Example #1
0
File: asm.go Project: SpiderOak/go
func pereloc1(ctxt *ld.Link, r *ld.Reloc, sectoff int64) bool {
	var v uint32

	rs := r.Xsym

	if rs.Dynid < 0 {
		ctxt.Diag("reloc %d to non-coff symbol %s type=%d", r.Type, rs.Name, rs.Type)
		return false
	}

	ld.Thearch.Lput(uint32(sectoff))
	ld.Thearch.Lput(uint32(rs.Dynid))

	switch r.Type {
	default:
		return false

	case obj.R_ADDR:
		v = ld.IMAGE_REL_I386_DIR32

	case obj.R_CALL,
		obj.R_PCREL:
		v = ld.IMAGE_REL_I386_REL32
	}

	ld.Thearch.Wput(uint16(v))

	return true
}
Example #2
0
File: asm.go Project: SpiderOak/go
func machoreloc1(ctxt *ld.Link, r *ld.Reloc, sectoff int64) int {
	var v uint32

	rs := r.Xsym

	if rs.Type == obj.SHOSTOBJ || r.Type == obj.R_PCREL {
		if rs.Dynid < 0 {
			ctxt.Diag("reloc %d to non-macho symbol %s type=%d", r.Type, rs.Name, rs.Type)
			return -1
		}

		v = uint32(rs.Dynid)
		v |= 1 << 27 // external relocation
	} else {
		v = uint32(rs.Sect.Extnum)
		if v == 0 {
			ctxt.Diag("reloc %d to symbol %s in non-macho section %s type=%d", r.Type, rs.Name, rs.Sect.Name, rs.Type)
			return -1
		}
	}

	switch r.Type {
	default:
		return -1

	case obj.R_ADDR:
		v |= ld.MACHO_X86_64_RELOC_UNSIGNED << 28

	case obj.R_CALL:
		v |= 1 << 24 // pc-relative bit
		v |= ld.MACHO_X86_64_RELOC_BRANCH << 28

		// NOTE: Only works with 'external' relocation. Forced above.
	case obj.R_PCREL:
		v |= 1 << 24 // pc-relative bit
		v |= ld.MACHO_X86_64_RELOC_SIGNED << 28
	}

	switch r.Siz {
	default:
		return -1

	case 1:
		v |= 0 << 25

	case 2:
		v |= 1 << 25

	case 4:
		v |= 2 << 25

	case 8:
		v |= 3 << 25
	}

	ld.Thearch.Lput(uint32(sectoff))
	ld.Thearch.Lput(v)
	return 0
}
Example #3
0
File: asm.go Project: SpiderOak/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// jmpq *got+size
		ld.Adduint8(ctxt, plt, 0xff)

		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, got, got.Size)

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size)

		// pushl $x
		ld.Adduint8(ctxt, plt, 0x68)

		ld.Adduint32(ctxt, plt, uint32(rel.Size))

		// jmp .plt
		ld.Adduint8(ctxt, plt, 0xe9)

		ld.Adduint32(ctxt, plt, uint32(-(plt.Size + 4)))

		// rel
		ld.Addaddrplus(ctxt, rel, got, got.Size-4)

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_JMP_SLOT))

		s.Plt = int32(plt.Size - 16)
	} else if ld.HEADTYPE == obj.Hdarwin {
		// Same laziness as in 6l.

		plt := ld.Linklookup(ctxt, ".plt", 0)

		addgotsym(ctxt, s)

		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.plt", 0), uint32(s.Dynid))

		// jmpq *got+size(IP)
		s.Plt = int32(plt.Size)

		ld.Adduint8(ctxt, plt, 0xff)
		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, ld.Linklookup(ctxt, ".got", 0), int64(s.Got))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Example #4
0
func gentext(ctxt *ld.Link) {
	if ctxt.DynlinkingGo() {
		genaddmoduledata(ctxt)
	}

	if ld.Linkmode == ld.LinkInternal {
		genplt(ctxt)
	}
}
Example #5
0
File: asm.go Project: achanda/go
// Convert the direct jump relocation r to refer to a trampoline if the target is too far
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {
	switch r.Type {
	case obj.R_CALLARM:
		// r.Add is the instruction
		// low 24-bit encodes the target address
		t := (ld.Symaddr(r.Sym) + int64(signext24(r.Add&0xffffff)*4) - (s.Value + int64(r.Off))) / 4
		if t > 0x7fffff || t < -0x800000 || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			// direct call too far, need to insert trampoline.
			// look up existing trampolines first. if we found one within the range
			// of direct call, we can reuse it. otherwise create a new one.
			offset := (signext24(r.Add&0xffffff) + 2) * 4
			var tramp *ld.Symbol
			for i := 0; ; i++ {
				name := r.Sym.Name + fmt.Sprintf("%+d-tramp%d", offset, i)
				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Type == obj.SDYNIMPORT {
					// don't reuse trampoline defined in other module
					continue
				}
				if tramp.Value == 0 {
					// either the trampoline does not exist -- we need to create one,
					// or found one the address which is not assigned -- this will be
					// laid down immediately after the current function. use this one.
					break
				}

				t = (ld.Symaddr(tramp) - 8 - (s.Value + int64(r.Off))) / 4
				if t >= -0x800000 && t < 0x7fffff {
					// found an existing trampoline that is not too far
					// we can just use it
					break
				}
			}
			if tramp.Type == 0 {
				// trampoline does not exist, create one
				ctxt.AddTramp(tramp)
				if ctxt.DynlinkingGo() {
					if immrot(uint32(offset)) == 0 {
						ld.Errorf(s, "odd offset in dynlink direct call: %v+%d", r.Sym, offset)
					}
					gentrampdyn(tramp, r.Sym, int64(offset))
				} else if ld.Buildmode == ld.BuildmodeCArchive || ld.Buildmode == ld.BuildmodeCShared || ld.Buildmode == ld.BuildmodePIE {
					gentramppic(tramp, r.Sym, int64(offset))
				} else {
					gentramp(tramp, r.Sym, int64(offset))
				}
			}
			// modify reloc to point to tramp, which will be resolved later
			r.Sym = tramp
			r.Add = r.Add&0xff000000 | 0xfffffe // clear the offset embedded in the instruction
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}
Example #6
0
File: asm.go Project: SpiderOak/go
func machoreloc1(ctxt *ld.Link, r *ld.Reloc, sectoff int64) int {
	var v uint32

