// loadProfiles loads from the file pointed to by shared credentials filename for profile.
// The credentials retrieved from the profile will be returned or error. Error will be
// returned if it fails to read from the file, or the data is invalid.
func loadProfile(filename, profile string) (Value, error) {
	config, err := ini.LoadFile(filename)
	if err != nil {
		return Value{}, awserr.New("SharedCredsLoad", "failed to load shared credentials file", err)
	}
	iniProfile := config.Section(profile)

	id, ok := iniProfile["aws_access_key_id"]
	if !ok {
		return Value{}, awserr.New("SharedCredsAccessKey",
			fmt.Sprintf("shared credentials %s in %s did not contain aws_access_key_id", profile, filename),
			nil)
	}

	secret, ok := iniProfile["aws_secret_access_key"]
	if !ok {
		return Value{}, awserr.New("SharedCredsSecret",
			fmt.Sprintf("shared credentials %s in %s did not contain aws_secret_access_key", profile, filename),
			nil)
	}

	token := iniProfile["aws_session_token"]

	return Value{
		AccessKeyID:     id,
		SecretAccessKey: secret,
		SessionToken:    token,
	}, nil
}
func unmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()

	if r.HTTPResponse.StatusCode == http.StatusMovedPermanently {
		r.Error = awserr.New("BucketRegionError",
			fmt.Sprintf("incorrect region, the bucket is not in '%s' region", aws.StringValue(r.Service.Config.Region)), nil)
		return
	}

	if r.HTTPResponse.ContentLength == int64(0) {
		// No body, use status code to generate an awserr.Error
		r.Error = awserr.NewRequestFailure(
			awserr.New(strings.Replace(r.HTTPResponse.Status, " ", "", -1), r.HTTPResponse.Status, nil),
			r.HTTPResponse.StatusCode,
			"",
		)
		return
	}

	resp := &xmlErrorResponse{}
	err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
	if err != nil && err != io.EOF {
		r.Error = awserr.New("SerializationError", "failed to decode S3 XML error response", nil)
	} else {
		r.Error = awserr.NewRequestFailure(
			awserr.New(resp.Code, resp.Message, nil),
			r.HTTPResponse.StatusCode,
			"",
		)
	}
}
// UnmarshalError unmarshals an error response for an AWS Query service.
func UnmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()

	resp := &xmlErrorResponse{}
	err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
	if err != nil && err != io.EOF {
		r.Error = awserr.New("SerializationError", "failed to decode query XML error response", err)
	} else {
		r.Error = awserr.NewRequestFailure(
			awserr.New(resp.Code, resp.Message, nil),
			r.HTTPResponse.StatusCode,
			resp.RequestID,
		)
	}
}
// Retrieve retrieves credentials from the EC2 service.
// Error will be returned if the request fails, or unable to extract
// the desired credentials.
func (m *EC2RoleProvider) Retrieve() (credentials.Value, error) {
	if m.Client == nil {
		m.Client = ec2metadata.New(nil)
	}

	credsList, err := requestCredList(m.Client)
	if err != nil {
		return credentials.Value{}, err
	}

	if len(credsList) == 0 {
		return credentials.Value{}, awserr.New("EmptyEC2RoleList", "empty EC2 Role list", nil)
	}
	credsName := credsList[0]

	roleCreds, err := requestCred(m.Client, credsName)
	if err != nil {
		return credentials.Value{}, err
	}

	m.SetExpiration(roleCreds.Expiration, m.ExpiryWindow)

	return credentials.Value{
		AccessKeyID:     roleCreds.AccessKeyID,
		SecretAccessKey: roleCreds.SecretAccessKey,
		SessionToken:    roleCreds.Token,
	}, nil
}
Beispiel #5
0
func buildHeader(r *request.Request, v reflect.Value, name string) {
	str, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if str != nil {
		r.HTTPRequest.Header.Add(name, *str)
	}
}
Beispiel #6
0
func buildQueryString(r *request.Request, v reflect.Value, name string, query url.Values) {
	str, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if str != nil {
		query.Set(name, *str)
	}
}
Beispiel #7
0
func unmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	_, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata error respose", err)
	}

