func InitDriver(job *engine.Job) engine.Status {
var (
network *net.IPNet
enableIPTables = job.GetenvBool("EnableIptables")
icc = job.GetenvBool("InterContainerCommunication")
ipMasq = job.GetenvBool("EnableIpMasq")
ipForward = job.GetenvBool("EnableIpForward")
bridgeIP = job.Getenv("BridgeIP")
fixedCIDR = job.Getenv("FixedCIDR")
)
if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
defaultBindingIP = net.ParseIP(defaultIP)
}
bridgeIface = job.Getenv("BridgeIface")
usingDefaultBridge := false
if bridgeIface == "" {
usingDefaultBridge = true
bridgeIface = DefaultNetworkBridge
}
addr, err := networkdriver.GetIfaceAddr(bridgeIface)
if err != nil {
// If we're not using the default bridge, fail without trying to create it
if !usingDefaultBridge {
return job.Error(err)
}
// If the bridge interface is not found (or has no address), try to create it and/or add an address
if err := configureBridge(bridgeIP); err != nil {
return job.Error(err)
}
addr, err = networkdriver.GetIfaceAddr(bridgeIface)
if err != nil {
return job.Error(err)
}
network = addr.(*net.IPNet)
} else {
network = addr.(*net.IPNet)
// validate that the bridge ip matches the ip specified by BridgeIP
if bridgeIP != "" {
bip, _, err := net.ParseCIDR(bridgeIP)
if err != nil {
return job.Error(err)
}
if !network.IP.Equal(bip) {
return job.Errorf("bridge ip (%s) does not match existing bridge configuration %s", network.IP, bip)
}
}
}
// Configure iptables for link support
if enableIPTables {
if err := setupIPTables(addr, icc, ipMasq); err != nil {
return job.Error(err)
}
}
if ipForward {
// Enable IPv4 forwarding
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
job.Logf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
}
}
// We can always try removing the iptables
if err := iptables.RemoveExistingChain("DOCKER"); err != nil {
return job.Error(err)
}
if enableIPTables {
chain, err := iptables.NewChain("DOCKER", bridgeIface)
if err != nil {
return job.Error(err)
}
portmapper.SetIptablesChain(chain)
}
bridgeNetwork = network
if fixedCIDR != "" {
_, subnet, err := net.ParseCIDR(fixedCIDR)
if err != nil {
return job.Error(err)
}
log.Debugf("Subnet: %v", subnet)
if err := ipallocator.RegisterSubnet(bridgeNetwork, subnet); err != nil {
return job.Error(err)
}
}
// https://github.com/docker/docker/issues/2768
job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeNetwork.IP)
for name, f := range map[string]engine.Handler{
"allocate_interface": Allocate,
"release_interface": Release,
"allocate_port": AllocatePort,
"link": LinkContainers,
} {
if err := job.Eng.Register(name, f); err != nil {
return job.Error(err)
}
}
return engine.StatusOK
}
func InitDriver(job *engine.Job) engine.Status {
var (
networkv4 *net.IPNet
networkv6 *net.IPNet
addrv4 net.Addr
addrsv6 []net.Addr
enableIPTables = job.GetenvBool("EnableIptables")
enableIPv6 = job.GetenvBool("EnableIPv6")
icc = job.GetenvBool("InterContainerCommunication")
ipMasq = job.GetenvBool("EnableIpMasq")
ipForward = job.GetenvBool("EnableIpForward")
bridgeIP = job.Getenv("BridgeIP")
bridgeIPv6 = "fe80::1/64"
fixedCIDR = job.Getenv("FixedCIDR")
fixedCIDRv6 = job.Getenv("FixedCIDRv6")
)
if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
defaultBindingIP = net.ParseIP(defaultIP)
}
bridgeIface = job.Getenv("BridgeIface")
usingDefaultBridge := false
if bridgeIface == "" {
usingDefaultBridge = true
bridgeIface = DefaultNetworkBridge
}
addrv4, addrsv6, err := networkdriver.GetIfaceAddr(bridgeIface)
if err != nil {
// No Bridge existent. Create one
// If we're not using the default bridge, fail without trying to create it
if !usingDefaultBridge {
return job.Error(err)
}
// If the iface is not found, try to create it
if err := configureBridge(bridgeIP, bridgeIPv6, enableIPv6); err != nil {
return job.Error(err)
}
addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
if err != nil {
return job.Error(err)
}
if fixedCIDRv6 != "" {
// Setting route to global IPv6 subnet
log.Infof("Adding route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
if err := netlink.AddRoute(fixedCIDRv6, "", "", bridgeIface); err != nil {
log.Fatalf("Could not add route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
}
}
} else {
// Bridge exists already. Getting info...
