Beispiel #1
0
// Fixup instructions after allocauto (formerly compactframe) has moved all autos around.
func fixautoused(p *obj.Prog) {
	for lp := &p; ; {
		p = *lp
		if p == nil {
			break
		}
		if p.As == obj.ATYPE && p.From.Node != nil && p.From.Name == obj.NAME_AUTO && !((p.From.Node).(*Node)).Used {
			*lp = p.Link
			continue
		}

		if (p.As == obj.AVARDEF || p.As == obj.AVARKILL || p.As == obj.AVARLIVE) && p.To.Node != nil && !((p.To.Node).(*Node)).Used {
			// Cannot remove VARDEF instruction, because - unlike TYPE handled above -
			// VARDEFs are interspersed with other code, and a jump might be using the
			// VARDEF as a target. Replace with a no-op instead. A later pass will remove
			// the no-ops.
			obj.Nopout(p)

			continue
		}

		if p.From.Name == obj.NAME_AUTO && p.From.Node != nil {
			p.From.Offset += stkdelta[p.From.Node.(*Node)]
		}

		if p.To.Name == obj.NAME_AUTO && p.To.Node != nil {
			p.To.Offset += stkdelta[p.To.Node.(*Node)]
		}

		lp = &p.Link
	}
}
Beispiel #2
0
func rewriteToPcrel(ctxt *obj.Link, p *obj.Prog) {
	// RegTo2 is set on the instructions we insert here so they don't get
	// processed twice.
	if p.RegTo2 != 0 {
		return
	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	// Any Prog (aside from the above special cases) with an Addr with Name ==
	// NAME_EXTERN, NAME_STATIC or NAME_GOTREF has a CALL __x86.get_pc_thunk.cx
	// inserted before it.
	isName := func(a *obj.Addr) bool {
		if a.Sym == nil || (a.Type != obj.TYPE_MEM && a.Type != obj.TYPE_ADDR) || a.Reg != 0 {
			return false
		}
		if a.Sym.Type == obj.STLSBSS {
			return false
		}
		return a.Name == obj.NAME_EXTERN || a.Name == obj.NAME_STATIC || a.Name == obj.NAME_GOTREF
	}

	if isName(&p.From) && p.From.Type == obj.TYPE_ADDR {
		// Handle things like "MOVL $sym, (SP)" or "PUSHL $sym" by rewriting
		// to "MOVL $sym, CX; MOVL CX, (SP)" or "MOVL $sym, CX; PUSHL CX"
		// respectively.
		if p.To.Type != obj.TYPE_REG {
			q := obj.Appendp(ctxt, p)
			q.As = p.As
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_CX
			q.To = p.To
			p.As = AMOVL
			p.To.Type = obj.TYPE_REG
			p.To.Reg = REG_CX
			p.To.Sym = nil
			p.To.Name = obj.NAME_NONE
		}
	}

	if !isName(&p.From) && !isName(&p.To) && (p.From3 == nil || !isName(p.From3)) {
		return
	}
	q := obj.Appendp(ctxt, p)
	q.RegTo2 = 1
	r := obj.Appendp(ctxt, q)
	r.RegTo2 = 1
	q.As = obj.ACALL
	q.To.Sym = obj.Linklookup(ctxt, "__x86.get_pc_thunk.cx", 0)
	q.To.Type = obj.TYPE_MEM
	q.To.Name = obj.NAME_EXTERN
	q.To.Sym.Local = true
	r.As = p.As
	r.Scond = p.Scond
	r.From = p.From
	r.From3 = p.From3
	r.Reg = p.Reg
	r.To = p.To
	obj.Nopout(p)
}
Beispiel #3
0
func excise(r *gc.Flow) {
	p := r.Prog
	if gc.Debug['P'] != 0 && gc.Debug['v'] != 0 {
		fmt.Printf("%v ===delete===\n", p)
	}
	obj.Nopout(p)
	gc.Ostats.Ndelmov++
}
Beispiel #4
0
func Clearp(p *obj.Prog) {
	obj.Nopout(p)
	p.As = obj.AEND
	p.Pc = int64(pcloc)
	pcloc++
}
Beispiel #5
0
// Rewrite p, if necessary, to access global data via the global offset table.
func rewriteToUseGot(ctxt *obj.Link, p *obj.Prog) {
	if p.As == obj.ADUFFCOPY || p.As == obj.ADUFFZERO {
		//     ADUFFxxx $offset
		// becomes
		//     MOVW runtime.duffxxx@GOT, R9
		//     ADD $offset, R9
		//     CALL (R9)
		var sym *obj.LSym
		if p.As == obj.ADUFFZERO {
			sym = obj.Linklookup(ctxt, "runtime.duffzero", 0)
		} else {
			sym = obj.Linklookup(ctxt, "runtime.duffcopy", 0)
		}
		offset := p.To.Offset
		p.As = AMOVW
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		p.From.Sym = sym
		p.To.Type = obj.TYPE_REG
		p.To.Reg = REG_R9
		p.To.Name = obj.NAME_NONE
		p.To.Offset = 0
		p.To.Sym = nil
		p1 := obj.Appendp(ctxt, p)
		p1.As = AADD
		p1.From.Type = obj.TYPE_CONST
		p1.From.Offset = offset
		p1.To.Type = obj.TYPE_REG
		p1.To.Reg = REG_R9
		p2 := obj.Appendp(ctxt, p1)
		p2.As = obj.ACALL
		p2.To.Type = obj.TYPE_MEM
		p2.To.Reg = REG_R9
		return
	}

