// synchronizeReplication phase:
// 1 - ask the subset slave to stop replication
// 2 - sleep for 5 seconds
// 3 - ask the superset slave to stop replication
// Note this is not 100% correct, but good enough for now
func (worker *SQLDiffWorker) synchronizeReplication(ctx context.Context) error {
worker.SetState(WorkerStateSyncReplication)
// stop replication on subset slave
worker.wr.Logger().Infof("Stopping replication on subset slave %v", worker.subset.alias)
subsetTablet, err := worker.wr.TopoServer().GetTablet(ctx, worker.subset.alias)
if err != nil {
return err
}
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
err = worker.wr.TabletManagerClient().StopSlave(shortCtx, subsetTablet)
cancel()
if err != nil {
return fmt.Errorf("Cannot stop slave %v: %v", worker.subset.alias, err)
}
if err := checkDone(ctx); err != nil {
return err
}
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(worker.cleaner, subsetTablet)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(worker.cleaner, worker.subset.alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", worker.subset.alias, err)
}
action.TabletType = topo.TYPE_SPARE
// sleep for a few seconds
time.Sleep(5 * time.Second)
if err := checkDone(ctx); err != nil {
return err
}
// stop replication on superset slave
worker.wr.Logger().Infof("Stopping replication on superset slave %v", worker.superset.alias)
supersetTablet, err := worker.wr.TopoServer().GetTablet(ctx, worker.superset.alias)
if err != nil {
return err
}
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
err = worker.wr.TabletManagerClient().StopSlave(shortCtx, supersetTablet)
cancel()
if err != nil {
return fmt.Errorf("Cannot stop slave %v: %v", worker.superset.alias, err)
}
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(worker.cleaner, supersetTablet)
action, err = wrangler.FindChangeSlaveTypeActionByTarget(worker.cleaner, worker.superset.alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", worker.superset.alias, err)
}
action.TabletType = topo.TYPE_SPARE
return nil
}
// synchronizeReplication phase:
// 1 - ask the subset slave to stop replication
// 2 - sleep for 5 seconds
// 3 - ask the superset slave to stop replication
// Note this is not 100% correct, but good enough for now
func (worker *SQLDiffWorker) synchronizeReplication() error {
worker.setState(SQLDiffSynchronizeReplication)
// stop replication on subset slave
worker.wr.Logger().Infof("Stopping replication on subset slave %v", worker.subset.alias)
subsetTablet, err := worker.wr.TopoServer().GetTablet(worker.subset.alias)
if err != nil {
return err
}
if err := worker.wr.ActionInitiator().StopSlave(subsetTablet, 30*time.Second); err != nil {
return fmt.Errorf("Cannot stop slave %v: %v", worker.subset.alias, err)
}
if worker.CheckInterrupted() {
return topo.ErrInterrupted
}
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(worker.cleaner, worker.subset.alias, 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(worker.cleaner, worker.subset.alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", worker.subset.alias, err)
}
action.TabletType = topo.TYPE_SPARE
// sleep for a few seconds
time.Sleep(5 * time.Second)
if worker.CheckInterrupted() {
return topo.ErrInterrupted
}
// stop replication on superset slave
worker.wr.Logger().Infof("Stopping replication on superset slave %v", worker.superset.alias)
supersetTablet, err := worker.wr.TopoServer().GetTablet(worker.superset.alias)
if err != nil {
return err
}
if err := worker.wr.ActionInitiator().StopSlave(supersetTablet, 30*time.Second); err != nil {
return fmt.Errorf("Cannot stop slave %v: %v", worker.superset.alias, err)
}
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(worker.cleaner, worker.superset.alias, 30*time.Second)
action, err = wrangler.FindChangeSlaveTypeActionByTarget(worker.cleaner, worker.superset.alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", worker.superset.alias, err)
}
action.TabletType = topo.TYPE_SPARE
return nil
}
// findTargets phase:
// - find one rdonly in the source shard
// - mark it as 'worker' pointing back to us
// - get the aliases of all the targets
func (vscw *VerticalSplitCloneWorker) findTargets(ctx context.Context) error {