	// TODO extract the error...
}
// requestCredList requests a list of credentials from the EC2 service.
// If there are no credentials, or there is an error making or receiving the request
func requestCredList(client *ec2metadata.Client) ([]string, error) {
	resp, err := client.GetMetadata(iamSecurityCredsPath)
	if err != nil {
		return nil, awserr.New("EC2RoleRequestError", "failed to list EC2 Roles", err)
	}

	credsList := []string{}
	s := bufio.NewScanner(strings.NewReader(resp))
	for s.Scan() {
		credsList = append(credsList, s.Text())
	}

	if err := s.Err(); err != nil {
		return nil, awserr.New("SerializationError", "failed to read list of EC2 Roles", err)
	}

	return credsList, nil
}
Beispiel #9
0
func buildHeaderMap(r *request.Request, v reflect.Value, prefix string) {
	for _, key := range v.MapKeys() {
		str, err := convertType(v.MapIndex(key))
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
		} else if str != nil {
			r.HTTPRequest.Header.Add(prefix+key.String(), *str)
		}
	}
}
Beispiel #10
0
func unmarshalHandler(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	b, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata respose", err)
	}

	data := r.Data.(*metadataOutput)
	data.Content = string(b)
}
Beispiel #11
0
// internal logic for deciding whether to upload a single part or use a
// multipart upload.
func (u *uploader) upload() (*UploadOutput, error) {
	u.init()

	if u.opts.PartSize < MinUploadPartSize {
		msg := fmt.Sprintf("part size must be at least %d bytes", MinUploadPartSize)
		return nil, awserr.New("ConfigError", msg, nil)
	}

	// Do one read to determine if we have more than one part
	buf, err := u.nextReader()
	if err == io.EOF || err == io.ErrUnexpectedEOF { // single part
		return u.singlePart(buf)
	} else if err != nil {
		return nil, awserr.New("ReadRequestBody", "read upload data failed", err)
	}

	mu := multiuploader{uploader: u}
	return mu.upload(buf)
}
Beispiel #12
0
func buildURI(r *request.Request, v reflect.Value, name string) {
	value, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if value != nil {
		uri := r.HTTPRequest.URL.Path
		uri = strings.Replace(uri, "{"+name+"}", EscapePath(*value, true), -1)
		uri = strings.Replace(uri, "{"+name+"+}", EscapePath(*value, false), -1)
		r.HTTPRequest.URL.Path = uri
	}
}
Beispiel #13
0
// Unmarshal unmarshals a response for an AWS Query service.
func Unmarshal(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	if r.DataFilled() {
		decoder := xml.NewDecoder(r.HTTPResponse.Body)
		err := xmlutil.UnmarshalXML(r.Data, decoder, r.Operation.Name+"Result")
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed decoding Query response", err)
			return
		}
	}
}
Beispiel #14
0
func unmarshalBody(r *request.Request, v reflect.Value) {
	if field, ok := v.Type().FieldByName("SDKShapeTraits"); ok {
		if payloadName := field.Tag.Get("payload"); payloadName != "" {
			pfield, _ := v.Type().FieldByName(payloadName)
			if ptag := pfield.Tag.Get("type"); ptag != "" && ptag != "structure" {
				payload := v.FieldByName(payloadName)
				if payload.IsValid() {
					switch payload.Interface().(type) {
					case []byte:
						b, err := ioutil.ReadAll(r.HTTPResponse.Body)
						if err != nil {
							r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
						} else {
							payload.Set(reflect.ValueOf(b))
						}
					case *string:
						b, err := ioutil.ReadAll(r.HTTPResponse.Body)
						if err != nil {
							r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
						} else {
							str := string(b)
							payload.Set(reflect.ValueOf(&str))
						}
					default:
						switch payload.Type().String() {
						case "io.ReadSeeker":
							payload.Set(reflect.ValueOf(aws.ReadSeekCloser(r.HTTPResponse.Body)))
						case "aws.ReadSeekCloser", "io.ReadCloser":
							payload.Set(reflect.ValueOf(r.HTTPResponse.Body))
						default:
							r.Error = awserr.New("SerializationError",
								"failed to decode REST response",
								fmt.Errorf("unknown payload type %s", payload.Type()))
						}
					}
				}
			}
		}
	}
}
Beispiel #15
0
// Unmarshal unmarshals a payload response for the REST XML protocol.
func Unmarshal(r *request.Request) {
	if t := rest.PayloadType(r.Data); t == "structure" || t == "" {
		defer r.HTTPResponse.Body.Close()
		decoder := xml.NewDecoder(r.HTTPResponse.Body)
		err := xmlutil.UnmarshalXML(r.Data, decoder, "")
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to decode REST XML response", err)
			return
		}
	} else {
		rest.Unmarshal(r)
	}
}
Beispiel #16
0
// Build builds a request payload for the REST XML protocol.
func Build(r *request.Request) {
	rest.Build(r)

	if t := rest.PayloadType(r.Params); t == "structure" || t == "" {
		var buf bytes.Buffer
		err := xmlutil.BuildXML(r.Params, xml.NewEncoder(&buf))
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to encode rest XML request", err)
			return
		}
		r.SetBufferBody(buf.Bytes())
	}
}
Beispiel #17
0
// contentMD5 computes and sets the HTTP Content-MD5 header for requests that
// require it.
func contentMD5(r *request.Request) {
	h := md5.New()

