func (raw *data) parent(subsystem string) (string, error) {
initPath, err := cgroups.GetInitCgroupDir(subsystem)
if err != nil {
return "", err
}
return filepath.Join(raw.root, subsystem, initPath), nil
}
func getFreezerPath(c *cgroups.Cgroup) (string, error) {
mountpoint, err := cgroups.FindCgroupMountpoint("freezer")
if err != nil {
return "", err
}
initPath, err := cgroups.GetInitCgroupDir("freezer")
if err != nil {
return "", err
}
return filepath.Join(mountpoint, initPath, fmt.Sprintf("%s-%s", c.Parent, c.Name)), nil
}
func Apply(c *cgroups.Cgroup, pid int) (cgroups.ActiveCgroup, error) {
var (
unitName = c.Parent + "-" + c.Name + ".scope"
slice = "system.slice"
properties []systemd1.Property
cpuArgs []cgroupArg
cpusetArgs []cgroupArg
memoryArgs []cgroupArg
res systemdCgroup
)
// First set up things not supported by systemd
// -1 disables memorySwap
if c.MemorySwap >= 0 && (c.Memory != 0 || c.MemorySwap > 0) {
memorySwap := c.MemorySwap
if memorySwap == 0 {
// By default, MemorySwap is set to twice the size of RAM.
memorySwap = c.Memory * 2
}
memoryArgs = append(memoryArgs, cgroupArg{"memory.memsw.limit_in_bytes", strconv.FormatInt(memorySwap, 10)})
}
if c.CpusetCpus != "" {
cpusetArgs = append(cpusetArgs, cgroupArg{"cpuset.cpus", c.CpusetCpus})
}
if c.Slice != "" {
slice = c.Slice
}
properties = append(properties,
systemd1.Property{"Slice", dbus.MakeVariant(slice)},
systemd1.Property{"Description", dbus.MakeVariant("docker container " + c.Name)},
systemd1.Property{"PIDs", dbus.MakeVariant([]uint32{uint32(pid)})},
)
if !c.DeviceAccess {
properties = append(properties,
systemd1.Property{"DevicePolicy", dbus.MakeVariant("strict")},
systemd1.Property{"DeviceAllow", dbus.MakeVariant([]DeviceAllow{
{"/dev/null", "rwm"},
{"/dev/zero", "rwm"},
{"/dev/full", "rwm"},
{"/dev/random", "rwm"},
{"/dev/urandom", "rwm"},
{"/dev/tty", "rwm"},
{"/dev/console", "rwm"},
{"/dev/tty0", "rwm"},
{"/dev/tty1", "rwm"},
{"/dev/pts/ptmx", "rwm"},
// There is no way to add /dev/pts/* here atm, so we hack this manually below
// /dev/pts/* (how to add this?)
// Same with tuntap, which doesn't exist as a node most of the time
})})
}
// Always enable accounting, this gets us the same behaviour as the fs implementation,
// plus the kernel has some problems with joining the memory cgroup at a later time.
properties = append(properties,
systemd1.Property{"MemoryAccounting", dbus.MakeVariant(true)},
systemd1.Property{"CPUAccounting", dbus.MakeVariant(true)},
systemd1.Property{"BlockIOAccounting", dbus.MakeVariant(true)})
if c.Memory != 0 {
properties = append(properties,
systemd1.Property{"MemoryLimit", dbus.MakeVariant(uint64(c.Memory))})
}
// TODO: MemoryReservation and MemorySwap not available in systemd
if c.CpuShares != 0 {
properties = append(properties,
systemd1.Property{"CPUShares", dbus.MakeVariant(uint64(c.CpuShares))})
}
if _, err := theConn.StartTransientUnit(unitName, "replace", properties...); err != nil {
return nil, err
}
// To work around the lack of /dev/pts/* support above we need to manually add these
// so, ask systemd for the cgroup used
props, err := theConn.GetUnitTypeProperties(unitName, getIfaceForUnit(unitName))
if err != nil {
return nil, err
}
cgroup := props["ControlGroup"].(string)
if !c.DeviceAccess {
mountpoint, err := cgroups.FindCgroupMountpoint("devices")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
// /dev/pts/*
if err := ioutil.WriteFile(filepath.Join(path, "devices.allow"), []byte("c 136:* rwm"), 0700); err != nil {
return nil, err
}
// tuntap
if err := ioutil.WriteFile(filepath.Join(path, "devices.allow"), []byte("c 10:200 rwm"), 0700); err != nil {
return nil, err
}
}
if len(cpuArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("cpu")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range cpuArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
if len(memoryArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("memory")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range memoryArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
if len(cpusetArgs) != 0 {
// systemd does not atm set up the cpuset controller, so we must manually
// join it. Additionally that is a very finicky controller where each
// level must have a full setup as the default for a new directory is "no cpus",
// so we avoid using any hierarchies here, creating a toplevel directory.