vscw.setState(WorkerStateFindTargets)
// find an appropriate endpoint in the source shard
var err error
vscw.sourceAlias, err = FindWorkerTablet(ctx, vscw.wr, vscw.cleaner, vscw.cell, vscw.sourceKeyspace, "0")
if err != nil {
return fmt.Errorf("FindWorkerTablet() failed for %v/%v/0: %v", vscw.cell, vscw.sourceKeyspace, err)
}
vscw.wr.Logger().Infof("Using tablet %v as the source", topo.TabletAliasString(vscw.sourceAlias))
// get the tablet info for it
vscw.sourceTablet, err = vscw.wr.TopoServer().GetTablet(ctx, vscw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot read tablet %v: %v", topo.TabletAliasString(vscw.sourceAlias), err)
}
// stop replication on it
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
err = vscw.wr.TabletManagerClient().StopSlave(shortCtx, vscw.sourceTablet)
cancel()
if err != nil {
return fmt.Errorf("cannot stop replication on tablet %v", topo.TabletAliasString(vscw.sourceAlias))
}
wrangler.RecordStartSlaveAction(vscw.cleaner, vscw.sourceTablet)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(vscw.cleaner, vscw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", topo.TabletAliasString(vscw.sourceAlias), err)
}
action.TabletType = pb.TabletType_SPARE
return vscw.ResolveDestinationMasters(ctx)
}
// findTargets phase:
// - find one rdonly in the source shard
// - mark it as 'checker' pointing back to us
// - get the aliases of all the targets
func (vscw *VerticalSplitCloneWorker) findTargets() error {
vscw.setState(stateVSCFindTargets)
// find an appropriate endpoint in the source shard
var err error
vscw.sourceAlias, err = findChecker(vscw.wr, vscw.cleaner, vscw.cell, vscw.sourceKeyspace, "0")
if err != nil {
return fmt.Errorf("cannot find checker for %v/%v/0: %v", vscw.cell, vscw.sourceKeyspace, err)
}
vscw.wr.Logger().Infof("Using tablet %v as the source", vscw.sourceAlias)
// get the tablet info for it
vscw.sourceTablet, err = vscw.wr.TopoServer().GetTablet(vscw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot read tablet %v: %v", vscw.sourceTablet, err)
}
// stop replication on it
if err := vscw.wr.TabletManagerClient().StopSlave(vscw.sourceTablet, 30*time.Second); err != nil {
return fmt.Errorf("cannot stop replication on tablet %v", vscw.sourceAlias)
}
wrangler.RecordStartSlaveAction(vscw.cleaner, vscw.sourceTablet, 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(vscw.cleaner, vscw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", vscw.sourceAlias, err)
}
action.TabletType = topo.TYPE_SPARE
// find all the targets in the destination keyspace / shard
vscw.destinationAliases, err = topo.FindAllTabletAliasesInShard(vscw.wr.TopoServer(), vscw.destinationKeyspace, vscw.destinationShard)
if err != nil {
return fmt.Errorf("cannot find all target tablets in %v/%v: %v", vscw.destinationKeyspace, vscw.destinationShard, err)
}
vscw.wr.Logger().Infof("Found %v target aliases", len(vscw.destinationAliases))
// get the TabletInfo for all targets
vscw.destinationTablets, err = topo.GetTabletMap(vscw.wr.TopoServer(), vscw.destinationAliases)
if err != nil {
return fmt.Errorf("cannot read all target tablets in %v/%v: %v", vscw.destinationKeyspace, vscw.destinationShard, err)
}
// find and validate the master
for tabletAlias, ti := range vscw.destinationTablets {
if ti.Type == topo.TYPE_MASTER {
if vscw.destinationMasterAlias.IsZero() {
vscw.destinationMasterAlias = tabletAlias
} else {
return fmt.Errorf("multiple masters in destination shard: %v and %v at least", vscw.destinationMasterAlias, tabletAlias)
}
}
}
if vscw.destinationMasterAlias.IsZero() {
return fmt.Errorf("no master in destination shard")
}
return nil
}
// findTargets phase:
// - find one rdonly in the source shard
// - mark it as 'worker' pointing back to us
// - get the aliases of all the targets
func (scw *SplitCloneWorker) findTargets(ctx context.Context) error {
scw.setState(WorkerStateFindTargets)
var err error
// find an appropriate endpoint in the source shards
scw.sourceAliases = make([]*pb.TabletAlias, len(scw.sourceShards))
for i, si := range scw.sourceShards {
scw.sourceAliases[i], err = FindWorkerTablet(ctx, scw.wr, scw.cleaner, scw.cell, si.Keyspace(), si.ShardName())
