func testPut() roachpb.BatchRequest {
var ba roachpb.BatchRequest
ba.Timestamp = testTS
put := &roachpb.PutRequest{}
put.Key = testKey
ba.Add(put)
return ba
}
// process iterates through all keys in a replica's range, calling the garbage
// collector for each key and associated set of values. GC'd keys are batched
// into GC calls. Extant intents are resolved if intents are older than
// intentAgeThreshold. The transaction and abort cache records are also
// scanned and old entries evicted. During normal operation, both of these
// records are cleaned up when their respective transaction finishes, so the
// amount of work done here is expected to be small.
//
// Some care needs to be taken to avoid cyclic recreation of entries during GC:
// * a Push initiated due to an intent may recreate a transaction entry
// * resolving an intent may write a new abort cache entry
// * obtaining the transaction for a abort cache entry requires a Push
//
// The following order is taken below:
// 1) collect all intents with sufficiently old txn record
// 2) collect these intents' transactions
// 3) scan the transaction table, collecting abandoned or completed txns
// 4) push all of these transactions (possibly recreating entries)
// 5) resolve all intents (unless the txn is still PENDING), which will recreate
// abort cache entries (but with the txn timestamp; i.e. likely gc'able)
// 6) scan the abort cache table for old entries
// 7) push these transactions (again, recreating txn entries).
// 8) send a GCRequest.
func (gcq *gcQueue) process(
ctx context.Context, now hlc.Timestamp, repl *Replica, sysCfg config.SystemConfig,
) error {
snap := repl.store.Engine().NewSnapshot()
desc := repl.Desc()
defer snap.Close()
// Lookup the GC policy for the zone containing this key range.
zone, err := sysCfg.GetZoneConfigForKey(desc.StartKey)
if err != nil {
return errors.Errorf("could not find zone config for range %s: %s", repl, err)
}
gcKeys, info, err := RunGC(ctx, desc, snap, now, zone.GC,
func(now hlc.Timestamp, txn *roachpb.Transaction, typ roachpb.PushTxnType) {
pushTxn(ctx, gcq.store.DB(), now, txn, typ)
},
func(intents []roachpb.Intent, poison bool, wait bool) error {
return repl.store.intentResolver.resolveIntents(ctx, intents, poison, wait)
})
if err != nil {
return err
}
log.VEventf(ctx, 1, "completed with stats %+v", info)
info.updateMetrics(gcq.store.metrics)
var ba roachpb.BatchRequest
var gcArgs roachpb.GCRequest
// TODO(tschottdorf): This is one of these instances in which we want
// to be more careful that the request ends up on the correct Replica,
// and we might have to worry about mixing range-local and global keys
// in a batch which might end up spanning Ranges by the time it executes.
gcArgs.Key = desc.StartKey.AsRawKey()
gcArgs.EndKey = desc.EndKey.AsRawKey()
gcArgs.Keys = gcKeys
gcArgs.Threshold = info.Threshold
gcArgs.TxnSpanGCThreshold = info.TxnSpanGCThreshold
// Technically not needed since we're talking directly to the Range.
ba.RangeID = desc.RangeID
ba.Timestamp = now
ba.Add(&gcArgs)
if _, pErr := repl.Send(ctx, ba); pErr != nil {
log.ErrEvent(ctx, pErr.String())
return pErr.GoError()
}
return nil
}
// InitOrJoinRequest executes a RequestLease command asynchronously and returns a
// channel on which the result will be posted. If there's already a request in
// progress, we join in waiting for the results of that request.
// It is an error to call InitOrJoinRequest() while a request is in progress
// naming another replica as lease holder.
//
// replica is used to schedule and execute async work (proposing a RequestLease
// command). replica.mu is locked when delivering results, so calls from the
// replica happen either before or after a result for a pending request has
// happened.
//
// transfer needs to be set if the request represents a lease transfer (as
// opposed to an extension, or acquiring the lease when none is held).
