// parsePkTuple parese one pk tuple.
func parsePkTuple(tokenizer *sqlparser.Tokenizer) (tuple sqlparser.ValTuple, err error) {
// start scanning the list
for typ, val := tokenizer.Scan(); typ != ')'; typ, val = tokenizer.Scan() {
switch typ {
case '-':
// handle negative numbers
typ2, val2 := tokenizer.Scan()
if typ2 != sqlparser.NUMBER {
return nil, fmt.Errorf("expecing number after '-'")
}
num := append(sqlparser.NumVal("-"), val2...)
tuple = append(tuple, num)
case sqlparser.NUMBER:
tuple = append(tuple, sqlparser.NumVal(val))
case sqlparser.NULL:
tuple = append(tuple, new(sqlparser.NullVal))
case sqlparser.STRING:
decoded := make([]byte, base64.StdEncoding.DecodedLen(len(val)))
numDecoded, err := base64.StdEncoding.Decode(decoded, val)
if err != nil {
return nil, err
}
tuple = append(tuple, sqlparser.StrVal(decoded[:numDecoded]))
default:
return nil, fmt.Errorf("syntax error at position: %d", tokenizer.Position)
}
}
return tuple, nil
}
// getWhereClause returns a whereClause based on desired upper and lower
// bounds for primary key.
func (qs *QuerySplitter) getWhereClause(start, end sqltypes.Value) *sqlparser.Where {
var startClause *sqlparser.ComparisonExpr
var endClause *sqlparser.ComparisonExpr
var clauses sqlparser.BoolExpr
// No upper or lower bound, just return the where clause of original query
if start.IsNull() && end.IsNull() {
return qs.sel.Where
}
pk := &sqlparser.ColName{
Name: []byte(qs.splitColumn),
}
// splitColumn >= start
if !start.IsNull() {
startClause = &sqlparser.ComparisonExpr{
Operator: sqlparser.AST_GE,
Left: pk,
Right: sqlparser.NumVal((start).Raw()),
}
}
// splitColumn < end
if !end.IsNull() {
endClause = &sqlparser.ComparisonExpr{
Operator: sqlparser.AST_LT,
Left: pk,
Right: sqlparser.NumVal((end).Raw()),
}
}
if startClause == nil {
clauses = endClause
} else {
if endClause == nil {
clauses = startClause
} else {
// splitColumn >= start AND splitColumn < end
clauses = &sqlparser.AndExpr{
Left: startClause,
Right: endClause,
}
}
}
if qs.sel.Where != nil {
clauses = &sqlparser.AndExpr{
Left: qs.sel.Where.Expr,
Right: clauses,
}
}
return &sqlparser.Where{
Type: sqlparser.AST_WHERE,
Expr: clauses,
}
}
// pushOrderBy pushes the order by clause to the appropriate routes.
// In the case of a join, this is allowed only if the order by columns
// match the join order. Otherwise, it's an error.
// If column numbers were used to reference the columns, those numbers
// are readjusted on push-down to match the numbers of the individual
// queries.
func pushOrderBy(orderBy sqlparser.OrderBy, bldr builder) error {
if orderBy == nil {
return nil
}
routeNumber := 0
for _, order := range orderBy {
// Only generator is allowed to change the AST.
// If we have to change the order by expression,
// we have to build a new node.
pushOrder := order
var rb *route
switch node := order.Expr.(type) {
case *sqlparser.ColName:
var isLocal bool
var err error
rb, isLocal, err = bldr.Symtab().Find(node, true)
if err != nil {
return err
}
if !isLocal {
return errors.New("unsupported: subquery references outer query in order by")
}
case sqlparser.NumVal:
num, err := strconv.ParseInt(string(node), 0, 64)
if err != nil {
return fmt.Errorf("error parsing order by clause: %s", string(node))
}
if num < 1 || num > int64(len(bldr.Symtab().Colsyms)) {
return errors.New("order by column number out of range")
}
colsym := bldr.Symtab().Colsyms[num-1]
rb = colsym.Route()
// We have to recompute the column number.
for num, s := range rb.Colsyms {
if s == colsym {
pushOrder = &sqlparser.Order{
Expr: sqlparser.NumVal(strconv.AppendInt(nil, int64(num+1), 10)),
Direction: order.Direction,
}
}
}
if pushOrder == order {
panic("unexpected: column not found for order by")
}
default:
return errors.New("unsupported: complex expression in order by")
}
if rb.Order() < routeNumber {
return errors.New("unsupported: complex join and out of sequence order by")
}
if !rb.IsSingle() {
return errors.New("unsupported: scatter and order by")
}
routeNumber = rb.Order()
if err := rb.AddOrder(pushOrder); err != nil {
return err
}
}
return nil
}
func buildLimitClause(offset, rowcount int64) *sqlparser.Limit {
return &sqlparser.Limit{
Offset: sqlparser.NumVal(fmt.Sprintf("%d", offset)),
Rowcount: sqlparser.NumVal(fmt.Sprintf("%d", rowcount)),
}
}
// Wireup performs the wire-up tasks.
func (rb *route) Wireup(bldr builder, jt *jointab) error {
// Resolve values stored in the builder.
var err error
switch vals := rb.ERoute.Values.(type) {
case *sqlparser.ComparisonExpr:
// A comparison expression is stored only if it was an IN clause.
// We have to convert it to use a list argutment and resolve values.
rb.ERoute.Values, err = rb.procureValues(bldr, jt, vals.Right)
if err != nil {
return err
}
vals.Right = sqlparser.ListArg("::" + engine.ListVarName)
default:
rb.ERoute.Values, err = rb.procureValues(bldr, jt, vals)
if err != nil {
return err
}
}
// Fix up the AST.
_ = sqlparser.Walk(func(node sqlparser.SQLNode) (bool, error) {
switch node := node.(type) {
case *sqlparser.Select:
if len(node.SelectExprs) == 0 {
node.SelectExprs = sqlparser.SelectExprs([]sqlparser.SelectExpr{
&sqlparser.NonStarExpr{
Expr: sqlparser.NumVal([]byte{'1'}),
},
})
}
case *sqlparser.ComparisonExpr:
if node.Operator == sqlparser.EqualStr {
if exprIsValue(node.Left, rb) && !exprIsValue(node.Right, rb) {
node.Left, node.Right = node.Right, node.Left
}
}
}
return true, nil
}, &rb.Select)
// Generate query while simultaneously resolving values.
varFormatter := func(buf *sqlparser.TrackedBuffer, node sqlparser.SQLNode) {
switch node := node.(type) {
case *sqlparser.ColName:
if !rb.isLocal(node) {
joinVar := jt.Procure(bldr, node, rb.Order())
rb.ERoute.JoinVars[joinVar] = struct{}{}
buf.Myprintf("%a", ":"+joinVar)
return
}
case *sqlparser.TableName:
node.Name.Format(buf)
return
}
node.Format(buf)
}
buf := sqlparser.NewTrackedBuffer(varFormatter)
varFormatter(buf, &rb.Select)
rb.ERoute.Query = buf.ParsedQuery().Query
rb.ERoute.FieldQuery = rb.generateFieldQuery(&rb.Select, jt)
return nil
}