if err != nil {
return fmt.Errorf("FindWorkerTablet() failed for %v/%v/%v: %v", scw.cell, si.Keyspace(), si.ShardName(), err)
}
scw.wr.Logger().Infof("Using tablet %v as source for %v/%v", topoproto.TabletAliasString(scw.sourceAliases[i]), si.Keyspace(), si.ShardName())
}
// get the tablet info for them, and stop their replication
scw.sourceTablets = make([]*topo.TabletInfo, len(scw.sourceAliases))
for i, alias := range scw.sourceAliases {
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
scw.sourceTablets[i], err = scw.wr.TopoServer().GetTablet(shortCtx, alias)
cancel()
if err != nil {
return fmt.Errorf("cannot read tablet %v: %v", topoproto.TabletAliasString(alias), err)
}
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
err := scw.wr.TabletManagerClient().StopSlave(shortCtx, scw.sourceTablets[i])
cancel()
if err != nil {
return fmt.Errorf("cannot stop replication on tablet %v", topoproto.TabletAliasString(alias))
}
wrangler.RecordStartSlaveAction(scw.cleaner, scw.sourceTablets[i])
action, err := wrangler.FindChangeSlaveTypeActionByTarget(scw.cleaner, alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", topoproto.TabletAliasString(alias), err)
}
action.TabletType = pb.TabletType_SPARE
}
return scw.ResolveDestinationMasters(ctx)
}
func (sdw *SplitDiffWorker) synchronizeReplication(ctx context.Context) error {
sdw.SetState(WorkerStateSyncReplication)
masterInfo, err := sdw.wr.TopoServer().GetTablet(ctx, sdw.shardInfo.MasterAlias)
if err != nil {
return fmt.Errorf("synchronizeReplication: cannot get Tablet record for master %v: %v", sdw.shardInfo.MasterAlias, err)
}
// 1 - stop the master binlog replication, get its current position
sdw.wr.Logger().Infof("Stopping master binlog replication on %v", sdw.shardInfo.MasterAlias)
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
blpPositionList, err := sdw.wr.TabletManagerClient().StopBlp(shortCtx, masterInfo)
cancel()
if err != nil {
return fmt.Errorf("StopBlp for %v failed: %v", sdw.shardInfo.MasterAlias, err)
}
wrangler.RecordStartBlpAction(sdw.cleaner, masterInfo)
// 2 - stop all the source tablets at a binlog position
// higher than the destination master
stopPositionList := blproto.BlpPositionList{
Entries: make([]blproto.BlpPosition, len(sdw.shardInfo.SourceShards)),
}
for i, ss := range sdw.shardInfo.SourceShards {
// find where we should be stopping
blpPos, err := blpPositionList.FindBlpPositionById(ss.Uid)
if err != nil {
return fmt.Errorf("no binlog position on the master for Uid %v", ss.Uid)
}
// read the tablet
sourceTablet, err := sdw.wr.TopoServer().GetTablet(ctx, sdw.sourceAliases[i])
if err != nil {
return err
}
// stop replication
sdw.wr.Logger().Infof("Stopping slave[%v] %v at a minimum of %v", i, sdw.sourceAliases[i], blpPos.Position)
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
stoppedAt, err := sdw.wr.TabletManagerClient().StopSlaveMinimum(shortCtx, sourceTablet, blpPos.Position, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("cannot stop slave %v at right binlog position %v: %v", sdw.sourceAliases[i], blpPos.Position, err)
}
stopPositionList.Entries[i].Uid = ss.Uid
stopPositionList.Entries[i].Position = stoppedAt
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(sdw.cleaner, sourceTablet)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(sdw.cleaner, sdw.sourceAliases[i])
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", sdw.sourceAliases[i], err)
}
action.TabletType = pb.TabletType_SPARE
}
// 3 - ask the master of the destination shard to resume filtered
// replication up to the new list of positions
sdw.wr.Logger().Infof("Restarting master %v until it catches up to %v", sdw.shardInfo.MasterAlias, stopPositionList)
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
masterPos, err := sdw.wr.TabletManagerClient().RunBlpUntil(shortCtx, masterInfo, &stopPositionList, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("RunBlpUntil for %v until %v failed: %v", sdw.shardInfo.MasterAlias, stopPositionList, err)
}
// 4 - wait until the destination tablet is equal or passed
// that master binlog position, and stop its replication.