	// We only care about global data: NAME_EXTERN means a global
	// symbol in the Go sense, and p.Sym.Local is true for a few
	// internally defined symbols.
	if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// MOVW $sym, Rx becomes MOVW sym@GOT, Rx
		// MOVW $sym+<off>, Rx becomes MOVW sym@GOT, Rx; ADD <off>, Rx
		if p.As != AMOVW {
			ctxt.Diag("do not know how to handle TYPE_ADDR in %v with -dynlink", p)
		}
		if p.To.Type != obj.TYPE_REG {
			ctxt.Diag("do not know how to handle LEAQ-type insn to non-register in %v with -dynlink", p)
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		if p.From.Offset != 0 {
			q := obj.Appendp(ctxt, p)
			q.As = AADD
			q.From.Type = obj.TYPE_CONST
			q.From.Offset = p.From.Offset
			q.To = p.To
			p.From.Offset = 0
		}
	}
	if p.From3 != nil && p.From3.Name == obj.NAME_EXTERN {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	var source *obj.Addr
	// MOVx sym, Ry becomes MOVW sym@GOT, R9; MOVx (R9), Ry
	// MOVx Ry, sym becomes MOVW sym@GOT, R9; MOVx Ry, (R9)
	// An addition may be inserted between the two MOVs if there is an offset.
	if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
			ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
		}
		source = &p.From
	} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
		source = &p.To
	} else {
		return
	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	if source.Sym.Type == obj.STLSBSS {
		return
	}
	if source.Type != obj.TYPE_MEM {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	p1 := obj.Appendp(ctxt, p)
	p2 := obj.Appendp(ctxt, p1)

	p1.As = AMOVW
	p1.From.Type = obj.TYPE_MEM
	p1.From.Sym = source.Sym
	p1.From.Name = obj.NAME_GOTREF
	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = REG_R9

	p2.As = p.As
	p2.From = p.From
	p2.To = p.To
	if p.From.Name == obj.NAME_EXTERN {
		p2.From.Reg = REG_R9
		p2.From.Name = obj.NAME_NONE
		p2.From.Sym = nil
	} else if p.To.Name == obj.NAME_EXTERN {
		p2.To.Reg = REG_R9
		p2.To.Name = obj.NAME_NONE
		p2.To.Sym = nil
	} else {
		return
	}
	obj.Nopout(p)
}
Beispiel #6
0
// Rewrite p, if necessary, to access global data via the global offset table.
func rewriteToUseGot(ctxt *obj.Link, p *obj.Prog) {
	// At the moment EXRL instructions are not emitted by the compiler and only reference local symbols in
	// assembly code.
	if p.As == AEXRL {
		return
	}

