc.TFLOAT32:
		a = x86.AMOVSS

	case gc.TFLOAT64<<16 | gc.TFLOAT64:
		a = x86.AMOVSD

	case gc.TFLOAT32<<16 | gc.TFLOAT64:
		a = x86.ACVTSS2SD
		goto rdst

	case gc.TFLOAT64<<16 | gc.TFLOAT32:
		a = x86.ACVTSD2SS
		goto rdst
	}

	gins(a, f, t)
	return

	// requires register intermediate
hard:
	gc.Regalloc(&r1, cvt, t)

	gmove(f, &r1)
	gmove(&r1, t)
	gc.Regfree(&r1)
	return

	// requires memory intermediate
hardmem:
	gc.Tempname(&r1, cvt)

	gmove(f, &r1)
	gmove(&r1, t)
	return

	// requires register destination
rdst:
	gc.Regalloc(&r1, t.Type, t)

	gins(a, f, &r1)
	gmove(&r1, t)
	gc.Regfree(&r1)
	return
}
Example #11
0
func floatmove_387(f *gc.Node, t *gc.Node) {
	var r1 gc.Node
	var a int

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		goto fatal

		/*
		* float to integer
		 */
	case gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TINT32,
		gc.TFLOAT32<<16 | gc.TINT64,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TINT32,
		gc.TFLOAT64<<16 | gc.TINT64:
		if t.Op == gc.OREGISTER {
			goto hardmem
		}
		var r1 gc.Node
		gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
		if f.Op != gc.OREGISTER {
			if ft == gc.TFLOAT32 {
				gins(x86.AFMOVF, f, &r1)
			} else {
				gins(x86.AFMOVD, f, &r1)
			}
		}

		// set round to zero mode during conversion
		var t1 gc.Node
		memname(&t1, gc.Types[gc.TUINT16])

		var t2 gc.Node
		memname(&t2, gc.Types[gc.TUINT16])
		gins(x86.AFSTCW, nil, &t1)
		gins(x86.AMOVW, ncon(0xf7f), &t2)
		gins(x86.AFLDCW, &t2, nil)
		if tt == gc.TINT16 {
			gins(x86.AFMOVWP, &r1, t)
		} else if tt == gc.TINT32 {
			gins(x86.AFMOVLP, &r1, t)
		} else {
			gins(x86.AFMOVVP, &r1, t)
		}
		gins(x86.AFLDCW, &t1, nil)
		return

		// convert via int32.
	case gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TUINT8:
		var t1 gc.Node
		gc.Tempname(&t1, gc.Types[gc.TINT32])

		gmove(f, &t1)
		switch tt {
		default:
			gc.Fatal("gmove %v", gc.Nconv(t, 0))

		case gc.TINT8:
			gins(x86.ACMPL, &t1, ncon(-0x80&(1<<32-1)))
			p1 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TINT32]), nil, -1)
			gins(x86.ACMPL, &t1, ncon(0x7f))
			p2 := gc.Gbranch(optoas(gc.OGT, gc.Types[gc.TINT32]), nil, -1)
			p3 := gc.Gbranch(obj.AJMP, nil, 0)
			gc.Patch(p1, gc.Pc)
			gc.Patch(p2, gc.Pc)
			gmove(ncon(-0x80&(1<<32-1)), &t1)
			gc.Patch(p3, gc.Pc)
			gmove(&t1, t)

		case gc.TUINT8:
			gins(x86.ATESTL, ncon(0xffffff00), &t1)
			p1 := gc.Gbranch(x86.AJEQ, nil, +1)
			gins(x86.AMOVL, ncon(0), &t1)
			gc.Patch(p1, gc.Pc)
			gmove(&t1, t)

		case gc.TUINT16:
			gins(x86.ATESTL, ncon(0xffff0000), &t1)
			p1 := gc.Gbranch(x86.AJEQ, nil, +1)
			gins(x86.AMOVL, ncon(0), &t1)
			gc.Patch(p1, gc.Pc)
			gmove(&t1, t)
		}

		return

		// convert via int64.
	case gc.TFLOAT32<<16 | gc.TUINT32,
		gc.TFLOAT64<<16 | gc.TUINT32:
		cvt = gc.Types[gc.TINT64]

		goto hardmem

		/*
		 * integer to float
		 */
	case gc.TINT16<<16 | gc.TFLOAT32,
		gc.TINT16<<16 | gc.TFLOAT64,
		gc.TINT32<<16 | gc.TFLOAT32,
		gc.TINT32<<16 | gc.TFLOAT64,
		gc.TINT64<<16 | gc.TFLOAT32,
		gc.TINT64<<16 | gc.TFLOAT64:
		if t.Op != gc.OREGISTER {
			goto hard
		}
		if f.Op == gc.OREGISTER {
			cvt = f.Type
			goto hardmem
		}

		switch ft {
		case gc.TINT16:
			a = x86.AFMOVW

		case gc.TINT32:
			a = x86.AFMOVL

		default:
			a = x86.AFMOVV
		}

		// convert via int32 memory
	case gc.TINT8<<16 | gc.TFLOAT32,
		gc.TINT8<<16 | gc.TFLOAT64,
		gc.TUINT16<<16 | gc.TFLOAT32,
		gc.TUINT16<<16 | gc.TFLOAT64,
		gc.TUINT8<<16 | gc.TFLOAT32,
		gc.TUINT8<<16 | gc.TFLOAT64:
		cvt = gc.Types[gc.TINT32]

		goto hardmem

		// convert via int64 memory
	case gc.TUINT32<<16 | gc.TFLOAT32,
		gc.TUINT32<<16 | gc.TFLOAT64:
		cvt = gc.Types[gc.TINT64]

		goto hardmem

		// The way the code generator uses floating-point
	// registers, a move from F0 to F0 is intended as a no-op.
	// On the x86, it's not: it pushes a second copy of F0
	// on the floating point stack.  So toss it away here.
	// Also, F0 is the *only* register we ever evaluate
	// into, so we should only see register/register as F0/F0.
	/*
	 * float to float
	 */
	case gc.TFLOAT32<<16 | gc.TFLOAT32,
		gc.TFLOAT64<<16 | gc.TFLOAT64:
		if gc.Ismem(f) && gc.Ismem(t) {
			goto hard
		}
		if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
			if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
				goto fatal
			}
			return
		}

		a = x86.AFMOVF
		if ft == gc.TFLOAT64 {
			a = x86.AFMOVD
		}
		if gc.Ismem(t) {
			if f.Op != gc.OREGISTER || f.Reg != x86.REG_F0 {
				gc.Fatal("gmove %v", gc.Nconv(f, 0))
			}
			a = x86.AFMOVFP
			if ft == gc.TFLOAT64 {
				a = x86.AFMOVDP
			}
		}

	case gc.TFLOAT32<<16 | gc.TFLOAT64:
		if gc.Ismem(f) && gc.Ismem(t) {
			goto hard
		}
		if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
			if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
				goto fatal
			}
			return
		}

		if f.Op == gc.OREGISTER {
			gins(x86.AFMOVDP, f, t)
		} else {
			gins(x86.AFMOVF, f, t)
		}
		return

	case gc.TFLOAT64<<16 | gc.TFLOAT32:
		if gc.Ismem(f) && gc.Ismem(t) {
			goto hard
		}
		if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
			var r1 gc.Node
			gc.Tempname(&r1, gc.Types[gc.TFLOAT32])
			gins(x86.AFMOVFP, f, &r1)
			gins(x86.AFMOVF, &r1, t)
			return
		}

		if f.Op == gc.OREGISTER {
			gins(x86.AFMOVFP, f, t)
		} else {
			gins(x86.AFMOVD, f, t)
		}
		return
	}

	gins(a, f, t)
	return

	// requires register intermediate
hard:
	gc.Regalloc(&r1, cvt, t)

	gmove(f, &r1)
	gmove(&r1, t)
	gc.Regfree(&r1)
	return

	// requires memory intermediate
hardmem:
	gc.Tempname(&r1, cvt)

	gmove(f, &r1)
	gmove(&r1, t)
	return

	// should not happen
fatal:
	gc.Fatal("gmove %v -> %v", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))

	return
}
Example #12
0
func floatmove(f *gc.Node, t *gc.Node) {
	var r1 gc.Node

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	// cannot have two floating point memory operands.
	if gc.Isfloat[ft] && gc.Isfloat[tt] && gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		gc.Convconst(&con, t.Type, &f.Val)
		f = &con
		ft = gc.Simsimtype(con.Type)

		// some constants can't move directly to memory.
		if gc.Ismem(t) {
			// float constants come from memory.
			if gc.Isfloat[tt] {
				goto hard
			}
		}
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		if gc.Thearch.Use387 {
			floatmove_387(f, t)
		} else {
			floatmove_sse(f, t)
		}
		return

		// float to very long integer.
	case gc.TFLOAT32<<16 | gc.TINT64,
		gc.TFLOAT64<<16 | gc.TINT64:
		if f.Op == gc.OREGISTER {
			cvt = f.Type
			goto hardmem
		}

		var r1 gc.Node
		gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
		if ft == gc.TFLOAT32 {
			gins(x86.AFMOVF, f, &r1)
		} else {
			gins(x86.AFMOVD, f, &r1)
		}

		// set round to zero mode during conversion
		var t1 gc.Node
		memname(&t1, gc.Types[gc.TUINT16])

		var t2 gc.Node
		memname(&t2, gc.Types[gc.TUINT16])
		gins(x86.AFSTCW, nil, &t1)
		gins(x86.AMOVW, ncon(0xf7f), &t2)
		gins(x86.AFLDCW, &t2, nil)
		if tt == gc.TINT16 {
			gins(x86.AFMOVWP, &r1, t)
		} else if tt == gc.TINT32 {
			gins(x86.AFMOVLP, &r1, t)
		} else {
			gins(x86.AFMOVVP, &r1, t)
		}
		gins(x86.AFLDCW, &t1, nil)
		return

	case gc.TFLOAT32<<16 | gc.TUINT64,
		gc.TFLOAT64<<16 | gc.TUINT64:
		if !gc.Ismem(f) {
			cvt = f.Type
			goto hardmem
		}

		bignodes()
		var f0 gc.Node
		gc.Nodreg(&f0, gc.Types[ft], x86.REG_F0)
		var f1 gc.Node
		gc.Nodreg(&f1, gc.Types[ft], x86.REG_F0+1)
		var ax gc.Node
		gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)

		if ft == gc.TFLOAT32 {
			gins(x86.AFMOVF, f, &f0)
		} else {
			gins(x86.AFMOVD, f, &f0)
		}

		// if 0 > v { answer = 0 }
		gins(x86.AFMOVD, &zerof, &f0)

		gins(x86.AFUCOMIP, &f0, &f1)
		p1 := gc.Gbranch(optoas(gc.OGT, gc.Types[tt]), nil, 0)

		// if 1<<64 <= v { answer = 0 too }
		gins(x86.AFMOVD, &two64f, &f0)

		gins(x86.AFUCOMIP, &f0, &f1)
		p2 := gc.Gbranch(optoas(gc.OGT, gc.Types[tt]), nil, 0)
		gc.Patch(p1, gc.Pc)
		gins(x86.AFMOVVP, &f0, t) // don't care about t, but will pop the stack
		var thi gc.Node
		var tlo gc.Node
		split64(t, &tlo, &thi)
		gins(x86.AMOVL, ncon(0), &tlo)
		gins(x86.AMOVL, ncon(0), &thi)
		splitclean()
		p1 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p2, gc.Pc)

		// in range; algorithm is:
		//	if small enough, use native float64 -> int64 conversion.
		//	otherwise, subtract 2^63, convert, and add it back.

		// set round to zero mode during conversion
		var t1 gc.Node
		memname(&t1, gc.Types[gc.TUINT16])

		var t2 gc.Node
		memname(&t2, gc.Types[gc.TUINT16])
		gins(x86.AFSTCW, nil, &t1)
		gins(x86.AMOVW, ncon(0xf7f), &t2)
		gins(x86.AFLDCW, &t2, nil)

		// actual work
		gins(x86.AFMOVD, &two63f, &f0)

		gins(x86.AFUCOMIP, &f0, &f1)
		p2 = gc.Gbranch(optoas(gc.OLE, gc.Types[tt]), nil, 0)
		gins(x86.AFMOVVP, &f0, t)
		p3 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p2, gc.Pc)
		gins(x86.AFMOVD, &two63f, &f0)
		gins(x86.AFSUBDP, &f0, &f1)
		gins(x86.AFMOVVP, &f0, t)
		split64(t, &tlo, &thi)
		gins(x86.AXORL, ncon(0x80000000), &thi) // + 2^63
		gc.Patch(p3, gc.Pc)
		splitclean()

		// restore rounding mode
		gins(x86.AFLDCW, &t1, nil)

		gc.Patch(p1, gc.Pc)
		return

		/*
		 * integer to float
		 */
	case gc.TINT64<<16 | gc.TFLOAT32,
		gc.TINT64<<16 | gc.TFLOAT64:
		if t.Op == gc.OREGISTER {
			goto hardmem
		}
		var f0 gc.Node
		gc.Nodreg(&f0, t.Type, x86.REG_F0)
		gins(x86.AFMOVV, f, &f0)
		if tt == gc.TFLOAT32 {
			gins(x86.AFMOVFP, &f0, t)
		} else {
			gins(x86.AFMOVDP, &f0, t)
		}
		return

		// algorithm is:
	//	if small enough, use native int64 -> float64 conversion.
	//	otherwise, halve (rounding to odd?), convert, and double.
	case gc.TUINT64<<16 | gc.TFLOAT32,
		gc.TUINT64<<16 | gc.TFLOAT64:
		var ax gc.Node
		gc.Nodreg(&ax, gc.Types[gc.TUINT32], x86.REG_AX)

		var dx gc.Node
		gc.Nodreg(&dx, gc.Types[gc.TUINT32], x86.REG_DX)
		var cx gc.Node
		gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
		var t1 gc.Node
		gc.Tempname(&t1, f.Type)
		var tlo gc.Node
		var thi gc.Node
		split64(&t1, &tlo, &thi)
		gmove(f, &t1)
		gins(x86.ACMPL, &thi, ncon(0))
		p1 := gc.Gbranch(x86.AJLT, nil, 0)

		// native
		var r1 gc.Node
		gc.Nodreg(&r1, gc.Types[tt], x86.REG_F0)

		gins(x86.AFMOVV, &t1, &r1)
		if tt == gc.TFLOAT32 {
			gins(x86.AFMOVFP, &r1, t)
		} else {
			gins(x86.AFMOVDP, &r1, t)
		}
		p2 := gc.Gbranch(obj.AJMP, nil, 0)

		// simulated
		gc.Patch(p1, gc.Pc)

		gmove(&tlo, &ax)
		gmove(&thi, &dx)
		p1 = gins(x86.ASHRL, ncon(1), &ax)
		p1.From.Index = x86.REG_DX // double-width shift DX -> AX
		p1.From.Scale = 0
		gins(x86.AMOVL, ncon(0), &cx)
		gins(x86.ASETCC, nil, &cx)
		gins(x86.AORL, &cx, &ax)
		gins(x86.ASHRL, ncon(1), &dx)
		gmove(&dx, &thi)
		gmove(&ax, &tlo)
		gc.Nodreg(&r1, gc.Types[tt], x86.REG_F0)
		var r2 gc.Node
		gc.Nodreg(&r2, gc.Types[tt], x86.REG_F0+1)
		gins(x86.AFMOVV, &t1, &r1)
		gins(x86.AFMOVD, &r1, &r1)
		gins(x86.AFADDDP, &r1, &r2)
		if tt == gc.TFLOAT32 {
			gins(x86.AFMOVFP, &r1, t)
		} else {
			gins(x86.AFMOVDP, &r1, t)
		}
		gc.Patch(p2, gc.Pc)
		splitclean()
		return
	}

	// requires register intermediate
hard:
	gc.Regalloc(&r1, cvt, t)

	gmove(f, &r1)
	gmove(&r1, t)
	gc.Regfree(&r1)
	return

	// requires memory intermediate
hardmem:
	gc.Tempname(&r1, cvt)

	gmove(f, &r1)
	gmove(&r1, t)
	return
}
Example #13
0
func igenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	gc.Tempname(res, n.Type)
	return cgenindex(n, res, bounded)
}
Example #14
0
File: ggen.go Project: tidatida/go
func cgen_floatsse(n *gc.Node, res *gc.Node) {
	var a int

	nl := n.Left
	nr := n.Right
	switch n.Op {
	default:
		gc.Dump("cgen_floatsse", n)
		gc.Fatal("cgen_floatsse %v", gc.Oconv(int(n.Op), 0))
		return

	case gc.OMINUS,
		gc.OCOM:
		nr = gc.Nodintconst(-1)
		gc.Convlit(&nr, n.Type)
		a = foptoas(gc.OMUL, nl.Type, 0)
		goto sbop