sdw.wr.Logger().Infof("Waiting for destination tablet %v to catch up to %v", sdw.destinationAlias, masterPos)
destinationTablet, err := sdw.wr.TopoServer().GetTablet(ctx, sdw.destinationAlias)
if err != nil {
return err
}
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
_, err = sdw.wr.TabletManagerClient().StopSlaveMinimum(shortCtx, destinationTablet, masterPos, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("StopSlaveMinimum for %v at %v failed: %v", sdw.destinationAlias, masterPos, err)
}
wrangler.RecordStartSlaveAction(sdw.cleaner, destinationTablet)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(sdw.cleaner, sdw.destinationAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", sdw.destinationAlias, err)
}
action.TabletType = pb.TabletType_SPARE
// 5 - restart filtered replication on destination master
sdw.wr.Logger().Infof("Restarting filtered replication on master %v", sdw.shardInfo.MasterAlias)
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
err = sdw.wr.TabletManagerClient().StartBlp(shortCtx, masterInfo)
if err := sdw.cleaner.RemoveActionByName(wrangler.StartBlpActionName, topo.TabletAliasString(sdw.shardInfo.MasterAlias)); err != nil {
sdw.wr.Logger().Warningf("Cannot find cleaning action %v/%v: %v", wrangler.StartBlpActionName, topo.TabletAliasString(sdw.shardInfo.MasterAlias), err)
}
cancel()
if err != nil {
return fmt.Errorf("StartBlp failed for %v: %v", sdw.shardInfo.MasterAlias, err)
}
return nil
}
func (vsdw *VerticalSplitDiffWorker) synchronizeReplication() error {
vsdw.setState(stateVSDSynchronizeReplication)
// 1 - stop the master binlog replication, get its current position
vsdw.wr.Logger().Infof("Stopping master binlog replication on %v", vsdw.shardInfo.MasterAlias)
blpPositionList, err := vsdw.wr.ActionInitiator().StopBlp(vsdw.shardInfo.MasterAlias, 30*time.Second)
if err != nil {
return fmt.Errorf("StopBlp on master %v failed: %v", vsdw.shardInfo.MasterAlias, err)
}
wrangler.RecordStartBlpAction(vsdw.cleaner, vsdw.shardInfo.MasterAlias, 30*time.Second)
// 2 - stop the source 'checker' at a binlog position
// higher than the destination master
stopPositionList := blproto.BlpPositionList{
Entries: make([]blproto.BlpPosition, 1),
}
ss := vsdw.shardInfo.SourceShards[0]
// find where we should be stopping
pos, err := blpPositionList.FindBlpPositionById(ss.Uid)
if err != nil {
return fmt.Errorf("no binlog position on the master for Uid %v", ss.Uid)
}
// stop replication
vsdw.wr.Logger().Infof("Stopping slave %v at a minimum of %v", vsdw.sourceAlias, pos.Position)
stoppedAt, err := vsdw.wr.ActionInitiator().StopSlaveMinimum(vsdw.sourceAlias, pos.Position, 30*time.Second)
if err != nil {
return fmt.Errorf("cannot stop slave %v at right binlog position %v: %v", vsdw.sourceAlias, pos.Position, err)
}
stopPositionList.Entries[0].Uid = ss.Uid
stopPositionList.Entries[0].Position = stoppedAt.Position
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(vsdw.cleaner, vsdw.sourceAlias, 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(vsdw.cleaner, vsdw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", vsdw.sourceAlias, err)
}
action.TabletType = topo.TYPE_SPARE
// 3 - ask the master of the destination shard to resume filtered
// replication up to the new list of positions
vsdw.wr.Logger().Infof("Restarting master %v until it catches up to %v", vsdw.shardInfo.MasterAlias, stopPositionList)
masterPos, err := vsdw.wr.ActionInitiator().RunBlpUntil(vsdw.shardInfo.MasterAlias, &stopPositionList, 30*time.Second)
if err != nil {
return fmt.Errorf("RunBlpUntil on %v until %v failed: %v", vsdw.shardInfo.MasterAlias, stopPositionList, err)
}
// 4 - wait until the destination checker is equal or passed
// that master binlog position, and stop its replication.
