// send runs the specified calls synchronously in a single batch and
// returns any errors.
func (db *DB) send(calls ...proto.Call) (pErr *proto.Error) {
if len(calls) == 0 {
return nil
}
if len(calls) == 1 {
c := calls[0]
// We only send BatchRequest. Everything else needs to go into one.
if _, ok := calls[0].Args.(*proto.BatchRequest); ok {
if c.Args.Header().UserPriority == nil && db.userPriority != 0 {
c.Args.Header().UserPriority = gogoproto.Int32(db.userPriority)
}
resetClientCmdID(c.Args)
_ = SendCall(db.sender, c)
pErr = c.Reply.Header().Error
if pErr != nil {
if log.V(1) {
log.Infof("failed %s: %s", c.Method(), pErr)
}
} else if c.Post != nil {
pErr = proto.NewError(c.Post())
}
return pErr
}
}
ba, br := &proto.BatchRequest{}, &proto.BatchResponse{}
for _, call := range calls {
ba.Add(call.Args)
}
pErr = db.send(proto.Call{Args: ba, Reply: br})
// Recover from protobuf merge panics.
defer func() {
if r := recover(); r != nil {
// Take care to log merge error and to return it if no error has
// already been set.
mergeErr := util.Errorf("unable to merge response: %s", r)
log.Error(mergeErr)
if pErr == nil {
pErr = proto.NewError(mergeErr)
}
}
}()
// Transfer individual responses from batch response to prepared replies.
for i, reply := range br.Responses {
c := calls[i]
gogoproto.Merge(c.Reply, reply.GetInner())
if c.Post != nil {
if e := c.Post(); e != nil && pErr != nil {
pErr = proto.NewError(e)
}
}
}
return
}
// send runs the specified calls synchronously in a single batch and
// returns any errors. If the transaction is read-only or has already
// been successfully committed or aborted, a potential trailing
// EndTransaction call is silently dropped, allowing the caller to
// always commit or clean-up explicitly even when that may not be
// required (or even erroneous).
func (txn *Txn) send(calls ...proto.Call) *proto.Error {
if txn.Proto.Status != proto.PENDING {
return proto.NewError(util.Errorf("attempting to use %s transaction", txn.Proto.Status))
}
lastIndex := len(calls) - 1
if lastIndex < 0 {
return nil
}
lastReq := calls[lastIndex].Args
// haveTxnWrite tracks intention to write. This is in contrast to
// txn.Proto.Writing, which is set by the coordinator when the first
// intent has been created, and which lives for the life of the
// transaction.
haveTxnWrite := proto.IsTransactionWrite(lastReq)
for _, call := range calls[:lastIndex] {
request := call.Args
if req, ok := request.(*proto.EndTransactionRequest); ok {
return proto.NewError(util.Errorf("%s sent as non-terminal call", req.Method()))
}
if !haveTxnWrite {
haveTxnWrite = proto.IsTransactionWrite(request)
}
}
endTxnRequest, haveEndTxn := lastReq.(*proto.EndTransactionRequest)
needEndTxn := txn.Proto.Writing || haveTxnWrite
elideEndTxn := haveEndTxn && !needEndTxn
if elideEndTxn {
calls = calls[:lastIndex]
}
pErr := txn.db.send(calls...)
if elideEndTxn && pErr == nil {
// This normally happens on the server and sent back in response
// headers, but this transaction was optimized away. The caller may
// still inspect the transaction struct, so we manually update it
// here to emulate a true transaction.
if endTxnRequest.Commit {
txn.Proto.Status = proto.COMMITTED
} else {
txn.Proto.Status = proto.ABORTED
}
}
return pErr
}
// sendAttempt gathers and rearranges the replicas, and makes an RPC call.
func (ds *DistSender) sendAttempt(trace *tracer.Trace, ba proto.BatchRequest, desc *proto.RangeDescriptor) (*proto.BatchResponse, *proto.Error) {
defer trace.Epoch("sending RPC")()
leader := ds.leaderCache.Lookup(proto.RangeID(desc.RangeID))
// Try to send the call.
replicas := newReplicaSlice(ds.gossip, desc)
// Rearrange the replicas so that those replicas with long common
// prefix of attributes end up first. If there's no prefix, this is a
// no-op.
order := ds.optimizeReplicaOrder(replicas)
// If this request needs to go to a leader and we know who that is, move
// it to the front.
if !(proto.IsReadOnly(&ba) && ba.ReadConsistency == proto.INCONSISTENT) &&
leader.StoreID > 0 {
if i := replicas.FindReplica(leader.StoreID); i >= 0 {
replicas.MoveToFront(i)
order = rpc.OrderStable
}
}
// TODO(tschottdorf) &ba -> ba
resp, err := ds.sendRPC(trace, desc.RangeID, replicas, order, &ba)
if err != nil {
return nil, proto.NewError(err)
}
// Untangle the error from the received response.
br := resp.(*proto.BatchResponse)
pErr := br.Error
br.Error = nil // scrub the response error
return br, pErr
}
// getDescriptors looks up the range descriptor to use for a query over the
// key range [from,to), with the given lookupOptions. The range descriptor
// which contains the range in which the request should start its query is
// returned first; the returned bool is true in case the given range reaches
// outside the first descriptor.