	rs := r.Xsym

	if rs.Type == obj.SHOSTOBJ {
		if rs.Dynid < 0 {
			ctxt.Diag("reloc %d to non-macho symbol %s type=%d", r.Type, rs.Name, rs.Type)
			return -1
		}

		v = uint32(rs.Dynid)
		v |= 1 << 27 // external relocation
	} else {
		v = uint32(rs.Sect.Extnum)
		if v == 0 {
			ctxt.Diag("reloc %d to symbol %s in non-macho section %s type=%d", r.Type, rs.Name, rs.Sect.Name, rs.Type)
			return -1
		}
	}

	switch r.Type {
	default:
		return -1

	case obj.R_ADDR:
		v |= ld.MACHO_GENERIC_RELOC_VANILLA << 28

	case obj.R_CALL,
		obj.R_PCREL:
		v |= 1 << 24 // pc-relative bit
		v |= ld.MACHO_GENERIC_RELOC_VANILLA << 28
	}

	switch r.Siz {
	default:
		return -1

	case 1:
		v |= 0 << 25

	case 2:
		v |= 1 << 25

	case 4:
		v |= 2 << 25

	case 8:
		v |= 3 << 25
	}

	ld.Thearch.Lput(uint32(sectoff))
	ld.Thearch.Lput(v)
	return 0
}
Example #7
0
File: asm.go Project: achanda/go
// gentext generates assembly to append the local moduledata to the global
// moduledata linked list at initialization time. This is only done if the runtime
// is in a different module.
//
// <go.link.addmoduledata>:
// 	larl  %r2, <local.moduledata>
// 	jg    <runtime.addmoduledata@plt>
//	undef
//
// The job of appending the moduledata is delegated to runtime.addmoduledata.
func gentext(ctxt *ld.Link) {
	if !ctxt.DynlinkingGo() {
		return
	}
	addmoduledata := ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ctxt.Syms.Lookup("go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable

	// larl %r2, <local.moduledata>
	ld.Adduint8(ctxt, initfunc, 0xc0)
	ld.Adduint8(ctxt, initfunc, 0x20)
	lmd := ld.Addrel(initfunc)
	lmd.Off = int32(initfunc.Size)
	lmd.Siz = 4
	lmd.Sym = ctxt.Moduledata
	lmd.Type = obj.R_PCREL
	lmd.Variant = ld.RV_390_DBL
	lmd.Add = 2 + int64(lmd.Siz)
	ld.Adduint32(ctxt, initfunc, 0)

	// jg <runtime.addmoduledata[@plt]>
	ld.Adduint8(ctxt, initfunc, 0xc0)
	ld.Adduint8(ctxt, initfunc, 0xf4)
	rel := ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 4
	rel.Sym = ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	rel.Type = obj.R_CALL
	rel.Variant = ld.RV_390_DBL
	rel.Add = 2 + int64(rel.Siz)
	ld.Adduint32(ctxt, initfunc, 0)

	// undef (for debugging)
	ld.Adduint32(ctxt, initfunc, 0)

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ctxt.Syms.Lookup("go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #8
0
// Convert the direct jump relocation r to refer to a trampoline if the target is too far
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {
	switch r.Type {
	case obj.R_CALLARM:
		// r.Add is the instruction
		// low 24-bit encodes the target address
		t := (ld.Symaddr(r.Sym) + int64(signext24(r.Add&0xffffff)*4) - (s.Value + int64(r.Off))) / 4
		if t > 0x7fffff || t < -0x800000 || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			// direct call too far, need to insert trampoline
			offset := (signext24(r.Add&0xffffff) + 2) * 4
			var tramp *ld.Symbol
			for i := 0; ; i++ {
				name := r.Sym.Name + fmt.Sprintf("%+d-tramp%d", offset, i)
				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Value == 0 {
					// either the trampoline does not exist -- we need to create one,
					// or found one the address which is not assigned -- this will be
					// laid down immediately after the current function. use this one.
					break
				}

				t = (ld.Symaddr(tramp) - 8 - (s.Value + int64(r.Off))) / 4
				if t >= -0x800000 && t < 0x7fffff {
					// found an existing trampoline that is not too far
					// we can just use it
					break
				}
			}
			if tramp.Type == 0 {
				// trampoline does not exist, create one
				ctxt.AddTramp(tramp)
				tramp.Size = 12 // 3 instructions
				tramp.P = make([]byte, tramp.Size)
				t = ld.Symaddr(r.Sym) + int64(offset)
				o1 := uint32(0xe5900000 | 11<<12 | 15<<16) // MOVW (R15), R11 // R15 is actual pc + 8
				o2 := uint32(0xe12fff10 | 11)              // JMP  (R11)
				o3 := uint32(t)                            // WORD $target
				ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
			}
			// modify reloc to point to tramp, which will be resolved later
			r.Sym = tramp
			r.Add = r.Add&0xff000000 | 0xfffffe // clear the offset embedded in the instruction
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}
Example #9
0
File: asm.go Project: SpiderOak/go
func addgotsyminternal(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)

	ld.Addaddrplus(ctxt, got, s, 0)

	if ld.Iself {
	} else {
		ctxt.Diag("addgotsyminternal: unsupported binary format")
	}
}
Example #10
0
File: asm.go Project: SpiderOak/go
func archrelocaddr(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, val *int64) int {
	var o1, o2 uint32
	if ctxt.Arch.ByteOrder == binary.BigEndian {
		o1 = uint32(*val >> 32)
		o2 = uint32(*val)
	} else {
		o1 = uint32(*val)
		o2 = uint32(*val >> 32)
	}

	// We are spreading a 31-bit address across two instructions, putting the
	// high (adjusted) part in the low 16 bits of the first instruction and the
	// low part in the low 16 bits of the second instruction, or, in the DS case,
	// bits 15-2 (inclusive) of the address into bits 15-2 of the second
	// instruction (it is an error in this case if the low 2 bits of the address
	// are non-zero).