vsdw.wr.Logger().Infof("Waiting for destination checker %v to catch up to %v", vsdw.destinationAlias, masterPos)
_, err = vsdw.wr.ActionInitiator().StopSlaveMinimum(vsdw.destinationAlias, masterPos, 30*time.Second)
if err != nil {
return fmt.Errorf("StopSlaveMinimum on %v at %v failed: %v", vsdw.destinationAlias, masterPos, err)
}
wrangler.RecordStartSlaveAction(vsdw.cleaner, vsdw.destinationAlias, 30*time.Second)
action, err = wrangler.FindChangeSlaveTypeActionByTarget(vsdw.cleaner, vsdw.destinationAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", vsdw.destinationAlias, err)
}
action.TabletType = topo.TYPE_SPARE
// 5 - restart filtered replication on destination master
vsdw.wr.Logger().Infof("Restarting filtered replication on master %v", vsdw.shardInfo.MasterAlias)
err = vsdw.wr.ActionInitiator().StartBlp(vsdw.shardInfo.MasterAlias, 30*time.Second)
if err := vsdw.cleaner.RemoveActionByName(wrangler.StartBlpActionName, vsdw.shardInfo.MasterAlias.String()); err != nil {
vsdw.wr.Logger().Warningf("Cannot find cleaning action %v/%v: %v", wrangler.StartBlpActionName, vsdw.shardInfo.MasterAlias.String(), err)
}
if err != nil {
return fmt.Errorf("StartBlp on %v failed: %v", vsdw.shardInfo.MasterAlias, err)
}
return nil
}
func (vsdw *VerticalSplitDiffWorker) synchronizeReplication(ctx context.Context) error {
vsdw.SetState(WorkerStateSyncReplication)
shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
masterInfo, err := vsdw.wr.TopoServer().GetTablet(shortCtx, vsdw.shardInfo.MasterAlias)
cancel()
if err != nil {
return fmt.Errorf("synchronizeReplication: cannot get Tablet record for master %v: %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), err)
}
// 1 - stop the master binlog replication, get its current position
vsdw.wr.Logger().Infof("Stopping master binlog replication on %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias))
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
blpPositionList, err := vsdw.wr.TabletManagerClient().StopBlp(shortCtx, masterInfo)
cancel()
if err != nil {
return fmt.Errorf("StopBlp on master %v failed: %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), err)
}
wrangler.RecordStartBlpAction(vsdw.cleaner, masterInfo)
// 2 - stop the source tablet at a binlog position
// higher than the destination master
stopPositionList := make([]*tabletmanagerdatapb.BlpPosition, 1)
ss := vsdw.shardInfo.SourceShards[0]
// find where we should be stopping
blpPos := tmutils.FindBlpPositionByID(blpPositionList, ss.Uid)
if blpPos == nil {
return fmt.Errorf("no binlog position on the master for Uid %v", ss.Uid)
}
// stop replication
vsdw.wr.Logger().Infof("Stopping slave %v at a minimum of %v", topoproto.TabletAliasString(vsdw.sourceAlias), blpPos.Position)
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
sourceTablet, err := vsdw.wr.TopoServer().GetTablet(shortCtx, vsdw.sourceAlias)
cancel()
if err != nil {
return err
}
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
stoppedAt, err := vsdw.wr.TabletManagerClient().StopSlaveMinimum(shortCtx, sourceTablet, blpPos.Position, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("cannot stop slave %v at right binlog position %v: %v", topoproto.TabletAliasString(vsdw.sourceAlias), blpPos.Position, err)
}
stopPositionList[0] = &tabletmanagerdatapb.BlpPosition{
Uid: ss.Uid,
Position: stoppedAt,
}
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(vsdw.cleaner, sourceTablet)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(vsdw.cleaner, vsdw.sourceAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", topoproto.TabletAliasString(vsdw.sourceAlias), err)
}
action.TabletType = topodatapb.TabletType_SPARE
// 3 - ask the master of the destination shard to resume filtered
// replication up to the new list of positions
vsdw.wr.Logger().Infof("Restarting master %v until it catches up to %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), stopPositionList)
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
masterPos, err := vsdw.wr.TabletManagerClient().RunBlpUntil(shortCtx, masterInfo, stopPositionList, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("RunBlpUntil on %v until %v failed: %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), stopPositionList, err)
}
// 4 - wait until the destination tablet is equal or passed
// that master binlog position, and stop its replication.