// validate that the bridge ip matches the ip specified by BridgeIP
if bridgeIP != "" {
networkv4 = addrv4.(*net.IPNet)
bip, _, err := net.ParseCIDR(bridgeIP)
if err != nil {
return job.Error(err)
}
if !networkv4.IP.Equal(bip) {
return job.Errorf("bridge ip (%s) does not match existing bridge configuration %s", networkv4.IP, bip)
}
}
// a bridge might exist but not have any IPv6 addr associated with it yet
// (for example, an existing Docker installation that has only been used
// with IPv4 and docker0 already is set up) In that case, we can perform
// the bridge init for IPv6 here, else we will error out below if --ipv6=true
if len(addrsv6) == 0 && enableIPv6 {
if err := setupIPv6Bridge(bridgeIPv6); err != nil {
return job.Error(err)
}
// recheck addresses now that IPv6 is setup on the bridge
addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
if err != nil {
return job.Error(err)
}
}
// TODO: Check if route to fixedCIDRv6 is set
}
if enableIPv6 {
bip6, _, err := net.ParseCIDR(bridgeIPv6)
if err != nil {
return job.Error(err)
}
found := false
for _, addrv6 := range addrsv6 {
networkv6 = addrv6.(*net.IPNet)
if networkv6.IP.Equal(bip6) {
found = true
break
}
}
if !found {
return job.Errorf("bridge IPv6 does not match existing bridge configuration %s", bip6)
}
}
networkv4 = addrv4.(*net.IPNet)
log.Infof("enableIPv6 = %t", enableIPv6)
if enableIPv6 {
if len(addrsv6) == 0 {
return job.Error(errors.New("IPv6 enabled but no IPv6 detected"))
}
bridgeIPv6Addr = networkv6.IP
}
// Configure iptables for link support
if enableIPTables {
if err := setupIPTables(addrv4, icc, ipMasq); err != nil {
return job.Error(err)
}
}
if ipForward {
// Enable IPv4 forwarding
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
job.Logf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
}
if fixedCIDRv6 != "" {
// Enable IPv6 forwarding
if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/default/forwarding", []byte{'1', '\n'}, 0644); err != nil {
job.Logf("WARNING: unable to enable IPv6 default forwarding: %s\n", err)
}
if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/all/forwarding", []byte{'1', '\n'}, 0644); err != nil {
job.Logf("WARNING: unable to enable IPv6 all forwarding: %s\n", err)
}
}
}
// We can always try removing the iptables
if err := iptables.RemoveExistingChain("DOCKER", iptables.Nat); err != nil {
return job.Error(err)
}
if enableIPTables {
_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Nat)
if err != nil {
return job.Error(err)
}
chain, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
if err != nil {
return job.Error(err)
}
portmapper.SetIptablesChain(chain)
}
bridgeIPv4Network = networkv4
if fixedCIDR != "" {
_, subnet, err := net.ParseCIDR(fixedCIDR)
if err != nil {
return job.Error(err)
}
log.Debugf("Subnet: %v", subnet)
if err := ipallocator.RegisterSubnet(bridgeIPv4Network, subnet); err != nil {
return job.Error(err)
}
}
if fixedCIDRv6 != "" {
_, subnet, err := net.ParseCIDR(fixedCIDRv6)
if err != nil {
return job.Error(err)
}
log.Debugf("Subnet: %v", subnet)
if err := ipallocator.RegisterSubnet(subnet, subnet); err != nil {
return job.Error(err)
}
globalIPv6Network = subnet
}
// Block BridgeIP in IP allocator
ipallocator.RequestIP(bridgeIPv4Network, bridgeIPv4Network.IP)
// https://github.com/docker/docker/issues/2768
job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeIPv4Network.IP)
for name, f := range map[string]engine.Handler{
"allocate_interface": Allocate,
"release_interface": Release,
"allocate_port": AllocatePort,
"link": LinkContainers,
} {
if err := job.Eng.Register(name, f); err != nil {
return job.Error(err)
}
}
return engine.StatusOK
}
