func getThreads(c *imap.Client) ([]Thread, error) {
set, err := imap.NewSeqSet("1:*")
cmd, err := imap.Wait(c.Fetch(set, "X-GM-THRID", "UID"))
if err != nil {
fmt.Println(err)
return nil, ErrBadConnection
}
var result []Thread
seen := make(map[string]int)
for _, rsp := range cmd.Data {
thrid := imap.AsString(rsp.MessageInfo().Attrs["X-GM-THRID"])
uid := imap.AsNumber(rsp.MessageInfo().Attrs["UID"])
if i, ok := seen[thrid]; ok {
result[i] = append(result[i], uid)
} else {
result = append(result, Thread{uid})
seen[thrid] = len(result) - 1
}
}
return result, nil
}
func getEmails(client *imap.Client, cmd *imap.Command, markAsRead, delete bool, responses chan Response) {
seq := &imap.SeqSet{}
msgCount := 0
for _, rsp := range cmd.Data {
for _, uid := range rsp.SearchResults() {
msgCount++
seq.AddNum(uid)
}
}
// nothing to request?! why you even callin me, foolio?
if seq.Empty() {
return
}
fCmd, err := imap.Wait(client.UIDFetch(seq, "INTERNALDATE", "BODY[]", "UID", "RFC822.HEADER"))
if err != nil {
responses <- Response{Err: fmt.Errorf("unable to perform uid fetch: %s", err)}
return
}
var email Email
for _, msgData := range fCmd.Data {
msgFields := msgData.MessageInfo().Attrs
// make sure is a legit response before we attempt to parse it
// deal with unsolicited FETCH responses containing only flags
// I'm lookin' at YOU, Gmail!
// http://mailman13.u.washington.edu/pipermail/imap-protocol/2014-October/002355.html
// http://stackoverflow.com/questions/26262472/gmail-imap-is-sometimes-returning-bad-results-for-fetch
if _, ok := msgFields["RFC822.HEADER"]; !ok {
continue
}
email, err = newEmail(msgFields)
if err != nil {
responses <- Response{Err: fmt.Errorf("unable to parse email: %s", err)}
return
}
responses <- Response{Email: email}
if !markAsRead {
err = removeSeen(client, imap.AsNumber(msgFields["UID"]))
if err != nil {
responses <- Response{Err: fmt.Errorf("unable to remove seen flag: %s", err)}
return
}
}
if delete {
err = deleteEmail(client, imap.AsNumber(msgFields["UID"]))
if err != nil {
responses <- Response{Err: fmt.Errorf("unable to delete email: %s", err)}
return
}
}
}
return
}
/**
* This method moves the mail associated with the given 'UID', from the folder where it currently
* resides, into the "toFolder" folder and sets its "Deleted" flag.
* After this operation, the following post condition holds, if a mail with the given UID existed
* in the original folder:
* - The mail in the original folder has its "Deleted" flag set
* - The folder 'newFolder' now contains a new mail with the Header and Content of the original
* mail (but with a new UID)
*
* ATTENTION:
* The original mail is NOT deleted from the folder where it resided (only its deleted flag is set).
* The deletion operation will happen when the IMAP connection is closed, or the EXPUNGE operation
* is called.
*
* @param uid The UID of the mail to be moved
* @param folder The folder in which the current mail resides (its source location)
* @param toFolder The folder the mail should be moved to (the target folder)
* @return Returns the UID of the newly created mail in the target folder or an error, if something
* went wrong.
*/
func (mc *MailCon) moveMail_internal(uid, folder, toFolder string) (uint32, error) {
var targetMbox string = mc.mailbox
// 1) First check if we need to select a specific folder in the mailbox or if it is root
if err := mc.selectFolder(folder, true); err != nil {
return 0, err
}
// 2) Assign necessary variables and initiate IMAP Copy process
set, _ := imap.NewSeqSet(uid)
if len(toFolder) > 0 && toFolder != "/" {
targetMbox = fmt.Sprintf("%s%s%s", mc.mailbox, mc.delim, toFolder)
}
cmd, err := mc.client.UIDCopy(set, targetMbox)
var resp *imap.Response
if resp, err = cmd.Result(imap.OK); err != nil {
return 0,
fmt.Errorf("[watney] ERROR waiting for result of copy command\n\t%s\n", err.Error())
}
// 3) Execute the copy process to copy the mail internally to the new folder
if _, err := mc.waitFor(mc.client.UIDStore(set, "+FLAGS",
SerializeFlags(&Flags{Deleted: true}))); err != nil {
return 0, fmt.Errorf("[watney] ERROR waiting for result of update flags command\n\t%s\n",
err.Error())
}
// 4) Check if the copy worked, and if so, return the new UID and no error
// The Response is an 'COPYUID' with the fields:
// [0] COPYUID:string | [1] internaldate:long64 | [2] Orig-UID:uint32 | [3] New-UID:uint32
// The Orig-UID resambles the given UID for the original mail
// The New-UID is the UID of the new mail stored in the 'toFolder'
if len(resp.Fields) == 4 {
return imap.AsNumber(resp.Fields[3]), nil
} else {
return 0, errors.New("[watney] WARNING: Copy completed without doing anyting\n")
}
}
// getEmails will fetch the full bodies of all emails listed in the given command.