vsdw.wr.Logger().Infof("Waiting for destination tablet %v to catch up to %v", topoproto.TabletAliasString(vsdw.destinationAlias), masterPos)
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
destinationTablet, err := vsdw.wr.TopoServer().GetTablet(shortCtx, vsdw.destinationAlias)
cancel()
if err != nil {
return err
}
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
_, err = vsdw.wr.TabletManagerClient().StopSlaveMinimum(shortCtx, destinationTablet, masterPos, *remoteActionsTimeout)
cancel()
if err != nil {
return fmt.Errorf("StopSlaveMinimum on %v at %v failed: %v", topoproto.TabletAliasString(vsdw.destinationAlias), masterPos, err)
}
wrangler.RecordStartSlaveAction(vsdw.cleaner, destinationTablet)
action, err = wrangler.FindChangeSlaveTypeActionByTarget(vsdw.cleaner, vsdw.destinationAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", topoproto.TabletAliasString(vsdw.destinationAlias), err)
}
action.TabletType = topodatapb.TabletType_SPARE
// 5 - restart filtered replication on destination master
vsdw.wr.Logger().Infof("Restarting filtered replication on master %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias))
shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
err = vsdw.wr.TabletManagerClient().StartBlp(shortCtx, masterInfo)
if err := vsdw.cleaner.RemoveActionByName(wrangler.StartBlpActionName, topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias)); err != nil {
vsdw.wr.Logger().Warningf("Cannot find cleaning action %v/%v: %v", wrangler.StartBlpActionName, topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), err)
}
cancel()
if err != nil {
return fmt.Errorf("StartBlp on %v failed: %v", topoproto.TabletAliasString(vsdw.shardInfo.MasterAlias), err)
}
return nil
}
// findTargets phase:
// - find one rdonly in the source shard
// - mark it as 'checker' pointing back to us
// - get the aliases of all the targets
func (scw *SplitCloneWorker) findTargets() error {
scw.setState(stateSCFindTargets)
var err error
// find an appropriate endpoint in the source shards
scw.sourceAliases = make([]topo.TabletAlias, len(scw.sourceShards))
for i, si := range scw.sourceShards {
scw.sourceAliases[i], err = findChecker(scw.wr, scw.cleaner, scw.cell, si.Keyspace(), si.ShardName())
if err != nil {
return fmt.Errorf("cannot find checker for %v/%v/%v: %v", scw.cell, si.Keyspace(), si.ShardName(), err)
}
scw.wr.Logger().Infof("Using tablet %v as source for %v/%v", scw.sourceAliases[i], si.Keyspace(), si.ShardName())
}
// get the tablet info for them, and stop their replication
scw.sourceTablets = make([]*topo.TabletInfo, len(scw.sourceAliases))
for i, alias := range scw.sourceAliases {
scw.sourceTablets[i], err = scw.wr.TopoServer().GetTablet(alias)
if err != nil {
return fmt.Errorf("cannot read tablet %v: %v", alias, err)
}
if err := scw.wr.TabletManagerClient().StopSlave(scw.sourceTablets[i], 30*time.Second); err != nil {
return fmt.Errorf("cannot stop replication on tablet %v", alias)
}
wrangler.RecordStartSlaveAction(scw.cleaner, scw.sourceTablets[i], 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(scw.cleaner, alias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", alias, err)
}
action.TabletType = topo.TYPE_SPARE
}
// find all the targets in the destination shards
scw.destinationAliases = make([][]topo.TabletAlias, len(scw.destinationShards))
scw.destinationTablets = make([]map[topo.TabletAlias]*topo.TabletInfo, len(scw.destinationShards))
scw.destinationMasterAliases = make([]topo.TabletAlias, len(scw.destinationShards))
for shardIndex, si := range scw.destinationShards {
scw.destinationAliases[shardIndex], err = topo.FindAllTabletAliasesInShard(scw.wr.TopoServer(), si.Keyspace(), si.ShardName())
if err != nil {
return fmt.Errorf("cannot find all target tablets in %v/%v: %v", si.Keyspace(), si.ShardName(), err)
}
scw.wr.Logger().Infof("Found %v target aliases in shard %v/%v", len(scw.destinationAliases[shardIndex]), si.Keyspace(), si.ShardName())
// get the TabletInfo for all targets