		// symmetric binary
	case gc.OADD,
		gc.OMUL:
		a = foptoas(int(n.Op), nl.Type, 0)

		goto sbop

		// asymmetric binary
	case gc.OSUB,
		gc.OMOD,
		gc.ODIV:
		a = foptoas(int(n.Op), nl.Type, 0)

		goto abop
	}

sbop: // symmetric binary
	if nl.Ullman < nr.Ullman || nl.Op == gc.OLITERAL {
		r := nl
		nl = nr
		nr = r
	}

abop: // asymmetric binary
	if nl.Ullman >= nr.Ullman {
		var nt gc.Node
		gc.Tempname(&nt, nl.Type)
		gc.Cgen(nl, &nt)
		var n2 gc.Node
		gc.Mgen(nr, &n2, nil)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gmove(&nt, &n1)
		gins(a, &n2, &n1)
		gmove(&n1, res)
		gc.Regfree(&n1)
		gc.Mfree(&n2)
	} else {
		var n2 gc.Node
		gc.Regalloc(&n2, nr.Type, res)
		gc.Cgen(nr, &n2)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, nil)
		gc.Cgen(nl, &n1)
		gins(a, &n2, &n1)
		gc.Regfree(&n2)
		gmove(&n1, res)
		gc.Regfree(&n1)
	}

	return
}
Example #15
0
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := int(optoas(op, nl.Type))

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		regalloc(&n1, nl.Type, res)
		cgen(nl, &n1)
		sc := uint64(uint64(gc.Mpgetfix(nr.Val.U.Xval)))
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		cgen(nr, &n5)
		nr = &n5
	}

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	var n1 gc.Node
	regalloc(&n1, nr.Type, nil) // to hold the shift type in CX
	var n3 gc.Node
	regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var n2 gc.Node
	regalloc(&n2, nl.Type, res)

	if nl.Ullman >= nr.Ullman {
		cgen(nl, &n2)
		cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		cgen(nr, &n1)
		gmove(&n1, &n3)
		cgen(nl, &n2)
	}

	regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := (*obj.Prog)(gc.Gbranch(optoas(gc.OLT, tcount), nil, +1))
		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	gmove(&n2, res)

	regfree(&n1)
	regfree(&n2)
}
Example #16
0
func anyregalloc() bool {
	var j int

	for i := int(0); i < len(reg); i++ {
		if reg[i] == 0 {
			goto ok
		}
		for j = 0; j < len(resvd); j++ {
			if resvd[j] == i {
				goto ok
			}
		}
		return true
	ok:
	}

	return false
}

/*
 * allocate register of type t, leave in n.
 * if o != N, o is desired fixed register.
 * caller must regfree(n).
 */
func regalloc(n *gc.Node, t *gc.Type, o *gc.Node) {
	if t == nil {
		gc.Fatal("regalloc: t nil")
	}
	et := int(int(gc.Simtype[t.Etype]))

	if gc.Debug['r'] != 0 {
		fixfree := int(0)
		fltfree := int(0)
		for i := int(arm64.REG_R0); i < arm64.REG_F31; i++ {
			if reg[i-arm64.REG_R0] == 0 {
				if i < arm64.REG_F0 {
					fixfree++
				} else {
					fltfree++
				}
			}
		}

		fmt.Printf("regalloc fix %d flt %d free\n", fixfree, fltfree)
	}

	var i int
	switch et {
	case gc.TINT8,
		gc.TUINT8,
		gc.TINT16,
		gc.TUINT16,
		gc.TINT32,
		gc.TUINT32,
		gc.TINT64,
		gc.TUINT64,
		gc.TPTR32,
		gc.TPTR64,
		gc.TBOOL:
		if o != nil && o.Op == gc.OREGISTER {
			i = int(o.Val.U.Reg)
			if i >= arm64.REGMIN && i <= arm64.REGMAX {
				goto out
			}
		}

		for i = arm64.REGMIN; i <= arm64.REGMAX; i++ {
			if reg[i-arm64.REG_R0] == 0 {
				regpc[i-arm64.REG_R0] = uint32(obj.Getcallerpc(&n))
				goto out
			}
		}

		gc.Flusherrors()
		for i := int(arm64.REG_R0); i < arm64.REG_R0+arm64.NREG; i++ {
			fmt.Printf("R%d %p\n", i, regpc[i-arm64.REG_R0])
		}
		gc.Fatal("out of fixed registers")

	case gc.TFLOAT32,
		gc.TFLOAT64:
		if o != nil && o.Op == gc.OREGISTER {
			i = int(o.Val.U.Reg)
			if i >= arm64.FREGMIN && i <= arm64.FREGMAX {
				goto out
			}
		}

		for i = arm64.FREGMIN; i <= arm64.FREGMAX; i++ {
			if reg[i-arm64.REG_R0] == 0 {
				regpc[i-arm64.REG_R0] = uint32(obj.Getcallerpc(&n))
				goto out
			}
		}

		gc.Flusherrors()
		for i := int(arm64.REG_F0); i < arm64.REG_F0+arm64.NREG; i++ {
			fmt.Printf("F%d %p\n", i, regpc[i-arm64.REG_R0])
		}
		gc.Fatal("out of floating registers")

	case gc.TCOMPLEX64,
		gc.TCOMPLEX128:
		gc.Tempname(n, t)
		return
	}

	gc.Fatal("regalloc: unknown type %v", gc.Tconv(t, 0))
	return

out:
	reg[i-arm64.REG_R0]++
	gc.Nodreg(n, t, i)
}

func regfree(n *gc.Node) {
	if n.Op == gc.ONAME {
		return
	}
	if n.Op != gc.OREGISTER && n.Op != gc.OINDREG {
		gc.Fatal("regfree: not a register")
	}
	i := int(int(n.Val.U.Reg) - arm64.REG_R0)
	if i == arm64.REGSP-arm64.REG_R0 {
		return
	}
	if i < 0 || i >= len(reg) {
		gc.Fatal("regfree: reg out of range")
	}
	if reg[i] <= 0 {
		gc.Fatal("regfree: reg not allocated")
	}
	reg[i]--
	if reg[i] == 0 {
		regpc[i] = 0
	}
}

/*
 * generate
 *	as $c, n
 */
func ginscon(as int, c int64, n2 *gc.Node) {
	var n1 gc.Node

	gc.Nodconst(&n1, gc.Types[gc.TINT64], c)

	if as != arm64.AMOVD && (c < -arm64.BIG || c > arm64.BIG) {
		// cannot have more than 16-bit of immediate in ADD, etc.
		// instead, MOV into register first.
		var ntmp gc.Node
		regalloc(&ntmp, gc.Types[gc.TINT64], nil)

		gins(arm64.AMOVD, &n1, &ntmp)
		gins(as, &ntmp, n2)
		regfree(&ntmp)
		return
	}

	gins(as, &n1, n2)
}

/*
 * generate
 *	as n, $c (CMP)
 */
func ginscon2(as int, n2 *gc.Node, c int64) {
	var n1 gc.Node

	gc.Nodconst(&n1, gc.Types[gc.TINT64], c)

	switch as {
	default:
		gc.Fatal("ginscon2")

	case arm64.ACMP:
		if -arm64.BIG <= c && c <= arm64.BIG {
			gcmp(as, n2, &n1)
			return
		}
	}

	// MOV n1 into register first
	var ntmp gc.Node
	regalloc(&ntmp, gc.Types[gc.TINT64], nil)

	gins(arm64.AMOVD, &n1, &ntmp)
	gcmp(as, n2, &ntmp)
	regfree(&ntmp)
}

/*
 * generate move:
 *	t = f
 * hard part is conversions.
 */
func gmove(f *gc.Node, t *gc.Node) {
	if gc.Debug['M'] != 0 {
		fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
	}

	ft := int(gc.Simsimtype(f.Type))
	tt := int(gc.Simsimtype(t.Type))
	cvt := (*gc.Type)(t.Type)

	if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
		gc.Complexmove(f, t)
		return
	}

	// cannot have two memory operands
	var r1 gc.Node
	var a int
	if gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		switch tt {
		default:
			gc.Convconst(&con, t.Type, &f.Val)

		case gc.TINT32,
			gc.TINT16,
			gc.TINT8:
			var con gc.Node
			gc.Convconst(&con, gc.Types[gc.TINT64], &f.Val)
			var r1 gc.Node
			regalloc(&r1, con.Type, t)
			gins(arm64.AMOVD, &con, &r1)
			gmove(&r1, t)
			regfree(&r1)
			return

		case gc.TUINT32,
			gc.TUINT16,
			gc.TUINT8:
			var con gc.Node
			gc.Convconst(&con, gc.Types[gc.TUINT64], &f.Val)
			var r1 gc.Node
			regalloc(&r1, con.Type, t)
			gins(arm64.AMOVD, &con, &r1)
			gmove(&r1, t)
			regfree(&r1)
			return
		}

		f = &con
		ft = tt // so big switch will choose a simple mov

		// constants can't move directly to memory.
		if gc.Ismem(t) {
			goto hard
		}
	}

	// value -> value copy, first operand in memory.
	// any floating point operand requires register
	// src, so goto hard to copy to register first.
	if gc.Ismem(f) && ft != tt && (gc.Isfloat[ft] || gc.Isfloat[tt]) {
		cvt = gc.Types[ft]
		goto hard
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		gc.Fatal("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))

		/*
		 * integer copy and truncate
		 */
	case gc.TINT8<<16 | gc.TINT8, // same size
		gc.TUINT8<<16 | gc.TINT8,
		gc.TINT16<<16 | gc.TINT8,
		// truncate
		gc.TUINT16<<16 | gc.TINT8,
		gc.TINT32<<16 | gc.TINT8,
		gc.TUINT32<<16 | gc.TINT8,
		gc.TINT64<<16 | gc.TINT8,
		gc.TUINT64<<16 | gc.TINT8:
		a = arm64.AMOVB

	case gc.TINT8<<16 | gc.TUINT8, // same size
		gc.TUINT8<<16 | gc.TUINT8,
		gc.TINT16<<16 | gc.TUINT8,
		// truncate
		gc.TUINT16<<16 | gc.TUINT8,
		gc.TINT32<<16 | gc.TUINT8,
		gc.TUINT32<<16 | gc.TUINT8,
		gc.TINT64<<16 | gc.TUINT8,
		gc.TUINT64<<16 | gc.TUINT8:
		a = arm64.AMOVBU

	case gc.TINT16<<16 | gc.TINT16, // same size
		gc.TUINT16<<16 | gc.TINT16,
		gc.TINT32<<16 | gc.TINT16,
		// truncate
		gc.TUINT32<<16 | gc.TINT16,
		gc.TINT64<<16 | gc.TINT16,
		gc.TUINT64<<16 | gc.TINT16:
		a = arm64.AMOVH

	case gc.TINT16<<16 | gc.TUINT16, // same size
		gc.TUINT16<<16 | gc.TUINT16,
		gc.TINT32<<16 | gc.TUINT16,
		// truncate
		gc.TUINT32<<16 | gc.TUINT16,
		gc.TINT64<<16 | gc.TUINT16,
		gc.TUINT64<<16 | gc.TUINT16:
		a = arm64.AMOVHU

	case gc.TINT32<<16 | gc.TINT32, // same size
		gc.TUINT32<<16 | gc.TINT32,
		gc.TINT64<<16 | gc.TINT32,
		// truncate
		gc.TUINT64<<16 | gc.TINT32:
		a = arm64.AMOVW

	case gc.TINT32<<16 | gc.TUINT32, // same size
		gc.TUINT32<<16 | gc.TUINT32,
		gc.TINT64<<16 | gc.TUINT32,
		gc.TUINT64<<16 | gc.TUINT32:
		a = arm64.AMOVWU

	case gc.TINT64<<16 | gc.TINT64, // same size
		gc.TINT64<<16 | gc.TUINT64,
		gc.TUINT64<<16 | gc.TINT64,
		gc.TUINT64<<16 | gc.TUINT64:
		a = arm64.AMOVD

		/*
		 * integer up-conversions
		 */
	case gc.TINT8<<16 | gc.TINT16, // sign extend int8
		gc.TINT8<<16 | gc.TUINT16,
		gc.TINT8<<16 | gc.TINT32,
		gc.TINT8<<16 | gc.TUINT32,
		gc.TINT8<<16 | gc.TINT64,
		gc.TINT8<<16 | gc.TUINT64:
		a = arm64.AMOVB

		goto rdst

	case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
		gc.TUINT8<<16 | gc.TUINT16,
		gc.TUINT8<<16 | gc.TINT32,
		gc.TUINT8<<16 | gc.TUINT32,
		gc.TUINT8<<16 | gc.TINT64,
		gc.TUINT8<<16 | gc.TUINT64:
		a = arm64.AMOVBU

		goto rdst

	case gc.TINT16<<16 | gc.TINT32, // sign extend int16
		gc.TINT16<<16 | gc.TUINT32,
		gc.TINT16<<16 | gc.TINT64,
		gc.TINT16<<16 | gc.TUINT64:
		a = arm64.AMOVH

		goto rdst

	case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
		gc.TUINT16<<16 | gc.TUINT32,
		gc.TUINT16<<16 | gc.TINT64,
		gc.TUINT16<<16 | gc.TUINT64:
		a = arm64.AMOVHU

		goto rdst

	case gc.TINT32<<16 | gc.TINT64, // sign extend int32
		gc.TINT32<<16 | gc.TUINT64:
		a = arm64.AMOVW

		goto rdst

	case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
		gc.TUINT32<<16 | gc.TUINT64:
		a = arm64.AMOVWU

		goto rdst

	/*
	* float to integer
	 */
	case gc.TFLOAT32<<16 | gc.TINT32:
		a = arm64.AFCVTZSSW
		goto rdst

	case gc.TFLOAT64<<16 | gc.TINT32:
		a = arm64.AFCVTZSDW
		goto rdst

	case gc.TFLOAT32<<16 | gc.TINT64:
		a = arm64.AFCVTZSS
		goto rdst

	case gc.TFLOAT64<<16 | gc.TINT64:
		a = arm64.AFCVTZSD
		goto rdst

	case gc.TFLOAT32<<16 | gc.TUINT32:
		a = arm64.AFCVTZUSW
		goto rdst

	case gc.TFLOAT64<<16 | gc.TUINT32:
		a = arm64.AFCVTZUDW
		goto rdst

	case gc.TFLOAT32<<16 | gc.TUINT64:
		a = arm64.AFCVTZUS
		goto rdst

	case gc.TFLOAT64<<16 | gc.TUINT64:
		a = arm64.AFCVTZUD
		goto rdst

	case gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TINT8:
		cvt = gc.Types[gc.TINT32]

		goto hard

	case gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TUINT8:
		cvt = gc.Types[gc.TUINT32]

		goto hard

	/*
	 * integer to float
	 */
	case gc.TINT8<<16 | gc.TFLOAT32,
		gc.TINT16<<16 | gc.TFLOAT32,
		gc.TINT32<<16 | gc.TFLOAT32:
		a = arm64.ASCVTFWS

		goto rdst

	case gc.TINT8<<16 | gc.TFLOAT64,
		gc.TINT16<<16 | gc.TFLOAT64,
		gc.TINT32<<16 | gc.TFLOAT64:
		a = arm64.ASCVTFWD

		goto rdst

	case gc.TINT64<<16 | gc.TFLOAT32:
		a = arm64.ASCVTFS
		goto rdst

	case gc.TINT64<<16 | gc.TFLOAT64:
		a = arm64.ASCVTFD
		goto rdst

	case gc.TUINT8<<16 | gc.TFLOAT32,
		gc.TUINT16<<16 | gc.TFLOAT32,
		gc.TUINT32<<16 | gc.TFLOAT32:
		a = arm64.AUCVTFWS

		goto rdst

	case gc.TUINT8<<16 | gc.TFLOAT64,
		gc.TUINT16<<16 | gc.TFLOAT64,
		gc.TUINT32<<16 | gc.TFLOAT64:
		a = arm64.AUCVTFWD

