func startUDP(sink chan Pkt) {
bind, err := net.ResolveUDPAddr("udp", *bindAddr)
ready := make(chan struct{})
if err != nil {
log.Fatalln("Can not resolve bind address:", err)
}
lconn, err := net.ListenUDP("udp", bind)
if err != nil {
log.Fatalln("Can not listen on UDP:", err)
}
log.Println("Listening on UDP", *bindAddr)
go func() {
buf := make([]byte, govpn.MTU)
var n int
var raddr *net.UDPAddr
var err error
for {
<-ready
lconn.SetReadDeadline(time.Now().Add(time.Second))
n, raddr, err = lconn.ReadFromUDP(buf)
if err != nil {
sink <- Pkt{ready: ready}
continue
}
sink <- Pkt{
raddr.String(),
UDPSender{lconn, raddr},
buf[:n],
ready,
}
}
}()
ready <- struct{}{}
}
func (proxy *UDPProxy) replyLoop(proxyConn *net.UDPConn, clientAddr *net.UDPAddr, clientKey *connTrackKey) {
defer func() {
proxy.connTrackLock.Lock()
delete(proxy.connTrackTable, *clientKey)
proxy.connTrackLock.Unlock()
utils.Debugf("Done proxying between udp/%v and udp/%v", clientAddr.String(), proxy.backendAddr.String())
proxyConn.Close()
}()
readBuf := make([]byte, UDPBufSize)
for {
proxyConn.SetReadDeadline(time.Now().Add(UDPConnTrackTimeout))
again:
read, err := proxyConn.Read(readBuf)
if err != nil {
if err, ok := err.(*net.OpError); ok && err.Err == syscall.ECONNREFUSED {
// This will happen if the last write failed
// (e.g: nothing is actually listening on the
// proxied port on the container), ignore it
// and continue until UDPConnTrackTimeout
// expires:
goto again
}
return
}
for i := 0; i != read; {
written, err := proxy.listener.WriteToUDP(readBuf[i:read], clientAddr)
if err != nil {
return
}
i += written
utils.Debugf("Forwarded %v/%v bytes to udp/%v", i, read, clientAddr.String())
}
}
}
func AttemptOne(server *net.UDPAddr, ch chan bool) {
conn, err := net.Dial("udp", server.String())
res := false
defer func() {
ch <- res
}()
if err != nil {
return
}
defer conn.Close()
if err = conn.SetDeadline(time.Now().Add(2 * time.Second)); err != nil {
return
}
request := []byte{
0, 1, // Binding request
0, 0, // Message length
0x21, 0x12, 0xa4, 0x42, // magic
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12} // TID
if n, err := conn.Write(request); err != nil || n != len(request) {
return
}
buf := make([]byte, 1024)
n, err := conn.Read(buf)
res = (n > 0 && err == nil)
return
}
func (handler *VMessInboundHandler) handlePacket(conn *net.UDPConn, request *protocol.VMessRequest, packet v2net.Packet, clientAddr *net.UDPAddr) {
ray := handler.vPoint.DispatchToOutbound(packet)
close(ray.InboundInput())
responseKey := md5.Sum(request.RequestKey)
responseIV := md5.Sum(request.RequestIV)
buffer := alloc.NewBuffer().Clear()
defer buffer.Release()
responseWriter, err := v2io.NewAesEncryptWriter(responseKey[:], responseIV[:], buffer)
if err != nil {
log.Error("VMessIn: Failed to create encrypt writer: %v", err)
return
}
responseWriter.Write(request.ResponseHeader)
hasData := false
if data, ok := <-ray.InboundOutput(); ok {
hasData = true
responseWriter.Write(data.Value)
data.Release()
}
if hasData {
conn.WriteToUDP(buffer.Value, clientAddr)
log.Info("VMessIn sending %d bytes to %s", buffer.Len(), clientAddr.String())
}
}
func isValidNonce(clientUDPAddr *net.UDPAddr, nonceFromClient int64) bool {
clientUDPIpPort := clientUDPAddr.String()
state.nonceMap.RLock()
isValid := state.nonceMap.Map[clientUDPIpPort] == nonceFromClient
state.nonceMap.RUnlock()
return isValid
}
/*
Starts a UDP listener which will forward received data back to the application using
the supplied channel. The listener ID is returned along with a boolean indication
of success (true) or failure. The uid is the user created session id string that is
used to send buffers that are not related to a session_data struct.