//
// Note: Once this function gets a context to be used for cancellation, instead
// of replica.store.Stopper().ShouldQuiesce(), care will be needed for cancelling
// the Raft command, similar to replica.addWriteCmd.
func (p *pendingLeaseRequest) InitOrJoinRequest(
replica *Replica,
nextLeaseHolder roachpb.ReplicaDescriptor,
timestamp hlc.Timestamp,
startKey roachpb.Key,
transfer bool,
) <-chan *roachpb.Error {
if nextLease, ok := p.RequestPending(); ok {
if nextLease.Replica.ReplicaID == nextLeaseHolder.ReplicaID {
// Join a pending request asking for the same replica to become lease
// holder.
return p.JoinRequest()
}
llChan := make(chan *roachpb.Error, 1)
// We can't join the request in progress.
llChan <- roachpb.NewErrorf("request for different replica in progress "+
"(requesting: %+v, in progress: %+v)",
nextLeaseHolder.ReplicaID, nextLease.Replica.ReplicaID)
return llChan
}
llChan := make(chan *roachpb.Error, 1)
// No request in progress. Let's propose a Lease command asynchronously.
// TODO(tschottdorf): get duration from configuration, either as a
// config flag or, later, dynamically adjusted.
startStasis := timestamp.Add(int64(replica.store.cfg.RangeLeaseActiveDuration), 0)
expiration := startStasis.Add(int64(replica.store.Clock().MaxOffset()), 0)
reqSpan := roachpb.Span{
Key: startKey,
}
var leaseReq roachpb.Request
now := replica.store.Clock().Now()
reqLease := roachpb.Lease{
Start: timestamp,
StartStasis: startStasis,
Expiration: expiration,
Replica: nextLeaseHolder,
ProposedTS: &now,
}
if transfer {
leaseReq = &roachpb.TransferLeaseRequest{
Span: reqSpan,
Lease: reqLease,
}
} else {
leaseReq = &roachpb.RequestLeaseRequest{
Span: reqSpan,
Lease: reqLease,
}
}
if replica.store.Stopper().RunAsyncTask(context.TODO(), func(ctx context.Context) {
ctx = replica.AnnotateCtx(ctx)
// Propose a RequestLease command and wait for it to apply.
ba := roachpb.BatchRequest{}
ba.Timestamp = replica.store.Clock().Now()
ba.RangeID = replica.RangeID
ba.Add(leaseReq)
if log.V(2) {
log.Infof(ctx, "sending lease request %v", leaseReq)
}
_, pErr := replica.Send(ctx, ba)
// We reset our state below regardless of whether we've gotten an error or
// not, but note that an error is ambiguous - there's no guarantee that the
// transfer will not still apply. That's OK, however, as the "in transfer"
// state maintained by the pendingLeaseRequest is not relied on for
// correctness (see replica.mu.minLeaseProposedTS), and resetting the state
// is beneficial as it'll allow the replica to attempt to transfer again or
// extend the existing lease in the future.
// Send result of lease to all waiter channels.
replica.mu.Lock()
defer replica.mu.Unlock()
for _, llChan := range p.llChans {
// Don't send the same transaction object twice; this can lead to races.
if pErr != nil {
pErrClone := *pErr
pErrClone.SetTxn(pErr.GetTxn())
llChan <- &pErrClone
} else {
llChan <- nil
}
}
p.llChans = p.llChans[:0]
p.nextLease = roachpb.Lease{}
}) != nil {
// We failed to start the asynchronous task. Send a blank NotLeaseHolderError
// back to indicate that we have no idea who the range lease holder might
// be; we've withdrawn from active duty.
llChan <- roachpb.NewError(
newNotLeaseHolderError(nil, replica.store.StoreID(), replica.mu.state.Desc))
return llChan
}
p.llChans = append(p.llChans, llChan)
p.nextLease = reqLease
return llChan
}
// InitOrJoinRequest executes a RequestLease command asynchronously and returns a
// channel on which the result will be posted. If there's already a request in
// progress, we join in waiting for the results of that request.
// It is an error to call InitOrJoinRequest() while a request is in progress
// naming another replica as lease holder.
//
// replica is used to schedule and execute async work (proposing a RequestLease
// command). replica.mu is locked when delivering results, so calls from the
// replica happen either before or after a result for a pending request has
// happened.
//
// transfer needs to be set if the request represents a lease transfer (as
// opposed to an extension, or acquiring the lease when none is held).