scw.destinationTablets[shardIndex], err = topo.GetTabletMap(scw.wr.TopoServer(), scw.destinationAliases[shardIndex])
if err != nil {
return fmt.Errorf("cannot read all target tablets in %v/%v: %v", si.Keyspace(), si.ShardName(), err)
}
// find and validate the master
for tabletAlias, ti := range scw.destinationTablets[shardIndex] {
if ti.Type == topo.TYPE_MASTER {
if scw.destinationMasterAliases[shardIndex].IsZero() {
scw.destinationMasterAliases[shardIndex] = tabletAlias
} else {
return fmt.Errorf("multiple masters in destination shard: %v and %v at least", scw.destinationMasterAliases[shardIndex], tabletAlias)
}
}
}
if scw.destinationMasterAliases[shardIndex].IsZero() {
return fmt.Errorf("no master in destination shard")
}
}
return nil
}
func (sdw *SplitDiffWorker) synchronizeReplication() error {
sdw.setState(stateSDSynchronizeReplication)
// 1 - stop the master binlog replication, get its current position
log.Infof("Stopping master binlog replication on %v", sdw.shardInfo.MasterAlias)
blpPositionList, err := sdw.wr.ActionInitiator().StopBlp(sdw.shardInfo.MasterAlias, 30*time.Second)
if err != nil {
return err
}
wrangler.RecordStartBlpAction(sdw.cleaner, sdw.shardInfo.MasterAlias, 30*time.Second)
// 2 - stop all the source 'checker' at a binlog position
// higher than the destination master
stopPositionList := myproto.BlpPositionList{
Entries: make([]myproto.BlpPosition, len(sdw.shardInfo.SourceShards)),
}
for i, ss := range sdw.shardInfo.SourceShards {
// find where we should be stopping
pos, err := blpPositionList.FindBlpPositionById(ss.Uid)
if err != nil {
return fmt.Errorf("No binlog position on the master for Uid %v", ss.Uid)
}
// stop replication
log.Infof("Stopping slave[%v] %v at a minimum of %v", i, sdw.sourceAliases[i], pos.GroupId)
stoppedAt, err := sdw.wr.ActionInitiator().StopSlaveMinimum(sdw.sourceAliases[i], pos.GroupId, 30*time.Second)
if err != nil {
return fmt.Errorf("Cannot stop slave %v at right binlog position %v: %v", sdw.sourceAliases[i], pos.GroupId, err)
}
stopPositionList.Entries[i].Uid = ss.Uid
stopPositionList.Entries[i].GroupId = stoppedAt.MasterLogGroupId
// change the cleaner actions from ChangeSlaveType(rdonly)
// to StartSlave() + ChangeSlaveType(spare)
wrangler.RecordStartSlaveAction(sdw.cleaner, sdw.sourceAliases[i], 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(sdw.cleaner, sdw.sourceAliases[i])
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", sdw.sourceAliases[i], err)
}
action.TabletType = topo.TYPE_SPARE
}
// 3 - ask the master of the destination shard to resume filtered
// replication up to the new list of positions
log.Infof("Restarting master %v until it catches up to %v", sdw.shardInfo.MasterAlias, stopPositionList)
masterPos, err := sdw.wr.ActionInitiator().RunBlpUntil(sdw.shardInfo.MasterAlias, &stopPositionList, 30*time.Second)
if err != nil {
return err
}
// 4 - wait until the destination checker is equal or passed
// that master binlog position, and stop its replication.
log.Infof("Waiting for destination checker %v to catch up to %v", sdw.destinationAlias, masterPos.MasterLogGroupId)
_, err = sdw.wr.ActionInitiator().StopSlaveMinimum(sdw.destinationAlias, masterPos.MasterLogGroupId, 30*time.Second)
if err != nil {
return err
}
wrangler.RecordStartSlaveAction(sdw.cleaner, sdw.destinationAlias, 30*time.Second)
action, err := wrangler.FindChangeSlaveTypeActionByTarget(sdw.cleaner, sdw.destinationAlias)
if err != nil {
return fmt.Errorf("cannot find ChangeSlaveType action for %v: %v", sdw.destinationAlias, err)
}
action.TabletType = topo.TYPE_SPARE
// 5 - restart filtered replication on destination master
log.Infof("Restarting filtered replication on master %v", sdw.shardInfo.MasterAlias)
err = sdw.wr.ActionInitiator().StartBlp(sdw.shardInfo.MasterAlias, 30*time.Second)
if err := sdw.cleaner.RemoveActionByName(wrangler.StartBlpActionName, sdw.shardInfo.MasterAlias.String()); err != nil {
log.Warningf("Cannot find cleaning action %v/%v: %v", wrangler.StartBlpActionName, sdw.shardInfo.MasterAlias.String(), err)
}
if err != nil {
return err
}
return nil
}