		goto rdst

	case gc.TUINT64<<16 | gc.TFLOAT32:
		a = arm64.AUCVTFS
		goto rdst

	case gc.TUINT64<<16 | gc.TFLOAT64:
		a = arm64.AUCVTFD
		goto rdst

		/*
		 * float to float
		 */
	case gc.TFLOAT32<<16 | gc.TFLOAT32:
		a = arm64.AFMOVS

	case gc.TFLOAT64<<16 | gc.TFLOAT64:
		a = arm64.AFMOVD

	case gc.TFLOAT32<<16 | gc.TFLOAT64:
		a = arm64.AFCVTSD
		goto rdst

	case gc.TFLOAT64<<16 | gc.TFLOAT32:
		a = arm64.AFCVTDS
		goto rdst
	}

	gins(a, f, t)
	return

	// requires register destination
rdst:
	regalloc(&r1, t.Type, t)

	gins(a, f, &r1)
	gmove(&r1, t)
	regfree(&r1)
	return

	// requires register intermediate
hard:
	regalloc(&r1, cvt, t)

	gmove(f, &r1)
	gmove(&r1, t)
	regfree(&r1)
	return
}

/*
 * generate one instruction:
 *	as f, t
 */
func gins(as int, f *gc.Node, t *gc.Node) *obj.Prog {
	// TODO(austin): Add self-move test like in 6g (but be careful
	// of truncation moves)

	af := obj.Addr(obj.Addr{})

	at := obj.Addr(obj.Addr{})
	if f != nil {
		af = gc.Naddr(f)
	}
	if t != nil {
		at = gc.Naddr(t)
	}
	p := (*obj.Prog)(gc.Prog(as))
	if f != nil {
		p.From = af
	}
	if t != nil {
		p.To = at
	}
	if gc.Debug['g'] != 0 {
		fmt.Printf("%v\n", p)
	}

	w := int32(0)
	switch as {
	case arm64.AMOVB,
		arm64.AMOVBU:
		w = 1

	case arm64.AMOVH,
		arm64.AMOVHU:
		w = 2

	case arm64.AMOVW,
		arm64.AMOVWU:
		w = 4

	case arm64.AMOVD:
		if af.Type == obj.TYPE_CONST || af.Type == obj.TYPE_ADDR {
			break
		}
		w = 8
	}

	if w != 0 && ((f != nil && af.Width < int64(w)) || (t != nil && at.Type != obj.TYPE_REG && at.Width > int64(w))) {
		gc.Dump("f", f)
		gc.Dump("t", t)
		gc.Fatal("bad width: %v (%d, %d)\n", p, af.Width, at.Width)
	}

	return p
}

func fixlargeoffset(n *gc.Node) {
	if n == nil {
		return
	}
	if n.Op != gc.OINDREG {
		return
	}
	if -4096 <= n.Xoffset && n.Xoffset < 4096 {
		return
	}
	a := gc.Node(*n)
	a.Op = gc.OREGISTER
	a.Type = gc.Types[gc.Tptr]
	a.Xoffset = 0
	gc.Cgen_checknil(&a)
	ginscon(optoas(gc.OADD, gc.Types[gc.Tptr]), n.Xoffset, &a)
	n.Xoffset = 0
}

/*
 * insert n into reg slot of p
 */
func raddr(n *gc.Node, p *obj.Prog) {
	var a obj.Addr

	a = gc.Naddr(n)
	if a.Type != obj.TYPE_REG {
		if n != nil {
			gc.Fatal("bad in raddr: %v", gc.Oconv(int(n.Op), 0))
		} else {
			gc.Fatal("bad in raddr: <null>")
		}
		p.Reg = 0
	} else {
		p.Reg = a.Reg
	}
}

func gcmp(as int, lhs *gc.Node, rhs *gc.Node) *obj.Prog {
	if lhs.Op != gc.OREGISTER {
		gc.Fatal("bad operands to gcmp: %v %v", gc.Oconv(int(lhs.Op), 0), gc.Oconv(int(rhs.Op), 0))
	}

	p := gins(as, rhs, nil)
	raddr(lhs, p)
	return p
}

/*
 * return Axxx for Oxxx on type t.
 */
func optoas(op int, t *gc.Type) int {
	if t == nil {
		gc.Fatal("optoas: t is nil")
	}

	a := int(obj.AXXX)
	switch uint32(op)<<16 | uint32(gc.Simtype[t.Etype]) {
	default:
		gc.Fatal("optoas: no entry for op=%v type=%v", gc.Oconv(int(op), 0), gc.Tconv(t, 0))

	case gc.OEQ<<16 | gc.TBOOL,
		gc.OEQ<<16 | gc.TINT8,
		gc.OEQ<<16 | gc.TUINT8,
		gc.OEQ<<16 | gc.TINT16,
		gc.OEQ<<16 | gc.TUINT16,
		gc.OEQ<<16 | gc.TINT32,
		gc.OEQ<<16 | gc.TUINT32,
		gc.OEQ<<16 | gc.TINT64,
		gc.OEQ<<16 | gc.TUINT64,
		gc.OEQ<<16 | gc.TPTR32,
		gc.OEQ<<16 | gc.TPTR64,
		gc.OEQ<<16 | gc.TFLOAT32,
		gc.OEQ<<16 | gc.TFLOAT64:
		a = arm64.ABEQ

	case gc.ONE<<16 | gc.TBOOL,
		gc.ONE<<16 | gc.TINT8,
		gc.ONE<<16 | gc.TUINT8,
		gc.ONE<<16 | gc.TINT16,
		gc.ONE<<16 | gc.TUINT16,
		gc.ONE<<16 | gc.TINT32,
		gc.ONE<<16 | gc.TUINT32,
		gc.ONE<<16 | gc.TINT64,
		gc.ONE<<16 | gc.TUINT64,
		gc.ONE<<16 | gc.TPTR32,
		gc.ONE<<16 | gc.TPTR64,
		gc.ONE<<16 | gc.TFLOAT32,
		gc.ONE<<16 | gc.TFLOAT64:
		a = arm64.ABNE

	case gc.OLT<<16 | gc.TINT8,
		gc.OLT<<16 | gc.TINT16,
		gc.OLT<<16 | gc.TINT32,
		gc.OLT<<16 | gc.TINT64:
		a = arm64.ABLT

	case gc.OLT<<16 | gc.TUINT8,
		gc.OLT<<16 | gc.TUINT16,
		gc.OLT<<16 | gc.TUINT32,
		gc.OLT<<16 | gc.TUINT64,
		gc.OLT<<16 | gc.TFLOAT32,
		gc.OLT<<16 | gc.TFLOAT64:
		a = arm64.ABLO

	case gc.OLE<<16 | gc.TINT8,
		gc.OLE<<16 | gc.TINT16,
		gc.OLE<<16 | gc.TINT32,
		gc.OLE<<16 | gc.TINT64:
		a = arm64.ABLE

	case gc.OLE<<16 | gc.TUINT8,
		gc.OLE<<16 | gc.TUINT16,
		gc.OLE<<16 | gc.TUINT32,
		gc.OLE<<16 | gc.TUINT64,
		gc.OLE<<16 | gc.TFLOAT32,
		gc.OLE<<16 | gc.TFLOAT64:
		a = arm64.ABLS

	case gc.OGT<<16 | gc.TINT8,
		gc.OGT<<16 | gc.TINT16,
		gc.OGT<<16 | gc.TINT32,
		gc.OGT<<16 | gc.TINT64,
		gc.OGT<<16 | gc.TFLOAT32,
		gc.OGT<<16 | gc.TFLOAT64:
		a = arm64.ABGT

	case gc.OGT<<16 | gc.TUINT8,
		gc.OGT<<16 | gc.TUINT16,
		gc.OGT<<16 | gc.TUINT32,
		gc.OGT<<16 | gc.TUINT64:
		a = arm64.ABHI

	case gc.OGE<<16 | gc.TINT8,
		gc.OGE<<16 | gc.TINT16,
		gc.OGE<<16 | gc.TINT32,
		gc.OGE<<16 | gc.TINT64,
		gc.OGE<<16 | gc.TFLOAT32,
		gc.OGE<<16 | gc.TFLOAT64:
		a = arm64.ABGE

	case gc.OGE<<16 | gc.TUINT8,
		gc.OGE<<16 | gc.TUINT16,
		gc.OGE<<16 | gc.TUINT32,
		gc.OGE<<16 | gc.TUINT64:
		a = arm64.ABHS

	case gc.OCMP<<16 | gc.TBOOL,
		gc.OCMP<<16 | gc.TINT8,
		gc.OCMP<<16 | gc.TINT16,
		gc.OCMP<<16 | gc.TINT32,
		gc.OCMP<<16 | gc.TPTR32,
		gc.OCMP<<16 | gc.TINT64,
		gc.OCMP<<16 | gc.TUINT8,
		gc.OCMP<<16 | gc.TUINT16,
		gc.OCMP<<16 | gc.TUINT32,
		gc.OCMP<<16 | gc.TUINT64,
		gc.OCMP<<16 | gc.TPTR64:
		a = arm64.ACMP

	case gc.OCMP<<16 | gc.TFLOAT32:
		a = arm64.AFCMPS

	case gc.OCMP<<16 | gc.TFLOAT64:
		a = arm64.AFCMPD

	case gc.OAS<<16 | gc.TBOOL,
		gc.OAS<<16 | gc.TINT8:
		a = arm64.AMOVB

	case gc.OAS<<16 | gc.TUINT8:
		a = arm64.AMOVBU

	case gc.OAS<<16 | gc.TINT16:
		a = arm64.AMOVH

	case gc.OAS<<16 | gc.TUINT16:
		a = arm64.AMOVHU

	case gc.OAS<<16 | gc.TINT32:
		a = arm64.AMOVW

	case gc.OAS<<16 | gc.TUINT32,
		gc.OAS<<16 | gc.TPTR32:
		a = arm64.AMOVWU

	case gc.OAS<<16 | gc.TINT64,
		gc.OAS<<16 | gc.TUINT64,
		gc.OAS<<16 | gc.TPTR64:
		a = arm64.AMOVD

	case gc.OAS<<16 | gc.TFLOAT32:
		a = arm64.AFMOVS

	case gc.OAS<<16 | gc.TFLOAT64:
		a = arm64.AFMOVD

	case gc.OADD<<16 | gc.TINT8,
		gc.OADD<<16 | gc.TUINT8,
		gc.OADD<<16 | gc.TINT16,
		gc.OADD<<16 | gc.TUINT16,
		gc.OADD<<16 | gc.TINT32,
		gc.OADD<<16 | gc.TUINT32,
		gc.OADD<<16 | gc.TPTR32,
		gc.OADD<<16 | gc.TINT64,
		gc.OADD<<16 | gc.TUINT64,
		gc.OADD<<16 | gc.TPTR64:
		a = arm64.AADD

	case gc.OADD<<16 | gc.TFLOAT32:
		a = arm64.AFADDS

	case gc.OADD<<16 | gc.TFLOAT64:
		a = arm64.AFADDD

	case gc.OSUB<<16 | gc.TINT8,
		gc.OSUB<<16 | gc.TUINT8,
		gc.OSUB<<16 | gc.TINT16,
		gc.OSUB<<16 | gc.TUINT16,
		gc.OSUB<<16 | gc.TINT32,
		gc.OSUB<<16 | gc.TUINT32,
		gc.OSUB<<16 | gc.TPTR32,
		gc.OSUB<<16 | gc.TINT64,
		gc.OSUB<<16 | gc.TUINT64,
		gc.OSUB<<16 | gc.TPTR64:
		a = arm64.ASUB

	case gc.OSUB<<16 | gc.TFLOAT32:
		a = arm64.AFSUBS

	case gc.OSUB<<16 | gc.TFLOAT64:
		a = arm64.AFSUBD

	case gc.OMINUS<<16 | gc.TINT8,
		gc.OMINUS<<16 | gc.TUINT8,
		gc.OMINUS<<16 | gc.TINT16,
		gc.OMINUS<<16 | gc.TUINT16,
		gc.OMINUS<<16 | gc.TINT32,
		gc.OMINUS<<16 | gc.TUINT32,
		gc.OMINUS<<16 | gc.TPTR32,
		gc.OMINUS<<16 | gc.TINT64,
		gc.OMINUS<<16 | gc.TUINT64,
		gc.OMINUS<<16 | gc.TPTR64:
		a = arm64.ANEG

	case gc.OMINUS<<16 | gc.TFLOAT32:
		a = arm64.AFNEGS

	case gc.OMINUS<<16 | gc.TFLOAT64:
		a = arm64.AFNEGD

	case gc.OAND<<16 | gc.TINT8,
		gc.OAND<<16 | gc.TUINT8,
		gc.OAND<<16 | gc.TINT16,
		gc.OAND<<16 | gc.TUINT16,
		gc.OAND<<16 | gc.TINT32,
		gc.OAND<<16 | gc.TUINT32,
		gc.OAND<<16 | gc.TPTR32,
		gc.OAND<<16 | gc.TINT64,
		gc.OAND<<16 | gc.TUINT64,
		gc.OAND<<16 | gc.TPTR64:
		a = arm64.AAND

	case gc.OOR<<16 | gc.TINT8,
		gc.OOR<<16 | gc.TUINT8,
		gc.OOR<<16 | gc.TINT16,
		gc.OOR<<16 | gc.TUINT16,
		gc.OOR<<16 | gc.TINT32,
		gc.OOR<<16 | gc.TUINT32,
		gc.OOR<<16 | gc.TPTR32,
		gc.OOR<<16 | gc.TINT64,
		gc.OOR<<16 | gc.TUINT64,
		gc.OOR<<16 | gc.TPTR64:
		a = arm64.AORR

	case gc.OXOR<<16 | gc.TINT8,
		gc.OXOR<<16 | gc.TUINT8,
		gc.OXOR<<16 | gc.TINT16,
		gc.OXOR<<16 | gc.TUINT16,
		gc.OXOR<<16 | gc.TINT32,
		gc.OXOR<<16 | gc.TUINT32,
		gc.OXOR<<16 | gc.TPTR32,
		gc.OXOR<<16 | gc.TINT64,
		gc.OXOR<<16 | gc.TUINT64,
		gc.OXOR<<16 | gc.TPTR64:
		a = arm64.AEOR

		// TODO(minux): handle rotates
	//case CASE(OLROT, TINT8):
	//case CASE(OLROT, TUINT8):
	//case CASE(OLROT, TINT16):
	//case CASE(OLROT, TUINT16):
	//case CASE(OLROT, TINT32):
	//case CASE(OLROT, TUINT32):
	//case CASE(OLROT, TPTR32):
	//case CASE(OLROT, TINT64):
	//case CASE(OLROT, TUINT64):
	//case CASE(OLROT, TPTR64):
	//	a = 0//???; RLDC?
	//	break;

	case gc.OLSH<<16 | gc.TINT8,
		gc.OLSH<<16 | gc.TUINT8,
		gc.OLSH<<16 | gc.TINT16,
		gc.OLSH<<16 | gc.TUINT16,
		gc.OLSH<<16 | gc.TINT32,
		gc.OLSH<<16 | gc.TUINT32,
		gc.OLSH<<16 | gc.TPTR32,
		gc.OLSH<<16 | gc.TINT64,
		gc.OLSH<<16 | gc.TUINT64,
		gc.OLSH<<16 | gc.TPTR64:
		a = arm64.ALSL

	case gc.ORSH<<16 | gc.TUINT8,
		gc.ORSH<<16 | gc.TUINT16,
		gc.ORSH<<16 | gc.TUINT32,
		gc.ORSH<<16 | gc.TPTR32,
		gc.ORSH<<16 | gc.TUINT64,
		gc.ORSH<<16 | gc.TPTR64:
		a = arm64.ALSR

	case gc.ORSH<<16 | gc.TINT8,
		gc.ORSH<<16 | gc.TINT16,
		gc.ORSH<<16 | gc.TINT32,
		gc.ORSH<<16 | gc.TINT64:
		a = arm64.AASR