*/
func (this *Cmgr) Listen_udp(port int, data2usr chan *Sess_data) (uid string, err error) {
var addr net.UDPAddr
uid = ""
addr.IP = net.IPv4(0, 0, 0, 0)
addr.Port = port
uconn, err := net.ListenUDP("udp", &addr)
if err != nil {
err = fmt.Errorf("unable to create a udp listener on port: %d; %s", port, err)
return
}
uid = fmt.Sprintf("u%d", this.ucount) // successful bind to port
this.ucount += 1
cp := new(connection)
cp.conn = nil
cp.uconn = uconn
cp.data2usr = data2usr // session data written to the channel
cp.id = uid // user assigned session id
this.clist[uid] = cp // hash for write to session
go this.conn_reader(cp) // start reader; will discard if data2usr is nil
this.clist[uid] = cp
return
}
func (listener *Listener) newUDPSession(remote *net.UDPAddr) (*UDPSession, bool) {
remoteAddrStr := remote.String()
listener.Lock()
if sess, ok := listener.remoteAddrs[remoteAddrStr]; ok == true {
listener.Unlock()
return sess, true
}
listener.Unlock()
var err error
var local *net.UDPConn
if local, err = net.ListenUDP("udp", &net.UDPAddr{}); err != nil {
//log.Println(err)
return nil, false
}
localAddr := local.LocalAddr().(*net.UDPAddr)
sess := newUDPSession(listener, remote, local, localAddr)
listener.Lock()
listener.remoteAddrs[remoteAddrStr] = sess
listener.Unlock()
return sess, false
}
func Pipeloop(ss *UDPConn, srcaddr *net.UDPAddr, remote UDP) {
buf := udpBuf.Get()
defer udpBuf.Put(buf)
defer nl.Delete(srcaddr.String())
for {
remote.SetReadDeadline(time.Now().Add(ss.timeout))
n, raddr, err := remote.ReadFrom(buf)
if err != nil {
if ne, ok := err.(*net.OpError); ok && (ne.Err == syscall.EMFILE || ne.Err == syscall.ENFILE) {
// log too many open file error
// EMFILE is process reaches open file limits, ENFILE is system limit
fmt.Println("[udp]read error:", err)
} else if ne.Err.Error() == "use of closed network connection" {
fmt.Println("[udp]Connection Closing:", remote.LocalAddr())
} else {
fmt.Println("[udp]error reading from:", remote.LocalAddr(), err)
}
return
}
// need improvement here
if N, ok := ReqList[raddr.String()]; ok {
go ss.WriteToUDP(append(N.Req[:N.ReqLen], buf[:n]...), srcaddr)
} else {
header, hlen := ParseHeader(raddr)
go ss.WriteToUDP(append(header[:hlen], buf[:n]...), srcaddr)
}
}
}
// Caller should have lock on UdpSession
func (s *UdpSession) Update(addr *net.UDPAddr) error {
if s.Addr.String() != addr.String() {
s.Addr = addr
}
s.LastHeartbeat = time.Now()
return nil
}
//Generate new nonce for udpAddr and add to nonceMap
func generateNewNonce(udpAddr *net.UDPAddr, nonceMap clientServerUtils.ConcurrentMap) int64 {
nonce := rand.Int63()
nonceMap.Lock()
nonceMap.Map[udpAddr.String()] = nonce
nonceMap.Unlock()
return nonce
}
func (nl *NATlist) Get(srcaddr *net.UDPAddr, ss *UDPConn) (c *CachedUDPConn, ok bool, err error) {
nl.Lock()
defer nl.Unlock()
index := srcaddr.String()
_, ok = nl.Conns[index]
if !ok {
//NAT not exists or expired
nl.AliveConns += 1
delete(nl.Conns, index)
ok = false
//full cone
conn, err := net.ListenUDP("udp", &net.UDPAddr{
IP: net.IPv6zero,
Port: 0,
})
if err != nil {
return nil, false, err
}
nl.Conns[index] = NewCachedUDPConn(conn)
c, _ = nl.Conns[index]
c.SetTimer(index)
go Pipeloop(ss, srcaddr, c)
} else {
//NAT exists
c, _ = nl.Conns[index]
c.Refresh()
}
err = nil
return
}
func (c *udpConn) WriteToUDP(b []byte, a *net.UDPAddr) (int, error) {
if atomic.LoadUint32(&c.closed) != 0 {
return 0, fmt.Errorf("connection is closed")
}
c.inet.mutex.Lock()
defer c.inet.mutex.Unlock()
dst := c.inet.listeners[a.String()]
if dst == nil {
return len(b), nil // drop packet
}
b2 := make([]byte, len(b))
copy(b2, b)
select {
case dst.rxChan <- udpPacket{
Data: b2,
Source: c.addr,
Destination: *a,
}:
default:
// rx buffer full, drop packet
}
return len(b), nil
}
// Handle a new client read or write request.
