func replicaGCShouldQueueImpl(
	now, lastCheck, lastActivity hlc.Timestamp, isCandidate bool,
) (bool, float64) {
	timeout := ReplicaGCQueueInactivityThreshold
	priority := replicaGCPriorityDefault

	if isCandidate {
		// If the range is a candidate (which happens if its former replica set
		// ignores it), let it expire much earlier.
		timeout = ReplicaGCQueueCandidateTimeout
		priority = replicaGCPriorityCandidate
	} else if now.Less(lastCheck.Add(ReplicaGCQueueInactivityThreshold.Nanoseconds(), 0)) {
		// Return false immediately if the previous check was less than the
		// check interval in the past. Note that we don't do this if the
		// replica is in candidate state, in which case we want to be more
		// aggressive - a failed rebalance attempt could have checked this
		// range, and candidate state suggests that a retry succeeded. See
		// #7489.
		return false, 0
	}

	shouldQ := lastActivity.Add(timeout.Nanoseconds(), 0).Less(now)

	if !shouldQ {
		return false, 0
	}

	return shouldQ, priority
}
// leaseStatus returns lease status. If the lease is epoch-based,
// the liveness field will be set to the liveness used to compute
// its state, unless state == leaseError.
//
// - The lease is considered valid if the timestamp is covered by the
//   supplied lease. This is determined differently depending on the
//   lease properties. For expiration-based leases, the timestamp is
//   covered if it's less than the expiration (minus the maximum
//   clock offset). For epoch-based "node liveness" leases, the lease
//   epoch must match the owner node's liveness epoch -AND- the
//   timestamp must be within the node's liveness expiration (also
//   minus the maximum clock offset).
//
//   To be valid, a lease which contains a valid ProposedTS must have
//   a proposed timestamp greater than the minimum proposed timestamp,
//   which prevents a restarted process from serving commands, since
//   the command queue has been wiped through the restart.
//
// - The lease is considered in stasis if the timestamp is within the
//   maximum clock offset window of the lease expiration.
//
// - The lease is considered expired in all other cases.
//
// The maximum clock offset must always be taken into consideration to
// avoid a failure of linearizability on a single register during
// lease changes. Without that stasis period, the following could
// occur:
//
// * a range lease gets committed on the new lease holder (but not the old).
// * client proposes and commits a write on new lease holder (with a
//   timestamp just greater than the expiration of the old lease).
// * client tries to read what it wrote, but hits a slow coordinator
//   (which assigns a timestamp covered by the old lease).
// * the read is served by the old lease holder (which has not
//   processed the change in lease holdership).
// * the client fails to read their own write.
func (r *Replica) leaseStatus(
	lease *roachpb.Lease, timestamp, minProposedTS hlc.Timestamp,
) LeaseStatus {
	status := LeaseStatus{timestamp: timestamp, lease: lease}
	if lease == nil {
		status.state = leaseExpired
		return status
	}
	var expiration hlc.Timestamp
	if lease.Type() == roachpb.LeaseExpiration {
		expiration = lease.Expiration
	} else {
		var err error
		status.liveness, err = r.store.cfg.NodeLiveness.GetLiveness(lease.Replica.NodeID)
		if err != nil || status.liveness.Epoch < *lease.Epoch {
			// If lease validity can't be determined (e.g. gossip is down
			// and liveness info isn't available for owner), we can neither
			// use the lease nor do we want to attempt to acquire it.
			status.state = leaseError
			return status
		}
		if status.liveness.Epoch > *lease.Epoch {
			status.state = leaseExpired
			return status
		}
		expiration = status.liveness.Expiration
	}
	stasis := expiration.Add(-int64(r.store.Clock().MaxOffset()), 0)
	if timestamp.Less(stasis) {
		status.state = leaseValid
		// If the replica owns the lease, additional verify that the lease's
		// proposed timestamp is not earlier than the min proposed timestamp.
		if lease.Replica.StoreID == r.store.StoreID() &&
			lease.ProposedTS != nil && lease.ProposedTS.Less(minProposedTS) {
			status.state = leaseProscribed
		}
	} else if timestamp.Less(expiration) {
		status.state = leaseStasis
	} else {
		status.state = leaseExpired
	}
	return status
}
Beispiel #3
0
// NewTransaction creates a new transaction. The transaction key is
// composed using the specified baseKey (for locality with data
// affected by the transaction) and a random ID to guarantee
// uniqueness. The specified user-level priority is combined with a
// randomly chosen value to yield a final priority, used to settle
// write conflicts in a way that avoids starvation of long-running
// transactions (see Replica.PushTxn).
func NewTransaction(
	name string,
	baseKey Key,
	userPriority UserPriority,
	isolation enginepb.IsolationType,
	now hlc.Timestamp,
	maxOffset int64,
) *Transaction {
	u := uuid.MakeV4()