//
// Note: Once this function gets a context to be used for cancellation, instead
// of replica.store.Stopper().ShouldQuiesce(), care will be needed for cancelling
// the Raft command, similar to replica.addWriteCmd.
func (p *pendingLeaseRequest) InitOrJoinRequest(
replica *Replica,
nextLeaseHolder roachpb.ReplicaDescriptor,
timestamp hlc.Timestamp,
startKey roachpb.Key,
transfer bool,
) <-chan *roachpb.Error {
if nextLease, ok := p.RequestPending(); ok {
if nextLease.Replica.ReplicaID == nextLeaseHolder.ReplicaID {
// Join a pending request asking for the same replica to become lease
// holder.
return p.JoinRequest()
}
llChan := make(chan *roachpb.Error, 1)
// We can't join the request in progress.
llChan <- roachpb.NewErrorf("request for different replica in progress "+
"(requesting: %+v, in progress: %+v)",
nextLeaseHolder.ReplicaID, nextLease.Replica.ReplicaID)
return llChan
}
llChan := make(chan *roachpb.Error, 1)
// No request in progress. Let's propose a Lease command asynchronously.
// TODO(tschottdorf): get duration from configuration, either as a
// config flag or, later, dynamically adjusted.
startStasis := timestamp.Add(int64(replica.store.cfg.RangeLeaseActiveDuration), 0)
expiration := startStasis.Add(int64(replica.store.Clock().MaxOffset()), 0)
reqSpan := roachpb.Span{
Key: startKey,
}
var leaseReq roachpb.Request
reqLease := roachpb.Lease{
Start: timestamp,
StartStasis: startStasis,
Expiration: expiration,
Replica: nextLeaseHolder,
}
if transfer {
leaseReq = &roachpb.TransferLeaseRequest{
Span: reqSpan,
Lease: reqLease,
}
} else {
leaseReq = &roachpb.RequestLeaseRequest{
Span: reqSpan,
Lease: reqLease,
}
}
if replica.store.Stopper().RunAsyncTask(context.TODO(), func(ctx context.Context) {
ctx = replica.AnnotateCtx(ctx)
// Propose a RequestLease command and wait for it to apply.
ba := roachpb.BatchRequest{}
ba.Timestamp = replica.store.Clock().Now()
ba.RangeID = replica.RangeID
ba.Add(leaseReq)
if log.V(2) {
log.Infof(ctx, "sending lease request %v", leaseReq)
}
_, pErr := replica.Send(ctx, ba)
// Send result of lease to all waiter channels.
replica.mu.Lock()
defer replica.mu.Unlock()
for i, llChan := range p.llChans {
// Don't send the same pErr object twice; this can lead to races. We could
// clone every time but it's more efficient to send pErr itself to one of
// the channels (the last one; if we send it earlier the race can still
// happen).
if i == len(p.llChans)-1 {
llChan <- pErr
} else {
llChan <- protoutil.Clone(pErr).(*roachpb.Error) // works with `nil`
}
}
p.llChans = p.llChans[:0]
p.nextLease = roachpb.Lease{}
}) != nil {
// We failed to start the asynchronous task. Send a blank NotLeaseHolderError
// back to indicate that we have no idea who the range lease holder might
// be; we've withdrawn from active duty.
llChan <- roachpb.NewError(
newNotLeaseHolderError(nil, replica.store.StoreID(), replica.mu.state.Desc))
return llChan
}
p.llChans = append(p.llChans, llChan)
p.nextLease = reqLease
return llChan
}
// initAndVerifyBatch initializes timestamp-related information and
// verifies batch constraints before splitting.
func (ds *DistSender) initAndVerifyBatch(
ctx context.Context, ba *roachpb.BatchRequest,
) *roachpb.Error {
// In the event that timestamp isn't set and read consistency isn't
// required, set the timestamp using the local clock.
if ba.ReadConsistency == roachpb.INCONSISTENT && ba.Timestamp.Equal(hlc.ZeroTimestamp) {
ba.Timestamp = ds.clock.Now()
}
if ba.Txn != nil {
// Make a copy here since the code below modifies it in different places.
// TODO(tschottdorf): be smarter about this - no need to do it for
// requests that don't get split.
txnClone := ba.Txn.Clone()
ba.Txn = &txnClone
if len(ba.Txn.ObservedTimestamps) == 0 {
// Ensure the local NodeID is marked as free from clock offset;
// the transaction's timestamp was taken off the local clock.
if nDesc := ds.getNodeDescriptor(); nDesc != nil {
// TODO(tschottdorf): future refactoring should move this to txn
// creation in TxnCoordSender, which is currently unaware of the
// NodeID (and wraps *DistSender through client.Sender since it
// also needs test compatibility with *LocalSender).
//
// Taking care below to not modify any memory referenced from
// our BatchRequest which may be shared with others.
//
// We already have a clone of our txn (see above), so we can
// modify it freely.