	t := ld.Symaddr(ctxt, r.Sym) + r.Add
	if t < 0 || t >= 1<<31 {
		ctxt.Diag("relocation for %s is too big (>=2G): %d", s.Name, ld.Symaddr(ctxt, r.Sym))
	}
	if t&0x8000 != 0 {
		t += 0x10000
	}

	switch r.Type {
	case obj.R_ADDRPOWER:
		o1 |= (uint32(t) >> 16) & 0xffff
		o2 |= uint32(t) & 0xffff

	case obj.R_ADDRPOWER_DS:
		o1 |= (uint32(t) >> 16) & 0xffff
		if t&3 != 0 {
			ctxt.Diag("bad DS reloc for %s: %d", s.Name, ld.Symaddr(ctxt, r.Sym))
		}
		o2 |= uint32(t) & 0xfffc

	default:
		return -1
	}

	if ctxt.Arch.ByteOrder == binary.BigEndian {
		*val = int64(o1)<<32 | int64(o2)
	} else {
		*val = int64(o2)<<32 | int64(o1)
	}
	return 0
}
Example #11
0
func genaddmoduledata(ctxt *ld.Link) {
	addmoduledata := ctxt.Syms.ROLookup("runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ctxt.Syms.Lookup("go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ctxt, initfunc, op)
	}
	// addis r2, r12, .TOC.-func@ha
	rel := ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 8
	rel.Sym = ctxt.Syms.Lookup(".TOC.", 0)
	rel.Type = obj.R_ADDRPOWER_PCREL
	o(0x3c4c0000)
	// addi r2, r2, .TOC.-func@l
	o(0x38420000)
	// mflr r31
	o(0x7c0802a6)
	// stdu r31, -32(r1)
	o(0xf801ffe1)
	// addis r3, r2, local.moduledata@got@ha
	rel = ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 8
	rel.Sym = ctxt.Syms.Lookup("local.moduledata", 0)
	rel.Type = obj.R_ADDRPOWER_GOT
	o(0x3c620000)
	// ld r3, local.moduledata@got@l(r3)
	o(0xe8630000)
	// bl runtime.addmoduledata
	rel = ld.Addrel(initfunc)
	rel.Off = int32(initfunc.Size)
	rel.Siz = 4
	rel.Sym = addmoduledata
	rel.Type = obj.R_CALLPOWER
	o(0x48000001)
	// nop
	o(0x60000000)
	// ld r31, 0(r1)
	o(0xe8010000)
	// mtlr r31
	o(0x7c0803a6)
	// addi r1,r1,32
	o(0x38210020)
	// blr
	o(0x4e800020)

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ctxt.Syms.Lookup("go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #12
0
File: asm.go Project: SpiderOak/go
// Return the value of .TOC. for symbol s
func symtoc(ctxt *ld.Link, s *ld.Symbol) int64 {
	var toc *ld.Symbol

	if s.Outer != nil {
		toc = ld.Linkrlookup(ctxt, ".TOC.", int(s.Outer.Version))
	} else {
		toc = ld.Linkrlookup(ctxt, ".TOC.", int(s.Version))
	}

	if toc == nil {
		ctxt.Diag("TOC-relative relocation in object without .TOC.")
		return 0
	}

	return toc.Value
}
Example #13
0
File: asm.go Project: hurkgu/go
func archrelocvariant(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, t int64) int64 {
	switch r.Variant & ld.RV_TYPE_MASK {
	default:
		ctxt.Diag("unexpected relocation variant %d", r.Variant)
		return t

	case ld.RV_NONE:
		return t

	case ld.RV_390_DBL:
		if (t & 1) != 0 {
			ctxt.Diag("%s+%v is not 2-byte aligned", r.Sym.Name, r.Sym.Value)
		}
		return t >> 1
	}
}
Example #14
0
func gentext(ctxt *ld.Link) {
	if !ctxt.DynlinkingGo() {
		return
	}
	addmoduledata := ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT && ld.Buildmode != ld.BuildmodePlugin {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ctxt.Syms.Lookup("go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ctxt, initfunc, op)
	}
	o(0xe59f0004)
	o(0xe08f0000)

	o(0xeafffffe)
	rel := ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM
	rel.Add = 0xeafffffe // vomit

	o(0x00000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 12
	rel.Siz = 4
	rel.Sym = ctxt.Moduledata
	rel.Type = obj.R_PCREL
	rel.Add = 4

	if ld.Buildmode == ld.BuildmodePlugin {
		ctxt.Textp = append(ctxt.Textp, addmoduledata)
	}
	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ctxt.Syms.Lookup("go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #15
0
File: asm.go Project: achanda/go
func gentext(ctxt *ld.Link) {
	if !ctxt.DynlinkingGo() {
		return
	}
	addmoduledata := ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ctxt.Syms.Lookup("go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op uint32) {
		ld.Adduint32(ctxt, initfunc, op)
	}
	// 0000000000000000 <local.dso_init>:
	// 0:	90000000 	adrp	x0, 0 <runtime.firstmoduledata>
	// 	0: R_AARCH64_ADR_PREL_PG_HI21	local.moduledata
	// 4:	91000000 	add	x0, x0, #0x0
	// 	4: R_AARCH64_ADD_ABS_LO12_NC	local.moduledata
	o(0x90000000)
	o(0x91000000)
	rel := ld.Addrel(initfunc)
	rel.Off = 0
	rel.Siz = 8
	rel.Sym = ctxt.Moduledata
	rel.Type = obj.R_ADDRARM64

	// 8:	14000000 	bl	0 <runtime.addmoduledata>
	// 	8: R_AARCH64_CALL26	runtime.addmoduledata
	o(0x14000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM64 // Really should be R_AARCH64_JUMP26 but doesn't seem to make any difference

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ctxt.Syms.Lookup("go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #16
0
File: asm.go Project: SpiderOak/go
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ld.Linklookup(ctxt, ".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_GLOB_DAT))
	} else {
		ctxt.Diag("addgotsym: unsupported binary format")
	}
}
Example #17
0
File: asm.go Project: SpiderOak/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// Create the glink resolver if necessary
		glink := ensureglinkresolver(ctxt)

