func initParserMode() {
parserMode = parser.Mode(0)
parserMode |= parser.ParseComments
if *allErrors {
parserMode |= parser.AllErrors
}
}
func GrokDir(dir string) {
pkgs, err := parser.ParseDir(fset, dir, FilterDotGo, parser.Mode(0))
if err != nil {
panic(Sprintf("ERROR <%q> IN DIR <%s>", err, dir))
}
// Find the subdir that follows /pkg/
subdir := AfterFirstDelim(dir, "/pkg/", "")
if len(subdir) == 0 {
panic("dir does not contain /pkg/ plus a tail: " + dir)
}
// Trim trailing /, if any.
if subdir[len(subdir)-1] == '/' {
subdir = subdir[:len(subdir)-1]
}
for pk, pv := range pkgs {
// For dirpkg, remove final piece of subdir
// and replace with stated package name.
// Often these are the same, but not always.
updir := BeforeFinalDelim(subdir, "/", "")
dirpkg := Cond(updir == "", pk, updir+"/"+pk)
Printf("#dirpkg %#v\n", dirpkg)
Printf("#pv %#v\n", pv)
for _, fv := range pv.Files {
for i, dcl := range fv.Decls {
doDecl(dcl, i, dirpkg)
}
}
}
}
func goInitParserMode() {
goParserMode = parser.Mode(0)
if *comments {
goParserMode |= parser.ParseComments
}
goParserMode |= parser.AllErrors
}
func TestBump(t *testing.T) {
fset := token.NewFileSet()
pkgs, err := parser.ParseDir(fset, "testdata/test1", nil, parser.Mode(0))
if err != nil {
t.Fatal(err)
}
conf := Config{
MinorDelta: 1,
}
for _, pkg := range pkgs {
for _, f := range pkg.Files {
vers, err := conf.ProcessNode(fset, f)
if err != nil {
t.Errorf("got error: %s", err)
}
if _, ok := vers["version"]; !ok {
t.Errorf("should detect `version`")
}
if _, ok := vers["VERSION"]; !ok {
t.Errorf("should detect `VERSION`")
}
if vers["version"] != "1.1.0" {
t.Errorf("expected %v: got %v", "1.1.0", vers["version"])
}
if vers["VERSION"] != "2.1.0" {
t.Errorf("expected %v: got %v", "2.1.0", vers["VERSION"])
}
}
}
}
// fastQueryPos parses the position string and returns a queryPos.
// It parses only a single file and does not run the type checker.
func fastQueryPos(ctxt *build.Context, pos string) (*queryPos, error) {
filename, startOffset, endOffset, err := parsePos(pos)
if err != nil {
return nil, err
}
// Parse the file, opening it the file via the build.Context
// so that we observe the effects of the -modified flag.
fset := token.NewFileSet()
cwd, _ := os.Getwd()
f, err := buildutil.ParseFile(fset, ctxt, nil, cwd, filename, parser.Mode(0))
// ParseFile usually returns a partial file along with an error.
// Only fail if there is no file.
if f == nil {
return nil, err
}
if !f.Pos().IsValid() {
return nil, fmt.Errorf("%s is not a Go source file", filename)
}
start, end, err := fileOffsetToPos(fset.File(f.Pos()), startOffset, endOffset)
if err != nil {
return nil, err
}
path, exact := astutil.PathEnclosingInterval(f, start, end)
if path == nil {
return nil, fmt.Errorf("no syntax here")
}
return &queryPos{fset, start, end, path, exact, nil}, nil
}
func initParserMode() {
parserMode = parser.Mode(0)
if *comments {
parserMode |= parser.ParseComments
}
if *allErrors {
parserMode |= parser.SpuriousErrors
}
}
// importPackages includes packages defined on external file into main file
func (s *Session) importPackages(src []byte) error {
astf, err := parser.ParseFile(s.Fset, "", src, parser.Mode(0))
if err != nil {
return err
}
for _, imt := range astf.Imports {
debugf("import package: %s", imt.Path.Value)
actionImport(s, imt.Path.Value)
}
return nil
}
// applyAroundAdvice uses code from gofmt to wrap any after advice
// essentially this is the same stuff you could do w/the cmdline tool,
// gofmt
//
// FIXME - mv to CallExpr
//
// looks for call joinpoints && provides around advice capability
//
// this is currently a hack to support deferpanic's http lib
func (w *Weave) applyAroundAdvice(fname string) string {
stuff := fileAsStr(fname)
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if aspect.advize.around != "" {
pk := aspect.pointkut
around_advice := aspect.advize.around
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, stuff, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
// needs match groups
// wildcards of d,s...etc.