func (s *Server) HandleClient(addr *net.UDPAddr, req pkt.Packet) {
s.Logger.Debug("Handle Client!")
reqpkt, ok := req.(*pkt.ReqPacket)
if !ok {
s.Logger.Error("Invalid packet type for new connection!")
return
}
// Re-resolve for verification
clientaddr, err := net.ResolveUDPAddr("udp", addr.String())
if err != nil {
s.Logger.Error("Error: %s", err)
return
}
switch reqpkt.GetType() {
case pkt.RRQ:
err := s.HandleReadReq(reqpkt, clientaddr)
if err != nil {
s.Logger.Error("read request finished, with error:", err)
}
case pkt.WRQ:
err := s.HandleWriteReq(reqpkt, clientaddr)
if err != nil {
s.Logger.Error("write request finished, with error:", err)
}
default:
s.Logger.Error("Invalid Packet Type!")
}
}
func (d *DHT) ping(queryNode *net.UDPAddr) (nodeId []byte) {
// Prepare request.
ch := make(chan interface{})
reqId := d.getRequestId()
d.requests[queryNode.String()+string(reqId)] = &Request{ch, time.Now()}
// Send.
buf := []byte("d1:ad2:id20:")
buf = append(buf, d.self.id...)
buf = append(buf, []byte("e1:q4:ping1:t2:")...)
buf = append(buf, reqId...)
buf = append(buf, []byte("1:y1:qe")...)
d.conn.WriteTo(buf, queryNode)
// Wait for response.
res := <-ch
id, ok := res.(bencode.Dict)["r"].(bencode.Dict)["id"].(string)
if !ok {
return nil
}
return []byte(id)
}
// It's not found because we are using a different thing
func getUserAlias(who *net.UDPAddr) (string, error) {
usr, ok := connections[who.String()]
if !ok {
return "", errors.New("Your user wasn't found. Please login first")
}
return usr.Alias, nil
}
func respondWithFallback(raw []uint8, clientMsg *dns.Msg, clientQuestion dns.Question, proxy *net.UDPAddr) {
LOG.Println("fallback:", clientQuestion, proxy)
conn, err := net.Dial("udp", proxy.String())
if err != nil {
LOG.Fatalln(err)
}
conn.Write(raw)
buffer := make([]byte, 1<<15)
size, err := conn.Read(buffer)
if err != nil {
LOG.Fatalln(err, proxy)
}
msg := &dns.Msg{}
msg.Unpack(buffer[0:size])
LOG.Println(msg)
for _, answer := range msg.Answer {
clientMsg.Answer = append(clientMsg.Answer, answer)
}
clientMsg.Rcode = msg.Rcode
clientMsg.Response = msg.Response
clientMsg.Authoritative = msg.Authoritative
clientMsg.Recursion_desired = msg.Recursion_desired
clientMsg.Recursion_available = msg.Recursion_available
}
func main() {
listen := flag.String("addr", ":2055", "Listen address")
flag.Parse()
var addr *net.UDPAddr
var err error
if addr, err = net.ResolveUDPAddr("udp", *listen); err != nil {
log.Fatal(err)
}
var server *net.UDPConn
if server, err = net.ListenUDP("udp", addr); err != nil {
log.Fatal(err)
}
decoders := make(map[string]*netflow.Decoder)
for {
buf := make([]byte, 8192)
var remote *net.UDPAddr
if _, remote, err = server.ReadFromUDP(buf); err != nil {
log.Printf("error reading from %s: %v\n", remote, err)
continue
}
log.Printf("received %d bytes from %s\n", len(buf), remote)
d, found := decoders[remote.String()]
if !found {
s := session.New()
d = netflow.NewDecoder(s)
decoders[remote.String()] = d
}
m, err := d.Read(bytes.NewBuffer(buf))
if err != nil {
log.Println("decoder error:", err)
continue
}
switch p := m.(type) {
case *netflow1.Packet:
netflow1.Dump(p)
case *netflow5.Packet:
netflow5.Dump(p)
case *netflow6.Packet:
netflow6.Dump(p)
case *netflow7.Packet:
netflow7.Dump(p)
case *netflow9.Packet:
netflow9.Dump(p)
case *ipfix.Message:
ipfix.Dump(p)
}
}
}