		// Write symbol resolver stub (just a branch to the
		// glink resolver stub)
		r := ld.Addrel(glink)

		r.Sym = glink
		r.Off = int32(glink.Size)
		r.Siz = 4
		r.Type = obj.R_CALLPOWER
		ld.Adduint32(ctxt, glink, 0x48000000) // b .glink

		// In the ppc64 ABI, the dynamic linker is responsible
		// for writing the entire PLT.  We just need to
		// reserve 8 bytes for each PLT entry and generate a
		// JMP_SLOT dynamic relocation for it.
		//
		// TODO(austin): ABI v1 is different
		s.Plt = int32(plt.Size)

		plt.Size += 8

		ld.Addaddrplus(ctxt, rela, plt, int64(s.Plt))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_PPC64_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Example #18
0
File: asm.go Project: achanda/go
func gentext(ctxt *ld.Link) {
	if !ctxt.DynlinkingGo() {
		return
	}
	addmoduledata := ctxt.Syms.Lookup("runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT && ld.Buildmode != ld.BuildmodePlugin {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Attr |= ld.AttrReachable
	initfunc := ctxt.Syms.Lookup("go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op ...uint8) {
		for _, op1 := range op {
			ld.Adduint8(ctxt, initfunc, op1)
		}
	}
	// 0000000000000000 <local.dso_init>:
	//    0:	48 8d 3d 00 00 00 00 	lea    0x0(%rip),%rdi        # 7 <local.dso_init+0x7>
	// 			3: R_X86_64_PC32	runtime.firstmoduledata-0x4
	o(0x48, 0x8d, 0x3d)
	ld.Addpcrelplus(ctxt, initfunc, ctxt.Moduledata, 0)
	//    7:	e8 00 00 00 00       	callq  c <local.dso_init+0xc>
	// 			8: R_X86_64_PLT32	runtime.addmoduledata-0x4
	o(0xe8)
	Addcall(ctxt, initfunc, addmoduledata)
	//    c:	c3                   	retq
	o(0xc3)
	if ld.Buildmode == ld.BuildmodePlugin {
		ctxt.Textp = append(ctxt.Textp, addmoduledata)
	}
	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ctxt.Syms.Lookup("go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #19
0
File: asm.go Project: SpiderOak/go
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint64(ctxt, got, 0)

	if ld.Iself {
		rela := ld.Linklookup(ctxt, ".rela", 0)
		ld.Addaddrplus(ctxt, rela, got, int64(s.Got))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_X86_64_GLOB_DAT))
		ld.Adduint64(ctxt, rela, 0)
	} else if ld.HEADTYPE == obj.Hdarwin {
		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(s.Dynid))
	} else {
		ctxt.Diag("addgotsym: unsupported binary format")
	}
}
Example #20
0
File: asm.go Project: SpiderOak/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// .got entry
		s.Got = int32(got.Size)

		// In theory, all GOT should point to the first PLT entry,
		// Linux/ARM's dynamic linker will do that for us, but FreeBSD/ARM's
		// dynamic linker won't, so we'd better do it ourselves.
		ld.Addaddrplus(ctxt, got, plt, 0)

		// .plt entry, this depends on the .got entry
		s.Plt = int32(plt.Size)

		addpltreloc(ctxt, plt, got, s, obj.R_PLT0) // add lr, pc, #0xXX00000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT1) // add lr, lr, #0xYY000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT2) // ldr pc, [lr, #0xZZZ]!

		// rel
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_JUMP_SLOT))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Example #21
0
File: asm.go Project: SpiderOak/go
func archreloc(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		case obj.R_CALLARM:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym

			r.Xadd = r.Add
			if r.Xadd&0x800000 != 0 {
				r.Xadd |= ^0xffffff
			}
			r.Xadd *= 4
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(ctxt, rs) - ld.Symaddr(ctxt, rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ctxt.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			// ld64 for arm seems to want the symbol table to contain offset
			// into the section rather than pseudo virtual address that contains
			// the section load address.
			// we need to compensate that by removing the instruction's address
			// from addend.
			if ld.HEADTYPE == obj.Hdarwin {
				r.Xadd -= ld.Symaddr(ctxt, s) + int64(r.Off)
			}

			*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32(r.Xadd/4))))
			return 0
		}

		return -1
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(ctxt, r.Sym) + r.Add - ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got", 0))
		return 0

		// The following three arch specific relocations are only for generation of
	// Linux/ARM ELF's PLT entry (3 assembler instruction)
	case obj.R_PLT0: // add ip, pc, #0xXX00000
		if ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got.plt", 0)) < ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0)) {
			ctxt.Diag(".got.plt should be placed after .plt section.")
		}
		*val = 0xe28fc600 + (0xff & (int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add)) >> 20))
		return 0

	case obj.R_PLT1: // add ip, ip, #0xYY000
		*val = 0xe28cca00 + (0xff & (int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add+4)) >> 12))

		return 0

	case obj.R_PLT2: // ldr pc, [ip, #0xZZZ]!
		*val = 0xe5bcf000 + (0xfff & int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add+8)))

		return 0

	case obj.R_CALLARM: // bl XXXXXX or b YYYYYY
		*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32((ld.Symaddr(ctxt, r.Sym)+int64((uint32(r.Add))*4)-(s.Value+int64(r.Off)))/4))))

		return 0
	}

	return -1
}
Example #22
0
File: asm.go Project: SpiderOak/go
func machoreloc1(ctxt *ld.Link, r *ld.Reloc, sectoff int64) int {
	var v uint32

	rs := r.Xsym

	if r.Type == obj.R_PCREL {
		if rs.Type == obj.SHOSTOBJ {
			ctxt.Diag("pc-relative relocation of external symbol is not supported")
			return -1
		}
		if r.Siz != 4 {
			return -1
		}

