Beispiel #1
0
func (archiver *Archiver) CopyFileWithTar(src, dst string) (err error) {
	logrus.Debugf("CopyFileWithTar(%s, %s)", src, dst)
	srcSt, err := os.Stat(src)
	if err != nil {
		return err
	}

	if srcSt.IsDir() {
		return fmt.Errorf("Can't copy a directory")
	}

	// Clean up the trailing slash. This must be done in an operating
	// system specific manner.
	if dst[len(dst)-1] == os.PathSeparator {
		dst = filepath.Join(dst, filepath.Base(src))
	}
	// Create the holding directory if necessary
	if err := system.MkdirAll(filepath.Dir(dst), 0700); err != nil && !os.IsExist(err) {
		return err
	}

	r, w := io.Pipe()
	errC := promise.Go(func() error {
		defer w.Close()

		srcF, err := os.Open(src)
		if err != nil {
			return err
		}
		defer srcF.Close()

		hdr, err := tar.FileInfoHeader(srcSt, "")
		if err != nil {
			return err
		}
		hdr.Name = filepath.Base(dst)
		hdr.Mode = int64(chmodTarEntry(os.FileMode(hdr.Mode)))

		tw := tar.NewWriter(w)
		defer tw.Close()
		if err := tw.WriteHeader(hdr); err != nil {
			return err
		}
		if _, err := io.Copy(tw, srcF); err != nil {
			return err
		}
		return nil
	})
	defer func() {
		if er := <-errC; err != nil {
			err = er
		}
	}()
	return archiver.Untar(r, filepath.Dir(dst), nil)
}
func mkdirAs(path string, mode os.FileMode, ownerUID, ownerGID int, mkAll, chownExisting bool) error {
	// make an array containing the original path asked for, plus (for mkAll == true)
	// all path components leading up to the complete path that don't exist before we MkdirAll
	// so that we can chown all of them properly at the end.  If chownExisting is false, we won't
	// chown the full directory path if it exists
	var paths []string
	if _, err := os.Stat(path); err != nil && os.IsNotExist(err) {
		paths = []string{path}
	} else if err == nil && chownExisting {
		if err := os.Chown(path, ownerUID, ownerGID); err != nil {
			return err
		}
		// short-circuit--we were called with an existing directory and chown was requested
		return nil
	} else if err == nil {
		// nothing to do; directory path fully exists already and chown was NOT requested
		return nil
	}

