func TestSensorObserve(t *testing.T) {
cmd1, _ := commands.NewCommand("./testdata/test.sh doStuff --debug", "1s")
sensor := &Sensor{checkCmd: cmd1}
if val, err := sensor.observe(); err != nil {
t.Fatalf("Unexpected error from sensor check: %s", err)
} else if val != "Running doStuff with args: --debug\n" {
t.Fatalf("Unexpected output from sensor check: %s", val)
}
// Ensure we can run it more than once
if _, err := sensor.observe(); err != nil {
t.Fatalf("Unexpected error from sensor check (x2): %s", err)
}
// Ensure bad commands return error
cmd2, _ := commands.NewCommand("./testdata/doesNotExist.sh", "0")
sensor = &Sensor{checkCmd: cmd2}
if val, err := sensor.observe(); err == nil {
t.Fatalf("Expected error from sensor check but got %s", val)
} else if err.Error() != "fork/exec ./testdata/doesNotExist.sh: no such file or directory" {
t.Fatalf("Unexpected error from invalid sensor check: %s", err)
}
}
// NewBackends creates a new backend from a raw config structure
func NewBackends(raw []interface{}, disc discovery.ServiceBackend) ([]*Backend, error) {
if raw == nil {
return []*Backend{}, nil
}
var backends []*Backend
if err := utils.DecodeRaw(raw, &backends); err != nil {
return nil, fmt.Errorf("Backend configuration error: %v", err)
}
for _, b := range backends {
if err := utils.ValidateServiceName(b.Name); err != nil {
return nil, err
}
if b.OnChangeExec == nil {
return nil, fmt.Errorf("`onChange` is required in backend %s",
b.Name)
}
cmd, err := commands.NewCommand(b.OnChangeExec, b.Timeout)
if err != nil {
return nil, fmt.Errorf("Could not parse `onChange` in backend %s: %s",
b.Name, err)
}
cmd.Name = fmt.Sprintf("%s.health", b.Name)
b.onChangeCmd = cmd
if b.Poll < 1 {
return nil, fmt.Errorf("`poll` must be > 0 in backend %s",
b.Name)
}
b.onChangeCmd = cmd
b.discoveryService = disc
}
return backends, nil
}
func parseTask(task *Task) error {
if task.Command == nil {
return fmt.Errorf("Task did not provide a command")
}
freq, err := utils.ParseDuration(task.Frequency)
if err != nil {
return fmt.Errorf("Unable to parse frequency %s: %v", task.Frequency, err)
}
if freq < time.Millisecond {
return fmt.Errorf("Frequency %v cannot be less that %v", freq, taskMinDuration)
}
task.freqDuration = freq
if task.Timeout == "" {
task.Timeout = task.Frequency
}
cmd, err := commands.NewCommand(task.Command, task.Timeout)
if cmd.TimeoutDuration < taskMinDuration {
return fmt.Errorf("Timeout %v cannot be less that %v", cmd.TimeoutDuration, taskMinDuration)
}
cmd.Name = fmt.Sprintf("task[%s]", task.Name)
task.cmd = cmd
return nil
}
func TestHealthCheckBad(t *testing.T) {
cmd1, _ := commands.NewCommand("./testdata/test.sh failStuff", "")
service := &Service{
healthCheckCmd: cmd1,
}
if err := service.CheckHealth(); err == nil {
t.Errorf("Expected error from CheckHealth but got nil")
}
}
// NewSensors creates new sensors from a raw config
func NewSensors(raw []interface{}) ([]*Sensor, error) {
var sensors []*Sensor
if err := utils.DecodeRaw(raw, &sensors); err != nil {
return nil, fmt.Errorf("Sensor configuration error: %v", err)
}
for _, s := range sensors {
check, err := commands.NewCommand(s.CheckExec, s.Timeout)
if err != nil {
return nil, fmt.Errorf("could not parse check in sensor %s: %s", s.Name, err)
}
check.Name = fmt.Sprintf("%s.sensor", s.Name)
s.checkCmd = check
// the prometheus client lib's API here is baffling... they don't expose
// an interface or embed their Opts type in each of the Opts "subtypes",
// so we can't share the initialization.