	// We only care about global data: NAME_EXTERN means a global
	// symbol in the Go sense, and p.Sym.Local is true for a few
	// internally defined symbols.
	if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// MOVD $sym, Rx becomes MOVD sym@GOT, Rx
		// MOVD $sym+<off>, Rx becomes MOVD sym@GOT, Rx; ADD <off>, Rx
		if p.To.Type != obj.TYPE_REG || p.As != AMOVD {
			ctxt.Diag("do not know how to handle LEA-type insn to non-register in %v with -dynlink", p)
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		q := p
		if p.From.Offset != 0 {
			q = obj.Appendp(ctxt, p)
			q.As = AADD
			q.From.Type = obj.TYPE_CONST
			q.From.Offset = p.From.Offset
			q.To = p.To
			p.From.Offset = 0
		}
	}
	if p.From3 != nil && p.From3.Name == obj.NAME_EXTERN {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	var source *obj.Addr
	// MOVD sym, Ry becomes MOVD sym@GOT, REGTMP; MOVD (REGTMP), Ry
	// MOVD Ry, sym becomes MOVD sym@GOT, REGTMP; MOVD Ry, (REGTMP)
	// An addition may be inserted between the two MOVs if there is an offset.
	if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
			ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
		}
		source = &p.From
	} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
		source = &p.To
	} else {
		return
	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	if source.Sym.Type == obj.STLSBSS {
		return
	}
	if source.Type != obj.TYPE_MEM {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	p1 := obj.Appendp(ctxt, p)
	p2 := obj.Appendp(ctxt, p1)

	p1.As = AMOVD
	p1.From.Type = obj.TYPE_MEM
	p1.From.Sym = source.Sym
	p1.From.Name = obj.NAME_GOTREF
	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = REGTMP

	p2.As = p.As
	p2.From = p.From
	p2.To = p.To
	if p.From.Name == obj.NAME_EXTERN {
		p2.From.Reg = REGTMP
		p2.From.Name = obj.NAME_NONE
		p2.From.Sym = nil
	} else if p.To.Name == obj.NAME_EXTERN {
		p2.To.Reg = REGTMP
		p2.To.Name = obj.NAME_NONE
		p2.To.Sym = nil
	} else {
		return
	}
	obj.Nopout(p)
}
Beispiel #7
0
func progedit(ctxt *obj.Link, p *obj.Prog) {
	// Maintain information about code generation mode.
	if ctxt.Mode == 0 {
		ctxt.Mode = ctxt.Arch.RegSize * 8
	}
	p.Mode = int8(ctxt.Mode)

	switch p.As {
	case AMODE:
		if p.From.Type == obj.TYPE_CONST || (p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_NONE) {
			switch int(p.From.Offset) {
			case 16, 32, 64:
				ctxt.Mode = int(p.From.Offset)
			}
		}
		obj.Nopout(p)
	}

	// Thread-local storage references use the TLS pseudo-register.
	// As a register, TLS refers to the thread-local storage base, and it
	// can only be loaded into another register:
	//
	//         MOVQ TLS, AX
	//
	// An offset from the thread-local storage base is written off(reg)(TLS*1).
	// Semantically it is off(reg), but the (TLS*1) annotation marks this as
	// indexing from the loaded TLS base. This emits a relocation so that
	// if the linker needs to adjust the offset, it can. For example:
	//
	//         MOVQ TLS, AX
	//         MOVQ 0(AX)(TLS*1), CX // load g into CX
	//
	// On systems that support direct access to the TLS memory, this
	// pair of instructions can be reduced to a direct TLS memory reference:
	//
	//         MOVQ 0(TLS), CX // load g into CX
	//
	// The 2-instruction and 1-instruction forms correspond to the two code
	// sequences for loading a TLS variable in the local exec model given in "ELF
	// Handling For Thread-Local Storage".
	//
	// We apply this rewrite on systems that support the 1-instruction form.
	// The decision is made using only the operating system and the -shared flag,
	// not the link mode. If some link modes on a particular operating system
	// require the 2-instruction form, then all builds for that operating system
	// will use the 2-instruction form, so that the link mode decision can be
	// delayed to link time.
	//
	// In this way, all supported systems use identical instructions to
	// access TLS, and they are rewritten appropriately first here in
	// liblink and then finally using relocations in the linker.
	//
	// When -shared is passed, we leave the code in the 2-instruction form but
	// assemble (and relocate) them in different ways to generate the initial
	// exec code sequence. It's a bit of a fluke that this is possible without
	// rewriting the instructions more comprehensively, and it only does because
	// we only support a single TLS variable (g).