	if mkAll {
		// walk back to "/" looking for directories which do not exist
		// and add them to the paths array for chown after creation
		dirPath := path
		for {
			dirPath = filepath.Dir(dirPath)
			if dirPath == "/" {
				break
			}
			if _, err := os.Stat(dirPath); err != nil && os.IsNotExist(err) {
				paths = append(paths, dirPath)
			}
		}
		if err := system.MkdirAll(path, mode); err != nil && !os.IsExist(err) {
			return err
		}
	} else {
		if err := os.Mkdir(path, mode); err != nil && !os.IsExist(err) {
			return err
		}
	}
	// even if it existed, we will chown the requested path + any subpaths that
	// didn't exist when we called MkdirAll
	for _, pathComponent := range paths {
		if err := os.Chown(pathComponent, ownerUID, ownerGID); err != nil {
			return err
		}
	}
	return nil
}
// CopyWithTar creates a tar archive of filesystem path `src`, and
// unpacks it at filesystem path `dst`.
// The archive is streamed directly with fixed buffering and no
// intermediary disk IO.
func (archiver *Archiver) CopyWithTar(src, dst string) error {
	srcSt, err := os.Stat(src)
	if err != nil {
		return err
	}
	if !srcSt.IsDir() {
		return archiver.CopyFileWithTar(src, dst)
	}
	// Create dst, copy src's content into it
	logrus.Debugf("Creating dest directory: %s", dst)
	if err := system.MkdirAll(dst, 0755); err != nil {
		return err
	}
	logrus.Debugf("Calling TarUntar(%s, %s)", src, dst)
	return archiver.TarUntar(src, dst)
}
Beispiel #4
0
// Setup sets up a mount point by either mounting the volume if it is
// configured, or creating the source directory if supplied.
func (m *MountPoint) Setup() (string, error) {
	if m.Volume != nil {
		return m.Volume.Mount()
	}
	if len(m.Source) > 0 {
		if _, err := os.Stat(m.Source); err != nil {
			if !os.IsNotExist(err) {
				return "", err
			}
			if runtime.GOOS != "windows" { // Windows does not have deprecation issues here
				logrus.Warnf("Auto-creating non-existant volume host path %s, this is deprecated and will be removed soon", m.Source)
				if err := system.MkdirAll(m.Source, 0755); err != nil {
					return "", err
				}
			}
		}
		return m.Source, nil
	}
	return "", derr.ErrorCodeMountSetup
}
// Platforms such as Windows do not support the UID/GID concept. So make this
// just a wrapper around system.MkdirAll.
func mkdirAs(path string, mode os.FileMode, ownerUID, ownerGID int, mkAll, chownExisting bool) error {
	if err := system.MkdirAll(path, mode); err != nil && !os.IsExist(err) {
		return err
	}
	return nil
}
Beispiel #6
0
// UnpackLayer unpack `layer` to a `dest`. The stream `layer` can be
// compressed or uncompressed.
// Returns the size in bytes of the contents of the layer.
func UnpackLayer(dest string, layer Reader, options *TarOptions) (size int64, err error) {
	tr := tar.NewReader(layer)
	trBuf := pools.BufioReader32KPool.Get(tr)
	defer pools.BufioReader32KPool.Put(trBuf)

	var dirs []*tar.Header

	if options == nil {
		options = &TarOptions{}
	}
	if options.ExcludePatterns == nil {
		options.ExcludePatterns = []string{}
	}
	remappedRootUID, remappedRootGID, err := idtools.GetRootUIDGID(options.UIDMaps, options.GIDMaps)
	if err != nil {
		return 0, err
	}

	aufsTempdir := ""
	aufsHardlinks := make(map[string]*tar.Header)

	if options == nil {
		options = &TarOptions{}
	}
	// Iterate through the files in the archive.
	for {
		hdr, err := tr.Next()
		if err == io.EOF {
			// end of tar archive
			break
		}
		if err != nil {
			return 0, err
		}

		size += hdr.Size

		// Normalize name, for safety and for a simple is-root check
		hdr.Name = filepath.Clean(hdr.Name)

		// Windows does not support filenames with colons in them. Ignore
		// these files. This is not a problem though (although it might
		// appear that it is). Let's suppose a client is running docker pull.
		// The daemon it points to is Windows. Would it make sense for the
		// client to be doing a docker pull Ubuntu for example (which has files
		// with colons in the name under /usr/share/man/man3)? No, absolutely
		// not as it would really only make sense that they were pulling a
		// Windows image. However, for development, it is necessary to be able
		// to pull Linux images which are in the repository.
		//
		// TODO Windows. Once the registry is aware of what images are Windows-
		// specific or Linux-specific, this warning should be changed to an error
		// to cater for the situation where someone does manage to upload a Linux
		// image but have it tagged as Windows inadvertently.
		if runtime.GOOS == "windows" {
			if strings.Contains(hdr.Name, ":") {
				logrus.Warnf("Windows: Ignoring %s (is this a Linux image?)", hdr.Name)
				continue
			}
		}

		// Note as these operations are platform specific, so must the slash be.
		if !strings.HasSuffix(hdr.Name, string(os.PathSeparator)) {
			// Not the root directory, ensure that the parent directory exists.
			// This happened in some tests where an image had a tarfile without any
			// parent directories.
			parent := filepath.Dir(hdr.Name)
			parentPath := filepath.Join(dest, parent)

			if _, err := os.Lstat(parentPath); err != nil && os.IsNotExist(err) {
				err = system.MkdirAll(parentPath, 0600)
				if err != nil {
					return 0, err
				}
			}
		}