	// hash the body.  seek back to the first position after reading to reset
	// the body for transmission.  copy errors may be assumed to be from the
	// body.
	_, err := io.Copy(h, r.Body)
	if err != nil {
		r.Error = awserr.New("ContentMD5", "failed to read body", err)
		return
	}
	_, err = r.Body.Seek(0, 0)
	if err != nil {
		r.Error = awserr.New("ContentMD5", "failed to seek body", err)
		return
	}

	// encode the md5 checksum in base64 and set the request header.
	sum := h.Sum(nil)
	sum64 := make([]byte, base64.StdEncoding.EncodedLen(len(sum)))
	base64.StdEncoding.Encode(sum64, sum)
	r.HTTPRequest.Header.Set("Content-MD5", string(sum64))
}
// requestCred requests the credentials for a specific credentials from the EC2 service.
//
// If the credentials cannot be found, or there is an error reading the response
// and error will be returned.
func requestCred(client *ec2metadata.Client, credsName string) (ec2RoleCredRespBody, error) {
	resp, err := client.GetMetadata(path.Join(iamSecurityCredsPath, credsName))
	if err != nil {
		return ec2RoleCredRespBody{},
			awserr.New("EC2RoleRequestError",
				fmt.Sprintf("failed to get %s EC2 Role credentials", credsName),
				err)
	}

	respCreds := ec2RoleCredRespBody{}
	if err := json.NewDecoder(strings.NewReader(resp)).Decode(&respCreds); err != nil {
		return ec2RoleCredRespBody{},
			awserr.New("SerializationError",
				fmt.Sprintf("failed to decode %s EC2 Role credentials", credsName),
				err)
	}

	if respCreds.Code != "Success" {
		// If an error code was returned something failed requesting the role.
		return ec2RoleCredRespBody{}, awserr.New(respCreds.Code, respCreds.Message, nil)
	}

	return respCreds, nil
}
Beispiel #19
0
func unmarshalLocationElements(r *request.Request, v reflect.Value) {
	for i := 0; i < v.NumField(); i++ {
		m, field := v.Field(i), v.Type().Field(i)
		if n := field.Name; n[0:1] == strings.ToLower(n[0:1]) {
			continue
		}

		if m.IsValid() {
			name := field.Tag.Get("locationName")
			if name == "" {
				name = field.Name
			}

			switch field.Tag.Get("location") {
			case "statusCode":
				unmarshalStatusCode(m, r.HTTPResponse.StatusCode)
			case "header":
				err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name))
				if err != nil {
					r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
					break
				}
			case "headers":
				prefix := field.Tag.Get("locationName")
				err := unmarshalHeaderMap(m, r.HTTPResponse.Header, prefix)
				if err != nil {
					r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
					break
				}
			}
		}
		if r.Error != nil {
			return
		}
	}
}
func buildGetBucketLocation(r *request.Request) {
	if r.DataFilled() {
		out := r.Data.(*GetBucketLocationOutput)
		b, err := ioutil.ReadAll(r.HTTPResponse.Body)
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed reading response body", err)
			return
		}

		match := reBucketLocation.FindSubmatch(b)
		if len(match) > 1 {
			loc := string(match[1])
			out.LocationConstraint = &loc
		}
	}
}
Beispiel #21
0
func copyMultipartStatusOKUnmarhsalError(r *request.Request) {
	b, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to read response body", err)
		return
	}
	body := bytes.NewReader(b)
	r.HTTPResponse.Body = aws.ReadSeekCloser(body)
	defer r.HTTPResponse.Body.(aws.ReaderSeekerCloser).Seek(0, 0)

	if body.Len() == 0 {
		// If there is no body don't attempt to parse the body.
		return
	}

	unmarshalError(r)
	if err, ok := r.Error.(awserr.Error); ok && err != nil {
		if err.Code() == "SerializationError" {
			r.Error = nil
			return
		}
		r.HTTPResponse.StatusCode = http.StatusServiceUnavailable
	}
}
Beispiel #22
0
func buildBody(r *request.Request, v reflect.Value) {
	if field, ok := v.Type().FieldByName("SDKShapeTraits"); ok {
		if payloadName := field.Tag.Get("payload"); payloadName != "" {
			pfield, _ := v.Type().FieldByName(payloadName)
			if ptag := pfield.Tag.Get("type"); ptag != "" && ptag != "structure" {
				payload := reflect.Indirect(v.FieldByName(payloadName))
				if payload.IsValid() && payload.Interface() != nil {
					switch reader := payload.Interface().(type) {
					case io.ReadSeeker:
						r.SetReaderBody(reader)
					case []byte:
						r.SetBufferBody(reader)
					case string:
						r.SetStringBody(reader)
					default:
						r.Error = awserr.New("SerializationError",
							"failed to encode REST request",
							fmt.Errorf("unknown payload type %s", payload.Type()))
					}
				}
			}
		}
	}
}
package credentials