p := parseExpr(pk.def)
val := parseExpr(around_advice)
file = rewriteFile2(p, val, file)
buf := new(bytes.Buffer)
err = format.Node(buf, fset, file)
if err != nil {
w.flog.Println("Failed to format post-replace source: %v", err)
}
actual := buf.String()
w.writeOut(fname, actual)
stuff = actual
for t := 0; t < len(aspect.importz); t++ {
importsNeeded = append(importsNeeded, aspect.importz[t])
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice
stuff = w.writeMissingImports(fname, stuff, importsNeeded)
}
return stuff
}
// findPackageMember returns the type and position of the declaration of
// pkg.member by loading and parsing the files of that package.
// srcdir is the directory in which the import appears.
func findPackageMember(ctxt *build.Context, fset *token.FileSet, srcdir, pkg, member string) (token.Token, token.Pos, error) {
bp, err := ctxt.Import(pkg, srcdir, 0)
if err != nil {
return 0, token.NoPos, err // no files for package
}
// TODO(adonovan): opt: parallelize.
for _, fname := range bp.GoFiles {
filename := filepath.Join(bp.Dir, fname)
// Parse the file, opening it the file via the build.Context
// so that we observe the effects of the -modified flag.
f, _ := buildutil.ParseFile(fset, ctxt, nil, ".", filename, parser.Mode(0))
if f == nil {
continue
}
// Find a package-level decl called 'member'.
for _, decl := range f.Decls {
switch decl := decl.(type) {
case *ast.GenDecl:
for _, spec := range decl.Specs {
switch spec := spec.(type) {
case *ast.ValueSpec:
// const or var
for _, id := range spec.Names {
if id.Name == member {
return decl.Tok, id.Pos(), nil
}
}
case *ast.TypeSpec:
if spec.Name.Name == member {
return token.TYPE, spec.Name.Pos(), nil
}
case *ast.AliasSpec:
if spec.Name.Name == member {
return decl.Tok, spec.Name.Pos(), nil
}
}
}
case *ast.FuncDecl:
if decl.Recv == nil && decl.Name.Name == member {
return token.FUNC, decl.Name.Pos(), nil
}
}
}
}
return 0, token.NoPos, fmt.Errorf("couldn't find declaration of %s in %q", member, pkg)
}
// applyGlobalAdvice applies any global scoped advice
// if advice has already been placed in this pkg than we skip
// no support for sub-pkgs yet
// FIXME
func (w *Weave) applyGlobalAdvice(fname string, stuff string) string {
if w.appliedGlobal {
return stuff
}
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if aspect.pointkut.def != "*" {
continue
}
before_advice := aspect.advize.before
after_advice := aspect.advize.after
w.appliedGlobal = true
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
// endOfImport returns the line after the import statement
// used to add global advice
// just a guess here - doubt this is ordered
ilen := len(file.Imports)
s := file.Imports[ilen-1].End()
ei := fset.Position(s).Line + 1
if before_advice != "" {
rout = w.writeAtLine(fname, ei, before_advice)
}
if after_advice != "" {
rout = w.writeAtLine(fname, ei, after_advice)
}
}
if len(importsNeeded) > 0 {
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
func (s *Session) reset() error {
source, err := s.source(false)
if err != nil {
return err
}
file, err := parser.ParseFile(s.Fset, "gore_session.go", source, parser.Mode(0))
if err != nil {
return err
}
s.File = file
s.mainBody = s.mainFunc().Body
return nil
}
func TestDeadCode(t *testing.T) {
// We'll use dead code detection to verify the CFG.
fset := token.NewFileSet()
f, err := parser.ParseFile(fset, "dummy.go", src, parser.Mode(0))
if err != nil {
t.Fatal(err)
}
for _, decl := range f.Decls {
if decl, ok := decl.(*ast.FuncDecl); ok {
g := New(decl.Body, mayReturn)
// Mark blocks reachable from entry.