func getEmails(client *imap.Client, cmd *imap.Command) ([]map[string]interface{}, error) {
var emails []map[string]interface{}
seq := new(imap.SeqSet)
for _, rsp := range cmd.Data {
for _, uid := range rsp.SearchResults() {
seq.AddNum(uid)
}
}
if seq.Empty() {
return emails, nil
}
fCmd, err := imap.Wait(client.UIDFetch(seq, "INTERNALDATE", "BODY[]", "UID", "RFC822.HEADER"))
if err != nil {
return emails, err
}
var email map[string]interface{}
for _, msgData := range fCmd.Data {
msgFields := msgData.MessageInfo().Attrs
email, err = newEmailMessage(msgFields)
if err != nil {
return emails, err
}
emails = append(emails, email)
// mark message as read
fSeq := new(imap.SeqSet)
fSeq.AddNum(imap.AsNumber(msgFields["UID"]))
_, err = imap.Wait(client.UIDStore(fSeq, "+FLAGS", "\\SEEN"))
if err != nil {
return emails, err
}
}
return emails, nil
}
// handleMessage processes one message, invokes the callback and deletes it on
// success.
func (w *IMAPSource) handleMessage(rsp *imap.Response) error {
msgInfo := rsp.MessageInfo()
err := w.invokeMessageCallback(msgInfo)
if err != nil {
return err
}
uid := imap.AsNumber(msgInfo.Attrs["UID"])
logger.Debugf("internally marking message uid=%d for deletion", uid)
w.deletionSet.AddNum(uid)
return err
}
/**
* Response: * 25 EXISTS | 2 | 25
* new Data update: * 25 EXISTS
* This is all the fields we get: %!s(uint32=25)
* This is all the fields we get: EXISTS
* Response: * 1 RECENT | 2 | 1
* new Data update: * 1 RECENT
* This is all the fields we get: %!s(uint32=1)
* This is all the fields we get: RECENT
*
* Usually, a new mail update from the server splits into 2 responses: 1 EXIST and 1 RECENT
* The EXIST command provides the server UID of the new message received and the RECENT command
* tells the client how many new messages have been recently received.
*
* @return Array of sequence numbers for all newly received mails
*/
func (mc *MailCon) CheckNewMails() ([]uint32, error) {
mc.mutex.Lock()
defer mc.mutex.Unlock()
var (
recentMails uint32
lastSeqNumber uint32
newMailSeqNumbers = make([]uint32, 0)
err error = nil
)
if mc.client.Data != nil && len(mc.client.Data) > 0 {
for _, resp := range mc.client.Data {
fmt.Printf("Response: %s | %d | %d\n", resp.String(), resp.Type, resp.Value())
if resp.Type == imap.Data {
fmt.Printf("new Data update: %s | Label: %s\n", resp.String(), resp.Label)
f := resp.Fields
if len(f) > 1 {
// The response is either an EXIST or a RECENT
// Fields[0] | Fields[1]
// ---------------------------|-------------------------------
// last sequence number : int | EXIST
// number of new mails : int | RECENT
switch n := imap.AsNumber(f[0]); strings.ToUpper(imap.AsAtom(f[1])) {
case "RECENT":
recentMails = n
case "EXISTS":
lastSeqNumber = n
}
} else {
err = errors.New(fmt.Sprintf("Got a data update message with less than 2 "+
"fields: %s", resp.Fields))
fmt.Printf("[watney]: ERROR: %s\n", err.Error())
}
} else {
err = errors.New(fmt.Sprintf("Unhandled response in message queue, while "+
"checking for new mails: \n\t%s", resp.String()))
}
}
}
// fmt.Printf("Received info is: %b, %s\n", recentMsg, newMsgUIDs)
// Empty the response message queue
mc.client.Data = nil
// Compute sequence numbers for all new mails
var i uint32
for i = 0; i < recentMails; i++ {
newMailSeqNumbers = append(newMailSeqNumbers, lastSeqNumber-i)
}
return newMailSeqNumbers, err
}
/**
* Creates a new mail on the IMAP server with the given header information, flags and content
* (body).
* ATTENTION: DOES NOT LOCK THE IMAP CONNECTION! => Has to be wrapped into a mutex lock method
*/
func (mc *MailCon) createMailInFolder_internal(h *Header, f *Flags,
content string) (uid uint32, err error) {
var (
// Create the msg:
// Header info + empty line + content + empty line
msg string = strings.Join([]string{SerializeHeader(h), "", content, ""}, "\r\n")
lit imap.Literal = imap.NewLiteral([]byte(msg))
mbox string = fmt.Sprintf("%s%s%s", mc.mailbox, mc.delim, h.Folder)
cmd *imap.Command
resp *imap.Response
)
// 1) Execute the actual append mail command
if cmd, err = mc.client.Append(mbox, imap.AsFlagSet(SerializeFlags(f)), &h.Date, lit); err != nil {
return 0, err
}
if resp, err = cmd.Result(imap.OK); err != nil {
return 0,
fmt.Errorf("[watney] ERROR waiting for result of append command\n\t%s\n", err.Error())
}
// 2) Process the server response and extract the message UID of the previously added mail
// The Response is an 'APPENDUID' with the fields:
// [0] APPENDUID:string | [1] internaldate:long64 | [2] UID:uint32
return imap.AsNumber(resp.Fields[2]), err
}