		// Skip AUFS metadata dirs
		if strings.HasPrefix(hdr.Name, WhiteoutMetaPrefix) {
			// Regular files inside /.wh..wh.plnk can be used as hardlink targets
			// We don't want this directory, but we need the files in them so that
			// such hardlinks can be resolved.
			if strings.HasPrefix(hdr.Name, WhiteoutLinkDir) && hdr.Typeflag == tar.TypeReg {
				basename := filepath.Base(hdr.Name)
				aufsHardlinks[basename] = hdr
				if aufsTempdir == "" {
					if aufsTempdir, err = ioutil.TempDir("", "dockerplnk"); err != nil {
						return 0, err
					}
					defer os.RemoveAll(aufsTempdir)
				}
				if err := createTarFile(filepath.Join(aufsTempdir, basename), dest, hdr, tr, true, nil); err != nil {
					return 0, err
				}
			}

			if hdr.Name != WhiteoutOpaqueDir {
				continue
			}
		}
		path := filepath.Join(dest, hdr.Name)
		rel, err := filepath.Rel(dest, path)
		if err != nil {
			return 0, err
		}

		// Note as these operations are platform specific, so must the slash be.
		if strings.HasPrefix(rel, ".."+string(os.PathSeparator)) {
			return 0, breakoutError(fmt.Errorf("%q is outside of %q", hdr.Name, dest))
		}
		base := filepath.Base(path)

		if strings.HasPrefix(base, WhiteoutPrefix) {
			dir := filepath.Dir(path)
			if base == WhiteoutOpaqueDir {
				fi, err := os.Lstat(dir)
				if err != nil && !os.IsNotExist(err) {
					return 0, err
				}
				if err := os.RemoveAll(dir); err != nil {
					return 0, err
				}
				if err := os.Mkdir(dir, fi.Mode()&os.ModePerm); err != nil {
					return 0, err
				}
			} else {
				originalBase := base[len(WhiteoutPrefix):]
				originalPath := filepath.Join(dir, originalBase)
				if err := os.RemoveAll(originalPath); err != nil {
					return 0, err
				}
			}
		} else {
			// If path exits we almost always just want to remove and replace it.
			// The only exception is when it is a directory *and* the file from
			// the layer is also a directory. Then we want to merge them (i.e.
			// just apply the metadata from the layer).
			if fi, err := os.Lstat(path); err == nil {
				if !(fi.IsDir() && hdr.Typeflag == tar.TypeDir) {
					if err := os.RemoveAll(path); err != nil {
						return 0, err
					}
				}
			}

			trBuf.Reset(tr)
			srcData := io.Reader(trBuf)
			srcHdr := hdr

			// Hard links into /.wh..wh.plnk don't work, as we don't extract that directory, so
			// we manually retarget these into the temporary files we extracted them into
			if hdr.Typeflag == tar.TypeLink && strings.HasPrefix(filepath.Clean(hdr.Linkname), WhiteoutLinkDir) {
				linkBasename := filepath.Base(hdr.Linkname)
				srcHdr = aufsHardlinks[linkBasename]
				if srcHdr == nil {
					return 0, fmt.Errorf("Invalid aufs hardlink")
				}
				tmpFile, err := os.Open(filepath.Join(aufsTempdir, linkBasename))
				if err != nil {
					return 0, err
				}
				defer tmpFile.Close()
				srcData = tmpFile
			}

			// if the options contain a uid & gid maps, convert header uid/gid
			// entries using the maps such that lchown sets the proper mapped
			// uid/gid after writing the file. We only perform this mapping if
			// the file isn't already owned by the remapped root UID or GID, as
			// that specific uid/gid has no mapping from container -> host, and
			// those files already have the proper ownership for inside the
			// container.
			if srcHdr.Uid != remappedRootUID {
				xUID, err := idtools.ToHost(srcHdr.Uid, options.UIDMaps)
				if err != nil {
					return 0, err
				}
				srcHdr.Uid = xUID
			}
			if srcHdr.Gid != remappedRootGID {
				xGID, err := idtools.ToHost(srcHdr.Gid, options.GIDMaps)
				if err != nil {
					return 0, err
				}
				srcHdr.Gid = xGID
			}
			if err := createTarFile(path, dest, srcHdr, srcData, true, nil); err != nil {
				return 0, err
			}