live := make(map[*Block]bool)
var visit func(*Block)
visit = func(b *Block) {
if !live[b] {
live[b] = true
for _, succ := range b.Succs {
visit(succ)
}
}
}
visit(g.Blocks[0])
// Print statements in unreachable blocks
// (in order determined by builder).
var buf bytes.Buffer
for _, b := range g.Blocks {
if !live[b] {
for _, n := range b.Nodes {
fmt.Fprintf(&buf, "\t%s\n", formatNode(fset, n))
}
}
}
// Check that the result contains "dead" at least once but not "live".
if !bytes.Contains(buf.Bytes(), []byte("dead")) ||
bytes.Contains(buf.Bytes(), []byte("live")) {
t.Errorf("unexpected dead statements in function %s:\n%s",
decl.Name.Name,
&buf)
t.Logf("control flow graph:\n%s", g.Format(fset))
}
}
}
}
// importFile adds external golang file to goRun target to use its function
func (s *Session) importFile(src []byte) error {
// Don't need to same directory
tmp, err := ioutil.TempFile(filepath.Dir(s.FilePath), "gore_extarnal_")
if err != nil {
return err
}
ext := tmp.Name() + ".go"
f, err := parser.ParseFile(s.Fset, ext, src, parser.Mode(0))
if err != nil {
return err
}
// rewrite to package main
f.Name.Name = "main"
// remove func main()
for i, decl := range f.Decls {
if funcDecl, ok := decl.(*ast.FuncDecl); ok {
if isNamedIdent(funcDecl.Name, "main") {
f.Decls = append(f.Decls[0:i], f.Decls[i+1:]...)
// main() removed from this file, we may have to
// remove some unsed import's
quickfix.QuickFix(s.Fset, []*ast.File{f})
break
}
}
}
out, err := os.Create(ext)
if err != nil {
return err
}
defer out.Close()
err = printer.Fprint(out, s.Fset, f)
if err != nil {
return err
}
debugf("import file: %s", ext)
s.ExtraFilePaths = append(s.ExtraFilePaths, ext)
s.ExtraFiles = append(s.ExtraFiles, f)
return nil
}
func doDir(name string) {
notests := func(info os.FileInfo) bool {
if !info.IsDir() && strings.HasSuffix(info.Name(), ".go") &&
(!strings.HasSuffix(info.Name(), "_test.go") || *includeTests) {
return true
}
return false
}
fs := token.NewFileSet()
pkgs, err := parser.ParseDir(fs, name, notests, parser.Mode(0))
if err != nil {
errorf("%s", err)
return
}
for _, pkg := range pkgs {
doPackage(fs, pkg)
}
}
// fixImports formats and adjusts imports for the current AST.
func (s *Session) fixImports() error {
var buf bytes.Buffer
err := printer.Fprint(&buf, s.Fset, s.File)
if err != nil {
return err
}
formatted, err := imports.Process("", buf.Bytes(), nil)
if err != nil {
return err
}
s.File, err = parser.ParseFile(s.Fset, "", formatted, parser.Mode(0))
if err != nil {
return err
}
s.mainBody = s.mainFunc().Body
return nil
}
func NewSession() (*Session, error) {
var err error
s := &Session{
Fset: token.NewFileSet(),
Types: &types.Config{
Packages: make(map[string]*types.Package),
},
}
s.FilePath, err = tempFile()
if err != nil {
return nil, err
}
var initialSource string
for _, pp := range printerPkgs {
_, err := types.DefaultImport(s.Types.Packages, pp.path)
if err == nil {
initialSource = fmt.Sprintf(initialSourceTemplate, pp.path, pp.code)
break
}
debugf("could not import %q: %s", pp.path, err)
}
if initialSource == "" {
return nil, fmt.Errorf(`Could not load pretty printing package (even "fmt"; something is wrong)`)
}
s.File, err = parser.ParseFile(s.Fset, "gore_session.go", initialSource, parser.Mode(0))
if err != nil {
return nil, err
}
s.mainBody = s.mainFunc().Body
return s, nil
}
// NewSession initiates a new REPL
func NewSession() (*Session, error) {
s := &Session{
Fset: token.NewFileSet(),
Types: &types.Config{
Importer: importer.Default(),
},
}
var err error
s.FilePath, err = tempFile()
if err != nil {
return nil, err
}
var initialSource string