switch {
case s.Type == "counter":
s.collector = prometheus.NewCounter(prometheus.CounterOpts{
Namespace: s.Namespace,
Subsystem: s.Subsystem,
Name: s.Name,
Help: s.Help,
})
case s.Type == "gauge":
s.collector = prometheus.NewGauge(prometheus.GaugeOpts{
Namespace: s.Namespace,
Subsystem: s.Subsystem,
Name: s.Name,
Help: s.Help,
})
case s.Type == "histogram":
s.collector = prometheus.NewHistogram(prometheus.HistogramOpts{
Namespace: s.Namespace,
Subsystem: s.Subsystem,
Name: s.Name,
Help: s.Help,
})
case s.Type == "summary":
s.collector = prometheus.NewSummary(prometheus.SummaryOpts{
Namespace: s.Namespace,
Subsystem: s.Subsystem,
Name: s.Name,
Help: s.Help,
})
default:
return nil, fmt.Errorf("invalid sensor type: %s", s.Type)
}
// we're going to unregister before every attempt to register
// so that we can reload config
prometheus.Unregister(s.collector)
if err := prometheus.Register(s.collector); err != nil {
return nil, err
}
}
return sensors, nil
}
func getSignalTestConfig() *App {
service, _ := services.NewService(
"test-service", 1, 1, 1, nil, nil, nil, &NoopServiceBackend{})
app := EmptyApp()
cmd, _ := commands.NewCommand([]string{
"./testdata/test.sh",
"interruptSleep"}, "0")
app.Command = cmd
app.StopTimeout = 5
app.Services = []*services.Service{service}
return app
}
func TestHealthCheck(t *testing.T) {
cmd1, _ := commands.NewCommand("./testdata/test.sh doStuff --debug", "1s")
service := &Service{
healthCheckCmd: cmd1,
}
if err := service.CheckHealth(); err != nil {
t.Errorf("Unexpected error CheckHealth: %s", err)
}
// Ensure we can run it more than once
if err := service.CheckHealth(); err != nil {
t.Errorf("Unexpected error CheckHealth (x2): %s", err)
}
}
func TestOnChangeCmd(t *testing.T) {
cmd1, _ := commands.NewCommand("./testdata/test.sh doStuff --debug", "1s")
backend := &Backend{
onChangeCmd: cmd1,
}
if err := backend.OnChange(); err != nil {
t.Errorf("Unexpected error OnChange: %s", err)
}
// Ensure we can run it more than once
if err := backend.OnChange(); err != nil {
t.Errorf("Unexpected error OnChange (x2): %s", err)
}
}
// Run starts the application and blocks until finished
func (a *App) Run() {
// Set up handlers for polling and to accept signal interrupts
if 1 == os.Getpid() {
reapChildren()
}
args := getArgs(flag.Args())
cmd, err := commands.NewCommand(args, "0")
if err != nil {
log.Errorf("Unable to parse command arguments: %v", err)
}
cmd.Name = "APP"
a.Command = cmd
a.handleSignals()
if a.PreStartCmd != nil {
// Run the preStart handler, if any, and exit if it returns an error
fields := log.Fields{"process": "PreStart"}
if code, err := commands.RunAndWait(a.PreStartCmd, fields); err != nil {
os.Exit(code)
}
}
a.handleCoprocesses()
a.handlePolling()
if a.Command != nil {
// Run our main application and capture its stdout/stderr.
// This will block until the main application exits and then os.Exit
// with the exit code of that application.
code, err := commands.RunAndWait(a.Command, nil)
if err != nil {
log.Println(err)
}
// Run the PostStop handler, if any, and exit if it returns an error
if a.PostStopCmd != nil {
fields := log.Fields{"process": "PostStop"}
if postStopCode, err := commands.RunAndWait(a.PostStopCmd, fields); err != nil {
os.Exit(postStopCode)
}
}
os.Exit(code)
}
// block forever, as we're polling in the two polling functions and
// did not os.Exit by waiting on an external application.