import (
	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
)

var (
	// ErrStaticCredentialsEmpty is emitted when static credentials are empty.
	//
	// @readonly
	ErrStaticCredentialsEmpty = awserr.New("EmptyStaticCreds", "static credentials are empty", nil)
)

// A StaticProvider is a set of credentials which are set pragmatically,
// and will never expire.
type StaticProvider struct {
	Value
}

// NewStaticCredentials returns a pointer to a new Credentials object
// wrapping a static credentials value provider.
func NewStaticCredentials(id, secret, token string) *Credentials {
	return NewCredentials(&StaticProvider{Value: Value{
		AccessKeyID:     id,
		SecretAccessKey: secret,
		SessionToken:    token,
	}})
}

// Retrieve returns the credentials or error if the credentials are invalid.
func (s *StaticProvider) Retrieve() (Value, error) {
	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/request"
)

// ValidateParameters is a request handler to validate the input parameters.
// Validating parameters only has meaning if done prior to the request being sent.
var ValidateParametersHandler = request.NamedHandler{"core.ValidateParametersHandler", func(r *request.Request) {
	if r.ParamsFilled() {
		v := validator{errors: []string{}}
		v.validateAny(reflect.ValueOf(r.Params), "")

		if count := len(v.errors); count > 0 {
			format := "%d validation errors:\n- %s"
			msg := fmt.Sprintf(format, count, strings.Join(v.errors, "\n- "))
			r.Error = awserr.New("InvalidParameter", msg, nil)
		}
	}
}}

// A validator validates values. Collects validations errors which occurs.
type validator struct {
	errors []string
}

// validateAny will validate any struct, slice or map type. All validations
// are also performed recursively for nested types.
func (v *validator) validateAny(value reflect.Value, path string) {
	value = reflect.Indirect(value)
	if !value.IsValid() {
		return
Beispiel #25
0
package aws

import "github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"

var (
	// ErrMissingRegion is an error that is returned if region configuration is
	// not found.
	//
	// @readonly
	ErrMissingRegion error = awserr.New("MissingRegion", "could not find region configuration", nil)

	// ErrMissingEndpoint is an error that is returned if an endpoint cannot be
	// resolved for a service.
	//
	// @readonly
	ErrMissingEndpoint error = awserr.New("MissingEndpoint", "'Endpoint' configuration is required for this service", nil)
)
import (
	"fmt"
	"os"
	"path/filepath"

	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/vaughan0/go-ini"

	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
)

var (
	// ErrSharedCredentialsHomeNotFound is emitted when the user directory cannot be found.
	//
	// @readonly
	ErrSharedCredentialsHomeNotFound = awserr.New("UserHomeNotFound", "user home directory not found.", nil)
)

// A SharedCredentialsProvider retrieves credentials from the current user's home
// directory, and keeps track if those credentials are expired.
//
// Profile ini file example: $HOME/.aws/credentials
type SharedCredentialsProvider struct {
	// Path to the shared credentials file.
	//
	// If empty will look for "AWS_SHARED_CREDENTIALS_FILE" env variable. If the
	// env value is empty will default to current user's home directory.
	// Linux/OSX: "$HOME/.aws/credentials"
	// Windows:   "%USERPROFILE%\.aws\credentials"
	Filename string
Beispiel #27
0
package credentials

import (
	"os"

	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
)

var (
	// ErrAccessKeyIDNotFound is returned when the AWS Access Key ID can't be
	// found in the process's environment.
	//
	// @readonly
	ErrAccessKeyIDNotFound = awserr.New("EnvAccessKeyNotFound", "AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY not found in environment", nil)

	// ErrSecretAccessKeyNotFound is returned when the AWS Secret Access Key
	// can't be found in the process's environment.
	//
	// @readonly
	ErrSecretAccessKeyNotFound = awserr.New("EnvSecretNotFound", "AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY not found in environment", nil)
)