for _, pp := range printerPkgs {
_, err := importer.Default().Import(pp.path)
if err == nil {
initialSource = fmt.Sprintf(initialSourceTemplate, pp.path, pp.code)
break
}
debugf("could not import %q: %s", pp.path, err)
}
if initialSource == "" {
return nil, fmt.Errorf("Could not load pretty printing package")
}
s.File, err = parser.ParseFile(s.Fset, "gophernotes_session.go", initialSource, parser.Mode(0))
if err != nil {
return nil, err
}
s.mainBody = s.mainFunc().Body
return s, nil
}
func (s *Session) evalStmt(in string) error {
src := fmt.Sprintf("package P; func F() { %s }", in)
f, err := parser.ParseFile(s.Fset, "stmt.go", src, parser.Mode(0))
if err != nil {
return err
}
enclosingFunc := f.Scope.Lookup("F").Decl.(*ast.FuncDecl)
stmts := enclosingFunc.Body.List
if len(stmts) > 0 {
debugf("evalStmt :: %s", showNode(s.Fset, stmts))
lastStmt := stmts[len(stmts)-1]
// print last assigned/defined values
if assign, ok := lastStmt.(*ast.AssignStmt); ok {
vs := []ast.Expr{}
for _, v := range assign.Lhs {
if !isNamedIdent(v, "_") {
vs = append(vs, v)
}
}
if len(vs) > 0 {
printLastValues := &ast.ExprStmt{
X: &ast.CallExpr{
Fun: ast.NewIdent(printerName),
Args: vs,
},
}
stmts = append(stmts, printLastValues)
}
}
}
s.appendStatements(stmts...)
return nil
}
// applySetJP applies any advice for set joinpoints
func (w *Weave) applySetJP(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if !aspect.pointkut.isSet() {
continue
}
pk := aspect.pointkut.def
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
linecnt := 0
for _, decl := range file.Decls {
fn, ok := decl.(*ast.FuncDecl)
if !ok {
continue
}
for x := 0; x < len(fn.Body.List); x++ {
begin := 0
after := 0
as, ok2 := fn.Body.List[x].(*ast.SendStmt)
if !ok2 {
// look for assignment
//*ast.AssignStmt
as, ok3 := fn.Body.List[x].(*ast.AssignStmt)
if !ok3 {
continue
}
// no multiple-return support yet
blah := as.Lhs[0].(*ast.Ident).Name
if pk != blah {
continue
}
begin = fset.Position(as.Pos()).Line - 1
after = fset.Position(as.End()).Line + 1
} else {
// look for channel
as3, ok3 := as.Chan.(*ast.Ident)
if !ok3 {
continue
}
if as3.Name != pk {
continue
}
begin = fset.Position(as.Pos()).Line - 1
after = fset.Position(as.End()).Line + 1
}
// figure out type
// begin := fset.Position(as.Pos()).Line - 1
// after := fset.Position(as.End()).Line + 1
before_advice := aspect.advize.before
after_advice := aspect.advize.after
if before_advice != "" {
rout = w.writeAtLine(fname, begin+linecnt, before_advice)
linecnt += strings.Count(before_advice, "\n") + 1
}
if after_advice != "" {
rout = w.writeAtLine(fname, after+linecnt-1, after_advice)
linecnt += strings.Count(after_advice, "\n") + 1
}
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
// parse parses src, which was read from filename,
// as a Go source file or statement list.
func parse(fset *token.FileSet, filename string, src []byte, opt *Options) (*ast.File, func(orig, src []byte) []byte, error) {
parserMode := parser.Mode(0)
if opt.Comments {
parserMode |= parser.ParseComments
}
if opt.AllErrors {
parserMode |= parser.AllErrors
}
// Try as whole source file.
file, err := parser.ParseFile(fset, filename, src, parserMode)
if err == nil {
return file, nil, nil
}
// If the error is that the source file didn't begin with a
// package line and we accept fragmented input, fall through to
// try as a source fragment. Stop and return on any other error.
if !opt.Fragment || !strings.Contains(err.Error(), "expected 'package'") {
return nil, nil, err
}
// If this is a declaration list, make it a source file
// by inserting a package clause.