	return &Transaction{
		TxnMeta: enginepb.TxnMeta{
			Key:       baseKey,
			ID:        &u,
			Isolation: isolation,
			Timestamp: now,
			Priority:  MakePriority(userPriority),
			Sequence:  1,
		},
		Name:          name,
		OrigTimestamp: now,
		MaxTimestamp:  now.Add(maxOffset, 0),
	}
}
// InitOrJoinRequest executes a RequestLease command asynchronously and returns a
// channel on which the result will be posted. If there's already a request in
// progress, we join in waiting for the results of that request.
// It is an error to call InitOrJoinRequest() while a request is in progress
// naming another replica as lease holder.
//
// replica is used to schedule and execute async work (proposing a RequestLease
// command). replica.mu is locked when delivering results, so calls from the
// replica happen either before or after a result for a pending request has
// happened.
//
// transfer needs to be set if the request represents a lease transfer (as
// opposed to an extension, or acquiring the lease when none is held).
//
// Note: Once this function gets a context to be used for cancellation, instead
// of replica.store.Stopper().ShouldQuiesce(), care will be needed for cancelling
// the Raft command, similar to replica.addWriteCmd.
func (p *pendingLeaseRequest) InitOrJoinRequest(
	replica *Replica,
	nextLeaseHolder roachpb.ReplicaDescriptor,
	timestamp hlc.Timestamp,
	startKey roachpb.Key,
	transfer bool,
) <-chan *roachpb.Error {
	if nextLease, ok := p.RequestPending(); ok {
		if nextLease.Replica.ReplicaID == nextLeaseHolder.ReplicaID {
			// Join a pending request asking for the same replica to become lease
			// holder.
			return p.JoinRequest()
		}
		llChan := make(chan *roachpb.Error, 1)
		// We can't join the request in progress.
		llChan <- roachpb.NewErrorf("request for different replica in progress "+
			"(requesting: %+v, in progress: %+v)",
			nextLeaseHolder.ReplicaID, nextLease.Replica.ReplicaID)
		return llChan
	}
	llChan := make(chan *roachpb.Error, 1)
	// No request in progress. Let's propose a Lease command asynchronously.
	// TODO(tschottdorf): get duration from configuration, either as a
	// config flag or, later, dynamically adjusted.
	startStasis := timestamp.Add(int64(replica.store.cfg.RangeLeaseActiveDuration), 0)
	expiration := startStasis.Add(int64(replica.store.Clock().MaxOffset()), 0)
	reqSpan := roachpb.Span{
		Key: startKey,
	}
	var leaseReq roachpb.Request
	now := replica.store.Clock().Now()
	reqLease := roachpb.Lease{
		Start:       timestamp,
		StartStasis: startStasis,
		Expiration:  expiration,
		Replica:     nextLeaseHolder,
		ProposedTS:  &now,
	}
	if transfer {
		leaseReq = &roachpb.TransferLeaseRequest{
			Span:  reqSpan,
			Lease: reqLease,
		}
	} else {
		leaseReq = &roachpb.RequestLeaseRequest{
			Span:  reqSpan,
			Lease: reqLease,
		}
	}
	if replica.store.Stopper().RunAsyncTask(context.TODO(), func(ctx context.Context) {
		ctx = replica.AnnotateCtx(ctx)
		// Propose a RequestLease command and wait for it to apply.
		ba := roachpb.BatchRequest{}
		ba.Timestamp = replica.store.Clock().Now()
		ba.RangeID = replica.RangeID
		ba.Add(leaseReq)
		if log.V(2) {
			log.Infof(ctx, "sending lease request %v", leaseReq)
		}
		_, pErr := replica.Send(ctx, ba)
		// We reset our state below regardless of whether we've gotten an error or
		// not, but note that an error is ambiguous - there's no guarantee that the
		// transfer will not still apply. That's OK, however, as the "in transfer"
		// state maintained by the pendingLeaseRequest is not relied on for
		// correctness (see replica.mu.minLeaseProposedTS), and resetting the state
		// is beneficial as it'll allow the replica to attempt to transfer again or
		// extend the existing lease in the future.