// A EnvProvider retrieves credentials from the environment variables of the
// running process. Environment credentials never expire.
//
// Environment variables used:
//
// * Access Key ID:     AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY
// * Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY
type EnvProvider struct {
	retrieved bool
Beispiel #28
0
					Body:       ioutil.NopCloser(bytes.NewReader([]byte{})),
				}
				return
			}
		}
		if r.HTTPResponse == nil {
			// Add a dummy request response object to ensure the HTTPResponse
			// value is consistent.
			r.HTTPResponse = &http.Response{
				StatusCode: int(0),
				Status:     http.StatusText(int(0)),
				Body:       ioutil.NopCloser(bytes.NewReader([]byte{})),
			}
		}
		// Catch all other request errors.
		r.Error = awserr.New("RequestError", "send request failed", err)
		r.Retryable = aws.Bool(true) // network errors are retryable
	}
}}

// ValidateResponseHandler is a request handler to validate service response.
var ValidateResponseHandler = request.NamedHandler{"core.ValidateResponseHandler", func(r *request.Request) {
	if r.HTTPResponse.StatusCode == 0 || r.HTTPResponse.StatusCode >= 300 {
		// this may be replaced by an UnmarshalError handler
		r.Error = awserr.New("UnknownError", "unknown error", nil)
	}
}}

// AfterRetryHandler performs final checks to determine if the request should
// be retried and how long to delay.
var AfterRetryHandler = request.NamedHandler{"core.AfterRetryHandler", func(r *request.Request) {
Beispiel #29
0
package credentials

import (
	"github.com/bbc/mozart-api-common/Godeps/_workspace/src/github.com/aws/aws-sdk-go/aws/awserr"
)

var (
	// ErrNoValidProvidersFoundInChain Is returned when there are no valid
	// providers in the ChainProvider.
	//
	// @readonly
	ErrNoValidProvidersFoundInChain = awserr.New("NoCredentialProviders", "no valid providers in chain", nil)
)

// A ChainProvider will search for a provider which returns credentials
// and cache that provider until Retrieve is called again.
//
// The ChainProvider provides a way of chaining multiple providers together
// which will pick the first available using priority order of the Providers
// in the list.
//
// If none of the Providers retrieve valid credentials Value, ChainProvider's
// Retrieve() will return the error ErrNoValidProvidersFoundInChain.
//
// If a Provider is found which returns valid credentials Value ChainProvider
// will cache that Provider for all calls to IsExpired(), until Retrieve is
// called again.
//
// Example of ChainProvider to be used with an EnvProvider and EC2RoleProvider.
// In this example EnvProvider will first check if any credentials are available
// vai the environment variables. If there are none ChainProvider will check
Beispiel #30
0
// upload will perform a multipart upload using the firstBuf buffer containing
// the first chunk of data.
func (u *multiuploader) upload(firstBuf io.ReadSeeker) (*UploadOutput, error) {
	params := &s3.CreateMultipartUploadInput{}
	awsutil.Copy(params, u.in)

	// Create the multipart
	resp, err := u.opts.S3.CreateMultipartUpload(params)
	if err != nil {
		return nil, err
	}
	u.uploadID = *resp.UploadId

	// Create the workers
	ch := make(chan chunk, u.opts.Concurrency)
	for i := 0; i < u.opts.Concurrency; i++ {
		u.wg.Add(1)
		go u.readChunk(ch)
	}

	// Send part 1 to the workers
	var num int64 = 1
	ch <- chunk{buf: firstBuf, num: num}

	// Read and queue the rest of the parts
	for u.geterr() == nil {
		// This upload exceeded maximum number of supported parts, error now.
		if num > int64(MaxUploadParts) {
			msg := fmt.Sprintf("exceeded total allowed parts (%d). "+
				"Adjust PartSize to fit in this limit", MaxUploadParts)
			u.seterr(awserr.New("TotalPartsExceeded", msg, nil))
			break
		}

		num++

		buf, err := u.nextReader()
		if err == io.EOF {
			break
		}

		ch <- chunk{buf: buf, num: num}

		if err != nil && err != io.ErrUnexpectedEOF {
			u.seterr(awserr.New(
				"ReadRequestBody",
				"read multipart upload data failed",
				err))
			break
		}
	}

	// Close the channel, wait for workers, and complete upload
	close(ch)
	u.wg.Wait()
	complete := u.complete()

	if err := u.geterr(); err != nil {
		return nil, &multiUploadError{
			awsError: awserr.New(
				"MultipartUpload",
				"upload multipart failed",
				err),
			uploadID: u.uploadID,
		}
	}
	return &UploadOutput{
		Location:  *complete.Location,
		VersionID: complete.VersionId,
		UploadID:  u.uploadID,
	}, nil
}