		// TODO(minux): handle rotates
	//case CASE(ORROTC, TINT8):
	//case CASE(ORROTC, TUINT8):
	//case CASE(ORROTC, TINT16):
	//case CASE(ORROTC, TUINT16):
	//case CASE(ORROTC, TINT32):
	//case CASE(ORROTC, TUINT32):
	//case CASE(ORROTC, TINT64):
	//case CASE(ORROTC, TUINT64):
	//	a = 0//??? RLDC??
	//	break;

	case gc.OHMUL<<16 | gc.TINT64:
		a = arm64.ASMULH

	case gc.OHMUL<<16 | gc.TUINT64,
		gc.OHMUL<<16 | gc.TPTR64:
		a = arm64.AUMULH

	case gc.OMUL<<16 | gc.TINT8,
		gc.OMUL<<16 | gc.TINT16,
		gc.OMUL<<16 | gc.TINT32:
		a = arm64.ASMULL

	case gc.OMUL<<16 | gc.TINT64:
		a = arm64.AMUL

	case gc.OMUL<<16 | gc.TUINT8,
		gc.OMUL<<16 | gc.TUINT16,
		gc.OMUL<<16 | gc.TUINT32,
		gc.OMUL<<16 | gc.TPTR32:
		// don't use word multiply, the high 32-bit are undefined.
		a = arm64.AUMULL

	case gc.OMUL<<16 | gc.TUINT64,
		gc.OMUL<<16 | gc.TPTR64:
		a = arm64.AMUL // for 64-bit multiplies, signedness doesn't matter.

	case gc.OMUL<<16 | gc.TFLOAT32:
		a = arm64.AFMULS

	case gc.OMUL<<16 | gc.TFLOAT64:
		a = arm64.AFMULD

	case gc.ODIV<<16 | gc.TINT8,
		gc.ODIV<<16 | gc.TINT16,
		gc.ODIV<<16 | gc.TINT32,
		gc.ODIV<<16 | gc.TINT64:
		a = arm64.ASDIV

	case gc.ODIV<<16 | gc.TUINT8,
		gc.ODIV<<16 | gc.TUINT16,
		gc.ODIV<<16 | gc.TUINT32,
		gc.ODIV<<16 | gc.TPTR32,
		gc.ODIV<<16 | gc.TUINT64,
		gc.ODIV<<16 | gc.TPTR64:
		a = arm64.AUDIV

	case gc.ODIV<<16 | gc.TFLOAT32:
		a = arm64.AFDIVS

	case gc.ODIV<<16 | gc.TFLOAT64:
		a = arm64.AFDIVD
	}

	return a
}

const (
	ODynam   = 1 << 0
	OAddable = 1 << 1
)

func xgen(n *gc.Node, a *gc.Node, o int) bool {
	// TODO(minux)

	return -1 != 0 /*TypeKind(100016)*/
}

func sudoclean() {
	return
}

/*
 * generate code to compute address of n,
 * a reference to a (perhaps nested) field inside
 * an array or struct.
 * return 0 on failure, 1 on success.
 * on success, leaves usable address in a.
 *
 * caller is responsible for calling sudoclean
 * after successful sudoaddable,
 * to release the register used for a.
 */
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
	// TODO(minux)

	*a = obj.Addr{}
	return false
}
Example #17
0
/*
 * generate:
 *	if(n == true) goto to;
 */
func bgen(n *gc.Node, true_ bool, likely int, to *obj.Prog) {
	if gc.Debug['g'] != 0 {
		gc.Dump("\nbgen", n)
	}

	if n == nil {
		n = gc.Nodbool(true)
	}

	if n.Ninit != nil {
		gc.Genlist(n.Ninit)
	}

	if n.Type == nil {
		gc.Convlit(&n, gc.Types[gc.TBOOL])
		if n.Type == nil {
			return
		}
	}

	et := int(n.Type.Etype)
	if et != gc.TBOOL {
		gc.Yyerror("cgen: bad type %v for %v", gc.Tconv(n.Type, 0), gc.Oconv(int(n.Op), 0))
		gc.Patch(gins(obj.AEND, nil, nil), to)
		return
	}

	var nr *gc.Node

	for n.Op == gc.OCONVNOP {
		n = n.Left
		if n.Ninit != nil {
			gc.Genlist(n.Ninit)
		}
	}

	var nl *gc.Node
	switch n.Op {
	default:
		var n1 gc.Node
		regalloc(&n1, n.Type, nil)
		cgen(n, &n1)
		var n2 gc.Node
		gc.Nodconst(&n2, n.Type, 0)
		gins(optoas(gc.OCMP, n.Type), &n1, &n2)
		a := ppc64.ABNE
		if !true_ {
			a = ppc64.ABEQ
		}
		gc.Patch(gc.Gbranch(a, n.Type, likely), to)
		regfree(&n1)
		return

		// need to ask if it is bool?
	case gc.OLITERAL:
		if !true_ == (n.Val.U.Bval == 0) {
			gc.Patch(gc.Gbranch(ppc64.ABR, nil, likely), to)
		}
		return

	case gc.OANDAND,
		gc.OOROR:
		if (n.Op == gc.OANDAND) == true_ {
			p1 := gc.Gbranch(obj.AJMP, nil, 0)
			p2 := gc.Gbranch(obj.AJMP, nil, 0)
			gc.Patch(p1, gc.Pc)
			bgen(n.Left, !true_, -likely, p2)
			bgen(n.Right, !true_, -likely, p2)
			p1 = gc.Gbranch(obj.AJMP, nil, 0)
			gc.Patch(p1, to)
			gc.Patch(p2, gc.Pc)
		} else {
			bgen(n.Left, true_, likely, to)
			bgen(n.Right, true_, likely, to)
		}

		return

	case gc.OEQ,
		gc.ONE,
		gc.OLT,
		gc.OGT,
		gc.OLE,
		gc.OGE:
		nr = n.Right
		if nr == nil || nr.Type == nil {
			return
		}
		fallthrough

	case gc.ONOT: // unary
		nl = n.Left

		if nl == nil || nl.Type == nil {
			return
		}
	}

	switch n.Op {
	case gc.ONOT:
		bgen(nl, !true_, likely, to)
		return

	case gc.OEQ,
		gc.ONE,
		gc.OLT,
		gc.OGT,
		gc.OLE,
		gc.OGE:
		a := int(n.Op)
		if !true_ {
			if gc.Isfloat[nr.Type.Etype] {
				// brcom is not valid on floats when NaN is involved.
				p1 := gc.Gbranch(ppc64.ABR, nil, 0)

				p2 := gc.Gbranch(ppc64.ABR, nil, 0)
				gc.Patch(p1, gc.Pc)
				ll := n.Ninit // avoid re-genning ninit
				n.Ninit = nil
				bgen(n, true, -likely, p2)
				n.Ninit = ll
				gc.Patch(gc.Gbranch(ppc64.ABR, nil, 0), to)
				gc.Patch(p2, gc.Pc)
				return
			}

			a = gc.Brcom(a)
			true_ = !true_
		}

		// make simplest on right
		if nl.Op == gc.OLITERAL || (nl.Ullman < nr.Ullman && nl.Ullman < gc.UINF) {
			a = gc.Brrev(a)
			r := nl
			nl = nr
			nr = r
		}

		if gc.Isslice(nl.Type) {
			// front end should only leave cmp to literal nil
			if (a != gc.OEQ && a != gc.ONE) || nr.Op != gc.OLITERAL {
				gc.Yyerror("illegal slice comparison")
				break
			}

			a = optoas(a, gc.Types[gc.Tptr])
			var n1 gc.Node
			igen(nl, &n1, nil)
			n1.Xoffset += int64(gc.Array_array)
			n1.Type = gc.Types[gc.Tptr]
			var tmp gc.Node
			gc.Nodconst(&tmp, gc.Types[gc.Tptr], 0)
			var n2 gc.Node
			regalloc(&n2, gc.Types[gc.Tptr], &n1)
			gmove(&n1, &n2)
			gins(optoas(gc.OCMP, gc.Types[gc.Tptr]), &n2, &tmp)
			regfree(&n2)
			gc.Patch(gc.Gbranch(a, gc.Types[gc.Tptr], likely), to)
			regfree(&n1)
			break
		}

		if gc.Isinter(nl.Type) {
			// front end should only leave cmp to literal nil
			if (a != gc.OEQ && a != gc.ONE) || nr.Op != gc.OLITERAL {
				gc.Yyerror("illegal interface comparison")
				break
			}

			a = optoas(a, gc.Types[gc.Tptr])
			var n1 gc.Node
			igen(nl, &n1, nil)
			n1.Type = gc.Types[gc.Tptr]
			var tmp gc.Node
			gc.Nodconst(&tmp, gc.Types[gc.Tptr], 0)
			var n2 gc.Node
			regalloc(&n2, gc.Types[gc.Tptr], &n1)
			gmove(&n1, &n2)
			gins(optoas(gc.OCMP, gc.Types[gc.Tptr]), &n2, &tmp)
			regfree(&n2)
			gc.Patch(gc.Gbranch(a, gc.Types[gc.Tptr], likely), to)
			regfree(&n1)
			break
		}

		if gc.Iscomplex[nl.Type.Etype] {
			gc.Complexbool(a, nl, nr, true_, likely, to)
			break
		}

		var n1 gc.Node
		var n2 gc.Node
		if nr.Ullman >= gc.UINF {
			regalloc(&n1, nl.Type, nil)
			cgen(nl, &n1)

			var tmp gc.Node
			gc.Tempname(&tmp, nl.Type)
			gmove(&n1, &tmp)
			regfree(&n1)

			regalloc(&n2, nr.Type, nil)
			cgen(nr, &n2)

			regalloc(&n1, nl.Type, nil)
			cgen(&tmp, &n1)

			goto cmp
		}

		regalloc(&n1, nl.Type, nil)
		cgen(nl, &n1)

		// TODO(minux): cmpi does accept 16-bit signed immediate as p->to.
		// and cmpli accepts 16-bit unsigned immediate.
		//if(smallintconst(nr)) {
		//	gins(optoas(OCMP, nr->type), &n1, nr);
		//	patch(gbranch(optoas(a, nr->type), nr->type, likely), to);
		//	regfree(&n1);
		//	break;
		//}

		regalloc(&n2, nr.Type, nil)

		cgen(nr, &n2)

	cmp:
		l := &n1
		r := &n2
		gins(optoas(gc.OCMP, nr.Type), l, r)
		if gc.Isfloat[nr.Type.Etype] && (a == gc.OLE || a == gc.OGE) {
			// To get NaN right, must rewrite x <= y into separate x < y or x = y.
			switch a {
			case gc.OLE:
				a = gc.OLT

			case gc.OGE:
				a = gc.OGT
			}

			gc.Patch(gc.Gbranch(optoas(a, nr.Type), nr.Type, likely), to)
			gc.Patch(gc.Gbranch(optoas(gc.OEQ, nr.Type), nr.Type, likely), to)
		} else {
			gc.Patch(gc.Gbranch(optoas(a, nr.Type), nr.Type, likely), to)
		}

		regfree(&n1)
		regfree(&n2)
	}

	return
}
Example #18
0
File: cgen.go Project: tidatida/go
func stackcopy(n, res *gc.Node, osrc, odst, w int64) {
	var dst gc.Node
	gc.Nodreg(&dst, gc.Types[gc.Tptr], x86.REG_DI)
	var src gc.Node
	gc.Nodreg(&src, gc.Types[gc.Tptr], x86.REG_SI)

	var tsrc gc.Node
	gc.Tempname(&tsrc, gc.Types[gc.Tptr])
	var tdst gc.Node
	gc.Tempname(&tdst, gc.Types[gc.Tptr])
	if n.Addable == 0 {
		gc.Agen(n, &tsrc)
	}
	if res.Addable == 0 {
		gc.Agen(res, &tdst)
	}
	if n.Addable != 0 {
		gc.Agen(n, &src)
	} else {
		gmove(&tsrc, &src)
	}

	if res.Op == gc.ONAME {
		gc.Gvardef(res)
	}

	if res.Addable != 0 {
		gc.Agen(res, &dst)
	} else {
		gmove(&tdst, &dst)
	}

	c := int32(w % 4) // bytes
	q := int32(w / 4) // doublewords

	// if we are copying forward on the stack and
	// the src and dst overlap, then reverse direction
	if osrc < odst && int64(odst) < int64(osrc)+w {
		// reverse direction
		gins(x86.ASTD, nil, nil) // set direction flag
		if c > 0 {
			gconreg(x86.AADDL, w-1, x86.REG_SI)
			gconreg(x86.AADDL, w-1, x86.REG_DI)

			gconreg(x86.AMOVL, int64(c), x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
		}

		if q > 0 {
			if c > 0 {
				gconreg(x86.AADDL, -3, x86.REG_SI)
				gconreg(x86.AADDL, -3, x86.REG_DI)
			} else {
				gconreg(x86.AADDL, w-4, x86.REG_SI)
				gconreg(x86.AADDL, w-4, x86.REG_DI)
			}

			gconreg(x86.AMOVL, int64(q), x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSL, nil, nil) // MOVL *(SI)-,*(DI)-
		}

		// we leave with the flag clear
		gins(x86.ACLD, nil, nil)
	} else {
		gins(x86.ACLD, nil, nil) // paranoia.  TODO(rsc): remove?

		// normal direction
		if q > 128 || (q >= 4 && gc.Nacl) {
			gconreg(x86.AMOVL, int64(q), x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSL, nil, nil) // MOVL *(SI)+,*(DI)+
		} else if q >= 4 {
			p := gins(obj.ADUFFCOPY, nil, nil)
			p.To.Type = obj.TYPE_ADDR
			p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))

			// 10 and 128 = magic constants: see ../../runtime/asm_386.s
			p.To.Offset = 10 * (128 - int64(q))
		} else if !gc.Nacl && c == 0 {
			var cx gc.Node
			gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)

			// We don't need the MOVSL side-effect of updating SI and DI,
			// and issuing a sequence of MOVLs directly is faster.
			src.Op = gc.OINDREG

			dst.Op = gc.OINDREG
			for q > 0 {
				gmove(&src, &cx) // MOVL x+(SI),CX
				gmove(&cx, &dst) // MOVL CX,x+(DI)
				src.Xoffset += 4
				dst.Xoffset += 4
				q--
			}
		} else {
			for q > 0 {
				gins(x86.AMOVSL, nil, nil) // MOVL *(SI)+,*(DI)+
				q--
			}
		}

		for c > 0 {
			gins(x86.AMOVSB, nil, nil) // MOVB *(SI)+,*(DI)+
			c--
		}
	}
}
Example #19
0
/*
 * attempt to generate 64-bit
 *	res = n
 * return 1 on success, 0 if op not handled.
 */
func cgen64(n *gc.Node, res *gc.Node) {
	if res.Op != gc.OINDREG && res.Op != gc.ONAME {
		gc.Dump("n", n)
		gc.Dump("res", res)
		gc.Fatal("cgen64 %v of %v", gc.Oconv(int(n.Op), 0), gc.Oconv(int(res.Op), 0))
	}

	switch n.Op {
	default:
		gc.Fatal("cgen64 %v", gc.Oconv(int(n.Op), 0))

	case gc.OMINUS:
		gc.Cgen(n.Left, res)
		var hi1 gc.Node
		var lo1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANEGL, nil, &lo1)
		gins(x86.AADCL, ncon(0), &hi1)
		gins(x86.ANEGL, nil, &hi1)
		splitclean()
		return

	case gc.OCOM:
		gc.Cgen(n.Left, res)
		var lo1 gc.Node
		var hi1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANOTL, nil, &lo1)
		gins(x86.ANOTL, nil, &hi1)
		splitclean()
		return

		// binary operators.
	// common setup below.
	case gc.OADD,
		gc.OSUB,
		gc.OMUL,
		gc.OLROT,
		gc.OLSH,
		gc.ORSH,
		gc.OAND,
		gc.OOR,
		gc.OXOR:
		break
	}

	l := n.Left
	r := n.Right
	if !l.Addable {
		var t1 gc.Node
		gc.Tempname(&t1, l.Type)
		gc.Cgen(l, &t1)
		l = &t1
	}

	if r != nil && !r.Addable {
		var t2 gc.Node
		gc.Tempname(&t2, r.Type)
		gc.Cgen(r, &t2)
		r = &t2
	}

	var ax gc.Node
	gc.Nodreg(&ax, gc.Types[gc.TINT32], x86.REG_AX)
	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)
	var dx gc.Node
	gc.Nodreg(&dx, gc.Types[gc.TINT32], x86.REG_DX)