// Insert using a ;, not a newline, so that the line numbers
// in psrc match the ones in src.
psrc := append([]byte("package main;"), src...)
file, err = parser.ParseFile(fset, filename, psrc, parserMode)
if err == nil {
// If a main function exists, we will assume this is a main
// package and leave the file.
if containsMainFunc(file) {
return file, nil, nil
}
adjust := func(orig, src []byte) []byte {
// Remove the package clause.
// Gofmt has turned the ; into a \n.
src = src[len("package main\n"):]
return matchSpace(orig, src)
}
return file, adjust, nil
}
// If the error is that the source file didn't begin with a
// declaration, fall through to try as a statement list.
// Stop and return on any other error.
if !strings.Contains(err.Error(), "expected declaration") {
return nil, nil, err
}
// If this is a statement list, make it a source file
// by inserting a package clause and turning the list
// into a function body. This handles expressions too.
// Insert using a ;, not a newline, so that the line numbers
// in fsrc match the ones in src.
fsrc := append(append([]byte("package p; func _() {"), src...), '}')
file, err = parser.ParseFile(fset, filename, fsrc, parserMode)
if err == nil {
adjust := func(orig, src []byte) []byte {
// Remove the wrapping.
// Gofmt has turned the ; into a \n\n.
src = src[len("package p\n\nfunc _() {"):]
src = src[:len(src)-len("}\n")]
// Gofmt has also indented the function body one level.
// Remove that indent.
src = bytes.Replace(src, []byte("\n\t"), []byte("\n"), -1)
return matchSpace(orig, src)
}
return file, adjust, nil
}
// Failed, and out of options.
return nil, nil, err
}
// applyCallAdvice applies call advice before/after a call
// around advice is currently hacked in via applyAroundAdvice
func (w *Weave) applyCallAdvice(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if aspect.pointkut.kind != 1 {
continue
}
linecnt := 0
pk := aspect.pointkut.def
before_advice := aspect.advize.before
after_advice := aspect.advize.after
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
// look for call expressions - call joinpoints
// bend keeps track of tailing binaryExprs
// if a call-expression's end is not > then we use this
lastbinstart := 0
lastbinend := 0
ast.Inspect(file, func(n ast.Node) bool {
switch stmt := n.(type) {
case *ast.CompositeLit:
// log.Printf("found a composite lit\n")
lbs := fset.Position(stmt.Lbrace).Line
lbe := fset.Position(stmt.Rbrace).Line
if lbs > lastbinstart {
lastbinstart = lbs
}
if lbe > lastbinend {
lastbinend = lbe
}
case *ast.BinaryExpr:
// child nodes traversed in DFS - so we want the max
// it's ok when newer nodes re-write this out of scope
lbs := fset.Position(stmt.X.Pos()).Line
lbe := fset.Position(stmt.Y.Pos()).Line
if lbs > lastbinstart {
lastbinstart = lbs
}
if lbe > lastbinend {
lastbinend = lbe
}
// log.Printf("last bin start %d, last bin end %d", lastbinstart, lastbinend)
case *ast.CallExpr:
var name string
switch x := stmt.Fun.(type) {
case *ast.Ident:
name = x.Name
case *ast.SelectorExpr:
name = x.Sel.Name
default:
name = "WRONG"
}
pk = strings.Split(pk, "(")[0]
// fixme - hack - we need support for identifying call
// expressions w/pkgs
if strings.Contains(pk, ".") {
pk = strings.Split(pk, ".")[1]
}
// are we part of a bigger expression?
// if so grab our lines so we don't erroneously set them
if (string(name) != pk) && (len(stmt.Args) > 1) {
// log.Printf("found comma..")