mountpoint, err := cgroups.FindCgroupMountpoint("cpuset")
if err != nil {
return nil, err
}
initPath, err := cgroups.GetInitCgroupDir("cpuset")
if err != nil {
return nil, err
}
rootPath := filepath.Join(mountpoint, initPath)
path := filepath.Join(mountpoint, initPath, c.Parent+"-"+c.Name)
res.cleanupDirs = append(res.cleanupDirs, path)
if err := os.MkdirAll(path, 0755); err != nil && !os.IsExist(err) {
return nil, err
}
foundCpus := false
foundMems := false
for _, arg := range cpusetArgs {
if arg.File == "cpuset.cpus" {
foundCpus = true
}
if arg.File == "cpuset.mems" {
foundMems = true
}
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundCpus {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.cpus"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.cpus"), s, 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundMems {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.mems"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.mems"), s, 0700); err != nil {
return nil, err
}
}
if err := ioutil.WriteFile(filepath.Join(path, "cgroup.procs"), []byte(strconv.Itoa(pid)), 0700); err != nil {
return nil, err
}
}
return &res, nil
}
func Apply(c *cgroups.Cgroup, pid int) (cgroups.ActiveCgroup, error) {
var (
unitName = getUnitName(c)
slice = "system.slice"
properties []systemd1.Property
cpuArgs []cgroupArg
cpusetArgs []cgroupArg
memoryArgs []cgroupArg
res systemdCgroup
)
// First set up things not supported by systemd
// -1 disables memorySwap
if c.MemorySwap >= 0 && (c.Memory != 0 || c.MemorySwap > 0) {
memorySwap := c.MemorySwap
if memorySwap == 0 {
// By default, MemorySwap is set to twice the size of RAM.
memorySwap = c.Memory * 2
}
memoryArgs = append(memoryArgs, cgroupArg{"memory.memsw.limit_in_bytes", strconv.FormatInt(memorySwap, 10)})
}
if c.CpusetCpus != "" {
cpusetArgs = append(cpusetArgs, cgroupArg{"cpuset.cpus", c.CpusetCpus})
}
if c.Slice != "" {
slice = c.Slice
}
properties = append(properties,
systemd1.Property{"Slice", dbus.MakeVariant(slice)},
systemd1.Property{"Description", dbus.MakeVariant("docker container " + c.Name)},
systemd1.Property{"PIDs", dbus.MakeVariant([]uint32{uint32(pid)})},
)
if !c.AllowAllDevices {
properties = append(properties,
systemd1.Property{"DevicePolicy", dbus.MakeVariant("strict")})
}
// Always enable accounting, this gets us the same behaviour as the fs implementation,
// plus the kernel has some problems with joining the memory cgroup at a later time.
properties = append(properties,
systemd1.Property{"MemoryAccounting", dbus.MakeVariant(true)},
systemd1.Property{"CPUAccounting", dbus.MakeVariant(true)},
systemd1.Property{"BlockIOAccounting", dbus.MakeVariant(true)})
if c.Memory != 0 {
properties = append(properties,
systemd1.Property{"MemoryLimit", dbus.MakeVariant(uint64(c.Memory))})
}
// TODO: MemoryReservation and MemorySwap not available in systemd
if c.CpuShares != 0 {
properties = append(properties,
systemd1.Property{"CPUShares", dbus.MakeVariant(uint64(c.CpuShares))})
}
if _, err := theConn.StartTransientUnit(unitName, "replace", properties...); err != nil {
return nil, err
}
// To work around the lack of /dev/pts/* support above we need to manually add these
// so, ask systemd for the cgroup used
props, err := theConn.GetUnitTypeProperties(unitName, getIfaceForUnit(unitName))
if err != nil {
return nil, err
}
cgroup := props["ControlGroup"].(string)
if !c.AllowAllDevices {
mountpoint, err := cgroups.FindCgroupMountpoint("devices")
if err != nil {
return nil, err
}
dir := filepath.Join(mountpoint, cgroup)
// We use the same method of allowing devices as in the fs backend. This needs to be changed to use DBUS as soon as possible. However, that change has to wait untill http://cgit.freedesktop.org/systemd/systemd/commit/?id=90060676c442604780634c0a993e3f9c3733f8e6 has been applied in most commonly used systemd versions.
