Esempio n. 1
0
func (b *buildFile) run(c *Container) error {
	var errCh chan error
	if b.verbose {
		errCh = utils.Go(func() error {
			// FIXME: call the 'attach' job so that daemon.Attach can be made private
			//
			// FIXME (LK4D4): Also, maybe makes sense to call "logs" job, it is like attach
			// but without hijacking for stdin. Also, with attach there can be race
			// condition because of some output already was printed before it.
			return <-b.daemon.Attach(c, nil, nil, b.outStream, b.errStream)
		})
	}

	//start the container
	if err := c.Start(); err != nil {
		return err
	}

	if errCh != nil {
		if err := <-errCh; err != nil {
			return err
		}
	}

	// Wait for it to finish
	if ret, _ := c.State.WaitStop(-1 * time.Second); ret != 0 {
		err := &utils.JSONError{
			Message: fmt.Sprintf("The command %v returned a non-zero code: %d", b.config.Cmd, ret),
			Code:    ret,
		}
		return err
	}

	return nil
}
Esempio n. 2
0
func (container *Container) waitForStart() error {
	container.monitor = newContainerMonitor(container, container.hostConfig.RestartPolicy)

	// block until we either receive an error from the initial start of the container's
	// process or until the process is running in the container
	select {
	case <-container.monitor.startSignal:
	case err := <-utils.Go(container.monitor.Start):
		return err
	}

	return nil
}
Esempio n. 3
0
// CopyFileWithTar emulates the behavior of the 'cp' command-line
// for a single file. It copies a regular file from path `src` to
// path `dst`, and preserves all its metadata.
//
// If `dst` ends with a trailing slash '/', the final destination path
// will be `dst/base(src)`.
func CopyFileWithTar(src, dst string) (err error) {
	log.Debugf("CopyFileWithTar(%s, %s)", src, dst)
	srcSt, err := os.Stat(src)
	if err != nil {
		return err
	}
	if srcSt.IsDir() {
		return fmt.Errorf("Can't copy a directory")
	}
	// Clean up the trailing /
	if dst[len(dst)-1] == '/' {
		dst = path.Join(dst, filepath.Base(src))
	}
	// Create the holding directory if necessary
	if err := os.MkdirAll(filepath.Dir(dst), 0700); err != nil && !os.IsExist(err) {
		return err
	}

	r, w := io.Pipe()
	errC := utils.Go(func() error {
		defer w.Close()

		srcF, err := os.Open(src)
		if err != nil {
			return err
		}
		defer srcF.Close()

		hdr, err := tar.FileInfoHeader(srcSt, "")
		if err != nil {
			return err
		}
		hdr.Name = filepath.Base(dst)
		tw := tar.NewWriter(w)
		defer tw.Close()
		if err := tw.WriteHeader(hdr); err != nil {
			return err
		}
		if _, err := io.Copy(tw, srcF); err != nil {
			return err
		}
		return nil
	})
	defer func() {
		if er := <-errC; err != nil {
			err = er
		}
	}()
	return Untar(r, filepath.Dir(dst), nil)
}
Esempio n. 4
0
func (cli *DockerCli) hijack(method, path string, setRawTerminal bool, in io.ReadCloser, stdout, stderr io.Writer, started chan io.Closer) error {
	defer func() {
		if started != nil {
			close(started)
		}
	}()

	req, err := http.NewRequest(method, fmt.Sprintf("/v%s%s", api.APIVERSION, path), nil)
	if err != nil {
		return err
	}
	req.Header.Set("User-Agent", "Docker-Client/"+dockerversion.VERSION)
	req.Header.Set("Content-Type", "plain/text")
	req.Host = cli.addr

	dial, err := cli.dial()
	if err != nil {
		if strings.Contains(err.Error(), "connection refused") {
			return fmt.Errorf("Cannot connect to the Docker daemon. Is 'docker -d' running on this host?")
		}
		return err
	}
	clientconn := httputil.NewClientConn(dial, nil)
	defer clientconn.Close()

	// Server hijacks the connection, error 'connection closed' expected
	clientconn.Do(req)

	rwc, br := clientconn.Hijack()
	defer rwc.Close()

	if started != nil {
		started <- rwc
	}

	var receiveStdout chan error

	var oldState *term.State

	if in != nil && setRawTerminal && cli.isTerminal && os.Getenv("NORAW") == "" {
		oldState, err = term.SetRawTerminal(cli.terminalFd)
		if err != nil {
			return err
		}
		defer term.RestoreTerminal(cli.terminalFd, oldState)
	}

	if stdout != nil || stderr != nil {
		receiveStdout = utils.Go(func() (err error) {
			defer func() {
				if in != nil {
					if setRawTerminal && cli.isTerminal {
						term.RestoreTerminal(cli.terminalFd, oldState)
					}
					// For some reason this Close call blocks on darwin..
					// As the client exists right after, simply discard the close
					// until we find a better solution.
					if runtime.GOOS != "darwin" {
						in.Close()
					}
				}
			}()