	if CanUse1InsnTLS(ctxt) {
		// Reduce 2-instruction sequence to 1-instruction sequence.
		// Sequences like
		//	MOVQ TLS, BX
		//	... off(BX)(TLS*1) ...
		// become
		//	NOP
		//	... off(TLS) ...
		//
		// TODO(rsc): Remove the Hsolaris special case. It exists only to
		// guarantee we are producing byte-identical binaries as before this code.
		// But it should be unnecessary.
		if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_REG && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 && ctxt.Headtype != obj.Hsolaris {
			obj.Nopout(p)
		}
		if p.From.Type == obj.TYPE_MEM && p.From.Index == REG_TLS && REG_AX <= p.From.Reg && p.From.Reg <= REG_R15 {
			p.From.Reg = REG_TLS
			p.From.Scale = 0
			p.From.Index = REG_NONE
		}

		if p.To.Type == obj.TYPE_MEM && p.To.Index == REG_TLS && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
			p.To.Reg = REG_TLS
			p.To.Scale = 0
			p.To.Index = REG_NONE
		}
	} else {
		// load_g_cx, below, always inserts the 1-instruction sequence. Rewrite it
		// as the 2-instruction sequence if necessary.
		//	MOVQ 0(TLS), BX
		// becomes
		//	MOVQ TLS, BX
		//	MOVQ 0(BX)(TLS*1), BX
		if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
			q := obj.Appendp(ctxt, p)
			q.As = p.As
			q.From = p.From
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = p.To.Reg
			q.From.Index = REG_TLS
			q.From.Scale = 2 // TODO: use 1
			q.To = p.To
			p.From.Type = obj.TYPE_REG
			p.From.Reg = REG_TLS
			p.From.Index = REG_NONE
			p.From.Offset = 0
		}
	}

	// TODO: Remove.
	if ctxt.Headtype == obj.Hwindows && p.Mode == 64 || ctxt.Headtype == obj.Hplan9 {
		if p.From.Scale == 1 && p.From.Index == REG_TLS {
			p.From.Scale = 2
		}
		if p.To.Scale == 1 && p.To.Index == REG_TLS {
			p.To.Scale = 2
		}
	}

	// Rewrite 0 to $0 in 3rd argument to CMPPS etc.
	// That's what the tables expect.
	switch p.As {
	case ACMPPD, ACMPPS, ACMPSD, ACMPSS:
		if p.To.Type == obj.TYPE_MEM && p.To.Name == obj.NAME_NONE && p.To.Reg == REG_NONE && p.To.Index == REG_NONE && p.To.Sym == nil {
			p.To.Type = obj.TYPE_CONST
		}
	}

	// Rewrite CALL/JMP/RET to symbol as TYPE_BRANCH.
	switch p.As {
	case obj.ACALL, obj.AJMP, obj.ARET:
		if p.To.Type == obj.TYPE_MEM && (p.To.Name == obj.NAME_EXTERN || p.To.Name == obj.NAME_STATIC) && p.To.Sym != nil {
			p.To.Type = obj.TYPE_BRANCH
		}
	}

	// Rewrite MOVL/MOVQ $XXX(FP/SP) as LEAL/LEAQ.
	if p.From.Type == obj.TYPE_ADDR && (ctxt.Arch.Family == sys.AMD64 || p.From.Name != obj.NAME_EXTERN && p.From.Name != obj.NAME_STATIC) {
		switch p.As {
		case AMOVL:
			p.As = ALEAL
			p.From.Type = obj.TYPE_MEM
		case AMOVQ:
			p.As = ALEAQ
			p.From.Type = obj.TYPE_MEM
		}
	}

	if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
		if p.From3 != nil {
			nacladdr(ctxt, p, p.From3)
		}
		nacladdr(ctxt, p, &p.From)
		nacladdr(ctxt, p, &p.To)
	}