			// Directory mtimes must be handled at the end to avoid further
			// file creation in them to modify the directory mtime
			if hdr.Typeflag == tar.TypeDir {
				dirs = append(dirs, hdr)
			}
		}
	}

	for _, hdr := range dirs {
		path := filepath.Join(dest, hdr.Name)
		if err := system.Chtimes(path, hdr.AccessTime, hdr.ModTime); err != nil {
			return 0, err
		}
	}

	return size, nil
}
// CopyFileWithTar emulates the behavior of the 'cp' command-line
// for a single file. It copies a regular file from path `src` to
// path `dst`, and preserves all its metadata.
func (archiver *Archiver) CopyFileWithTar(src, dst string) (err error) {
	logrus.Debugf("CopyFileWithTar(%s, %s)", src, dst)
	srcSt, err := os.Stat(src)
	if err != nil {
		return err
	}

	if srcSt.IsDir() {
		return fmt.Errorf("Can't copy a directory")
	}

	// Clean up the trailing slash. This must be done in an operating
	// system specific manner.
	if dst[len(dst)-1] == os.PathSeparator {
		dst = filepath.Join(dst, filepath.Base(src))
	}
	// Create the holding directory if necessary
	if err := system.MkdirAll(filepath.Dir(dst), 0700); err != nil {
		return err
	}

	r, w := io.Pipe()
	errC := promise.Go(func() error {
		defer w.Close()

		srcF, err := os.Open(src)
		if err != nil {
			return err
		}
		defer srcF.Close()

		hdr, err := tar.FileInfoHeader(srcSt, "")
		if err != nil {
			return err
		}
		hdr.Name = filepath.Base(dst)
		hdr.Mode = int64(chmodTarEntry(os.FileMode(hdr.Mode)))

		remappedRootUID, remappedRootGID, err := idtools.GetRootUIDGID(archiver.UIDMaps, archiver.GIDMaps)
		if err != nil {
			return err
		}

		// only perform mapping if the file being copied isn't already owned by the
		// uid or gid of the remapped root in the container
		if remappedRootUID != hdr.Uid {
			xUID, err := idtools.ToHost(hdr.Uid, archiver.UIDMaps)
			if err != nil {
				return err
			}
			hdr.Uid = xUID
		}
		if remappedRootGID != hdr.Gid {
			xGID, err := idtools.ToHost(hdr.Gid, archiver.GIDMaps)
			if err != nil {
				return err
			}
			hdr.Gid = xGID
		}

		tw := tar.NewWriter(w)
		defer tw.Close()
		if err := tw.WriteHeader(hdr); err != nil {
			return err
		}
		if _, err := io.Copy(tw, srcF); err != nil {
			return err
		}
		return nil
	})
	defer func() {
		if er := <-errC; err != nil {
			err = er
		}
	}()

	err = archiver.Untar(r, filepath.Dir(dst), nil)
	if err != nil {
		r.CloseWithError(err)
	}
	return err
}
// Unpack unpacks the decompressedArchive to dest with options.
func Unpack(decompressedArchive io.Reader, dest string, options *TarOptions) error {
	tr := tar.NewReader(decompressedArchive)
	trBuf := pools.BufioReader32KPool.Get(nil)
	defer pools.BufioReader32KPool.Put(trBuf)

	var dirs []*tar.Header
	remappedRootUID, remappedRootGID, err := idtools.GetRootUIDGID(options.UIDMaps, options.GIDMaps)
	if err != nil {
		return err
	}

	// Iterate through the files in the archive.
loop:
	for {
		hdr, err := tr.Next()
		if err == io.EOF {
			// end of tar archive
			break
		}
		if err != nil {
			return err
		}