//
// Zero the existing data. That makes sure that if we had
// something of size zero but with capacity, we don't re-use the
// existing space (which others may also use). This is just to
// satisfy paranoia/OCD and not expected to matter in practice.
ba.Txn.ResetObservedTimestamps()
// OrigTimestamp is the HLC timestamp at which the Txn started, so
// this effectively means no more uncertainty on this node.
ba.Txn.UpdateObservedTimestamp(nDesc.NodeID, ba.Txn.OrigTimestamp)
}
}
}
if len(ba.Requests) < 1 {
return roachpb.NewErrorf("empty batch")
}
if ba.MaxSpanRequestKeys != 0 {
// Verify that the batch contains only specific range requests or the
// Begin/EndTransactionRequest. Verify that a batch with a ReverseScan
// only contains ReverseScan range requests.
isReverse := ba.IsReverse()
for _, req := range ba.Requests {
inner := req.GetInner()
switch inner.(type) {
case *roachpb.ScanRequest, *roachpb.DeleteRangeRequest:
// Accepted range requests. All other range requests are still
// not supported.
// TODO(vivek): don't enumerate all range requests.
if isReverse {
return roachpb.NewErrorf("batch with limit contains both forward and reverse scans")
}
case *roachpb.BeginTransactionRequest, *roachpb.EndTransactionRequest, *roachpb.ReverseScanRequest:
continue
default:
return roachpb.NewErrorf("batch with limit contains %T request", inner)
}
}
}
return nil
}
// requestLeaseAsync sends a transfer lease or lease request to the
// specified replica. The request is sent in an async task.
func (p *pendingLeaseRequest) requestLeaseAsync(
repl *Replica,
nextLeaseHolder roachpb.ReplicaDescriptor,
reqLease roachpb.Lease,
status LeaseStatus,
leaseReq roachpb.Request,
) error {
return repl.store.Stopper().RunAsyncTask(context.TODO(), func(ctx context.Context) {
ctx = repl.AnnotateCtx(ctx)
var pErr *roachpb.Error
// If requesting an epoch-based lease & current state is expired,
// potentially heartbeat our own liveness or increment epoch of
// prior owner. Note we only do this if the previous lease was
// epoch-based.
if reqLease.Type() == roachpb.LeaseEpoch && status.state == leaseExpired &&
status.lease.Type() == roachpb.LeaseEpoch {
var err error
// If this replica is previous & next lease holder, manually heartbeat to become live.
if status.lease.OwnedBy(nextLeaseHolder.StoreID) &&
repl.store.StoreID() == nextLeaseHolder.StoreID {
if err = repl.store.cfg.NodeLiveness.Heartbeat(ctx, status.liveness); err != nil {
log.Error(ctx, err)
}
} else if status.liveness.Epoch == *status.lease.Epoch {
// If not owner, increment epoch if necessary to invalidate lease.
if err = repl.store.cfg.NodeLiveness.IncrementEpoch(ctx, status.liveness); err != nil {
log.Error(ctx, err)
}
}
// Set error for propagation to all waiters below.
if err != nil {
pErr = roachpb.NewError(newNotLeaseHolderError(status.lease, repl.store.StoreID(), repl.Desc()))
}
}
// Propose a RequestLease command and wait for it to apply.
if pErr == nil {
ba := roachpb.BatchRequest{}
ba.Timestamp = repl.store.Clock().Now()
ba.RangeID = repl.RangeID
ba.Add(leaseReq)
_, pErr = repl.Send(ctx, ba)
}
// We reset our state below regardless of whether we've gotten an error or
// not, but note that an error is ambiguous - there's no guarantee that the
// transfer will not still apply. That's OK, however, as the "in transfer"
// state maintained by the pendingLeaseRequest is not relied on for
// correctness (see repl.mu.minLeaseProposedTS), and resetting the state
// is beneficial as it'll allow the replica to attempt to transfer again or
// extend the existing lease in the future.
// Send result of lease to all waiter channels.
repl.mu.Lock()
defer repl.mu.Unlock()
for _, llChan := range p.llChans {
// Don't send the same transaction object twice; this can lead to races.
if pErr != nil {
pErrClone := *pErr
pErrClone.SetTxn(pErr.GetTxn())
llChan <- &pErrClone
} else {
llChan <- nil
}
}
p.llChans = p.llChans[:0]
p.nextLease = roachpb.Lease{}
})
}
