Beispiel #1
0
// btcdMain is the real main function for btcd.  It is necessary to work around
// the fact that deferred functions do not run when os.Exit() is called.  The
// optional serverChan parameter is mainly used by the service code to be
// notified with the server once it is setup so it can gracefully stop it when
// requested from the service control manager.
func btcdMain(serverChan chan<- *server) error {
	// Load configuration and parse command line.  This function also
	// initializes logging and configures it accordingly.
	tcfg, _, err := loadConfig()
	if err != nil {
		return err
	}
	cfg = tcfg
	defer backendLog.Flush()

	// Get a channel that will be closed when a shutdown signal has been
	// triggered either from an OS signal such as SIGINT (Ctrl+C) or from
	// another subsystem such as the RPC server.
	interruptedChan := interruptListener()
	defer btcdLog.Info("Shutdown complete")

	// Show version at startup.
	btcdLog.Infof("Version %s", version())

	// Enable http profiling server if requested.
	if cfg.Profile != "" {
		go func() {
			listenAddr := net.JoinHostPort("", cfg.Profile)
			btcdLog.Infof("Profile server listening on %s", listenAddr)
			profileRedirect := http.RedirectHandler("/debug/pprof",
				http.StatusSeeOther)
			http.Handle("/", profileRedirect)
			btcdLog.Errorf("%v", http.ListenAndServe(listenAddr, nil))
		}()
	}

	// Write cpu profile if requested.
	if cfg.CPUProfile != "" {
		f, err := os.Create(cfg.CPUProfile)
		if err != nil {
			btcdLog.Errorf("Unable to create cpu profile: %v", err)
			return err
		}
		pprof.StartCPUProfile(f)
		defer f.Close()
		defer pprof.StopCPUProfile()
	}

	// Perform upgrades to btcd as new versions require it.
	if err := doUpgrades(); err != nil {
		btcdLog.Errorf("%v", err)
		return err
	}

	// Return now if an interrupt signal was triggered.
	if interruptRequested(interruptedChan) {
		return nil
	}

	// Load the block database.
	db, err := loadBlockDB()
	if err != nil {
		btcdLog.Errorf("%v", err)
		return err
	}
	defer func() {
		// Ensure the database is sync'd and closed on shutdown.
		btcdLog.Infof("Gracefully shutting down the database...")
		db.Close()
	}()

	// Return now if an interrupt signal was triggered.
	if interruptRequested(interruptedChan) {
		return nil
	}

	// Drop indexes and exit if requested.
	//
	// NOTE: The order is important here because dropping the tx index also
	// drops the address index since it relies on it.
	if cfg.DropAddrIndex {
		if err := indexers.DropAddrIndex(db); err != nil {
			btcdLog.Errorf("%v", err)
			return err
		}

		return nil
	}
	if cfg.DropTxIndex {
		if err := indexers.DropTxIndex(db); err != nil {
			btcdLog.Errorf("%v", err)
			return err
		}

		return nil
	}

	// Create server and start it.
	server, err := newServer(cfg.Listeners, db, activeNetParams.Params)
	if err != nil {
		// TODO(oga) this logging could do with some beautifying.
		btcdLog.Errorf("Unable to start server on %v: %v",
			cfg.Listeners, err)
		return err
	}
	defer func() {
		btcdLog.Infof("Gracefully shutting down the server...")
		server.Stop()
		server.WaitForShutdown()
		srvrLog.Infof("Server shutdown complete")
	}()
	server.Start()
	if serverChan != nil {
		serverChan <- server
	}

	// Wait until the interrupt signal is received from an OS signal or
	// shutdown is requested through one of the subsystems such as the RPC
	// server.
	<-interruptedChan
	return nil
}
Beispiel #2
0
// btcdMain is the real main function for btcd.  It is necessary to work around
// the fact that deferred functions do not run when os.Exit() is called.  The
// optional serverChan parameter is mainly used by the service code to be
// notified with the server once it is setup so it can gracefully stop it when
// requested from the service control manager.
func btcdMain(serverChan chan<- *server) error {
	// Load configuration and parse command line.  This function also
	// initializes logging and configures it accordingly.
	tcfg, _, err := loadConfig()
	if err != nil {
		return err
	}
	cfg = tcfg
	defer backendLog.Flush()

	// Show version at startup.
	btcdLog.Infof("Version %s", version())

	// Enable http profiling server if requested.
	if cfg.Profile != "" {
		go func() {
			listenAddr := net.JoinHostPort("", cfg.Profile)
			btcdLog.Infof("Profile server listening on %s", listenAddr)
			profileRedirect := http.RedirectHandler("/debug/pprof",
				http.StatusSeeOther)
			http.Handle("/", profileRedirect)
			btcdLog.Errorf("%v", http.ListenAndServe(listenAddr, nil))
		}()
	}

	// Write cpu profile if requested.
	if cfg.CPUProfile != "" {
		f, err := os.Create(cfg.CPUProfile)
		if err != nil {
			btcdLog.Errorf("Unable to create cpu profile: %v", err)
			return err
		}
		pprof.StartCPUProfile(f)
		defer f.Close()
		defer pprof.StopCPUProfile()
	}

	// Perform upgrades to btcd as new versions require it.
	if err := doUpgrades(); err != nil {
		btcdLog.Errorf("%v", err)
		return err
	}

	// Load the block database.
	db, err := loadBlockDB()
	if err != nil {
		btcdLog.Errorf("%v", err)
		return err
	}
	defer db.Close()

	// Ensure the database is sync'd and closed on Ctrl+C.
	addInterruptHandler(func() {
		btcdLog.Infof("Gracefully shutting down the database...")
		db.Close()
	})

	// Drop indexes and exit if requested.
	//
	// NOTE: The order is important here because dropping the tx index also
	// drops the address index since it relies on it.
	if cfg.DropAddrIndex {
		if err := indexers.DropAddrIndex(db); err != nil {
			btcdLog.Errorf("%v", err)
			return err
		}

		return nil
	}
	if cfg.DropTxIndex {
		if err := indexers.DropTxIndex(db); err != nil {
			btcdLog.Errorf("%v", err)
			return err
		}

		return nil
	}

	// Create server and start it.
	server, err := newServer(cfg.Listeners, db, activeNetParams.Params)
	if err != nil {
		// TODO(oga) this logging could do with some beautifying.
		btcdLog.Errorf("Unable to start server on %v: %v",
			cfg.Listeners, err)
		return err
	}
	addInterruptHandler(func() {
		btcdLog.Infof("Gracefully shutting down the server...")
		server.Stop()
		server.WaitForShutdown()
	})
	server.Start()
	if serverChan != nil {
		serverChan <- server
	}

	// Monitor for graceful server shutdown and signal the main goroutine
	// when done.  This is done in a separate goroutine rather than waiting
	// directly so the main goroutine can be signaled for shutdown by either
	// a graceful shutdown or from the main interrupt handler.  This is
	// necessary since the main goroutine must be kept running long enough
	// for the interrupt handler goroutine to finish.
	go func() {
		server.WaitForShutdown()
		srvrLog.Infof("Server shutdown complete")
		shutdownChannel <- struct{}{}
	}()

	// Wait for shutdown signal from either a graceful server stop or from
	// the interrupt handler.
	<-shutdownChannel
	btcdLog.Info("Shutdown complete")
	return nil
}