		// Normalize name, for safety and for a simple is-root check
		// This keeps "../" as-is, but normalizes "/../" to "/". Or Windows:
		// This keeps "..\" as-is, but normalizes "\..\" to "\".
		hdr.Name = filepath.Clean(hdr.Name)

		for _, exclude := range options.ExcludePatterns {
			if strings.HasPrefix(hdr.Name, exclude) {
				continue loop
			}
		}

		// After calling filepath.Clean(hdr.Name) above, hdr.Name will now be in
		// the filepath format for the OS on which the daemon is running. Hence
		// the check for a slash-suffix MUST be done in an OS-agnostic way.
		if !strings.HasSuffix(hdr.Name, string(os.PathSeparator)) {
			// Not the root directory, ensure that the parent directory exists
			parent := filepath.Dir(hdr.Name)
			parentPath := filepath.Join(dest, parent)
			if _, err := os.Lstat(parentPath); err != nil && os.IsNotExist(err) {
				err = system.MkdirAll(parentPath, 0777)
				if err != nil {
					return err
				}
			}
		}

		path := filepath.Join(dest, hdr.Name)
		rel, err := filepath.Rel(dest, path)
		if err != nil {
			return err
		}
		if strings.HasPrefix(rel, ".."+string(os.PathSeparator)) {
			return breakoutError(fmt.Errorf("%q is outside of %q", hdr.Name, dest))
		}

		// If path exits we almost always just want to remove and replace it
		// The only exception is when it is a directory *and* the file from
		// the layer is also a directory. Then we want to merge them (i.e.
		// just apply the metadata from the layer).
		if fi, err := os.Lstat(path); err == nil {
			if options.NoOverwriteDirNonDir && fi.IsDir() && hdr.Typeflag != tar.TypeDir {
				// If NoOverwriteDirNonDir is true then we cannot replace
				// an existing directory with a non-directory from the archive.
				return fmt.Errorf("cannot overwrite directory %q with non-directory %q", path, dest)
			}

			if options.NoOverwriteDirNonDir && !fi.IsDir() && hdr.Typeflag == tar.TypeDir {
				// If NoOverwriteDirNonDir is true then we cannot replace
				// an existing non-directory with a directory from the archive.
				return fmt.Errorf("cannot overwrite non-directory %q with directory %q", path, dest)
			}

			if fi.IsDir() && hdr.Name == "." {
				continue
			}

			if !(fi.IsDir() && hdr.Typeflag == tar.TypeDir) {
				if err := os.RemoveAll(path); err != nil {
					return err
				}
			}
		}
		trBuf.Reset(tr)

		// if the options contain a uid & gid maps, convert header uid/gid
		// entries using the maps such that lchown sets the proper mapped
		// uid/gid after writing the file. We only perform this mapping if
		// the file isn't already owned by the remapped root UID or GID, as
		// that specific uid/gid has no mapping from container -> host, and
		// those files already have the proper ownership for inside the
		// container.
		if hdr.Uid != remappedRootUID {
			xUID, err := idtools.ToHost(hdr.Uid, options.UIDMaps)
			if err != nil {
				return err
			}
			hdr.Uid = xUID
		}
		if hdr.Gid != remappedRootGID {
			xGID, err := idtools.ToHost(hdr.Gid, options.GIDMaps)
			if err != nil {
				return err
			}
			hdr.Gid = xGID
		}

		if err := createTarFile(path, dest, hdr, trBuf, !options.NoLchown, options.ChownOpts); err != nil {
			return err
		}

		// Directory mtimes must be handled at the end to avoid further
		// file creation in them to modify the directory mtime
		if hdr.Typeflag == tar.TypeDir {
			dirs = append(dirs, hdr)
		}
	}

	for _, hdr := range dirs {
		path := filepath.Join(dest, hdr.Name)

		if err := system.Chtimes(path, hdr.AccessTime, hdr.ModTime); err != nil {
			return err
		}
	}
	return nil
}