		// Send result of lease to all waiter channels.
		replica.mu.Lock()
		defer replica.mu.Unlock()
		for _, llChan := range p.llChans {
			// Don't send the same transaction object twice; this can lead to races.
			if pErr != nil {
				pErrClone := *pErr
				pErrClone.SetTxn(pErr.GetTxn())
				llChan <- &pErrClone
			} else {
				llChan <- nil
			}
		}
		p.llChans = p.llChans[:0]
		p.nextLease = roachpb.Lease{}
	}) != nil {
		// We failed to start the asynchronous task. Send a blank NotLeaseHolderError
		// back to indicate that we have no idea who the range lease holder might
		// be; we've withdrawn from active duty.
		llChan <- roachpb.NewError(
			newNotLeaseHolderError(nil, replica.store.StoreID(), replica.mu.state.Desc))
		return llChan
	}
	p.llChans = append(p.llChans, llChan)
	p.nextLease = reqLease
	return llChan
}
Beispiel #5
0
// InitOrJoinRequest executes a RequestLease command asynchronously and returns a
// channel on which the result will be posted. If there's already a request in
// progress, we join in waiting for the results of that request.
// It is an error to call InitOrJoinRequest() while a request is in progress
// naming another replica as lease holder.
//
// replica is used to schedule and execute async work (proposing a RequestLease
// command). replica.mu is locked when delivering results, so calls from the
// replica happen either before or after a result for a pending request has
// happened.
//
// transfer needs to be set if the request represents a lease transfer (as
// opposed to an extension, or acquiring the lease when none is held).
//
// Note: Once this function gets a context to be used for cancellation, instead
// of replica.store.Stopper().ShouldQuiesce(), care will be needed for cancelling
// the Raft command, similar to replica.addWriteCmd.
func (p *pendingLeaseRequest) InitOrJoinRequest(
	replica *Replica,
	nextLeaseHolder roachpb.ReplicaDescriptor,
	timestamp hlc.Timestamp,
	startKey roachpb.Key,
	transfer bool,
) <-chan *roachpb.Error {
	if nextLease, ok := p.RequestPending(); ok {
		if nextLease.Replica.ReplicaID == nextLeaseHolder.ReplicaID {
			// Join a pending request asking for the same replica to become lease
			// holder.
			return p.JoinRequest()
		}
		llChan := make(chan *roachpb.Error, 1)
		// We can't join the request in progress.
		llChan <- roachpb.NewErrorf("request for different replica in progress "+
			"(requesting: %+v, in progress: %+v)",
			nextLeaseHolder.ReplicaID, nextLease.Replica.ReplicaID)
		return llChan
	}
	llChan := make(chan *roachpb.Error, 1)
	// No request in progress. Let's propose a Lease command asynchronously.
	// TODO(tschottdorf): get duration from configuration, either as a
	// config flag or, later, dynamically adjusted.
	startStasis := timestamp.Add(int64(replica.store.cfg.RangeLeaseActiveDuration), 0)
	expiration := startStasis.Add(int64(replica.store.Clock().MaxOffset()), 0)
	reqSpan := roachpb.Span{
		Key: startKey,
	}
	var leaseReq roachpb.Request
	reqLease := roachpb.Lease{
		Start:       timestamp,
		StartStasis: startStasis,
		Expiration:  expiration,
		Replica:     nextLeaseHolder,
	}
	if transfer {
		leaseReq = &roachpb.TransferLeaseRequest{
			Span:  reqSpan,
			Lease: reqLease,
		}
	} else {
		leaseReq = &roachpb.RequestLeaseRequest{
			Span:  reqSpan,
			Lease: reqLease,
		}
	}
	if replica.store.Stopper().RunAsyncTask(context.TODO(), func(ctx context.Context) {
		ctx = replica.AnnotateCtx(ctx)
		// Propose a RequestLease command and wait for it to apply.
		ba := roachpb.BatchRequest{}
		ba.Timestamp = replica.store.Clock().Now()
		ba.RangeID = replica.RangeID
		ba.Add(leaseReq)
		if log.V(2) {
			log.Infof(ctx, "sending lease request %v", leaseReq)
		}
		_, pErr := replica.Send(ctx, ba)