func (nl *NATlist) Get(srcaddr, dstaddr *net.UDPAddr, cn *UDPConn, header []byte) (c *CachedUDPConn, ok bool, err error) {
nl.Lock()
defer nl.Unlock()
index := srcaddr.String() + dstaddr.String()
_, ok = nl.Conns[index]
if !ok || nl.Conns[index].Expired {
//NAT not exists or expired
delete(nl.Conns, index)
ok = false
conn, err := net.DialUDP("udp", nil, dstaddr)
if err != nil {
return nil, false, err
}
nl.Conns[index] = NewCachedUDPConn(conn)
c, _ = nl.Conns[index]
c.SetTimer()
go Pipeloop(cn, srcaddr, c, header)
} else {
//NAT exists
c, _ = nl.Conns[index]
c.Refresh()
}
err = nil
return
}
func (handler *VMessInboundHandler) handlePacket(conn *net.UDPConn, request *protocol.VMessRequest, packet v2net.Packet, clientAddr *net.UDPAddr) {
ray := handler.vPoint.DispatchToOutbound(packet)
close(ray.InboundInput())
responseKey := md5.Sum(request.RequestKey[:])
responseIV := md5.Sum(request.RequestIV[:])
buffer := bytes.NewBuffer(make([]byte, 0, bufferSize))
response := protocol.NewVMessResponse(request)
responseWriter, err := v2io.NewAesEncryptWriter(responseKey[:], responseIV[:], buffer)
if err != nil {
log.Error("VMessIn: Failed to create encrypt writer: %v", err)
return
}
responseWriter.Write(response[:])
hasData := false
if data, ok := <-ray.InboundOutput(); ok {
hasData = true
responseWriter.Write(data)
}
if hasData {
conn.WriteToUDP(buffer.Bytes(), clientAddr)
log.Info("VMessIn sending %d bytes to %s", len(buffer.Bytes()), clientAddr.String())
}
}
// ProcessPacket decodes and processes a received UDP packet, sending responses
// and forwarding the packet on to other clients as appropriate.
func (server *IPXServer) ProcessPacket(packet []byte, addr *net.UDPAddr) {
var header IPXHeader
if !header.Decode(packet) {
return
}
if header.IsRegistrationPacket() {
server.NewClient(&header, addr)
return
}
srcClient, ok := server.clients[addr.String()]
if !ok {
return
}
// Clients can only send from their own address.
if header.src.addr != srcClient.ipxAddr {
return
}
srcClient.lastReceiveTime = time.Now()
if header.IsBroadcast() {
server.ForwardBroadcastPacket(&header, packet)
} else {
server.ForwardPacket(&header, packet)
}
}
func OpenDoor(raddr *net.UDPAddr) {
OpenCmd, err := RenderTemplate(cfg.OpenCmd, raddr)
if err != nil {
fmt.Printf("open template Error: %s.\n", err.Error())
return
}
CloseCmd, err := RenderTemplate(cfg.CloseCmd, raddr)
if err != nil {
fmt.Printf("close template Error: %s.\n", err.Error())
return
}
fmt.Printf("open door for %s.\n", raddr.String())
err = RunCmd(OpenCmd)
if err != nil {
fmt.Printf("open exec Error: %s.\n", err.Error())
return
}
go func() {
time.Sleep(time.Duration(cfg.Interval) * time.Second)
fmt.Printf("close door for %s.\n", raddr.String())
err := RunCmd(CloseCmd)
if err != nil {
fmt.Printf("close exec Error: %s.\n", err.Error())
return
}
}()
}
func (nl *NATlist) Get(srcaddr *net.UDPAddr, ss *UDPConn) (c *CachedUDPConn, ok bool, err error) {
nl.Lock()
defer nl.Unlock()
index := srcaddr.String()
_, ok = nl.Conns[index]
if !ok {
//NAT not exists or expired
Debug.Printf("new udp conn %v<-->%v\n", srcaddr, ss.LocalAddr())
nl.AliveConns += 1
ok = false
//full cone
addr, _ := net.ResolveUDPAddr("udp", ":0")
conn, err := net.ListenUDP("udp", addr)
if err != nil {
return nil, false, err
}
c = NewCachedUDPConn(conn)
nl.Conns[index] = c
c.SetTimer(index)
go Pipeloop(ss, srcaddr, c)
} else {
//NAT exists
c, _ = nl.Conns[index]
c.Refresh()
}