			// When TTY is ON, use regular copy
			if setRawTerminal && stdout != nil {
				_, err = io.Copy(stdout, br)
			} else {
				_, err = utils.StdCopy(stdout, stderr, br)
			}
			log.Debugf("[hijack] End of stdout")
			return err
		})
	}

	sendStdin := utils.Go(func() error {
		if in != nil {
			io.Copy(rwc, in)
			log.Debugf("[hijack] End of stdin")
		}
		if tcpc, ok := rwc.(*net.TCPConn); ok {
			if err := tcpc.CloseWrite(); err != nil {
				log.Debugf("Couldn't send EOF: %s", err)
			}
		} else if unixc, ok := rwc.(*net.UnixConn); ok {
			if err := unixc.CloseWrite(); err != nil {
				log.Debugf("Couldn't send EOF: %s", err)
			}
		}
		// Discard errors due to pipe interruption
		return nil
	})

	if stdout != nil || stderr != nil {
		if err := <-receiveStdout; err != nil {
			log.Debugf("Error receiveStdout: %s", err)
			return err
		}
	}

	if !cli.isTerminal {
		if err := <-sendStdin; err != nil {
			log.Debugf("Error sendStdin: %s", err)
			return err
		}
	}
	return nil
}
Esempio n. 5
0
// FIXME: this should be private, and every outside subsystem
// should go through the "container_attach" job. But that would require
// that job to be properly documented, as well as the relationship betweem
// Attach and ContainerAttach.
//
// This method is in use by builder/builder.go.
func (daemon *Daemon) Attach(container *Container, stdin io.ReadCloser, stdinCloser io.Closer, stdout io.Writer, stderr io.Writer) chan error {
	var (
		cStdout, cStderr io.ReadCloser
		nJobs            int
		errors           = make(chan error, 3)
	)

	if stdin != nil && container.Config.OpenStdin {
		nJobs += 1
		if cStdin, err := container.StdinPipe(); err != nil {
			errors <- err
		} else {
			go func() {
				log.Debugf("attach: stdin: begin")
				defer log.Debugf("attach: stdin: end")
				// No matter what, when stdin is closed (io.Copy unblock), close stdout and stderr
				if container.Config.StdinOnce && !container.Config.Tty {
					defer cStdin.Close()
				} else {
					defer func() {
						if cStdout != nil {
							cStdout.Close()
						}
						if cStderr != nil {
							cStderr.Close()
						}
					}()
				}
				if container.Config.Tty {
					_, err = utils.CopyEscapable(cStdin, stdin)
				} else {
					_, err = io.Copy(cStdin, stdin)
				}
				if err == io.ErrClosedPipe {
					err = nil
				}
				if err != nil {
					log.Errorf("attach: stdin: %s", err)
				}
				errors <- err
			}()
		}
	}
	if stdout != nil {
		nJobs += 1
		if p, err := container.StdoutPipe(); err != nil {
			errors <- err
		} else {
			cStdout = p
			go func() {
				log.Debugf("attach: stdout: begin")
				defer log.Debugf("attach: stdout: end")
				// If we are in StdinOnce mode, then close stdin
				if container.Config.StdinOnce && stdin != nil {
					defer stdin.Close()
				}
				if stdinCloser != nil {
					defer stdinCloser.Close()
				}
				_, err := io.Copy(stdout, cStdout)
				if err == io.ErrClosedPipe {
					err = nil
				}
				if err != nil {
					log.Errorf("attach: stdout: %s", err)
				}
				errors <- err
			}()
		}
	} else {
		go func() {
			if stdinCloser != nil {
				defer stdinCloser.Close()
			}
			if cStdout, err := container.StdoutPipe(); err != nil {
				log.Errorf("attach: stdout pipe: %s", err)
			} else {
				io.Copy(&utils.NopWriter{}, cStdout)
			}
		}()
	}
	if stderr != nil {
		nJobs += 1
		if p, err := container.StderrPipe(); err != nil {
			errors <- err
		} else {
			cStderr = p
			go func() {
				log.Debugf("attach: stderr: begin")
				defer log.Debugf("attach: stderr: end")
				// If we are in StdinOnce mode, then close stdin
				if container.Config.StdinOnce && stdin != nil {
					defer stdin.Close()
				}
				if stdinCloser != nil {
					defer stdinCloser.Close()
				}
				_, err := io.Copy(stderr, cStderr)
				if err == io.ErrClosedPipe {
					err = nil
				}
				if err != nil {
					log.Errorf("attach: stderr: %s", err)
				}
				errors <- err
			}()
		}
	} else {
		go func() {
			if stdinCloser != nil {
				defer stdinCloser.Close()
			}

			if cStderr, err := container.StderrPipe(); err != nil {
				log.Errorf("attach: stdout pipe: %s", err)
			} else {
				io.Copy(&utils.NopWriter{}, cStderr)
			}
		}()
	}

	return utils.Go(func() error {
		defer func() {
			if cStdout != nil {
				cStdout.Close()
			}
			if cStderr != nil {
				cStderr.Close()
			}
		}()

		// FIXME: how to clean up the stdin goroutine without the unwanted side effect
		// of closing the passed stdin? Add an intermediary io.Pipe?
		for i := 0; i < nJobs; i += 1 {
			log.Debugf("attach: waiting for job %d/%d", i+1, nJobs)
			if err := <-errors; err != nil {
				log.Errorf("attach: job %d returned error %s, aborting all jobs", i+1, err)
				return err
			}
			log.Debugf("attach: job %d completed successfully", i+1)
		}
		log.Debugf("attach: all jobs completed successfully")
		return nil
	})
}