		// emit a pair of "scattered" relocations that
		// resolve to the difference of section addresses of
		// the symbol and the instruction
		// this value is added to the field being relocated
		o1 := uint32(sectoff)
		o1 |= 1 << 31 // scattered bit
		o1 |= ld.MACHO_ARM_RELOC_SECTDIFF << 24
		o1 |= 2 << 28 // size = 4

		o2 := uint32(0)
		o2 |= 1 << 31 // scattered bit
		o2 |= ld.MACHO_ARM_RELOC_PAIR << 24
		o2 |= 2 << 28 // size = 4

		ld.Thearch.Lput(o1)
		ld.Thearch.Lput(uint32(ld.Symaddr(ctxt, rs)))
		ld.Thearch.Lput(o2)
		ld.Thearch.Lput(uint32(ctxt.Cursym.Value + int64(r.Off)))
		return 0
	}

	if rs.Type == obj.SHOSTOBJ || r.Type == obj.R_CALLARM {
		if rs.Dynid < 0 {
			ctxt.Diag("reloc %d to non-macho symbol %s type=%d", r.Type, rs.Name, rs.Type)
			return -1
		}

		v = uint32(rs.Dynid)
		v |= 1 << 27 // external relocation
	} else {
		v = uint32(rs.Sect.Extnum)
		if v == 0 {
			ctxt.Diag("reloc %d to symbol %s in non-macho section %s type=%d", r.Type, rs.Name, rs.Sect.Name, rs.Type)
			return -1
		}
	}

	switch r.Type {
	default:
		return -1

	case obj.R_ADDR:
		v |= ld.MACHO_GENERIC_RELOC_VANILLA << 28

	case obj.R_CALLARM:
		v |= 1 << 24 // pc-relative bit
		v |= ld.MACHO_ARM_RELOC_BR24 << 28
	}

	switch r.Siz {
	default:
		return -1

	case 1:
		v |= 0 << 25

	case 2:
		v |= 1 << 25

	case 4:
		v |= 2 << 25

	case 8:
		v |= 3 << 25
	}

	ld.Thearch.Lput(uint32(sectoff))
	ld.Thearch.Lput(v)
	return 0
}
Example #23
0
File: asm.go Project: SpiderOak/go
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_ARM_PLT32:
		r.Type = obj.R_CALLARM

		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
		}

		return

	case 256 + ld.R_ARM_THM_PC22: // R_ARM_THM_CALL
		ld.Exitf("R_ARM_THM_CALL, are you using -marm?")
		return

	case 256 + ld.R_ARM_GOT32: // R_ARM_GOT_BREL
		if targ.Type != obj.SDYNIMPORT {
			addgotsyminternal(ctxt, targ)
		} else {
			addgotsym(ctxt, targ)
		}

		r.Type = obj.R_CONST // write r->add during relocsym
		r.Sym = nil
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_ARM_GOT_PREL: // GOT(nil) + A - nil
		if targ.Type != obj.SDYNIMPORT {
			addgotsyminternal(ctxt, targ)
		} else {
			addgotsym(ctxt, targ)
		}

		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got) + 4
		return

	case 256 + ld.R_ARM_GOTOFF: // R_ARM_GOTOFF32
		r.Type = obj.R_GOTOFF

		return

	case 256 + ld.R_ARM_GOTPC: // R_ARM_BASE_PREL
		r.Type = obj.R_PCREL

		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += 4
		return

	case 256 + ld.R_ARM_CALL:
		r.Type = obj.R_CALLARM
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
		}

		return

	case 256 + ld.R_ARM_REL32: // R_ARM_REL32
		r.Type = obj.R_PCREL

		r.Add += 4
		return

	case 256 + ld.R_ARM_ABS32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_ARM_ABS32 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

		// we can just ignore this, because we are targeting ARM V5+ anyway
	case 256 + ld.R_ARM_V4BX:
		if r.Sym != nil {
			// R_ARM_V4BX is ABS relocation, so this symbol is a dummy symbol, ignore it
			r.Sym.Type = 0
		}

		r.Sym = nil
		return

	case 256 + ld.R_ARM_PC24,
		256 + ld.R_ARM_JUMP24:
		r.Type = obj.R_CALLARM
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
		}

		return
	}

	// Handle references to ELF symbols from our own object files.
	if targ.Type != obj.SDYNIMPORT {
		return
	}

	switch r.Type {
	case obj.R_CALLARM:
		addpltsym(ctxt, targ)
		r.Sym = ld.Linklookup(ctxt, ".plt", 0)
		r.Add = int64(targ.Plt)
		return

	case obj.R_ADDR:
		if s.Type != obj.SDATA {
			break
		}
		if ld.Iself {
			ld.Adddynsym(ctxt, targ)
			rel := ld.Linklookup(ctxt, ".rel", 0)
			ld.Addaddrplus(ctxt, rel, s, int64(r.Off))
			ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_ARM_GLOB_DAT)) // we need a nil + A dynamic reloc
			r.Type = obj.R_CONST                                                            // write r->add during relocsym
			r.Sym = nil
			return
		}
	}

	ctxt.Cursym = s
	ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
Example #24
0
File: asm.go Project: SpiderOak/go
func gentext(ctxt *ld.Link) {
	if !ld.DynlinkingGo() && ld.Buildmode != ld.BuildmodePIE && ld.Buildmode != ld.BuildmodeCShared {
		return
	}

	// Generate little thunks that load the PC of the next instruction into a register.
	for _, r := range [...]struct {
		name string
		num  uint8
	}{
		{"ax", 0},
		{"cx", 1},
		{"dx", 2},
		{"bx", 3},
		// sp
		{"bp", 5},
		{"si", 6},
		{"di", 7},
	} {
		thunkfunc := ld.Linklookup(ctxt, "__x86.get_pc_thunk."+r.name, 0)
		thunkfunc.Type = obj.STEXT
		thunkfunc.Attr |= ld.AttrLocal
		thunkfunc.Attr |= ld.AttrReachable //TODO: remove?
		o := func(op ...uint8) {
			for _, op1 := range op {
				ld.Adduint8(ctxt, thunkfunc, op1)
			}
		}
		// 8b 04 24	mov    (%esp),%eax
		// Destination register is in bits 3-5 of the middle byte, so add that in.
		o(0x8b, 0x04+r.num<<3, 0x24)
		// c3		ret
		o(0xc3)

		ctxt.Textp = append(ctxt.Textp, thunkfunc)
	}

	addmoduledata := ld.Linklookup(ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}

	addmoduledata.Attr |= ld.AttrReachable

	initfunc := ld.Linklookup(ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Attr |= ld.AttrLocal
	initfunc.Attr |= ld.AttrReachable
	o := func(op ...uint8) {
		for _, op1 := range op {
			ld.Adduint8(ctxt, initfunc, op1)
		}
	}