// In case either of the descriptors is discovered stale, the returned closure
// should be called; it evicts the cache appropriately.
// Note that `from` and `to` are not necessarily Key and EndKey from a
// RequestHeader; it's assumed that they've been translated to key addresses
// already (via KeyAddress).
func (ds *DistSender) getDescriptors(from, to proto.Key, options lookupOptions) (*proto.RangeDescriptor, bool, func(), *proto.Error) {
var desc *proto.RangeDescriptor
var err error
var descKey proto.Key
if !options.useReverseScan {
descKey = from
} else {
descKey = to
}
desc, err = ds.rangeCache.LookupRangeDescriptor(descKey, options)
if err != nil {
return nil, false, nil, proto.NewError(err)
}
// Checks whether need to get next range descriptor. If so, returns true.
needAnother := func(desc *proto.RangeDescriptor, isReverse bool) bool {
if isReverse {
return from.Less(desc.StartKey)
}
return desc.EndKey.Less(to)
}
evict := func() {
ds.rangeCache.EvictCachedRangeDescriptor(descKey, desc, options.useReverseScan)
}
return desc, needAnother(desc, options.useReverseScan), evict, nil
}
// Batch sends a request to Cockroach via RPC. Errors which are retryable are
// retried with backoff in a loop using the default retry options. Other errors
// sending the request are retried indefinitely using the same client command
// ID to avoid reporting failure when in fact the command may have gone through
// and been executed successfully. We retry here to eventually get through with
// the same client command ID and be given the cached response.
func (s *rpcSender) Send(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
var err error
var br proto.BatchResponse
for r := retry.Start(s.retryOpts); r.Next(); {
select {
case <-s.client.Healthy():
default:
err = fmt.Errorf("failed to send RPC request %s: client is unhealthy", method)
log.Warning(err)
continue
}
if err = s.client.Call(method, &ba, &br); err != nil {
br.Reset() // don't trust anyone.
// Assume all errors sending request are retryable. The actual
// number of things that could go wrong is vast, but we don't
// want to miss any which should in theory be retried with the
// same client command ID. We log the error here as a warning so
// there's visiblity that this is happening. Some of the errors
// we'll sweep up in this net shouldn't be retried, but we can't
// really know for sure which.
log.Warningf("failed to send RPC request %s: %s", method, err)
continue
}
// On successful post, we're done with retry loop.
break
}
if err != nil {
return nil, proto.NewError(err)
}
pErr := br.Error
br.Error = nil
return &br, pErr
}
// Send implements the client.Sender interface. The store is looked up from the
// store map if specified by the request; otherwise, the command is being
// executed locally, and the replica is determined via lookup through each
// store's LookupRange method. The latter path is taken only by unit tests.
func (ls *LocalSender) Send(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
trace := tracer.FromCtx(ctx)
var store *storage.Store
var err error
// If we aren't given a Replica, then a little bending over
// backwards here. This case applies exclusively to unittests.
if ba.RangeID == 0 || ba.Replica.StoreID == 0 {
var repl *proto.Replica
var rangeID proto.RangeID
rangeID, repl, err = ls.lookupReplica(ba.Key, ba.EndKey)
if err == nil {
ba.RangeID = rangeID
ba.Replica = *repl
}
}
ctx = log.Add(ctx,
log.Method, ba.Method(), // TODO(tschottdorf): Method() always `Batch`.
log.Key, ba.Key,
log.RangeID, ba.RangeID)
if err == nil {
store, err = ls.GetStore(ba.Replica.StoreID)
}
var br *proto.BatchResponse
if err != nil {
return nil, proto.NewError(err)
}
// For calls that read data within a txn, we can avoid uncertainty
// related retries in certain situations. If the node is in
// "CertainNodes", we need not worry about uncertain reads any
// more. Setting MaxTimestamp=Timestamp for the operation
// accomplishes that. See proto.Transaction.CertainNodes for details.
if ba.Txn != nil && ba.Txn.CertainNodes.Contains(ba.Replica.NodeID) {
// MaxTimestamp = Timestamp corresponds to no clock uncertainty.
trace.Event("read has no clock uncertainty")
ba.Txn.MaxTimestamp = ba.Txn.Timestamp
}
// TODO(tschottdorf): &ba -> ba
tmpR, pErr := store.ExecuteCmd(ctx, &ba)
// TODO(tschottdorf): remove this dance once BatchResponse is returned.
if tmpR != nil {
br = tmpR.(*proto.BatchResponse)
if br.Error != nil {
panic(proto.ErrorUnexpectedlySet(store, br))
}
}
return br, pErr
}
// TestRunTransactionRetryOnErrors verifies that the transaction
// is retried on the correct errors.
func TestRunTransactionRetryOnErrors(t *testing.T) {
defer leaktest.AfterTest(t)
testCases := []struct {
err error
retry bool // Expect retry?