	// Rewrite float constants to values stored in memory.
	switch p.As {
	// Convert AMOVSS $(0), Xx to AXORPS Xx, Xx
	case AMOVSS:
		if p.From.Type == obj.TYPE_FCONST {
			//  f == 0 can't be used here due to -0, so use Float64bits
			if f := p.From.Val.(float64); math.Float64bits(f) == 0 {
				if p.To.Type == obj.TYPE_REG && REG_X0 <= p.To.Reg && p.To.Reg <= REG_X15 {
					p.As = AXORPS
					p.From = p.To
					break
				}
			}
		}
		fallthrough

	case AFMOVF,
		AFADDF,
		AFSUBF,
		AFSUBRF,
		AFMULF,
		AFDIVF,
		AFDIVRF,
		AFCOMF,
		AFCOMFP,
		AADDSS,
		ASUBSS,
		AMULSS,
		ADIVSS,
		ACOMISS,
		AUCOMISS:
		if p.From.Type == obj.TYPE_FCONST {
			f32 := float32(p.From.Val.(float64))
			i32 := math.Float32bits(f32)
			literal := fmt.Sprintf("$f32.%08x", i32)
			s := obj.Linklookup(ctxt, literal, 0)
			p.From.Type = obj.TYPE_MEM
			p.From.Name = obj.NAME_EXTERN
			p.From.Sym = s
			p.From.Sym.Local = true
			p.From.Offset = 0
		}

	case AMOVSD:
		// Convert AMOVSD $(0), Xx to AXORPS Xx, Xx
		if p.From.Type == obj.TYPE_FCONST {
			//  f == 0 can't be used here due to -0, so use Float64bits
			if f := p.From.Val.(float64); math.Float64bits(f) == 0 {
				if p.To.Type == obj.TYPE_REG && REG_X0 <= p.To.Reg && p.To.Reg <= REG_X15 {
					p.As = AXORPS
					p.From = p.To
					break
				}
			}
		}
		fallthrough

	case AFMOVD,
		AFADDD,
		AFSUBD,
		AFSUBRD,
		AFMULD,
		AFDIVD,
		AFDIVRD,
		AFCOMD,
		AFCOMDP,
		AADDSD,
		ASUBSD,
		AMULSD,
		ADIVSD,
		ACOMISD,
		AUCOMISD:
		if p.From.Type == obj.TYPE_FCONST {
			i64 := math.Float64bits(p.From.Val.(float64))
			literal := fmt.Sprintf("$f64.%016x", i64)
			s := obj.Linklookup(ctxt, literal, 0)
			p.From.Type = obj.TYPE_MEM
			p.From.Name = obj.NAME_EXTERN
			p.From.Sym = s
			p.From.Sym.Local = true
			p.From.Offset = 0
		}
	}

	if ctxt.Flag_dynlink {
		rewriteToUseGot(ctxt, p)
	}

	if ctxt.Flag_shared && p.Mode == 32 {
		rewriteToPcrel(ctxt, p)
	}
}
Beispiel #8
0
// Rewrite p, if necessary, to access global data via the global offset table.
func rewriteToUseGot(ctxt *obj.Link, p *obj.Prog) {
	var add, lea, mov obj.As
	var reg int16
	if p.Mode == 64 {
		add = AADDQ
		lea = ALEAQ
		mov = AMOVQ
		reg = REG_R15
	} else {
		add = AADDL
		lea = ALEAL
		mov = AMOVL
		reg = REG_CX
	}

	if p.As == obj.ADUFFCOPY || p.As == obj.ADUFFZERO {
		//     ADUFFxxx $offset
		// becomes
		//     $MOV runtime.duffxxx@GOT, $reg
		//     $ADD $offset, $reg
		//     CALL $reg
		var sym *obj.LSym
		if p.As == obj.ADUFFZERO {
			sym = obj.Linklookup(ctxt, "runtime.duffzero", 0)
		} else {
			sym = obj.Linklookup(ctxt, "runtime.duffcopy", 0)
		}
		offset := p.To.Offset
		p.As = mov
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		p.From.Sym = sym
		p.To.Type = obj.TYPE_REG
		p.To.Reg = reg
		p.To.Offset = 0
		p.To.Sym = nil
		p1 := obj.Appendp(ctxt, p)
		p1.As = add
		p1.From.Type = obj.TYPE_CONST
		p1.From.Offset = offset
		p1.To.Type = obj.TYPE_REG
		p1.To.Reg = reg
		p2 := obj.Appendp(ctxt, p1)
		p2.As = obj.ACALL
		p2.To.Type = obj.TYPE_REG
		p2.To.Reg = reg
	}