		// Send result of lease to all waiter channels.
		replica.mu.Lock()
		defer replica.mu.Unlock()
		for i, llChan := range p.llChans {
			// Don't send the same pErr object twice; this can lead to races. We could
			// clone every time but it's more efficient to send pErr itself to one of
			// the channels (the last one; if we send it earlier the race can still
			// happen).
			if i == len(p.llChans)-1 {
				llChan <- pErr
			} else {
				llChan <- protoutil.Clone(pErr).(*roachpb.Error) // works with `nil`
			}
		}
		p.llChans = p.llChans[:0]
		p.nextLease = roachpb.Lease{}
	}) != nil {
		// We failed to start the asynchronous task. Send a blank NotLeaseHolderError
		// back to indicate that we have no idea who the range lease holder might
		// be; we've withdrawn from active duty.
		llChan <- roachpb.NewError(
			newNotLeaseHolderError(nil, replica.store.StoreID(), replica.mu.state.Desc))
		return llChan
	}
	p.llChans = append(p.llChans, llChan)
	p.nextLease = reqLease
	return llChan
}
Beispiel #6
0
// RunGC runs garbage collection for the specified descriptor on the provided
// Engine (which is not mutated). It uses the provided functions pushTxnFn and
// resolveIntentsFn to clarify the true status of and clean up after encountered
// transactions. It returns a slice of gc'able keys from the data, transaction,
// and abort spans.
func RunGC(
	ctx context.Context,
	desc *roachpb.RangeDescriptor,
	snap engine.Reader,
	now hlc.Timestamp,
	policy config.GCPolicy,
	pushTxnFn pushFunc,
	resolveIntentsFn resolveFunc,
) ([]roachpb.GCRequest_GCKey, GCInfo, error) {

	iter := NewReplicaDataIterator(desc, snap, true /* replicatedOnly */)
	defer iter.Close()

	var infoMu = lockableGCInfo{}
	infoMu.Policy = policy
	infoMu.Now = now

	{
		realResolveIntentsFn := resolveIntentsFn
		resolveIntentsFn = func(intents []roachpb.Intent, poison bool, wait bool) (err error) {
			defer func() {
				infoMu.Lock()
				infoMu.ResolveTotal += len(intents)
				if err == nil {
					infoMu.ResolveSuccess += len(intents)
				}
				infoMu.Unlock()
			}()
			return realResolveIntentsFn(intents, poison, wait)
		}
		realPushTxnFn := pushTxnFn
		pushTxnFn = func(ts hlc.Timestamp, txn *roachpb.Transaction, typ roachpb.PushTxnType) {
			infoMu.Lock()
			infoMu.PushTxn++
			infoMu.Unlock()
			realPushTxnFn(ts, txn, typ)
		}
	}

	// Compute intent expiration (intent age at which we attempt to resolve).
	intentExp := now
	intentExp.WallTime -= intentAgeThreshold.Nanoseconds()
	txnExp := now
	txnExp.WallTime -= txnCleanupThreshold.Nanoseconds()
	abortSpanGCThreshold := now.Add(-int64(abortCacheAgeThreshold), 0)

	gc := engine.MakeGarbageCollector(now, policy)
	infoMu.Threshold = gc.Threshold
	infoMu.TxnSpanGCThreshold = txnExp

	var gcKeys []roachpb.GCRequest_GCKey
	var expBaseKey roachpb.Key
	var keys []engine.MVCCKey
	var vals [][]byte

	// Maps from txn ID to txn and intent key slice.
	txnMap := map[uuid.UUID]*roachpb.Transaction{}
	intentSpanMap := map[uuid.UUID][]roachpb.Span{}