for _, dev := range c.AllowedDevices {
if err := writeFile(dir, "devices.allow", dev.GetCgroupAllowString()); err != nil {
return nil, err
}
}
}
if len(cpuArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("cpu")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range cpuArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
if len(memoryArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("memory")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range memoryArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
if len(cpusetArgs) != 0 {
// systemd does not atm set up the cpuset controller, so we must manually
// join it. Additionally that is a very finicky controller where each
// level must have a full setup as the default for a new directory is "no cpus",
// so we avoid using any hierarchies here, creating a toplevel directory.
mountpoint, err := cgroups.FindCgroupMountpoint("cpuset")
if err != nil {
return nil, err
}
initPath, err := cgroups.GetInitCgroupDir("cpuset")
if err != nil {
return nil, err
}
rootPath := filepath.Join(mountpoint, initPath)
path := filepath.Join(mountpoint, initPath, c.Parent+"-"+c.Name)
res.cleanupDirs = append(res.cleanupDirs, path)
if err := os.MkdirAll(path, 0755); err != nil && !os.IsExist(err) {
return nil, err
}
foundCpus := false
foundMems := false
for _, arg := range cpusetArgs {
if arg.File == "cpuset.cpus" {
foundCpus = true
}
if arg.File == "cpuset.mems" {
foundMems = true
}
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundCpus {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.cpus"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.cpus"), s, 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundMems {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.mems"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.mems"), s, 0700); err != nil {
return nil, err
}
}
if err := ioutil.WriteFile(filepath.Join(path, "cgroup.procs"), []byte(strconv.Itoa(pid)), 0700); err != nil {
return nil, err
}
}
return &res, nil
}
func Apply(c *cgroups.Cgroup, pid int) (cgroups.ActiveCgroup, error) {
var (
unitName = getUnitName(c)
slice = "system.slice"
properties []systemd1.Property
cpuArgs []cgroupArg
cpusetArgs []cgroupArg
memoryArgs []cgroupArg
res systemdCgroup
)
// First set up things not supported by systemd
// -1 disables memorySwap
if c.MemorySwap >= 0 && (c.Memory != 0 || c.MemorySwap > 0) {
memorySwap := c.MemorySwap
if memorySwap == 0 {
// By default, MemorySwap is set to twice the size of RAM.
memorySwap = c.Memory * 2
}
memoryArgs = append(memoryArgs, cgroupArg{"memory.memsw.limit_in_bytes", strconv.FormatInt(memorySwap, 10)})
}
if c.CpusetCpus != "" {
cpusetArgs = append(cpusetArgs, cgroupArg{"cpuset.cpus", c.CpusetCpus})
}
if c.Slice != "" {
slice = c.Slice
}
properties = append(properties,
systemd1.Property{"Slice", dbus.MakeVariant(slice)},
systemd1.Property{"Description", dbus.MakeVariant("docker container " + c.Name)},
systemd1.Property{"PIDs", dbus.MakeVariant([]uint32{uint32(pid)})},
)
// Always enable accounting, this gets us the same behaviour as the fs implementation,
// plus the kernel has some problems with joining the memory cgroup at a later time.