select {}
}
func parseCoprocess(coprocess *Coprocess) error {
if coprocess.Command == nil {
return fmt.Errorf("Coprocess did not provide a command")
}
cmd, err := commands.NewCommand(coprocess.Command, "0")
if err != nil {
return fmt.Errorf("Could not parse `coprocess` command %s: %s",
coprocess.Name, err)
}
if coprocess.Name == "" {
args := append([]string{cmd.Exec}, cmd.Args...)
coprocess.Name = strings.Join(args, " ")
}
cmd.Name = fmt.Sprintf("coprocess[%s]", coprocess.Name)
coprocess.cmd = cmd
return parseCoprocessRestarts(coprocess)
}
func TestSensorPollAction(t *testing.T) {
testServer := httptest.NewServer(prometheus.UninstrumentedHandler())
defer testServer.Close()
cmd, _ := commands.NewCommand("./testdata/test.sh measureStuff", "0")
sensor := &Sensor{
Type: "counter",
checkCmd: cmd,
collector: prometheus.NewCounter(prometheus.CounterOpts{
Namespace: "telemetry",
Subsystem: "sensors",
Name: "TestSensorPollAction",
Help: "help",
})}
prometheus.MustRegister(sensor.collector)
sensor.PollAction()
resp := getFromTestServer(t, testServer)
if strings.Count(resp, "telemetry_sensors_TestSensorPollAction 42") != 1 {
t.Fatalf("Failed to get match for sensor in response: %s", resp)
}
}
func parseService(s *Service, disc discovery.ServiceBackend) error {
if err := utils.ValidateServiceName(s.Name); err != nil {
return err
}
hostname, _ := os.Hostname()
s.ID = fmt.Sprintf("%s-%s", s.Name, hostname)
s.discoveryService = disc
if s.Poll < 1 {
return fmt.Errorf("`poll` must be > 0 in service %s", s.Name)
}
if s.TTL < 1 {
return fmt.Errorf("`ttl` must be > 0 in service %s", s.Name)
}
if s.Port < 1 {
return fmt.Errorf("`port` must be > 0 in service %s", s.Name)
}
// if the HealthCheckExec is nil then we'll have no health check
// command; this is useful for the telemetry service
if s.HealthCheckExec != nil {
cmd, err := commands.NewCommand(s.HealthCheckExec, s.Timeout)
if err != nil {
return fmt.Errorf("Could not parse `health` in service %s: %s", s.Name, err)
}
cmd.Name = fmt.Sprintf("%s.health", s.Name)
s.healthCheckCmd = cmd
}
interfaces, ifaceErr := utils.ToStringArray(s.Interfaces)
if ifaceErr != nil {
return ifaceErr
}
ipAddress, err := utils.GetIP(interfaces)
if err != nil {
return err
}
s.IPAddress = ipAddress
var consulExtras *discovery.ConsulExtras
if s.ConsulConfig != nil {
if s.ConsulConfig.DeregisterCriticalServiceAfter != "" {
if _, err := time.ParseDuration(s.ConsulConfig.DeregisterCriticalServiceAfter); err != nil {
return fmt.Errorf("Could not parse consul `deregisterCriticalServiceAfter` in service %s: %s", s.Name, err)
}
}
consulExtras = &discovery.ConsulExtras{
DeregisterCriticalServiceAfter: s.ConsulConfig.DeregisterCriticalServiceAfter,
EnableTagOverride: s.ConsulConfig.EnableTagOverride,
}
}
s.definition = &discovery.ServiceDefinition{
ID: s.ID,
Name: s.Name,
Port: s.Port,
TTL: s.TTL,
Tags: s.Tags,
IPAddress: s.IPAddress,
ConsulExtras: consulExtras,
}
return nil
}
func TestSensorBadRecord(t *testing.T) {
cmd, _ := commands.NewCommand("./testdata/test.sh doStuff --debug", "0")
sensor := &Sensor{checkCmd: cmd}
sensor.PollAction() // logs but no crash
}
func TestSensorBadPollAction(t *testing.T) {
cmd, _ := commands.NewCommand("./testdata/doesNotExist.sh", "0")
sensor := &Sensor{checkCmd: cmd}
sensor.PollAction() // logs but no crash
}