	// go.link.addmoduledata:
	//      53                      push %ebx
	//      e8 00 00 00 00          call __x86.get_pc_thunk.cx + R_CALL __x86.get_pc_thunk.cx
	//      8d 81 00 00 00 00       lea 0x0(%ecx), %eax + R_PCREL ctxt.Moduledata
	//      8d 99 00 00 00 00       lea 0x0(%ecx), %ebx + R_GOTPC _GLOBAL_OFFSET_TABLE_
	//      e8 00 00 00 00          call runtime.addmoduledata@plt + R_CALL runtime.addmoduledata
	//      5b                      pop %ebx
	//      c3                      ret

	o(0x53)

	o(0xe8)
	addcall(ctxt, initfunc, ld.Linklookup(ctxt, "__x86.get_pc_thunk.cx", 0))

	o(0x8d, 0x81)
	ld.Addpcrelplus(ctxt, initfunc, ctxt.Moduledata, 6)

	o(0x8d, 0x99)
	i := initfunc.Size
	initfunc.Size += 4
	ld.Symgrow(ctxt, initfunc, initfunc.Size)
	r := ld.Addrel(initfunc)
	r.Sym = ld.Linklookup(ctxt, "_GLOBAL_OFFSET_TABLE_", 0)
	r.Off = int32(i)
	r.Type = obj.R_PCREL
	r.Add = 12
	r.Siz = 4

	o(0xe8)
	addcall(ctxt, initfunc, addmoduledata)

	o(0x5b)

	o(0xc3)

	ctxt.Textp = append(ctxt.Textp, initfunc)
	initarray_entry := ld.Linklookup(ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Attr |= ld.AttrReachable
	initarray_entry.Attr |= ld.AttrLocal
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ctxt, initarray_entry, initfunc)
}
Example #25
0
File: asm.go Project: SpiderOak/go
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_386_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_386_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return

	case 256 + ld.R_386_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return

	case 256 + ld.R_386_GOT32, 256 + ld.R_386_GOT32X:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVL of GOT entry into LEAL of symbol address, relative to GOT.
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_GOTOFF
				return
			}

			if r.Off >= 2 && s.P[r.Off-2] == 0xff && s.P[r.Off-1] == 0xb3 {
				// turn PUSHL of GOT entry into PUSHL of symbol itself.
				// use unnecessary SS prefix to keep instruction same length.
				s.P[r.Off-2] = 0x36

				s.P[r.Off-1] = 0x68
				r.Type = obj.R_ADDR
				return
			}

			ctxt.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
			return
		}

		addgotsym(ctxt, targ)
		r.Type = obj.R_CONST // write r->add during relocsym
		r.Sym = nil
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_386_GOTOFF:
		r.Type = obj.R_GOTOFF
		return

	case 256 + ld.R_386_GOTPC:
		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += 4
		return

	case 256 + ld.R_386_32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_386_32 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 0:
		r.Type = obj.R_ADDR
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return
		}

		r.Type = obj.R_PCREL
		return

	case 512 + ld.MACHO_FAKE_GOTPCREL:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			// turn MOVL of GOT entry into LEAL of symbol itself
			if r.Off < 2 || s.P[r.Off-2] != 0x8b {
				ctxt.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
				return
			}

			s.P[r.Off-2] = 0x8d
			r.Type = obj.R_PCREL
			return
		}

		addgotsym(ctxt, targ)
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got)
		r.Type = obj.R_PCREL
		return
	}

	// Handle references to ELF symbols from our own object files.
	if targ.Type != obj.SDYNIMPORT {
		return
	}

	switch r.Type {
	case obj.R_CALL,
		obj.R_PCREL:
		addpltsym(ctxt, targ)
		r.Sym = ld.Linklookup(ctxt, ".plt", 0)
		r.Add = int64(targ.Plt)
		return

	case obj.R_ADDR:
		if s.Type != obj.SDATA {
			break
		}
		if ld.Iself {
			ld.Adddynsym(ctxt, targ)
			rel := ld.Linklookup(ctxt, ".rel", 0)
			ld.Addaddrplus(ctxt, rel, s, int64(r.Off))
			ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_386_32))
			r.Type = obj.R_CONST // write r->add during relocsym
			r.Sym = nil
			return
		}

		if ld.HEADTYPE == obj.Hdarwin && s.Size == int64(ld.SysArch.PtrSize) && r.Off == 0 {
			// Mach-O relocations are a royal pain to lay out.
			// They use a compact stateful bytecode representation
			// that is too much bother to deal with.
			// Instead, interpret the C declaration
			//	void *_Cvar_stderr = &stderr;
			// as making _Cvar_stderr the name of a GOT entry
			// for stderr. This is separate from the usual GOT entry,
			// just in case the C code assigns to the variable,
			// and of course it only works for single pointers,
			// but we only need to support cgo and that's all it needs.
			ld.Adddynsym(ctxt, targ)

			got := ld.Linklookup(ctxt, ".got", 0)
			s.Type = got.Type | obj.SSUB
			s.Outer = got
			s.Sub = got.Sub
			got.Sub = s
			s.Value = got.Size
			ld.Adduint32(ctxt, got, 0)
			ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
			r.Type = 256 // ignore during relocsym
			return
		}

		if ld.HEADTYPE == obj.Hwindows && s.Size == int64(ld.SysArch.PtrSize) {
			// nothing to do, the relocation will be laid out in pereloc1
			return
		}
	}

	ctxt.Cursym = s
	ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
Example #26
0
File: asm.go Project: hurkgu/go
func asmb(ctxt *ld.Link) {
	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f asmb\n", obj.Cputime())
	}

	if ld.Iself {
		ld.Asmbelfsetup(ctxt)
	}

	sect := ld.Segtext.Sect
	ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
	ld.Codeblk(ctxt, int64(sect.Vaddr), int64(sect.Length))
	for sect = sect.Next; sect != nil; sect = sect.Next {
		ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
		ld.Datblk(ctxt, int64(sect.Vaddr), int64(sect.Length))
	}

	if ld.Segrodata.Filelen > 0 {
		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f rodatblk\n", obj.Cputime())
		}

		ld.Cseek(int64(ld.Segrodata.Fileoff))
		ld.Datblk(ctxt, int64(ld.Segrodata.Vaddr), int64(ld.Segrodata.Filelen))
	}