// child nodes traversed in DFS - so we want the max
// it's ok when newer nodes re-write this out of scope
lbs := fset.Position(stmt.Lparen).Line
lbe := fset.Position(stmt.Rparen).Line
// log.Printf("lbs: %d, lbe: %d\n", lbs, lbe)
if lbs > 0 {
//lastbinstart {
lastbinstart = lbs
}
if lbe > lastbinend {
lastbinend = lbe
}
}
if string(name) == pk {
begin := fset.Position(stmt.Lparen).Line
end := fset.Position(stmt.Rparen).Line
// log.Printf("found expression on line %d\n", begin)
//log.Printf("lbs: %d, lbe: %d\n", lbs, lbe)
// adjust begin
if begin > lastbinend {
// log.Printf("using this funcs start %d", begin)
} else {
if lastbinstart < begin {
begin = lastbinstart
}
// log.Printf("using binexps' start %d", begin)
}
if end > lastbinend {
// log.Printf("using this funcs begin %d", begin)
} else {
if lastbinstart < begin {
begin = lastbinstart
}
// log.Printf("using binexps' start %d", begin)
}
// adjust end
if lastbinend > end {
end = lastbinend
}
if before_advice != "" {
rout = w.writeAtLine(fname, begin+linecnt-1, before_advice)
// log.Println(rout)
// log.Printf("writing at line %d", begin+linecnt-1)
linecnt += strings.Count(before_advice, "\n") + 1
}
if after_advice != "" {
rout = w.writeAtLine(fname, end+linecnt, after_advice)
// log.Println(rout)
// log.Printf("writing at line %d", end+linecnt)
linecnt += strings.Count(after_advice, "\n") + 1
}
for t := 0; t < len(aspect.importz); t++ {
importsNeeded = append(importsNeeded, aspect.importz[t])
}
}
}
return true
})
}
if len(importsNeeded) > 0 {
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
func (s *Session) evalStmt(in string, noPrint bool) error {
src := fmt.Sprintf("package P; func F() { %s }", in)
f, err := parser.ParseFile(s.Fset, "stmt.go", src, parser.Mode(0))
if err != nil {
debugf("stmt :: err = %s", err)
// try to import this as a proxy function and correct for any imports
appendForImport := `package main
`
f, err := os.Create(string(filepath.Dir(s.FilePath)) + "/func_proxy.go")
if err != nil {
return err
}
_, err = f.Write([]byte(appendForImport + in))
if err != nil {
return err
}
f.Close()
b := new(bytes.Buffer)
cmd := exec.Command("goimports", "-w", string(filepath.Dir(s.FilePath))+"/func_proxy.go")
cmd.Stdout = b
cmd.Stderr = b
err = cmd.Run()
if err != nil {
err = errors.New(b.String())
return err
}
functproxy, err := ioutil.ReadFile(string(filepath.Dir(s.FilePath)) + "/func_proxy.go")
if err != nil {
return err
}
if err = s.importFile(functproxy); err != nil {
errorf("%s", err.Error())
if _, ok := err.(scanner.ErrorList); ok {
return ErrContinue
}
}
}
enclosingFunc := f.Scope.Lookup("F").Decl.(*ast.FuncDecl)
stmts := enclosingFunc.Body.List
if len(stmts) > 0 {
debugf("evalStmt :: %s", showNode(s.Fset, stmts))
lastStmt := stmts[len(stmts)-1]
// print last assigned/defined values
if !noPrint {
if assign, ok := lastStmt.(*ast.AssignStmt); ok {
vs := []ast.Expr{}
for _, v := range assign.Lhs {
if !isNamedIdent(v, "_") {
vs = append(vs, v)
}
}
if len(vs) > 0 {
printLastValues := &ast.ExprStmt{
X: &ast.CallExpr{
Fun: ast.NewIdent(printerName),
Args: vs,
},
}
stmts = append(stmts, printLastValues)
}
}
}
}
s.appendStatements(stmts...)