	// Setup for binary operation.
	var hi1 gc.Node
	var lo1 gc.Node
	split64(l, &lo1, &hi1)

	var lo2 gc.Node
	var hi2 gc.Node
	if gc.Is64(r.Type) {
		split64(r, &lo2, &hi2)
	}

	// Do op.  Leave result in DX:AX.
	switch n.Op {
	// TODO: Constants
	case gc.OADD:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
		gins(x86.AADDL, &lo2, &ax)
		gins(x86.AADCL, &hi2, &dx)

		// TODO: Constants.
	case gc.OSUB:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
		gins(x86.ASUBL, &lo2, &ax)
		gins(x86.ASBBL, &hi2, &dx)

		// let's call the next two EX and FX.
	case gc.OMUL:
		var ex gc.Node
		gc.Regalloc(&ex, gc.Types[gc.TPTR32], nil)

		var fx gc.Node
		gc.Regalloc(&fx, gc.Types[gc.TPTR32], nil)

		// load args into DX:AX and EX:CX.
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
		gins(x86.AMOVL, &lo2, &cx)
		gins(x86.AMOVL, &hi2, &ex)

		// if DX and EX are zero, use 32 x 32 -> 64 unsigned multiply.
		gins(x86.AMOVL, &dx, &fx)

		gins(x86.AORL, &ex, &fx)
		p1 := gc.Gbranch(x86.AJNE, nil, 0)
		gins(x86.AMULL, &cx, nil) // implicit &ax
		p2 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)

		// full 64x64 -> 64, from 32x32 -> 64.
		gins(x86.AIMULL, &cx, &dx)

		gins(x86.AMOVL, &ax, &fx)
		gins(x86.AIMULL, &ex, &fx)
		gins(x86.AADDL, &dx, &fx)
		gins(x86.AMOVL, &cx, &dx)
		gins(x86.AMULL, &dx, nil) // implicit &ax
		gins(x86.AADDL, &fx, &dx)
		gc.Patch(p2, gc.Pc)

		gc.Regfree(&ex)
		gc.Regfree(&fx)

		// We only rotate by a constant c in [0,64).
	// if c >= 32:
	//	lo, hi = hi, lo
	//	c -= 32
	// if c == 0:
	//	no-op
	// else:
	//	t = hi
	//	shld hi:lo, c
	//	shld lo:t, c
	case gc.OLROT:
		v := uint64(gc.Mpgetfix(r.Val.U.Xval))

		if v >= 32 {
			// reverse during load to do the first 32 bits of rotate
			v -= 32

			gins(x86.AMOVL, &lo1, &dx)
			gins(x86.AMOVL, &hi1, &ax)
		} else {
			gins(x86.AMOVL, &lo1, &ax)
			gins(x86.AMOVL, &hi1, &dx)
		}

		if v == 0 {
		} else // done
		{
			gins(x86.AMOVL, &dx, &cx)
			p1 := gins(x86.ASHLL, ncon(uint32(v)), &dx)
			p1.From.Index = x86.REG_AX // double-width shift
			p1.From.Scale = 0
			p1 = gins(x86.ASHLL, ncon(uint32(v)), &ax)
			p1.From.Index = x86.REG_CX // double-width shift
			p1.From.Scale = 0
		}

	case gc.OLSH:
		if r.Op == gc.OLITERAL {
			v := uint64(gc.Mpgetfix(r.Val.U.Xval))
			if v >= 64 {
				if gc.Is64(r.Type) {
					splitclean()
				}
				splitclean()
				split64(res, &lo2, &hi2)
				gins(x86.AMOVL, ncon(0), &lo2)
				gins(x86.AMOVL, ncon(0), &hi2)
				splitclean()
				return
			}

			if v >= 32 {
				if gc.Is64(r.Type) {
					splitclean()
				}
				split64(res, &lo2, &hi2)
				gmove(&lo1, &hi2)
				if v > 32 {
					gins(x86.ASHLL, ncon(uint32(v-32)), &hi2)
				}

				gins(x86.AMOVL, ncon(0), &lo2)
				splitclean()
				splitclean()
				return
			}

			// general shift
			gins(x86.AMOVL, &lo1, &ax)

			gins(x86.AMOVL, &hi1, &dx)
			p1 := gins(x86.ASHLL, ncon(uint32(v)), &dx)
			p1.From.Index = x86.REG_AX // double-width shift
			p1.From.Scale = 0
			gins(x86.ASHLL, ncon(uint32(v)), &ax)
			break
		}

		// load value into DX:AX.
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)

		// load shift value into register.
		// if high bits are set, zero value.
		var p1 *obj.Prog

		if gc.Is64(r.Type) {
			gins(x86.ACMPL, &hi2, ncon(0))
			p1 = gc.Gbranch(x86.AJNE, nil, +1)
			gins(x86.AMOVL, &lo2, &cx)
		} else {
			cx.Type = gc.Types[gc.TUINT32]
			gmove(r, &cx)
		}

		// if shift count is >=64, zero value
		gins(x86.ACMPL, &cx, ncon(64))

		p2 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		if p1 != nil {
			gc.Patch(p1, gc.Pc)
		}
		gins(x86.AXORL, &dx, &dx)
		gins(x86.AXORL, &ax, &ax)
		gc.Patch(p2, gc.Pc)

		// if shift count is >= 32, zero low.
		gins(x86.ACMPL, &cx, ncon(32))

		p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		gins(x86.AMOVL, &ax, &dx)
		gins(x86.ASHLL, &cx, &dx) // SHLL only uses bottom 5 bits of count
		gins(x86.AXORL, &ax, &ax)
		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)

		// general shift
		p1 = gins(x86.ASHLL, &cx, &dx)

		p1.From.Index = x86.REG_AX // double-width shift
		p1.From.Scale = 0
		gins(x86.ASHLL, &cx, &ax)
		gc.Patch(p2, gc.Pc)

	case gc.ORSH:
		if r.Op == gc.OLITERAL {
			v := uint64(gc.Mpgetfix(r.Val.U.Xval))
			if v >= 64 {
				if gc.Is64(r.Type) {
					splitclean()
				}
				splitclean()
				split64(res, &lo2, &hi2)
				if hi1.Type.Etype == gc.TINT32 {
					gmove(&hi1, &lo2)
					gins(x86.ASARL, ncon(31), &lo2)
					gmove(&hi1, &hi2)
					gins(x86.ASARL, ncon(31), &hi2)
				} else {
					gins(x86.AMOVL, ncon(0), &lo2)
					gins(x86.AMOVL, ncon(0), &hi2)
				}

				splitclean()
				return
			}

			if v >= 32 {
				if gc.Is64(r.Type) {
					splitclean()
				}
				split64(res, &lo2, &hi2)
				gmove(&hi1, &lo2)
				if v > 32 {
					gins(optoas(gc.ORSH, hi1.Type), ncon(uint32(v-32)), &lo2)
				}
				if hi1.Type.Etype == gc.TINT32 {
					gmove(&hi1, &hi2)
					gins(x86.ASARL, ncon(31), &hi2)
				} else {
					gins(x86.AMOVL, ncon(0), &hi2)
				}
				splitclean()
				splitclean()
				return
			}

			// general shift
			gins(x86.AMOVL, &lo1, &ax)

			gins(x86.AMOVL, &hi1, &dx)
			p1 := gins(x86.ASHRL, ncon(uint32(v)), &ax)
			p1.From.Index = x86.REG_DX // double-width shift
			p1.From.Scale = 0
			gins(optoas(gc.ORSH, hi1.Type), ncon(uint32(v)), &dx)
			break
		}

		// load value into DX:AX.
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)

		// load shift value into register.
		// if high bits are set, zero value.
		var p1 *obj.Prog

		if gc.Is64(r.Type) {
			gins(x86.ACMPL, &hi2, ncon(0))
			p1 = gc.Gbranch(x86.AJNE, nil, +1)
			gins(x86.AMOVL, &lo2, &cx)
		} else {
			cx.Type = gc.Types[gc.TUINT32]
			gmove(r, &cx)
		}

		// if shift count is >=64, zero or sign-extend value
		gins(x86.ACMPL, &cx, ncon(64))

		p2 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		if p1 != nil {
			gc.Patch(p1, gc.Pc)
		}
		if hi1.Type.Etype == gc.TINT32 {
			gins(x86.ASARL, ncon(31), &dx)
			gins(x86.AMOVL, &dx, &ax)
		} else {
			gins(x86.AXORL, &dx, &dx)
			gins(x86.AXORL, &ax, &ax)
		}

		gc.Patch(p2, gc.Pc)

		// if shift count is >= 32, sign-extend hi.
		gins(x86.ACMPL, &cx, ncon(32))

		p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		gins(x86.AMOVL, &dx, &ax)
		if hi1.Type.Etype == gc.TINT32 {
			gins(x86.ASARL, &cx, &ax) // SARL only uses bottom 5 bits of count
			gins(x86.ASARL, ncon(31), &dx)
		} else {
			gins(x86.ASHRL, &cx, &ax)
			gins(x86.AXORL, &dx, &dx)
		}

		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)

		// general shift
		p1 = gins(x86.ASHRL, &cx, &ax)

		p1.From.Index = x86.REG_DX // double-width shift
		p1.From.Scale = 0
		gins(optoas(gc.ORSH, hi1.Type), &cx, &dx)
		gc.Patch(p2, gc.Pc)

		// make constant the right side (it usually is anyway).
	case gc.OXOR,
		gc.OAND,
		gc.OOR:
		if lo1.Op == gc.OLITERAL {
			nswap(&lo1, &lo2)
			nswap(&hi1, &hi2)
		}

		if lo2.Op == gc.OLITERAL {
			// special cases for constants.
			lv := uint32(gc.Mpgetfix(lo2.Val.U.Xval))

			hv := uint32(gc.Mpgetfix(hi2.Val.U.Xval))
			splitclean() // right side
			split64(res, &lo2, &hi2)
			switch n.Op {
			case gc.OXOR:
				gmove(&lo1, &lo2)
				gmove(&hi1, &hi2)
				switch lv {
				case 0:
					break

				case 0xffffffff:
					gins(x86.ANOTL, nil, &lo2)

				default:
					gins(x86.AXORL, ncon(lv), &lo2)
				}

				switch hv {
				case 0:
					break

				case 0xffffffff:
					gins(x86.ANOTL, nil, &hi2)

				default:
					gins(x86.AXORL, ncon(hv), &hi2)
				}

			case gc.OAND:
				switch lv {
				case 0:
					gins(x86.AMOVL, ncon(0), &lo2)

				default:
					gmove(&lo1, &lo2)
					if lv != 0xffffffff {
						gins(x86.AANDL, ncon(lv), &lo2)
					}
				}

				switch hv {
				case 0:
					gins(x86.AMOVL, ncon(0), &hi2)

				default:
					gmove(&hi1, &hi2)
					if hv != 0xffffffff {
						gins(x86.AANDL, ncon(hv), &hi2)
					}
				}

			case gc.OOR:
				switch lv {
				case 0:
					gmove(&lo1, &lo2)

				case 0xffffffff:
					gins(x86.AMOVL, ncon(0xffffffff), &lo2)

				default:
					gmove(&lo1, &lo2)
					gins(x86.AORL, ncon(lv), &lo2)
				}

				switch hv {
				case 0:
					gmove(&hi1, &hi2)

				case 0xffffffff:
					gins(x86.AMOVL, ncon(0xffffffff), &hi2)

				default:
					gmove(&hi1, &hi2)
					gins(x86.AORL, ncon(hv), &hi2)
				}
			}

			splitclean()
			splitclean()
			return
		}

		gins(x86.AMOVL, &lo1, &ax)
		gins(x86.AMOVL, &hi1, &dx)
		gins(optoas(int(n.Op), lo1.Type), &lo2, &ax)
		gins(optoas(int(n.Op), lo1.Type), &hi2, &dx)
	}

	if gc.Is64(r.Type) {
		splitclean()
	}
	splitclean()

	split64(res, &lo1, &hi1)
	gins(x86.AMOVL, &ax, &lo1)
	gins(x86.AMOVL, &dx, &hi1)
	splitclean()
}
Example #20
0
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Type.Width > 4 {
		gc.Fatal("cgen_shift %v", nl.Type)
	}

	w := int(nl.Type.Width * 8)

	if op == gc.OLROT {
		v := nr.Int()
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		if w == 32 {
			gc.Cgen(nl, &n1)
			gshift(arm.AMOVW, &n1, arm.SHIFT_RR, int32(w)-int32(v), &n1)
		} else {
			var n2 gc.Node
			gc.Regalloc(&n2, nl.Type, nil)
			gc.Cgen(nl, &n2)
			gshift(arm.AMOVW, &n2, arm.SHIFT_LL, int32(v), &n1)
			gshift(arm.AORR, &n2, arm.SHIFT_LR, int32(w)-int32(v), &n1)
			gc.Regfree(&n2)

			// Ensure sign/zero-extended result.
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}

		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int())
		if sc == 0 {
		} else // nothing to do
		if sc >= uint64(nl.Type.Width*8) {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(w), &n1)
			} else {
				gins(arm.AEOR, &n1, &n1)
			}
		} else {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(sc), &n1)
			} else if op == gc.ORSH {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LR, int32(sc), &n1) // OLSH
			} else {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LL, int32(sc), &n1)
			}
		}

		if w < 32 && op == gc.OLSH {
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	tr := nr.Type
	var t gc.Node
	var n1 gc.Node
	var n2 gc.Node
	var n3 gc.Node
	if tr.Width > 4 {
		var nt gc.Node
		gc.Tempname(&nt, nr.Type)
		if nl.Ullman >= nr.Ullman {
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
			gc.Cgen(nr, &nt)
			n1 = nt
		} else {
			gc.Cgen(nr, &nt)
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
		}

		var hi gc.Node
		var lo gc.Node
		split64(&nt, &lo, &hi)
		gc.Regalloc(&n1, gc.Types[gc.TUINT32], nil)
		gc.Regalloc(&n3, gc.Types[gc.TUINT32], nil)
		gmove(&lo, &n1)
		gmove(&hi, &n3)
		splitclean()
		gins(arm.ATST, &n3, nil)
		gc.Nodconst(&t, gc.Types[gc.TUINT32], int64(w))
		p1 := gins(arm.AMOVW, &t, &n1)
		p1.Scond = arm.C_SCOND_NE
		tr = gc.Types[gc.TUINT32]
		gc.Regfree(&n3)
	} else {
		if nl.Ullman >= nr.Ullman {
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
			gc.Regalloc(&n1, nr.Type, nil)
			gc.Cgen(nr, &n1)
		} else {
			gc.Regalloc(&n1, nr.Type, nil)
			gc.Cgen(nr, &n1)
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
		}
	}

	// test for shift being 0
	gins(arm.ATST, &n1, nil)

	p3 := gc.Gbranch(arm.ABEQ, nil, -1)

	// test and fix up large shifts
	// TODO: if(!bounded), don't emit some of this.
	gc.Regalloc(&n3, tr, nil)

	gc.Nodconst(&t, gc.Types[gc.TUINT32], int64(w))
	gmove(&t, &n3)
	gins(arm.ACMP, &n1, &n3)
	if op == gc.ORSH {
		var p1 *obj.Prog
		var p2 *obj.Prog
		if gc.Issigned[nl.Type.Etype] {
			p1 = gshift(arm.AMOVW, &n2, arm.SHIFT_AR, int32(w)-1, &n2)
			p2 = gregshift(arm.AMOVW, &n2, arm.SHIFT_AR, &n1, &n2)
		} else {
			p1 = gins(arm.AEOR, &n2, &n2)
			p2 = gregshift(arm.AMOVW, &n2, arm.SHIFT_LR, &n1, &n2)
		}

		p1.Scond = arm.C_SCOND_HS
		p2.Scond = arm.C_SCOND_LO
	} else {
		p1 := gins(arm.AEOR, &n2, &n2)
		p2 := gregshift(arm.AMOVW, &n2, arm.SHIFT_LL, &n1, &n2)
		p1.Scond = arm.C_SCOND_HS
		p2.Scond = arm.C_SCOND_LO
	}

	gc.Regfree(&n3)

	gc.Patch(p3, gc.Pc)