	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f datblk\n", obj.Cputime())
	}

	ld.Cseek(int64(ld.Segdata.Fileoff))
	ld.Datblk(ctxt, int64(ld.Segdata.Vaddr), int64(ld.Segdata.Filelen))

	ld.Cseek(int64(ld.Segdwarf.Fileoff))
	ld.Dwarfblk(ctxt, int64(ld.Segdwarf.Vaddr), int64(ld.Segdwarf.Filelen))

	/* output symbol table */
	ld.Symsize = 0

	ld.Lcsize = 0
	symo := uint32(0)
	if !*ld.FlagS {
		if !ld.Iself {
			ctxt.Diag("unsupported executable format")
		}
		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f sym\n", obj.Cputime())
		}
		symo = uint32(ld.Segdwarf.Fileoff + ld.Segdwarf.Filelen)
		symo = uint32(ld.Rnd(int64(symo), int64(*ld.FlagRound)))

		ld.Cseek(int64(symo))
		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f elfsym\n", obj.Cputime())
		}
		ld.Asmelfsym(ctxt)
		ld.Cflush()
		ld.Cwrite(ld.Elfstrdat)

		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f dwarf\n", obj.Cputime())
		}

		if ld.Linkmode == ld.LinkExternal {
			ld.Elfemitreloc(ctxt)
		}
	}

	ctxt.Cursym = nil
	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f header\n", obj.Cputime())
	}
	ld.Cseek(0)
	switch ld.HEADTYPE {
	default:
		ctxt.Diag("unsupported operating system")
	case obj.Hlinux:
		ld.Asmbelf(ctxt, int64(symo))
	}

	ld.Cflush()
	if *ld.FlagC {
		fmt.Printf("textsize=%d\n", ld.Segtext.Filelen)
		fmt.Printf("datsize=%d\n", ld.Segdata.Filelen)
		fmt.Printf("bsssize=%d\n", ld.Segdata.Length-ld.Segdata.Filelen)
		fmt.Printf("symsize=%d\n", ld.Symsize)
		fmt.Printf("lcsize=%d\n", ld.Lcsize)
		fmt.Printf("total=%d\n", ld.Segtext.Filelen+ld.Segdata.Length+uint64(ld.Symsize)+uint64(ld.Lcsize))
	}
}
Example #27
0
File: asm.go Project: hurkgu/go
func archreloc(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_ADDRMIPS,
			obj.R_ADDRMIPSU:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(ctxt, rs) - ld.Symaddr(ctxt, rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ctxt.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			return 0

		case obj.R_ADDRMIPSTLS,
			obj.R_CALLMIPS,
			obj.R_JMPMIPS:
			r.Done = 0
			r.Xsym = r.Sym
			r.Xadd = r.Add
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(ctxt, r.Sym) + r.Add - ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got", 0))
		return 0

	case obj.R_ADDRMIPS,
		obj.R_ADDRMIPSU:
		t := ld.Symaddr(ctxt, r.Sym) + r.Add
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		if r.Type == obj.R_ADDRMIPS {
			*val = int64(o1&0xffff0000 | uint32(t)&0xffff)
		} else {
			*val = int64(o1&0xffff0000 | uint32((t+1<<15)>>16)&0xffff)
		}
		return 0

	case obj.R_ADDRMIPSTLS:
		// thread pointer is at 0x7000 offset from the start of TLS data area
		t := ld.Symaddr(ctxt, r.Sym) + r.Add - 0x7000
		if t < -32768 || t >= 32678 {
			ctxt.Diag("TLS offset out of range %d", t)
		}
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		*val = int64(o1&0xffff0000 | uint32(t)&0xffff)
		return 0

	case obj.R_CALLMIPS,
		obj.R_JMPMIPS:
		// Low 26 bits = (S + A) >> 2
		t := ld.Symaddr(ctxt, r.Sym) + r.Add
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		*val = int64(o1&0xfc000000 | uint32(t>>2)&^0xfc000000)
		return 0
	}

	return -1
}
Example #28
0
File: asm.go Project: hurkgu/go
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_390_12,
		256 + ld.R_390_GOT12:
		ctxt.Diag("s390x 12-bit relocations have not been implemented (relocation type %d)", r.Type-256)
		return

	case 256 + ld.R_390_8,
		256 + ld.R_390_16,
		256 + ld.R_390_32,
		256 + ld.R_390_64:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_nn relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	case 256 + ld.R_390_PC16,
		256 + ld.R_390_PC32,
		256 + ld.R_390_PC64:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_PCnn relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += int64(r.Siz)
		return

	case 256 + ld.R_390_GOT16,
		256 + ld.R_390_GOT32,
		256 + ld.R_390_GOT64:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
		return

	case 256 + ld.R_390_PLT16DBL,
		256 + ld.R_390_PLT32DBL:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}
		return

	case 256 + ld.R_390_PLT32,
		256 + ld.R_390_PLT64:
		r.Type = obj.R_PCREL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}
		return

	case 256 + ld.R_390_COPY:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_GLOB_DAT:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_JMP_SLOT:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_RELATIVE:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_GOTOFF:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_GOTOFF relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_GOTOFF
		return

	case 256 + ld.R_390_GOTPC:
		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(r.Siz)
		return

	case 256 + ld.R_390_PC16DBL,
		256 + ld.R_390_PC32DBL:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_PCnnDBL relocation for dynamic symbol %s", targ.Name)
		}
		return

	case 256 + ld.R_390_GOTPCDBL:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(r.Siz)
		return

	case 256 + ld.R_390_GOTENT:
		addgotsym(ctxt, targ)