return nil
}
// applyGetJP applies any advice for get joinpoints
func (w *Weave) applyGetJP(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if !aspect.pointkut.isGet() {
continue
}
pk := aspect.pointkut.def
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
linecnt := 0
for _, decl := range file.Decls {
fn, ok := decl.(*ast.FuncDecl)
if !ok {
continue
}
for x := 0; x < len(fn.Body.List); x++ {
as, ok2 := fn.Body.List[x].(*ast.ExprStmt)
if !ok2 {
continue
}
blah, ok3 := as.X.(*ast.CallExpr)
if !ok3 {
continue
}
// can either be a unary || a ident (so far)
fn2, ok4 := blah.Args[0].(*ast.UnaryExpr)
if !ok4 {
// look for ident
fn3, ok5 := blah.Args[0].(*ast.Ident)
if !ok5 {
continue
}
if pk != fn3.Name {
continue
}
} else {
// look for channel
blah2, ok4 := fn2.X.(*ast.Ident)
if !ok4 {
continue
}
if pk != blah2.Name {
continue
}
}
begin := fset.Position(as.Pos()).Line - 1
after := fset.Position(as.End()).Line + 1
before_advice := aspect.advize.before
after_advice := aspect.advize.after
if before_advice != "" {
rout = w.writeAtLine(fname, begin+linecnt, before_advice)
linecnt += strings.Count(before_advice, "\n") + 1
}
if after_advice != "" {
rout = w.writeAtLine(fname, after+linecnt-1, after_advice)
linecnt += strings.Count(after_advice, "\n") + 1
}
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
// applyWithinJP applies any advice for within joinpoints
// right now this expects both 'before && after'
func (w *Weave) applyWithinJP(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if !aspect.pointkut.isWithin() {
continue
}
pk := aspect.pointkut.def
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
linecnt := 0
// look for function declarations - ala look for execution
// joinpoints
for _, decl := range file.Decls {
fn, ok := decl.(*ast.FuncDecl)
if !ok {
continue
}
fpk := strings.Split(pk, "(")[0]
// if function name missing --> wildcard
if fpk == "" {
fpk = fn.Name.Name
}
if fn.Name.Name == fpk && containArgs(pk, fn.Type.Params.List) {
wb := WithinBlock{
name: fn.Name.Name,
fname: fname,
stmts: fn.Body.List,
linecnt: linecnt,
importsNeeded: importsNeeded,
aspect: aspect,
fset: fset,
}
rout, linecnt, importsNeeded = wb.iterateBodyStatements(w)
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
// CreateTestMainPackage creates and returns a synthetic "testmain"
// package for the specified package if it defines tests, benchmarks or
// executable examples, or nil otherwise. The new package is named
// "main" and provides a function named "main" that runs the tests,
// similar to the one that would be created by the 'go test' tool.
//
// Subsequent calls to prog.AllPackages include the new package.
// The package pkg must belong to the program prog.
func (prog *Program) CreateTestMainPackage(pkg *Package) *Package {
if pkg.Prog != prog {
log.Fatal("Package does not belong to Program")
}
// Template data
var data struct {
Pkg *Package
Tests, Benchmarks, Examples []*Function
Main *Function
Go18 bool
}
data.Pkg = pkg
// Enumerate tests.
data.Tests, data.Benchmarks, data.Examples, data.Main = FindTests(pkg)
if data.Main == nil &&
data.Tests == nil && data.Benchmarks == nil && data.Examples == nil {
return nil
}
// Synthesize source for testmain package.
path := pkg.Pkg.Path() + "$testmain"
tmpl := testmainTmpl
if testingPkg := prog.ImportedPackage("testing"); testingPkg != nil {
// In Go 1.8, testing.MainStart's first argument is an interface, not a func.
data.Go18 = types.IsInterface(testingPkg.Func("MainStart").Signature.Params().At(0).Type())
} else {
// The program does not import "testing", but FindTests
// returned non-nil, which must mean there were Examples
// but no Test, Benchmark, or TestMain functions.
// We'll simply call them from testmain.main; this will
// ensure they don't panic, but will not check any
// "Output:" comments.
// (We should not execute an Example that has no
// "Output:" comment, but it's impossible to tell here.)
tmpl = examplesOnlyTmpl
}
var buf bytes.Buffer
if err := tmpl.Execute(&buf, data); err != nil {
log.Fatalf("internal error expanding template for %s: %v", path, err)
}
if false { // debugging
fmt.Fprintln(os.Stderr, buf.String())
}
// Parse and type-check the testmain package.
f, err := parser.ParseFile(prog.Fset, path+".go", &buf, parser.Mode(0))
if err != nil {
log.Fatalf("internal error parsing %s: %v", path, err)
}
conf := types.Config{
DisableUnusedImportCheck: true,
Importer: importer{pkg},
}
files := []*ast.File{f}
info := &types.Info{
Types: make(map[ast.Expr]types.TypeAndValue),
Defs: make(map[*ast.Ident]types.Object),
Uses: make(map[*ast.Ident]types.Object),
Implicits: make(map[ast.Node]types.Object),
Scopes: make(map[ast.Node]*types.Scope),
Selections: make(map[*ast.SelectorExpr]*types.Selection),
}
testmainPkg, err := conf.Check(path, prog.Fset, files, info)
if err != nil {
log.Fatalf("internal error type-checking %s: %v", path, err)
}
// Create and build SSA code.