	// Left-shift of smaller word must be sign/zero-extended.
	if w < 32 && op == gc.OLSH {
		gins(optoas(gc.OAS, nl.Type), &n2, &n2)
	}
	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #21
0
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		gc.Cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		gc.Cgen(nr, &n5)
		nr = &n5
	}

	rcx := int(reg[x86.REG_CX])
	var n1 gc.Node
	gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	var n3 gc.Node
	gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)

	var oldcx gc.Node
	if rcx > 0 && !gc.Samereg(&cx, res) {
		gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
		gmove(&cx, &oldcx)
	}

	cx.Type = tcount

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
		gc.Cgen(nl, &n2)
	}

	gc.Regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	if oldcx.Op != 0 {
		cx.Type = gc.Types[gc.TUINT64]
		gmove(&oldcx, &cx)
		gc.Regfree(&oldcx)
	}

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #22
0
/*
 * n is call to interface method.
 * generate res = n.
 */
func cgen_callinter(n *gc.Node, res *gc.Node, proc int) {
	i := n.Left
	if i.Op != gc.ODOTINTER {
		gc.Fatal("cgen_callinter: not ODOTINTER %v", gc.Oconv(int(i.Op), 0))
	}

	f := i.Right // field
	if f.Op != gc.ONAME {
		gc.Fatal("cgen_callinter: not ONAME %v", gc.Oconv(int(f.Op), 0))
	}

	i = i.Left // interface

	// Release res register during genlist and cgen,
	// which might have their own function calls.
	r := -1

	if res != nil && (res.Op == gc.OREGISTER || res.Op == gc.OINDREG) {
		r = int(res.Val.U.Reg)
		reg[r]--
	}

	if i.Addable == 0 {
		var tmpi gc.Node
		gc.Tempname(&tmpi, i.Type)
		cgen(i, &tmpi)
		i = &tmpi
	}

	gc.Genlist(n.List) // args
	if r >= 0 {
		reg[r]++
	}

	var nodr gc.Node
	regalloc(&nodr, gc.Types[gc.Tptr], res)
	var nodo gc.Node
	regalloc(&nodo, gc.Types[gc.Tptr], &nodr)
	nodo.Op = gc.OINDREG

	agen(i, &nodr) // REG = &inter

	var nodsp gc.Node
	gc.Nodindreg(&nodsp, gc.Types[gc.Tptr], arm.REGSP)

	nodsp.Xoffset = int64(gc.Widthptr)
	if proc != 0 {
		nodsp.Xoffset += 2 * int64(gc.Widthptr) // leave room for size & fn
	}
	nodo.Xoffset += int64(gc.Widthptr)
	cgen(&nodo, &nodsp) // {4 or 12}(SP) = 4(REG) -- i.data

	nodo.Xoffset -= int64(gc.Widthptr)

	cgen(&nodo, &nodr)      // REG = 0(REG) -- i.tab
	gc.Cgen_checknil(&nodr) // in case offset is huge

	nodo.Xoffset = n.Left.Xoffset + 3*int64(gc.Widthptr) + 8

	if proc == 0 {
		// plain call: use direct c function pointer - more efficient
		cgen(&nodo, &nodr) // REG = 20+offset(REG) -- i.tab->fun[f]
		nodr.Op = gc.OINDREG
		proc = 3
	} else {
		// go/defer. generate go func value.
		p := gins(arm.AMOVW, &nodo, &nodr)

		p.From.Type = obj.TYPE_ADDR // REG = &(20+offset(REG)) -- i.tab->fun[f]
	}

	nodr.Type = n.Left.Type
	ginscall(&nodr, proc)

	regfree(&nodr)
	regfree(&nodo)
}
Example #23
0
File: ggen.go Project: tidatida/go
/*
 * generate division.
 * caller must set:
 *	ax = allocated AX register
 *	dx = allocated DX register
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node, ax *gc.Node, dx *gc.Node) {
	// Have to be careful about handling
	// most negative int divided by -1 correctly.
	// The hardware will trap.
	// Also the byte divide instruction needs AH,
	// which we otherwise don't have to deal with.
	// Easiest way to avoid for int8, int16: use int32.
	// For int32 and int64, use explicit test.
	// Could use int64 hw for int32.
	t := nl.Type

	t0 := t
	check := 0
	if gc.Issigned[t.Etype] {
		check = 1
		if gc.Isconst(nl, gc.CTINT) && gc.Mpgetfix(nl.Val.U.Xval) != -1<<uint64(t.Width*8-1) {
			check = 0
		} else if gc.Isconst(nr, gc.CTINT) && gc.Mpgetfix(nr.Val.U.Xval) != -1 {
			check = 0
		}
	}

	if t.Width < 4 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT32]
		} else {
			t = gc.Types[gc.TUINT32]
		}
		check = 0
	}

	var t1 gc.Node
	gc.Tempname(&t1, t)
	var t2 gc.Node
	gc.Tempname(&t2, t)
	if t0 != t {
		var t3 gc.Node
		gc.Tempname(&t3, t0)
		var t4 gc.Node
		gc.Tempname(&t4, t0)
		gc.Cgen(nl, &t3)
		gc.Cgen(nr, &t4)

		// Convert.
		gmove(&t3, &t1)

		gmove(&t4, &t2)
	} else {
		gc.Cgen(nl, &t1)
		gc.Cgen(nr, &t2)
	}

	var n1 gc.Node
	if !gc.Samereg(ax, res) && !gc.Samereg(dx, res) {
		gc.Regalloc(&n1, t, res)
	} else {
		gc.Regalloc(&n1, t, nil)
	}
	gmove(&t2, &n1)
	gmove(&t1, ax)
	var p2 *obj.Prog
	var n4 gc.Node
	if gc.Nacl {
		// Native Client does not relay the divide-by-zero trap
		// to the executing program, so we must insert a check
		// for ourselves.
		gc.Nodconst(&n4, t, 0)

		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if panicdiv == nil {
			panicdiv = gc.Sysfunc("panicdivide")
		}
		gc.Ginscall(panicdiv, -1)
		gc.Patch(p1, gc.Pc)
	}

	if check != 0 {
		gc.Nodconst(&n4, t, -1)
		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if op == gc.ODIV {
			// a / (-1) is -a.
			gins(optoas(gc.OMINUS, t), nil, ax)

			gmove(ax, res)
		} else {
			// a % (-1) is 0.
			gc.Nodconst(&n4, t, 0)

			gmove(&n4, res)
		}

		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
	}

	if !gc.Issigned[t.Etype] {
		var nz gc.Node
		gc.Nodconst(&nz, t, 0)
		gmove(&nz, dx)
	} else {
		gins(optoas(gc.OEXTEND, t), nil, nil)
	}
	gins(optoas(op, t), &n1, nil)
	gc.Regfree(&n1)

	if op == gc.ODIV {
		gmove(ax, res)
	} else {
		gmove(dx, res)
	}
	if check != 0 {
		gc.Patch(p2, gc.Pc)
	}
}
Example #24
0
/*
 * allocate a register (reusing res if possible) and generate
 * a = &n
 * The caller must call regfree(a).
 * The generated code checks that the result is not nil.
 */
func agenr(n *gc.Node, a *gc.Node, res *gc.Node) {
	if gc.Debug['g'] != 0 {
		gc.Dump("agenr-n", n)
	}

	nl := n.Left
	nr := n.Right

	switch n.Op {
	case gc.ODOT,
		gc.ODOTPTR,
		gc.OCALLFUNC,
		gc.OCALLMETH,
		gc.OCALLINTER:
		var n1 gc.Node
		igen(n, &n1, res)
		regalloc(a, gc.Types[gc.Tptr], &n1)
		agen(&n1, a)
		regfree(&n1)

	case gc.OIND:
		cgenr(n.Left, a, res)
		gc.Cgen_checknil(a)

	case gc.OINDEX:
		var p2 *obj.Prog // to be patched to panicindex.
		w := uint32(n.Type.Width)

		//bounded = debug['B'] || n->bounded;
		var n3 gc.Node
		var n1 gc.Node
		if nr.Addable != 0 {
			var tmp gc.Node
			if !gc.Isconst(nr, gc.CTINT) {
				gc.Tempname(&tmp, gc.Types[gc.TINT64])
			}
			if !gc.Isconst(nl, gc.CTSTR) {
				agenr(nl, &n3, res)
			}
			if !gc.Isconst(nr, gc.CTINT) {
				cgen(nr, &tmp)
				regalloc(&n1, tmp.Type, nil)
				gmove(&tmp, &n1)
			}
		} else if nl.Addable != 0 {
			if !gc.Isconst(nr, gc.CTINT) {
				var tmp gc.Node
				gc.Tempname(&tmp, gc.Types[gc.TINT64])
				cgen(nr, &tmp)
				regalloc(&n1, tmp.Type, nil)
				gmove(&tmp, &n1)
			}

			if !gc.Isconst(nl, gc.CTSTR) {
				agenr(nl, &n3, res)
			}
		} else {
			var tmp gc.Node
			gc.Tempname(&tmp, gc.Types[gc.TINT64])
			cgen(nr, &tmp)
			nr = &tmp
			if !gc.Isconst(nl, gc.CTSTR) {
				agenr(nl, &n3, res)
			}
			regalloc(&n1, tmp.Type, nil)
			gins(optoas(gc.OAS, tmp.Type), &tmp, &n1)
		}

		// &a is in &n3 (allocated in res)
		// i is in &n1 (if not constant)
		// w is width

		// constant index
		if gc.Isconst(nr, gc.CTINT) {
			if gc.Isconst(nl, gc.CTSTR) {
				gc.Fatal("constant string constant index")
			}
			v := uint64(gc.Mpgetfix(nr.Val.U.Xval))
			if gc.Isslice(nl.Type) || nl.Type.Etype == gc.TSTRING {
				if gc.Debug['B'] == 0 && !n.Bounded {
					n1 = n3
					n1.Op = gc.OINDREG
					n1.Type = gc.Types[gc.Tptr]
					n1.Xoffset = int64(gc.Array_nel)
					var n4 gc.Node
					regalloc(&n4, n1.Type, nil)
					gmove(&n1, &n4)
					ginscon2(optoas(gc.OCMP, gc.Types[gc.TUINT64]), &n4, int64(v))
					regfree(&n4)
					p1 := gc.Gbranch(optoas(gc.OGT, gc.Types[gc.TUINT64]), nil, +1)
					ginscall(gc.Panicindex, 0)
					gc.Patch(p1, gc.Pc)
				}

				n1 = n3
				n1.Op = gc.OINDREG
				n1.Type = gc.Types[gc.Tptr]
				n1.Xoffset = int64(gc.Array_array)
				gmove(&n1, &n3)
			}

			if v*uint64(w) != 0 {
				ginscon(optoas(gc.OADD, gc.Types[gc.Tptr]), int64(v*uint64(w)), &n3)
			}

			*a = n3
			break
		}

		var n2 gc.Node
		regalloc(&n2, gc.Types[gc.TINT64], &n1) // i
		gmove(&n1, &n2)
		regfree(&n1)

		var n4 gc.Node
		if gc.Debug['B'] == 0 && !n.Bounded {
			// check bounds
			if gc.Isconst(nl, gc.CTSTR) {
				gc.Nodconst(&n4, gc.Types[gc.TUINT64], int64(len(nl.Val.U.Sval)))
			} else if gc.Isslice(nl.Type) || nl.Type.Etype == gc.TSTRING {
				n1 = n3
				n1.Op = gc.OINDREG
				n1.Type = gc.Types[gc.Tptr]
				n1.Xoffset = int64(gc.Array_nel)
				regalloc(&n4, gc.Types[gc.TUINT64], nil)
				gmove(&n1, &n4)
			} else {
				if nl.Type.Bound < (1<<15)-1 {
					gc.Nodconst(&n4, gc.Types[gc.TUINT64], nl.Type.Bound)
				} else {
					regalloc(&n4, gc.Types[gc.TUINT64], nil)
					p1 := gins(ppc64.AMOVD, nil, &n4)
					p1.From.Type = obj.TYPE_CONST
					p1.From.Offset = nl.Type.Bound
				}
			}

			gins(optoas(gc.OCMP, gc.Types[gc.TUINT64]), &n2, &n4)
			if n4.Op == gc.OREGISTER {
				regfree(&n4)
			}
			p1 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT64]), nil, +1)
			if p2 != nil {
				gc.Patch(p2, gc.Pc)
			}
			ginscall(gc.Panicindex, 0)
			gc.Patch(p1, gc.Pc)
		}

		if gc.Isconst(nl, gc.CTSTR) {
			regalloc(&n3, gc.Types[gc.Tptr], res)
			p1 := gins(ppc64.AMOVD, nil, &n3)
			gc.Datastring(nl.Val.U.Sval, &p1.From)
			p1.From.Type = obj.TYPE_ADDR
		} else if gc.Isslice(nl.Type) || nl.Type.Etype == gc.TSTRING {
			n1 = n3
			n1.Op = gc.OINDREG
			n1.Type = gc.Types[gc.Tptr]
			n1.Xoffset = int64(gc.Array_array)
			gmove(&n1, &n3)
		}

		if w == 0 {
		} else // nothing to do
		if w == 1 {
			/* w already scaled */
			gins(optoas(gc.OADD, gc.Types[gc.Tptr]), &n2, &n3)
			/* else if(w == 2 || w == 4 || w == 8) {
				// TODO(minux): scale using shift
			} */
		} else {
			regalloc(&n4, gc.Types[gc.TUINT64], nil)
			gc.Nodconst(&n1, gc.Types[gc.TUINT64], int64(w))
			gmove(&n1, &n4)
			gins(optoas(gc.OMUL, gc.Types[gc.TUINT64]), &n4, &n2)
			gins(optoas(gc.OADD, gc.Types[gc.Tptr]), &n2, &n3)
			regfree(&n4)
		}

		*a = n3
		regfree(&n2)

	default:
		regalloc(a, gc.Types[gc.Tptr], res)
		agen(n, a)
	}
}
Example #25
0
File: ggen.go Project: tidatida/go
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Type.Width > 4 {
		gc.Fatal("cgen_shift %v", gc.Tconv(nl.Type, 0))
	}

	w := int(nl.Type.Width * 8)

	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n2 gc.Node
		gc.Tempname(&n2, nl.Type)
		gc.Cgen(nl, &n2)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gmove(&n2, &n1)
		sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			gins(a, ncon(uint32(w)-1), &n1)

			gins(a, ncon(uint32(w)-1), &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	var oldcx gc.Node
	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
	if reg[x86.REG_CX] > 1 && !gc.Samereg(&cx, res) {
		gc.Tempname(&oldcx, gc.Types[gc.TUINT32])
		gmove(&cx, &oldcx)
	}

	var n1 gc.Node
	var nt gc.Node
	if nr.Type.Width > 4 {
		gc.Tempname(&nt, nr.Type)
		n1 = nt
	} else {
		gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
		gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	}

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
	} else {
		gc.Cgen(nr, &n1)
		gc.Cgen(nl, &n2)
	}

	// test and fix up large shifts
	if bounded {
		if nr.Type.Width > 4 {
			// delayed reg alloc
			gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

			gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
			var lo gc.Node
			var hi gc.Node
			split64(&nt, &lo, &hi)
			gmove(&lo, &n1)
			splitclean()
		}
	} else {
		var p1 *obj.Prog
		if nr.Type.Width > 4 {
			// delayed reg alloc
			gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

			gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
			var lo gc.Node
			var hi gc.Node
			split64(&nt, &lo, &hi)
			gmove(&lo, &n1)
			gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &hi, ncon(0))
			p2 := gc.Gbranch(optoas(gc.ONE, gc.Types[gc.TUINT32]), nil, +1)
			gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &n1, ncon(uint32(w)))
			p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
			splitclean()
			gc.Patch(p2, gc.Pc)
		} else {
			gins(optoas(gc.OCMP, nr.Type), &n1, ncon(uint32(w)))
			p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		}

		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gins(a, ncon(uint32(w)-1), &n2)
		} else {
			gmove(ncon(0), &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	if oldcx.Op != 0 {
		gmove(&oldcx, &cx)
	}