err = nil
return
}
func (nDB *NetworkDB) reconnectNode() {
nDB.RLock()
if len(nDB.failedNodes) == 0 {
nDB.RUnlock()
return
}
nodes := make([]*node, 0, len(nDB.failedNodes))
for _, n := range nDB.failedNodes {
nodes = append(nodes, n)
}
nDB.RUnlock()
node := nodes[randomOffset(len(nodes))]
addr := net.UDPAddr{IP: node.Addr, Port: int(node.Port)}
if _, err := nDB.memberlist.Join([]string{addr.String()}); err != nil {
return
}
if err := nDB.sendNodeEvent(NodeEventTypeJoin); err != nil {
logrus.Errorf("failed to send node join during reconnect: %v", err)
return
}
// Update all the local table state to a new time to
// force update on the node we are trying to rejoin, just in
// case that node has these in deleting state still. This is
// facilitate fast convergence after recovering from a gossip
// failure.
nDB.updateLocalTableTime()
logrus.Debugf("Initiating bulk sync with node %s after reconnect", node.Name)
nDB.bulkSync([]string{node.Name}, true)
}
func Pipeloop(ss *UDPConn, srcaddr *net.UDPAddr, remote UDP) {
buf := pool.Get().([]byte)
defer pool.Put(buf)
defer nl.Delete(srcaddr.String())
for {
n, raddr, err := remote.ReadFrom(buf)
if err != nil {
if ne, ok := err.(*net.OpError); ok && (ne.Err == syscall.EMFILE || ne.Err == syscall.ENFILE) {
// log too many open file error
// EMFILE is process reaches open file limits, ENFILE is system limit
fmt.Println("[udp]read error:", err)
} else if ne.Err.Error() == "use of closed network connection" {
fmt.Println("[udp]Connection Closing:", remote.LocalAddr())
} else {
fmt.Println("[udp]error reading from:", remote.LocalAddr(), err)
}
return
}
// need improvement here
ReqListLock.RLock()
N, ok := ReqList[raddr.String()]
ReqListLock.RUnlock()
if ok {
ss.WriteToUDP(append(N.Req, buf[:n]...), srcaddr)
} else {
header := ParseHeader(raddr)
ss.WriteToUDP(append(header, buf[:n]...), srcaddr)
}
upTraffic(strconv.Itoa(ss.LocalAddr().(*net.UDPAddr).Port), n, srcaddr.IP.String())
}
}
func (s *Server) UpdateRoomList(roomName string, room *ChatRoom, client *net.UDPAddr) {
roomList := RoomListMessage{}
roomList.Length = 0
if len(room.clients) > 0 {
roomList.Length = uint16(len(room.clients) - 1)
}
roomList.Room = roomName
roomList.Addresses = make([]net.UDPAddr, roomList.Length)
count := 0
for _, other := range room.clients {
if other.address.String() == client.String() {
continue
}
roomList.Addresses[count] = *other.address
count++
}
raw, err := roomList.RawMessage()
if err != nil {
panic(err)
}
message := &Message{raw, ROOM_LIST, false, uint16(len(raw.Data))}
data, err := message.EncodeMessage()
if err != nil {
panic(err)
}
s.Conn.WriteTo(data, client)
serverLogger.Println("Room list sent")
if err != nil {
panic(err)
}
}
func (dhtNode *DhtNode) FindNode(node *KNode) {
var id Id
if node.Id != nil {
id = node.Id.Neighbor()
} else {
id = dhtNode.node.Id.Neighbor()
}
tid := dhtNode.krpc.GenTID()
v := make(map[string]interface{})
v["t"] = fmt.Sprintf("%d", tid)
v["y"] = "q"
v["q"] = "find_node"
args := make(map[string]string)
args["id"] = string(id)
args["target"] = string(GenerateID())
v["a"] = args
data, err := bencode.EncodeString(v)
if err != nil {
dhtNode.log.Fatalln(err)
}
raddr := new(net.UDPAddr)
raddr.IP = node.Ip
raddr.Port = node.Port
err = dhtNode.network.Send([]byte(data), raddr)
if err != nil {
dhtNode.log.Println(err)
}
}
// Called from RX when we are informed of new nodes.