		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got)
		r.Add += int64(r.Siz)
		return
	}
	// Handle references to ELF symbols from our own object files.
	if targ.Type != obj.SDYNIMPORT {
		return
	}

	ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
Example #29
0
File: asm.go Project: hurkgu/go
func asmb(ctxt *ld.Link) {
	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f asmb\n", obj.Cputime())
	}

	if ld.Iself {
		ld.Asmbelfsetup(ctxt)
	}

	sect := ld.Segtext.Sect
	ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
	ld.Codeblk(ctxt, int64(sect.Vaddr), int64(sect.Length))
	for sect = sect.Next; sect != nil; sect = sect.Next {
		ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
		ld.Datblk(ctxt, int64(sect.Vaddr), int64(sect.Length))
	}

	if ld.Segrodata.Filelen > 0 {
		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f rodatblk\n", obj.Cputime())
		}

		ld.Cseek(int64(ld.Segrodata.Fileoff))
		ld.Datblk(ctxt, int64(ld.Segrodata.Vaddr), int64(ld.Segrodata.Filelen))
	}

	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f datblk\n", obj.Cputime())
	}

	ld.Cseek(int64(ld.Segdata.Fileoff))
	ld.Datblk(ctxt, int64(ld.Segdata.Vaddr), int64(ld.Segdata.Filelen))

	ld.Cseek(int64(ld.Segdwarf.Fileoff))
	ld.Dwarfblk(ctxt, int64(ld.Segdwarf.Vaddr), int64(ld.Segdwarf.Filelen))

	/* output symbol table */
	ld.Symsize = 0

	ld.Lcsize = 0
	symo := uint32(0)
	if !*ld.FlagS {
		// TODO: rationalize
		if ctxt.Debugvlog != 0 {
			ctxt.Logf("%5.2f sym\n", obj.Cputime())
		}
		switch ld.HEADTYPE {
		default:
			if ld.Iself {
				symo = uint32(ld.Segdwarf.Fileoff + ld.Segdwarf.Filelen)
				symo = uint32(ld.Rnd(int64(symo), int64(*ld.FlagRound)))
			}

		case obj.Hplan9:
			symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
		}

		ld.Cseek(int64(symo))
		switch ld.HEADTYPE {
		default:
			if ld.Iself {
				if ctxt.Debugvlog != 0 {
					ctxt.Logf("%5.2f elfsym\n", obj.Cputime())
				}
				ld.Asmelfsym(ctxt)
				ld.Cflush()
				ld.Cwrite(ld.Elfstrdat)

				if ld.Linkmode == ld.LinkExternal {
					ld.Elfemitreloc(ctxt)
				}
			}

		case obj.Hplan9:
			ld.Asmplan9sym(ctxt)
			ld.Cflush()

			sym := ld.Linklookup(ctxt, "pclntab", 0)
			if sym != nil {
				ld.Lcsize = int32(len(sym.P))
				for i := 0; int32(i) < ld.Lcsize; i++ {
					ld.Cput(sym.P[i])
				}

				ld.Cflush()
			}
		}
	}

	ctxt.Cursym = nil
	if ctxt.Debugvlog != 0 {
		ctxt.Logf("%5.2f header\n", obj.Cputime())
	}
	ld.Cseek(0)
	switch ld.HEADTYPE {
	default:
	case obj.Hplan9: /* plan 9 */
		magic := uint32(4*18*18 + 7)
		if ld.SysArch == sys.ArchMIPS64LE {
			magic = uint32(4*26*26 + 7)
		}
		ld.Thearch.Lput(magic)                      /* magic */
		ld.Thearch.Lput(uint32(ld.Segtext.Filelen)) /* sizes */
		ld.Thearch.Lput(uint32(ld.Segdata.Filelen))
		ld.Thearch.Lput(uint32(ld.Segdata.Length - ld.Segdata.Filelen))
		ld.Thearch.Lput(uint32(ld.Symsize))          /* nsyms */
		ld.Thearch.Lput(uint32(ld.Entryvalue(ctxt))) /* va of entry */
		ld.Thearch.Lput(0)
		ld.Thearch.Lput(uint32(ld.Lcsize))

	case obj.Hlinux,
		obj.Hfreebsd,
		obj.Hnetbsd,
		obj.Hopenbsd,
		obj.Hnacl:
		ld.Asmbelf(ctxt, int64(symo))
	}

	ld.Cflush()
	if *ld.FlagC {
		fmt.Printf("textsize=%d\n", ld.Segtext.Filelen)
		fmt.Printf("datsize=%d\n", ld.Segdata.Filelen)
		fmt.Printf("bsssize=%d\n", ld.Segdata.Length-ld.Segdata.Filelen)
		fmt.Printf("symsize=%d\n", ld.Symsize)
		fmt.Printf("lcsize=%d\n", ld.Lcsize)
		fmt.Printf("total=%d\n", ld.Segtext.Filelen+ld.Segdata.Length+uint64(ld.Symsize)+uint64(ld.Lcsize))
	}
}
Example #30
0
File: asm.go Project: hurkgu/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}
		// larl    %r1,_GLOBAL_OFFSET_TABLE_+index

		ld.Adduint8(ctxt, plt, 0xc0)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Addpcrelplus(ctxt, plt, got, got.Size+6) // need variant?

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size+8) // weird but correct
		// lg      %r1,0(%r1)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x04)
		// br      %r1
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0xf1)
		// basr    %r1,%r0
		ld.Adduint8(ctxt, plt, 0x0d)
		ld.Adduint8(ctxt, plt, 0x10)
		// lgf     %r1,12(%r1)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x0c)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x14)
		// jg .plt
		ld.Adduint8(ctxt, plt, 0xc0)
		ld.Adduint8(ctxt, plt, 0xf4)

		ld.Adduint32(ctxt, plt, uint32(-((plt.Size - 2) >> 1))) // roll-your-own relocation
		//.plt index
		ld.Adduint32(ctxt, plt, uint32(rela.Size)) // rela size before current entry

		// rela
		ld.Addaddrplus(ctxt, rela, got, got.Size-8)

		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_390_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)

		s.Plt = int32(plt.Size - 32)

	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}