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #26
0
/*
 * generate:
 *	res = &n;
 * The generated code checks that the result is not nil.
 */
func agen(n *gc.Node, res *gc.Node) {
	if gc.Debug['g'] != 0 {
		gc.Dump("\nagen-res", res)
		gc.Dump("agen-r", n)
	}

	if n == nil || n.Type == nil {
		return
	}

	for n.Op == gc.OCONVNOP {
		n = n.Left
	}

	if gc.Isconst(n, gc.CTNIL) && n.Type.Width > int64(gc.Widthptr) {
		// Use of a nil interface or nil slice.
		// Create a temporary we can take the address of and read.
		// The generated code is just going to panic, so it need not
		// be terribly efficient. See issue 3670.
		var n1 gc.Node
		gc.Tempname(&n1, n.Type)

		gc.Gvardef(&n1)
		clearfat(&n1)
		var n2 gc.Node
		regalloc(&n2, gc.Types[gc.Tptr], res)
		var n3 gc.Node
		n3.Op = gc.OADDR
		n3.Left = &n1
		gins(ppc64.AMOVD, &n3, &n2)
		gmove(&n2, res)
		regfree(&n2)
		return
	}

	if n.Addable != 0 {
		var n1 gc.Node
		n1.Op = gc.OADDR
		n1.Left = n
		var n2 gc.Node
		regalloc(&n2, gc.Types[gc.Tptr], res)
		gins(ppc64.AMOVD, &n1, &n2)
		gmove(&n2, res)
		regfree(&n2)
		return
	}

	nl := n.Left

	switch n.Op {
	default:
		gc.Fatal("agen: unknown op %v", gc.Nconv(n, obj.FmtShort|obj.FmtSign))

		// TODO(minux): 5g has this: Release res so that it is available for cgen_call.
	// Pick it up again after the call for OCALLMETH and OCALLFUNC.
	case gc.OCALLMETH:
		gc.Cgen_callmeth(n, 0)

		cgen_aret(n, res)

	case gc.OCALLINTER:
		cgen_callinter(n, res, 0)
		cgen_aret(n, res)

	case gc.OCALLFUNC:
		cgen_call(n, 0)
		cgen_aret(n, res)

	case gc.OSLICE,
		gc.OSLICEARR,
		gc.OSLICESTR,
		gc.OSLICE3,
		gc.OSLICE3ARR:
		var n1 gc.Node
		gc.Tempname(&n1, n.Type)
		gc.Cgen_slice(n, &n1)
		agen(&n1, res)

	case gc.OEFACE:
		var n1 gc.Node
		gc.Tempname(&n1, n.Type)
		gc.Cgen_eface(n, &n1)
		agen(&n1, res)

	case gc.OINDEX:
		var n1 gc.Node
		agenr(n, &n1, res)
		gmove(&n1, res)
		regfree(&n1)

		// should only get here with names in this func.
	case gc.ONAME:
		if n.Funcdepth > 0 && n.Funcdepth != gc.Funcdepth {
			gc.Dump("bad agen", n)
			gc.Fatal("agen: bad ONAME funcdepth %d != %d", n.Funcdepth, gc.Funcdepth)
		}

		// should only get here for heap vars or paramref
		if n.Class&gc.PHEAP == 0 && n.Class != gc.PPARAMREF {
			gc.Dump("bad agen", n)
			gc.Fatal("agen: bad ONAME class %#x", n.Class)
		}

		cgen(n.Heapaddr, res)
		if n.Xoffset != 0 {
			ginsadd(optoas(gc.OADD, gc.Types[gc.Tptr]), n.Xoffset, res)
		}

	case gc.OIND:
		cgen(nl, res)
		gc.Cgen_checknil(res)

	case gc.ODOT:
		agen(nl, res)
		if n.Xoffset != 0 {
			ginsadd(optoas(gc.OADD, gc.Types[gc.Tptr]), n.Xoffset, res)
		}

	case gc.ODOTPTR:
		cgen(nl, res)
		gc.Cgen_checknil(res)
		if n.Xoffset != 0 {
			ginsadd(optoas(gc.OADD, gc.Types[gc.Tptr]), n.Xoffset, res)
		}
	}
}
Example #27
0
/*
 * block copy:
 *	memmove(&ns, &n, w);
 */
func sgen(n *gc.Node, ns *gc.Node, w int64) {
	var res *gc.Node = ns

	if gc.Debug['g'] != 0 {
		fmt.Printf("\nsgen w=%d\n", w)
		gc.Dump("r", n)
		gc.Dump("res", ns)
	}

	if n.Ullman >= gc.UINF && ns.Ullman >= gc.UINF {
		gc.Fatal("sgen UINF")
	}

	if w < 0 {
		gc.Fatal("sgen copy %d", w)
	}

	// If copying .args, that's all the results, so record definition sites
	// for them for the liveness analysis.
	if ns.Op == gc.ONAME && ns.Sym.Name == ".args" {
		for l := gc.Curfn.Dcl; l != nil; l = l.Next {
			if l.N.Class == gc.PPARAMOUT {
				gc.Gvardef(l.N)
			}
		}
	}

	// Avoid taking the address for simple enough types.
	//if(componentgen(n, ns))
	//	return;
	if w == 0 {
		// evaluate side effects only.
		var dst gc.Node
		regalloc(&dst, gc.Types[gc.Tptr], nil)

		agen(res, &dst)
		agen(n, &dst)
		regfree(&dst)
		return
	}

	// determine alignment.
	// want to avoid unaligned access, so have to use
	// smaller operations for less aligned types.
	// for example moving [4]byte must use 4 MOVB not 1 MOVW.
	align := int(n.Type.Align)

	var op int
	switch align {
	default:
		gc.Fatal("sgen: invalid alignment %d for %v", align, gc.Tconv(n.Type, 0))

	case 1:
		op = ppc64.AMOVBU

	case 2:
		op = ppc64.AMOVHU

	case 4:
		op = ppc64.AMOVWZU // there is no lwau, only lwaux

	case 8:
		op = ppc64.AMOVDU
	}

	if w%int64(align) != 0 {
		gc.Fatal("sgen: unaligned size %d (align=%d) for %v", w, align, gc.Tconv(n.Type, 0))
	}
	c := int32(w / int64(align))

	// offset on the stack
	osrc := int32(stkof(n))

	odst := int32(stkof(res))
	if osrc != -1000 && odst != -1000 && (osrc == 1000 || odst == 1000) {
		// osrc and odst both on stack, and at least one is in
		// an unknown position.  Could generate code to test
		// for forward/backward copy, but instead just copy
		// to a temporary location first.
		var tmp gc.Node
		gc.Tempname(&tmp, n.Type)

		sgen(n, &tmp, w)
		sgen(&tmp, res, w)
		return
	}

	if osrc%int32(align) != 0 || odst%int32(align) != 0 {
		gc.Fatal("sgen: unaligned offset src %d or dst %d (align %d)", osrc, odst, align)
	}

	// if we are copying forward on the stack and
	// the src and dst overlap, then reverse direction
	dir := align

	if osrc < odst && int64(odst) < int64(osrc)+w {
		dir = -dir
	}

	var dst gc.Node
	var src gc.Node
	if n.Ullman >= res.Ullman {
		agenr(n, &dst, res) // temporarily use dst
		regalloc(&src, gc.Types[gc.Tptr], nil)
		gins(ppc64.AMOVD, &dst, &src)
		if res.Op == gc.ONAME {
			gc.Gvardef(res)
		}
		agen(res, &dst)
	} else {
		if res.Op == gc.ONAME {
			gc.Gvardef(res)
		}
		agenr(res, &dst, res)
		agenr(n, &src, nil)
	}

	var tmp gc.Node
	regalloc(&tmp, gc.Types[gc.Tptr], nil)

	// set up end marker
	var nend gc.Node

	// move src and dest to the end of block if necessary
	if dir < 0 {
		if c >= 4 {
			regalloc(&nend, gc.Types[gc.Tptr], nil)
			gins(ppc64.AMOVD, &src, &nend)
		}

		p := gins(ppc64.AADD, nil, &src)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w

		p = gins(ppc64.AADD, nil, &dst)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w
	} else {
		p := gins(ppc64.AADD, nil, &src)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = int64(-dir)

		p = gins(ppc64.AADD, nil, &dst)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = int64(-dir)

		if c >= 4 {
			regalloc(&nend, gc.Types[gc.Tptr], nil)
			p := gins(ppc64.AMOVD, &src, &nend)
			p.From.Type = obj.TYPE_ADDR
			p.From.Offset = w
		}
	}

	// move
	// TODO: enable duffcopy for larger copies.
	if c >= 4 {
		p := gins(op, &src, &tmp)
		p.From.Type = obj.TYPE_MEM
		p.From.Offset = int64(dir)
		ploop := p

		p = gins(op, &tmp, &dst)
		p.To.Type = obj.TYPE_MEM
		p.To.Offset = int64(dir)

		p = gins(ppc64.ACMP, &src, &nend)

		gc.Patch(gc.Gbranch(ppc64.ABNE, nil, 0), ploop)
		regfree(&nend)
	} else {
		// TODO(austin): Instead of generating ADD $-8,R8; ADD
		// $-8,R7; n*(MOVDU 8(R8),R9; MOVDU R9,8(R7);) just
		// generate the offsets directly and eliminate the
		// ADDs.  That will produce shorter, more
		// pipeline-able code.
		var p *obj.Prog
		for {
			tmp14 := c
			c--
			if tmp14 <= 0 {
				break
			}

			p = gins(op, &src, &tmp)
			p.From.Type = obj.TYPE_MEM
			p.From.Offset = int64(dir)

			p = gins(op, &tmp, &dst)
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = int64(dir)
		}
	}

	regfree(&dst)
	regfree(&src)
	regfree(&tmp)
}
Example #28
0
/*
 * n is call to interface method.
 * generate res = n.
 */
func cgen_callinter(n *gc.Node, res *gc.Node, proc int) {
	i := n.Left
	if i.Op != gc.ODOTINTER {
		gc.Fatal("cgen_callinter: not ODOTINTER %v", gc.Oconv(int(i.Op), 0))
	}

	f := i.Right // field
	if f.Op != gc.ONAME {
		gc.Fatal("cgen_callinter: not ONAME %v", gc.Oconv(int(f.Op), 0))
	}

	i = i.Left // interface

	if i.Addable == 0 {
		var tmpi gc.Node
		gc.Tempname(&tmpi, i.Type)
		cgen(i, &tmpi)
		i = &tmpi
	}

	gc.Genlist(n.List) // assign the args

	// i is now addable, prepare an indirected
	// register to hold its address.
	var nodi gc.Node
	igen(i, &nodi, res) // REG = &inter

	var nodsp gc.Node
	gc.Nodindreg(&nodsp, gc.Types[gc.Tptr], x86.REG_SP)

	nodsp.Xoffset = 0
	if proc != 0 {
		nodsp.Xoffset += 2 * int64(gc.Widthptr) // leave room for size & fn
	}
	nodi.Type = gc.Types[gc.Tptr]
	nodi.Xoffset += int64(gc.Widthptr)
	cgen(&nodi, &nodsp) // {0 or 8}(SP) = 4(REG) -- i.data

	var nodo gc.Node
	regalloc(&nodo, gc.Types[gc.Tptr], res)

	nodi.Type = gc.Types[gc.Tptr]
	nodi.Xoffset -= int64(gc.Widthptr)
	cgen(&nodi, &nodo) // REG = 0(REG) -- i.tab
	regfree(&nodi)

	var nodr gc.Node
	regalloc(&nodr, gc.Types[gc.Tptr], &nodo)
	if n.Left.Xoffset == gc.BADWIDTH {
		gc.Fatal("cgen_callinter: badwidth")
	}
	gc.Cgen_checknil(&nodo)
	nodo.Op = gc.OINDREG
	nodo.Xoffset = n.Left.Xoffset + 3*int64(gc.Widthptr) + 8

	if proc == 0 {
		// plain call: use direct c function pointer - more efficient
		cgen(&nodo, &nodr) // REG = 20+offset(REG) -- i.tab->fun[f]
		proc = 3
	} else {
		// go/defer. generate go func value.
		gins(x86.ALEAL, &nodo, &nodr) // REG = &(20+offset(REG)) -- i.tab->fun[f]
	}

	nodr.Type = n.Left.Type
	ginscall(&nodr, proc)

	regfree(&nodr)
	regfree(&nodo)
}
Example #29
0
File: ggen.go Project: tidatida/go
func bgen_float(n *gc.Node, true_ int, likely int, to *obj.Prog) {
	nl := n.Left
	nr := n.Right
	a := int(n.Op)
	if true_ == 0 {
		// brcom is not valid on floats when NaN is involved.
		p1 := gc.Gbranch(obj.AJMP, nil, 0)

		p2 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)

		// No need to avoid re-genning ninit.
		bgen_float(n, 1, -likely, p2)

		gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
		gc.Patch(p2, gc.Pc)
		return
	}

	var tmp gc.Node
	var et int
	var n2 gc.Node
	var ax gc.Node
	if !gc.Thearch.Use387 {
		if nl.Addable == 0 {
			var n1 gc.Node
			gc.Tempname(&n1, nl.Type)
			gc.Cgen(nl, &n1)
			nl = &n1
		}

		if nr.Addable == 0 {
			var tmp gc.Node
			gc.Tempname(&tmp, nr.Type)
			gc.Cgen(nr, &tmp)
			nr = &tmp
		}

		var n2 gc.Node
		gc.Regalloc(&n2, nr.Type, nil)
		gmove(nr, &n2)
		nr = &n2

		if nl.Op != gc.OREGISTER {
			var n3 gc.Node
			gc.Regalloc(&n3, nl.Type, nil)
			gmove(nl, &n3)
			nl = &n3
		}

		if a == gc.OGE || a == gc.OGT {
			// only < and <= work right with NaN; reverse if needed
			r := nr

			nr = nl
			nl = r
			a = gc.Brrev(a)
		}

		gins(foptoas(gc.OCMP, nr.Type, 0), nl, nr)
		if nl.Op == gc.OREGISTER {
			gc.Regfree(nl)
		}
		gc.Regfree(nr)
		goto ret
	} else {
		goto x87
	}

x87:
	a = gc.Brrev(a) // because the args are stacked
	if a == gc.OGE || a == gc.OGT {
		// only < and <= work right with NaN; reverse if needed
		r := nr

		nr = nl
		nl = r
		a = gc.Brrev(a)
	}

	gc.Nodreg(&tmp, nr.Type, x86.REG_F0)
	gc.Nodreg(&n2, nr.Type, x86.REG_F0+1)
	gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)
	et = gc.Simsimtype(nr.Type)
	if et == gc.TFLOAT64 {
		if nl.Ullman > nr.Ullman {
			gc.Cgen(nl, &tmp)
			gc.Cgen(nr, &tmp)
			gins(x86.AFXCHD, &tmp, &n2)
		} else {
			gc.Cgen(nr, &tmp)
			gc.Cgen(nl, &tmp)
		}

		gins(x86.AFUCOMIP, &tmp, &n2)
		gins(x86.AFMOVDP, &tmp, &tmp) // annoying pop but still better than STSW+SAHF
	} else {
		// TODO(rsc): The moves back and forth to memory
		// here are for truncating the value to 32 bits.
		// This handles 32-bit comparison but presumably
		// all the other ops have the same problem.
		// We need to figure out what the right general
		// solution is, besides telling people to use float64.
		var t1 gc.Node
		gc.Tempname(&t1, gc.Types[gc.TFLOAT32])

		var t2 gc.Node
		gc.Tempname(&t2, gc.Types[gc.TFLOAT32])
		gc.Cgen(nr, &t1)
		gc.Cgen(nl, &t2)
		gmove(&t2, &tmp)
		gins(x86.AFCOMFP, &t1, &tmp)
		gins(x86.AFSTSW, nil, &ax)
		gins(x86.ASAHF, nil, nil)
	}

	goto ret

ret:
	if a == gc.OEQ {
		// neither NE nor P
		p1 := gc.Gbranch(x86.AJNE, nil, -likely)

		p2 := gc.Gbranch(x86.AJPS, nil, -likely)
		gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
		gc.Patch(p1, gc.Pc)
		gc.Patch(p2, gc.Pc)
	} else if a == gc.ONE {
		// either NE or P
		gc.Patch(gc.Gbranch(x86.AJNE, nil, likely), to)

		gc.Patch(gc.Gbranch(x86.AJPS, nil, likely), to)
	} else {
		gc.Patch(gc.Gbranch(optoas(a, nr.Type), nil, likely), to)
	}
}
Example #30
0
/*
 * generate:
 *	res = n;
 * simplifies and calls gmove.
 */
func cgen(n *gc.Node, res *gc.Node) {
	//print("cgen %N(%d) -> %N(%d)\n", n, n->addable, res, res->addable);
	if gc.Debug['g'] != 0 {
		gc.Dump("\ncgen-n", n)
		gc.Dump("cgen-res", res)
	}