properties = append(properties,
systemd1.Property{"MemoryAccounting", dbus.MakeVariant(true)},
systemd1.Property{"CPUAccounting", dbus.MakeVariant(true)},
systemd1.Property{"BlockIOAccounting", dbus.MakeVariant(true)})
if c.Memory != 0 {
properties = append(properties,
systemd1.Property{"MemoryLimit", dbus.MakeVariant(uint64(c.Memory))})
}
// TODO: MemoryReservation and MemorySwap not available in systemd
if c.CpuShares != 0 {
properties = append(properties,
systemd1.Property{"CPUShares", dbus.MakeVariant(uint64(c.CpuShares))})
}
if _, err := theConn.StartTransientUnit(unitName, "replace", properties...); err != nil {
return nil, err
}
// To work around the lack of /dev/pts/* support above we need to manually add these
// so, ask systemd for the cgroup used
props, err := theConn.GetUnitTypeProperties(unitName, getIfaceForUnit(unitName))
if err != nil {
return nil, err
}
cgroup := props["ControlGroup"].(string)
if !c.AllowAllDevices {
// Atm we can't use the systemd device support because of two missing things:
// * Support for wildcards to allow mknod on any device
// * Support for wildcards to allow /dev/pts support
//
// The second is available in more recent systemd as "char-pts", but not in e.g. v208 which is
// in wide use. When both these are availalable we will be able to switch, but need to keep the old
// implementation for backwards compat.
//
// Note: we can't use systemd to set up the initial limits, and then change the cgroup
// because systemd will re-write the device settings if it needs to re-apply the cgroup context.
// This happens at least for v208 when any sibling unit is started.
mountpoint, err := cgroups.FindCgroupMountpoint("devices")
if err != nil {
return nil, err
}
initPath, err := cgroups.GetInitCgroupDir("devices")
if err != nil {
return nil, err
}
dir := filepath.Join(mountpoint, initPath, c.Parent, c.Name)
res.cleanupDirs = append(res.cleanupDirs, dir)
if err := os.MkdirAll(dir, 0755); err != nil && !os.IsExist(err) {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(dir, "cgroup.procs"), []byte(strconv.Itoa(pid)), 0700); err != nil {
return nil, err
}
if err := writeFile(dir, "devices.deny", "a"); err != nil {
return nil, err
}
for _, dev := range c.AllowedDevices {
if err := writeFile(dir, "devices.allow", dev.GetCgroupAllowString()); err != nil {
return nil, err
}
}
}
if len(cpuArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("cpu")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range cpuArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
if len(memoryArgs) != 0 {
mountpoint, err := cgroups.FindCgroupMountpoint("memory")
if err != nil {
return nil, err
}
path := filepath.Join(mountpoint, cgroup)
for _, arg := range memoryArgs {
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
}
// we need to manually join the freezer cgroup in systemd because it does not currently support it
// via the dbus api
freezerPath, err := joinFreezer(c, pid)
if err != nil {
return nil, err
}
res.cleanupDirs = append(res.cleanupDirs, freezerPath)
if len(cpusetArgs) != 0 {
// systemd does not atm set up the cpuset controller, so we must manually
// join it. Additionally that is a very finicky controller where each
// level must have a full setup as the default for a new directory is "no cpus",
// so we avoid using any hierarchies here, creating a toplevel directory.
mountpoint, err := cgroups.FindCgroupMountpoint("cpuset")
if err != nil {
return nil, err
}
initPath, err := cgroups.GetInitCgroupDir("cpuset")
if err != nil {
return nil, err
}
var (
foundCpus bool
foundMems bool
rootPath = filepath.Join(mountpoint, initPath)
path = filepath.Join(mountpoint, initPath, c.Parent+"-"+c.Name)
)
res.cleanupDirs = append(res.cleanupDirs, path)
if err := os.MkdirAll(path, 0755); err != nil && !os.IsExist(err) {
return nil, err
}
for _, arg := range cpusetArgs {
if arg.File == "cpuset.cpus" {
foundCpus = true
}
if arg.File == "cpuset.mems" {
foundMems = true
}
if err := ioutil.WriteFile(filepath.Join(path, arg.File), []byte(arg.Value), 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundCpus {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.cpus"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.cpus"), s, 0700); err != nil {
return nil, err
}
}
// These are required, if not specified inherit from parent
if !foundMems {
s, err := ioutil.ReadFile(filepath.Join(rootPath, "cpuset.mems"))
if err != nil {
return nil, err
}
if err := ioutil.WriteFile(filepath.Join(path, "cpuset.mems"), s, 0700); err != nil {
return nil, err
}
}
if err := ioutil.WriteFile(filepath.Join(path, "cgroup.procs"), []byte(strconv.Itoa(pid)), 0700); err != nil {
return nil, err
}
}
return &res, nil
}