	// We only care about global data: NAME_EXTERN means a global
	// symbol in the Go sense, and p.Sym.Local is true for a few
	// internally defined symbols.
	if p.As == lea && p.From.Type == obj.TYPE_MEM && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// $LEA sym, Rx becomes $MOV $sym, Rx which will be rewritten below
		p.As = mov
		p.From.Type = obj.TYPE_ADDR
	}
	if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// $MOV $sym, Rx becomes $MOV sym@GOT, Rx
		// $MOV $sym+<off>, Rx becomes $MOV sym@GOT, Rx; $LEA <off>(Rx), Rx
		// On 386 only, more complicated things like PUSHL $sym become $MOV sym@GOT, CX; PUSHL CX
		cmplxdest := false
		pAs := p.As
		var dest obj.Addr
		if p.To.Type != obj.TYPE_REG || pAs != mov {
			if p.Mode == 64 {
				ctxt.Diag("do not know how to handle LEA-type insn to non-register in %v with -dynlink", p)
			}
			cmplxdest = true
			dest = p.To
			p.As = mov
			p.To.Type = obj.TYPE_REG
			p.To.Reg = REG_CX
			p.To.Sym = nil
			p.To.Name = obj.NAME_NONE
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		q := p
		if p.From.Offset != 0 {
			q = obj.Appendp(ctxt, p)
			q.As = lea
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = p.To.Reg
			q.From.Offset = p.From.Offset
			q.To = p.To
			p.From.Offset = 0
		}
		if cmplxdest {
			q = obj.Appendp(ctxt, q)
			q.As = pAs
			q.To = dest
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_CX
		}
	}
	if p.From3 != nil && p.From3.Name == obj.NAME_EXTERN {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	var source *obj.Addr
	// MOVx sym, Ry becomes $MOV sym@GOT, R15; MOVx (R15), Ry
	// MOVx Ry, sym becomes $MOV sym@GOT, R15; MOVx Ry, (R15)
	// An addition may be inserted between the two MOVs if there is an offset.
	if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
			ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
		}
		source = &p.From
	} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
		source = &p.To
	} else {
		return
	}
	if p.As == obj.ACALL {
		// When dynlinking on 386, almost any call might end up being a call
		// to a PLT, so make sure the GOT pointer is loaded into BX.
		// RegTo2 is set on the replacement call insn to stop it being
		// processed when it is in turn passed to progedit.
		if p.Mode == 64 || (p.To.Sym != nil && p.To.Sym.Local) || p.RegTo2 != 0 {
			return
		}
		p1 := obj.Appendp(ctxt, p)
		p2 := obj.Appendp(ctxt, p1)

		p1.As = ALEAL
		p1.From.Type = obj.TYPE_MEM
		p1.From.Name = obj.NAME_STATIC
		p1.From.Sym = obj.Linklookup(ctxt, "_GLOBAL_OFFSET_TABLE_", 0)
		p1.To.Type = obj.TYPE_REG
		p1.To.Reg = REG_BX

		p2.As = p.As
		p2.Scond = p.Scond
		p2.From = p.From
		p2.From3 = p.From3
		p2.Reg = p.Reg
		p2.To = p.To
		// p.To.Type was set to TYPE_BRANCH above, but that makes checkaddr
		// in ../pass.go complain, so set it back to TYPE_MEM here, until p2
		// itself gets passed to progedit.
		p2.To.Type = obj.TYPE_MEM
		p2.RegTo2 = 1

		obj.Nopout(p)
		return

	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	if source.Type != obj.TYPE_MEM {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	p1 := obj.Appendp(ctxt, p)
	p2 := obj.Appendp(ctxt, p1)

	p1.As = mov
	p1.From.Type = obj.TYPE_MEM
	p1.From.Sym = source.Sym
	p1.From.Name = obj.NAME_GOTREF
	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = reg

	p2.As = p.As
	p2.From = p.From
	p2.To = p.To
	if p.From.Name == obj.NAME_EXTERN {
		p2.From.Reg = reg
		p2.From.Name = obj.NAME_NONE
		p2.From.Sym = nil
	} else if p.To.Name == obj.NAME_EXTERN {
		p2.To.Reg = reg
		p2.To.Name = obj.NAME_NONE
		p2.To.Sym = nil
	} else {
		return
	}
	obj.Nopout(p)
}
Beispiel #9
0
func excise(r *gc.Flow) {
	p := r.Prog
	obj.Nopout(p)
}