func (dht *DHT) lReceivedNodes(nodes []NodeLocator, originAddr net.UDPAddr) error {
for _, locator := range nodes {
if locator.NodeID == dht.cfg.NodeID {
// Skip references to ourself.
continue
}
if locator.Addr.String() == originAddr.String() {
// Ignore self-promotion.
continue
}
n, wasInserted := dht.neighbourhood.routingTable.Node(locator.NodeID, locator.Addr)
if !wasInserted {
// Duplicate.
continue
}
if dht.needMoreNodes() {
select {
case dht.recurseNodeChan <- locator.NodeID:
default:
// Too many find_node commands queued. The peer has already been added
// to the routing table, so we're not losing any information.
}
}
dht.lRequestMorePeers(n) // TODO: check this
}
return nil
}
// registerUser assumes that a user already was already chec
func registerUser(who *net.UDPAddr, loginMessage *message.Login) error {
alias := loginMessage.Nickname
// Check that he doesn't exist already
var usr *User
usr, isAlreadyRegistered := users[alias]
if isAlreadyRegistered {
if usr.Online {
// That login is already used, choose a different one
sendError(who, "Login already taken, choose a different one")
return errors.New("Login already taken")
}
// Update to new status
usr.Address = who
usr.Online = true
sendPendingMessages(usr)
} else {
// Create a new user
usr = &User{alias,
who,
true,
make([]string, BLOCKED_INITIAL),
make([][]byte, 100),
}
users[usr.Alias] = usr
}
connections[who.String()] = usr
m := message.NewLoginResponse(who.Port)
mm, _ := xml.Marshal(m)
sendMessageToUser(usr, mm)
return nil
}
// Async
//
// Heartbeating serves two purposes: a) keeping NAT paths alive, and
// b) updating a remote peer's knowledge of our address, in the event
// it changes (e.g. because NAT paths expired).
func (conn *LocalConnection) ReceivedHeartbeat(remoteUDPAddr *net.UDPAddr, connUID uint64) {
if remoteUDPAddr == nil || connUID != conn.uid {
return
}
conn.sendAction(func() error {
oldRemoteUDPAddr := conn.remoteUDPAddr
old := conn.receivedHeartbeat
conn.Lock()
conn.remoteUDPAddr = remoteUDPAddr
conn.receivedHeartbeat = true
conn.Unlock()
conn.heartbeatTimeout.Reset(HeartbeatTimeout)
if !old {
if err := conn.sendSimpleProtocolMsg(ProtocolConnectionEstablished); err != nil {
return err
}
}
if oldRemoteUDPAddr == nil {
return conn.sendFastHeartbeats()
} else if oldRemoteUDPAddr.String() != remoteUDPAddr.String() {
log.Println("Peer", conn.remote.FullName(), "moved from", old, "to", remoteUDPAddr)
}
return nil
})
}
func (server *Server) NewClient(remoteAddr *net.UDPAddr, nick string, reqId string) (*Client, int) {
if remoteAddr == nil {
panic("remoteAddr cannot be nil")
}
tmp := server.clients[remoteAddr.String()] // users[clientId]
if tmp != nil {
server.sendResponse("LOGIN", remoteAddr, strconv.Itoa(tmp.GetId())+";"+reqId)
server.sendPastMessages(tmp)
return nil, tmp.GetId()
}
maxId = int(atomic.AddInt32(&server.userId, 1))
position := firstPosition[maxId%4]
server.changesServer = true
server.scoreNewClient(maxId)
return &Client{
maxId,
nick,
0,
remoteAddr,
remoteAddr.String(),
server,
float32(position[0]),
float32(position[1]),
fullLife,
false,
defaultDirection,
0,
false,
false,
0,
0,
0,
}, 0
}