testmain := prog.CreatePackage(testmainPkg, files, info, false)
testmain.SetDebugMode(false)
testmain.Build()
testmain.Func("main").Synthetic = "test main function"
testmain.Func("init").Synthetic = "package initializer"
return testmain
}
// applyExecutionJP applies any advice for execution joinpoints
func (w *Weave) applyExecutionJP(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if aspect.pointkut.kind != 2 {
continue
}
pk := aspect.pointkut.def
before_advice := aspect.advize.before
after_advice := aspect.advize.after
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
linecnt := 0
// look for function declarations - ala look for execution
// joinpoints
for _, decl := range file.Decls {
fn, ok := decl.(*ast.FuncDecl)
if !ok {
continue
}
fpk := strings.Split(pk, "(")[0]
// if function name missing --> wildcard
if fpk == "" {
fpk = fn.Name.Name
}
if fn.Name.Name == fpk && containArgs(pk, fn.Type.Params.List) {
// begin line
begin := fset.Position(fn.Body.Lbrace).Line
after := fset.Position(fn.Body.Rbrace).Line
// until this is refactored - any lines we add in our
// advice need to be accounted for w/begin
if before_advice != "" {
rout = w.writeAtLine(fname, begin+linecnt, before_advice)
linecnt += strings.Count(before_advice, "\n") + 1
}
if after_advice != "" {
if fn.Type.Results != nil {
lcnt := strings.Count(after_advice, "\n") + 1
rout = w.writeAtLine(fname, after+linecnt-1-lcnt, after_advice)
} else {
rout = w.writeAtLine(fname, after+linecnt-1, after_advice)
}
linecnt += strings.Count(after_advice, "\n") + 1
}
for t := 0; t < len(aspect.importz); t++ {
importsNeeded = append(importsNeeded, aspect.importz[t])
}
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice applyExecutionJP
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
// applyDeclarationJP applies any advice for set joinpoints
// currently expects a channel type
// need some extra help here to be agnostic
// maybe some helper functions that determine what type it is and
// associated meta-data about it
//
// this is currently a TEST - it only works for specific channels at the
// moment
func (w *Weave) applyDeclarationJP(fname string, stuff string) string {
rout := stuff
importsNeeded := []string{}
for i := 0; i < len(w.aspects); i++ {
aspect := w.aspects[i]
if !aspect.pointkut.isDeclaration() {
continue
}
pk := aspect.pointkut.def
fset := token.NewFileSet()
file, err := parser.ParseFile(fset, fname, rout, parser.Mode(0))
if err != nil {
w.flog.Println("Failed to parse source: %s", err.Error())
}
linecnt := 0
for _, decl := range file.Decls {
fn, ok := decl.(*ast.FuncDecl)
if !ok {
continue
}
for x := 0; x < len(fn.Body.List); x++ {
as, ok2 := fn.Body.List[x].(*ast.AssignStmt)
if !ok2 {
continue
}
// ll-cool-j
blah := as.Lhs[0].(*ast.Ident).Name
if pk != blah {
continue
}
// figure out type
// ll-cool-j once again
if len(as.Rhs[0].(*ast.CallExpr).Args) == 2 {
_, k := (as.Rhs[0].(*ast.CallExpr).Args[0]).(*ast.ChanType)
if !k {
continue
}
r2, k2 := (as.Rhs[0].(*ast.CallExpr).Args[1]).(*ast.BasicLit)
if !k2 {
continue
}
avar := AbstractVar{
Kind: "channel",
Val: r2.Value,
}
begin := fset.Position(as.Pos()).Line - 1
after := fset.Position(as.End()).Line + 1
// this needs to do var subsitution like we do for
// within advice
//
// before_advice := formatAdvice(aspect.advize.before, mName)
// after_advice := formatAdvice(aspect.advize.after, mName)
before_advice := aspect.advize.before
after_advice := aspect.advize.after
if before_advice != "" {
rout = w.writeAtLine(fname, begin+linecnt, before_advice)
linecnt += strings.Count(before_advice, "\n") + 1
}
if after_advice != "" {
rout = w.writeAtLine(fname, after+linecnt-1, after_advice)
linecnt += strings.Count(after_advice, "\n") + 1
}
mAvars = append(mAvars, avar)
}
}
}
}
if len(importsNeeded) > 0 {
// add any imports for this piece of advice
rout = w.writeMissingImports(fname, rout, importsNeeded)
}
return rout
}