	if n == nil || n.Type == nil {
		return
	}

	if res == nil || res.Type == nil {
		gc.Fatal("cgen: res nil")
	}

	for n.Op == gc.OCONVNOP {
		n = n.Left
	}

	switch n.Op {
	case gc.OSLICE,
		gc.OSLICEARR,
		gc.OSLICESTR,
		gc.OSLICE3,
		gc.OSLICE3ARR:
		if res.Op != gc.ONAME || res.Addable == 0 {
			var n1 gc.Node
			gc.Tempname(&n1, n.Type)
			gc.Cgen_slice(n, &n1)
			cgen(&n1, res)
		} else {
			gc.Cgen_slice(n, res)
		}
		return

	case gc.OEFACE:
		if res.Op != gc.ONAME || res.Addable == 0 {
			var n1 gc.Node
			gc.Tempname(&n1, n.Type)
			gc.Cgen_eface(n, &n1)
			cgen(&n1, res)
		} else {
			gc.Cgen_eface(n, res)
		}
		return
	}

	if n.Ullman >= gc.UINF {
		if n.Op == gc.OINDREG {
			gc.Fatal("cgen: this is going to misscompile")
		}
		if res.Ullman >= gc.UINF {
			var n1 gc.Node
			gc.Tempname(&n1, n.Type)
			cgen(n, &n1)
			cgen(&n1, res)
			return
		}
	}

	if gc.Isfat(n.Type) {
		if n.Type.Width < 0 {
			gc.Fatal("forgot to compute width for %v", gc.Tconv(n.Type, 0))
		}
		sgen(n, res, n.Type.Width)
		return
	}

	if res.Addable == 0 {
		if n.Ullman > res.Ullman {
			var n1 gc.Node
			regalloc(&n1, n.Type, res)
			cgen(n, &n1)
			if n1.Ullman > res.Ullman {
				gc.Dump("n1", &n1)
				gc.Dump("res", res)
				gc.Fatal("loop in cgen")
			}

			cgen(&n1, res)
			regfree(&n1)
			return
		}

		var f int
		if res.Ullman >= gc.UINF {
			goto gen
		}

		if gc.Complexop(n, res) {
			gc.Complexgen(n, res)
			return
		}

		f = 1 // gen thru register
		switch n.Op {
		case gc.OLITERAL:
			if gc.Smallintconst(n) {
				f = 0
			}

		case gc.OREGISTER:
			f = 0
		}

		if !gc.Iscomplex[n.Type.Etype] {
			a := optoas(gc.OAS, res.Type)
			var addr obj.Addr
			if sudoaddable(a, res, &addr) {
				var p1 *obj.Prog
				if f != 0 {
					var n2 gc.Node
					regalloc(&n2, res.Type, nil)
					cgen(n, &n2)
					p1 = gins(a, &n2, nil)
					regfree(&n2)
				} else {
					p1 = gins(a, n, nil)
				}
				p1.To = addr
				if gc.Debug['g'] != 0 {
					fmt.Printf("%v [ignore previous line]\n", p1)
				}
				sudoclean()
				return
			}
		}

	gen:
		var n1 gc.Node
		igen(res, &n1, nil)
		cgen(n, &n1)
		regfree(&n1)
		return
	}

	// update addressability for string, slice
	// can't do in walk because n->left->addable
	// changes if n->left is an escaping local variable.
	switch n.Op {
	case gc.OSPTR,
		gc.OLEN:
		if gc.Isslice(n.Left.Type) || gc.Istype(n.Left.Type, gc.TSTRING) {
			n.Addable = n.Left.Addable
		}

	case gc.OCAP:
		if gc.Isslice(n.Left.Type) {
			n.Addable = n.Left.Addable
		}

	case gc.OITAB:
		n.Addable = n.Left.Addable
	}

	if gc.Complexop(n, res) {
		gc.Complexgen(n, res)
		return
	}

	// if both are addressable, move
	if n.Addable != 0 {
		if n.Op == gc.OREGISTER || res.Op == gc.OREGISTER {
			gmove(n, res)
		} else {
			var n1 gc.Node
			regalloc(&n1, n.Type, nil)
			gmove(n, &n1)
			cgen(&n1, res)
			regfree(&n1)
		}

		return
	}

	nl := n.Left
	nr := n.Right

	if nl != nil && nl.Ullman >= gc.UINF {
		if nr != nil && nr.Ullman >= gc.UINF {
			var n1 gc.Node
			gc.Tempname(&n1, nl.Type)
			cgen(nl, &n1)
			n2 := *n
			n2.Left = &n1
			cgen(&n2, res)
			return
		}
	}

	if !gc.Iscomplex[n.Type.Etype] {
		a := optoas(gc.OAS, n.Type)
		var addr obj.Addr
		if sudoaddable(a, n, &addr) {
			if res.Op == gc.OREGISTER {
				p1 := gins(a, nil, res)
				p1.From = addr
			} else {
				var n2 gc.Node
				regalloc(&n2, n.Type, nil)
				p1 := gins(a, nil, &n2)
				p1.From = addr
				gins(a, &n2, res)
				regfree(&n2)
			}

			sudoclean()
			return
		}
	}

	// TODO(minux): we shouldn't reverse FP comparisons, but then we need to synthesize
	// OGE, OLE, and ONE ourselves.
	// if(nl != N && isfloat[n->type->etype] && isfloat[nl->type->etype]) goto flt;

	var a int
	switch n.Op {
	default:
		gc.Dump("cgen", n)
		gc.Fatal("cgen: unknown op %v", gc.Nconv(n, obj.FmtShort|obj.FmtSign))

		// these call bgen to get a bool value
	case gc.OOROR,
		gc.OANDAND,
		gc.OEQ,
		gc.ONE,
		gc.OLT,
		gc.OLE,
		gc.OGE,
		gc.OGT,
		gc.ONOT:
		p1 := gc.Gbranch(ppc64.ABR, nil, 0)

		p2 := gc.Pc
		gmove(gc.Nodbool(true), res)
		p3 := gc.Gbranch(ppc64.ABR, nil, 0)
		gc.Patch(p1, gc.Pc)
		bgen(n, true, 0, p2)
		gmove(gc.Nodbool(false), res)
		gc.Patch(p3, gc.Pc)
		return

	case gc.OPLUS:
		cgen(nl, res)
		return

		// unary
	case gc.OCOM:
		a := optoas(gc.OXOR, nl.Type)

		var n1 gc.Node
		regalloc(&n1, nl.Type, nil)
		cgen(nl, &n1)
		var n2 gc.Node
		gc.Nodconst(&n2, nl.Type, -1)
		gins(a, &n2, &n1)
		gmove(&n1, res)
		regfree(&n1)
		return

	case gc.OMINUS:
		if gc.Isfloat[nl.Type.Etype] {
			nr = gc.Nodintconst(-1)
			gc.Convlit(&nr, n.Type)
			a = optoas(gc.OMUL, nl.Type)
			goto sbop
		}

		a := optoas(int(n.Op), nl.Type)
		// unary
		var n1 gc.Node
		regalloc(&n1, nl.Type, res)

		cgen(nl, &n1)
		gins(a, nil, &n1)
		gmove(&n1, res)
		regfree(&n1)
		return

		// symmetric binary
	case gc.OAND,
		gc.OOR,
		gc.OXOR,
		gc.OADD,
		gc.OMUL:
		a = optoas(int(n.Op), nl.Type)

		goto sbop

		// asymmetric binary
	case gc.OSUB:
		a = optoas(int(n.Op), nl.Type)

		goto abop

	case gc.OHMUL:
		cgen_hmul(nl, nr, res)

	case gc.OCONV:
		if n.Type.Width > nl.Type.Width {
			// If loading from memory, do conversion during load,
			// so as to avoid use of 8-bit register in, say, int(*byteptr).
			switch nl.Op {
			case gc.ODOT,
				gc.ODOTPTR,
				gc.OINDEX,
				gc.OIND,
				gc.ONAME:
				var n1 gc.Node
				igen(nl, &n1, res)
				var n2 gc.Node
				regalloc(&n2, n.Type, res)
				gmove(&n1, &n2)
				gmove(&n2, res)
				regfree(&n2)
				regfree(&n1)
				return
			}
		}

		var n1 gc.Node
		regalloc(&n1, nl.Type, res)
		var n2 gc.Node
		regalloc(&n2, n.Type, &n1)
		cgen(nl, &n1)

		// if we do the conversion n1 -> n2 here
		// reusing the register, then gmove won't
		// have to allocate its own register.
		gmove(&n1, &n2)

		gmove(&n2, res)
		regfree(&n2)
		regfree(&n1)

	case gc.ODOT,
		gc.ODOTPTR,
		gc.OINDEX,
		gc.OIND,
		gc.ONAME: // PHEAP or PPARAMREF var
		var n1 gc.Node
		igen(n, &n1, res)

		gmove(&n1, res)
		regfree(&n1)

		// interface table is first word of interface value
	case gc.OITAB:
		var n1 gc.Node
		igen(nl, &n1, res)

		n1.Type = n.Type
		gmove(&n1, res)
		regfree(&n1)

		// pointer is the first word of string or slice.
	case gc.OSPTR:
		if gc.Isconst(nl, gc.CTSTR) {
			var n1 gc.Node
			regalloc(&n1, gc.Types[gc.Tptr], res)
			p1 := gins(ppc64.AMOVD, nil, &n1)
			gc.Datastring(nl.Val.U.Sval, &p1.From)
			gmove(&n1, res)
			regfree(&n1)
			break
		}

		var n1 gc.Node
		igen(nl, &n1, res)
		n1.Type = n.Type
		gmove(&n1, res)
		regfree(&n1)

	case gc.OLEN:
		if gc.Istype(nl.Type, gc.TMAP) || gc.Istype(nl.Type, gc.TCHAN) {
			// map and chan have len in the first int-sized word.
			// a zero pointer means zero length
			var n1 gc.Node
			regalloc(&n1, gc.Types[gc.Tptr], res)

			cgen(nl, &n1)

			var n2 gc.Node
			gc.Nodconst(&n2, gc.Types[gc.Tptr], 0)
			gins(optoas(gc.OCMP, gc.Types[gc.Tptr]), &n1, &n2)
			p1 := gc.Gbranch(optoas(gc.OEQ, gc.Types[gc.Tptr]), nil, 0)

			n2 = n1
			n2.Op = gc.OINDREG
			n2.Type = gc.Types[gc.Simtype[gc.TINT]]
			gmove(&n2, &n1)

			gc.Patch(p1, gc.Pc)

			gmove(&n1, res)
			regfree(&n1)
			break
		}

		if gc.Istype(nl.Type, gc.TSTRING) || gc.Isslice(nl.Type) {
			// both slice and string have len one pointer into the struct.
			// a zero pointer means zero length
			var n1 gc.Node
			igen(nl, &n1, res)

			n1.Type = gc.Types[gc.Simtype[gc.TUINT]]
			n1.Xoffset += int64(gc.Array_nel)
			gmove(&n1, res)
			regfree(&n1)
			break
		}

		gc.Fatal("cgen: OLEN: unknown type %v", gc.Tconv(nl.Type, obj.FmtLong))

	case gc.OCAP:
		if gc.Istype(nl.Type, gc.TCHAN) {
			// chan has cap in the second int-sized word.
			// a zero pointer means zero length
			var n1 gc.Node
			regalloc(&n1, gc.Types[gc.Tptr], res)

			cgen(nl, &n1)

			var n2 gc.Node
			gc.Nodconst(&n2, gc.Types[gc.Tptr], 0)
			gins(optoas(gc.OCMP, gc.Types[gc.Tptr]), &n1, &n2)
			p1 := gc.Gbranch(optoas(gc.OEQ, gc.Types[gc.Tptr]), nil, 0)

			n2 = n1
			n2.Op = gc.OINDREG
			n2.Xoffset = int64(gc.Widthint)
			n2.Type = gc.Types[gc.Simtype[gc.TINT]]
			gmove(&n2, &n1)

			gc.Patch(p1, gc.Pc)

			gmove(&n1, res)
			regfree(&n1)
			break
		}

		if gc.Isslice(nl.Type) {
			var n1 gc.Node
			igen(nl, &n1, res)
			n1.Type = gc.Types[gc.Simtype[gc.TUINT]]
			n1.Xoffset += int64(gc.Array_cap)
			gmove(&n1, res)
			regfree(&n1)
			break
		}

		gc.Fatal("cgen: OCAP: unknown type %v", gc.Tconv(nl.Type, obj.FmtLong))

	case gc.OADDR:
		if n.Bounded { // let race detector avoid nil checks
			gc.Disable_checknil++
		}
		agen(nl, res)
		if n.Bounded {
			gc.Disable_checknil--
		}

	case gc.OCALLMETH:
		gc.Cgen_callmeth(n, 0)
		cgen_callret(n, res)

	case gc.OCALLINTER:
		cgen_callinter(n, res, 0)
		cgen_callret(n, res)

	case gc.OCALLFUNC:
		cgen_call(n, 0)
		cgen_callret(n, res)

	case gc.OMOD,
		gc.ODIV:
		if gc.Isfloat[n.Type.Etype] {
			a = optoas(int(n.Op), nl.Type)
			goto abop
		}

		if nl.Ullman >= nr.Ullman {
			var n1 gc.Node
			regalloc(&n1, nl.Type, res)
			cgen(nl, &n1)
			cgen_div(int(n.Op), &n1, nr, res)
			regfree(&n1)
		} else {
			var n2 gc.Node
			if !gc.Smallintconst(nr) {
				regalloc(&n2, nr.Type, res)
				cgen(nr, &n2)
			} else {
				n2 = *nr
			}

			cgen_div(int(n.Op), nl, &n2, res)
			if n2.Op != gc.OLITERAL {
				regfree(&n2)
			}
		}

	case gc.OLSH,
		gc.ORSH,
		gc.OLROT:
		cgen_shift(int(n.Op), n.Bounded, nl, nr, res)
	}

	return

	/*
	 * put simplest on right - we'll generate into left
	 * and then adjust it using the computation of right.
	 * constants and variables have the same ullman
	 * count, so look for constants specially.
	 *
	 * an integer constant we can use as an immediate
	 * is simpler than a variable - we can use the immediate
	 * in the adjustment instruction directly - so it goes
	 * on the right.
	 *
	 * other constants, like big integers or floating point
	 * constants, require a mov into a register, so those
	 * might as well go on the left, so we can reuse that
	 * register for the computation.
	 */
sbop: // symmetric binary
	if nl.Ullman < nr.Ullman || (nl.Ullman == nr.Ullman && (gc.Smallintconst(nl) || (nr.Op == gc.OLITERAL && !gc.Smallintconst(nr)))) {
		r := nl
		nl = nr
		nr = r
	}

abop: // asymmetric binary
	var n1 gc.Node
	var n2 gc.Node
	if nl.Ullman >= nr.Ullman {
		regalloc(&n1, nl.Type, res)
		cgen(nl, &n1)

		/*
			 * This generates smaller code - it avoids a MOV - but it's
			 * easily 10% slower due to not being able to
			 * optimize/manipulate the move.
			 * To see, run: go test -bench . crypto/md5
			 * with and without.
			 *
				if(sudoaddable(a, nr, &addr)) {
					p1 = gins(a, N, &n1);
					p1->from = addr;
					gmove(&n1, res);
					sudoclean();
					regfree(&n1);
					goto ret;
				}
			 *
		*/
		// TODO(minux): enable using constants directly in certain instructions.
		//if(smallintconst(nr))
		//	n2 = *nr;
		//else {
		regalloc(&n2, nr.Type, nil)

		cgen(nr, &n2)
	} else //}
	{
		//if(smallintconst(nr))
		//	n2 = *nr;
		//else {
		regalloc(&n2, nr.Type, res)

		cgen(nr, &n2)

		//}
		regalloc(&n1, nl.Type, nil)

		cgen(nl, &n1)
	}

	gins(a, &n2, &n1)

	// Normalize result for types smaller than word.
	if n.Type.Width < int64(gc.Widthreg) {
		switch n.Op {
		case gc.OADD,
			gc.OSUB,
			gc.OMUL,
			gc.OLSH:
			gins(optoas(gc.OAS, n.Type), &n1, &n1)
		}
	}

	gmove(&n1, res)
	regfree(&n1)
	if n2.Op != gc.OLITERAL {
		regfree(&n2)
	}
	return
}