	// processKeysAndValues is invoked with each key and its set of
	// values. Intents older than the intent age threshold are sent for
	// resolution and values after the MVCC metadata, and possible
	// intent, are sent for garbage collection.
	processKeysAndValues := func() {
		// If there's more than a single value for the key, possibly send for GC.
		if len(keys) > 1 {
			meta := &enginepb.MVCCMetadata{}
			if err := proto.Unmarshal(vals[0], meta); err != nil {
				log.Errorf(ctx, "unable to unmarshal MVCC metadata for key %q: %s", keys[0], err)
			} else {
				// In the event that there's an active intent, send for
				// intent resolution if older than the threshold.
				startIdx := 1
				if meta.Txn != nil {
					// Keep track of intent to resolve if older than the intent
					// expiration threshold.
					if meta.Timestamp.Less(intentExp) {
						txnID := *meta.Txn.ID
						txn := &roachpb.Transaction{
							TxnMeta: *meta.Txn,
						}
						txnMap[txnID] = txn
						infoMu.IntentsConsidered++
						intentSpanMap[txnID] = append(intentSpanMap[txnID], roachpb.Span{Key: expBaseKey})
					}
					// With an active intent, GC ignores MVCC metadata & intent value.
					startIdx = 2
				}
				// See if any values may be GC'd.
				if gcTS := gc.Filter(keys[startIdx:], vals[startIdx:]); !gcTS.Equal(hlc.ZeroTimestamp) {
					// TODO(spencer): need to split the requests up into
					// multiple requests in the event that more than X keys
					// are added to the request.
					gcKeys = append(gcKeys, roachpb.GCRequest_GCKey{Key: expBaseKey, Timestamp: gcTS})
				}
			}
		}
	}

	// Iterate through the keys and values of this replica's range.
	for ; iter.Valid(); iter.Next() {
		iterKey := iter.Key()
		if !iterKey.IsValue() || !iterKey.Key.Equal(expBaseKey) {
			// Moving to the next key (& values).
			processKeysAndValues()
			expBaseKey = iterKey.Key
			if !iterKey.IsValue() {
				keys = []engine.MVCCKey{iter.Key()}
				vals = [][]byte{iter.Value()}
				continue
			}
			// An implicit metadata.
			keys = []engine.MVCCKey{engine.MakeMVCCMetadataKey(iterKey.Key)}
			// A nil value for the encoded MVCCMetadata. This will unmarshal to an
			// empty MVCCMetadata which is sufficient for processKeysAndValues to
			// determine that there is no intent.
			vals = [][]byte{nil}
		}
		keys = append(keys, iter.Key())
		vals = append(vals, iter.Value())
	}
	if iter.Error() != nil {
		return nil, GCInfo{}, iter.Error()
	}
	// Handle last collected set of keys/vals.
	processKeysAndValues()

	infoMu.IntentTxns = len(txnMap)
	infoMu.NumKeysAffected = len(gcKeys)

	txnKeys, err := processTransactionTable(ctx, snap, desc, txnMap, txnExp, &infoMu, resolveIntentsFn)
	if err != nil {
		return nil, GCInfo{}, err
	}

	// From now on, all newly added keys are range-local.
	// TODO(tschottdorf): Might need to use two requests at some point since we
	// hard-coded the full non-local key range in the header, but that does
	// not take into account the range-local keys. It will be OK as long as
	// we send directly to the Replica, though.
	gcKeys = append(gcKeys, txnKeys...)

	// Process push transactions in parallel.
	var wg sync.WaitGroup
	sem := make(chan struct{}, gcTaskLimit)
	for _, txn := range txnMap {
		if txn.Status != roachpb.PENDING {
			continue
		}
		wg.Add(1)
		sem <- struct{}{}
		// Avoid passing loop variable into closure.
		txnCopy := txn
		go func() {
			defer func() {
				<-sem
				wg.Done()
			}()
			pushTxnFn(now, txnCopy, roachpb.PUSH_ABORT)
		}()
	}
	wg.Wait()

	// Resolve all intents.
	var intents []roachpb.Intent
	for txnID, txn := range txnMap {
		if txn.Status != roachpb.PENDING {
			for _, intent := range intentSpanMap[txnID] {
				intents = append(intents, roachpb.Intent{Span: intent, Status: txn.Status, Txn: txn.TxnMeta})
			}
		}
	}

	if err := resolveIntentsFn(intents, true /* wait */, false /* !poison */); err != nil {
		return nil, GCInfo{}, err
	}

	// Clean up the abort cache.
	gcKeys = append(gcKeys, processAbortCache(
		ctx, snap, desc.RangeID, abortSpanGCThreshold, &infoMu, pushTxnFn)...)
	return gcKeys, infoMu.GCInfo, nil
}