}{
{&proto.ReadWithinUncertaintyIntervalError{}, true},
{&proto.TransactionAbortedError{}, true},
{&proto.TransactionPushError{}, true},
{&proto.TransactionRetryError{}, true},
{&proto.RangeNotFoundError{}, false},
{&proto.RangeKeyMismatchError{}, false},
{&proto.TransactionStatusError{}, false},
}
for i, test := range testCases {
count := 0
db := newDB(newTestSender(func(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
if _, ok := ba.GetArg(proto.Put); ok {
count++
if count == 1 {
return nil, proto.NewError(test.err)
}
}
return &proto.BatchResponse{}, nil
}, nil))
db.txnRetryOptions.InitialBackoff = 1 * time.Millisecond
err := db.Txn(func(txn *Txn) error {
return txn.Put("a", "b")
})
if test.retry {
if count != 2 {
t.Errorf("%d: expected one retry; got %d", i, count-1)
}
if err != nil {
t.Errorf("%d: expected success on retry; got %s", i, err)
}
} else {
if count != 1 {
t.Errorf("%d: expected no retries; got %d", i, count)
}
if reflect.TypeOf(err) != reflect.TypeOf(test.err) {
t.Errorf("%d: expected error of type %T; got %T", i, test.err, err)
}
}
}
}
// sendAndFill is a helper which sends the given batch and fills its results,
// returning the appropriate error which is either from the first failing call,
// or an "internal" error.
func sendAndFill(send func(...proto.Call) *proto.Error, b *Batch) *proto.Error {
// Errors here will be attached to the results, so we will get them from
// the call to fillResults in the regular case in which an individual call
// fails. But send() also returns its own errors, so there's some dancing
// here to do because we want to run fillResults() so that the individual
// result gets initialized with an error from the corresponding call.
pErr := send(b.calls...)
if pErr != nil {
// TODO(tschottdorf): give the error to fillResults or make sure in
// some other way that fillResults knows it's only called to set the
// keys.
_ = b.fillResults()
return pErr
}
return proto.NewError(b.fillResults())
}
// TestClientCommandID verifies that client command ID is set
// on call.
func TestClientCommandID(t *testing.T) {
defer leaktest.AfterTest(t)
count := 0
db := NewDB(newTestSender(func(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
count++
if ba.CmdID.WallTime == 0 {
return nil, proto.NewError(util.Errorf("expected client command ID to be initialized"))
}
return ba.CreateReply().(*proto.BatchResponse), nil
}, nil))
if err := db.Put("a", "b"); err != nil {
t.Error(err)
}
if count != 1 {
t.Errorf("expected test sender to be invoked once; got %d", count)
}
}
// TestAbortTransactionOnCommitErrors verifies that non-exec transactions are
// aborted on the correct errors.
func TestAbortTransactionOnCommitErrors(t *testing.T) {
defer leaktest.AfterTest(t)
testCases := []struct {
err error
abort bool
}{
{&proto.ReadWithinUncertaintyIntervalError{}, true},
{&proto.TransactionAbortedError{}, false},
{&proto.TransactionPushError{}, true},
{&proto.TransactionRetryError{}, true},
{&proto.RangeNotFoundError{}, true},
{&proto.RangeKeyMismatchError{}, true},
{&proto.TransactionStatusError{}, true},
}
for _, test := range testCases {
var commit, abort bool
db := NewDB(newTestSender(func(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
switch t := ba.Requests[0].GetInner().(type) {
case *proto.EndTransactionRequest:
if t.Commit {
commit = true
return nil, proto.NewError(test.err)
}
abort = true
}
return &proto.BatchResponse{}, nil
}, nil))
txn := NewTxn(*db)
_ = txn.Put("a", "b")
_ = txn.Commit()
if !commit {
t.Errorf("%T: failed to find commit", test.err)
}
if test.abort && !abort {
t.Errorf("%T: failed to find abort", test.err)
} else if !test.abort && abort {
t.Errorf("%T: found unexpected abort", test.err)
}
}
}
// TestTxnResetTxnOnAbort verifies transaction is reset on abort.
func TestTxnResetTxnOnAbort(t *testing.T) {
defer leaktest.AfterTest(t)
db := newDB(newTestSender(func(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
return nil, proto.NewError(&proto.TransactionAbortedError{
Txn: *gogoproto.Clone(ba.Txn).(*proto.Transaction),
})
}, nil))
txn := NewTxn(*db)
_, pErr := txn.db.sender.Send(context.Background(), testPut())
if _, ok := pErr.GoError().(*proto.TransactionAbortedError); !ok {
t.Fatalf("expected TransactionAbortedError, got %v", pErr)
}
if len(txn.Proto.ID) != 0 {
t.Errorf("expected txn to be cleared")
}
}
// TestTxnRequestTxnTimestamp verifies response txn timestamp is
// always upgraded on successive requests.
func TestTxnRequestTxnTimestamp(t *testing.T) {
defer leaktest.AfterTest(t)
makeTS := func(walltime int64, logical int32) proto.Timestamp {
return proto.ZeroTimestamp.Add(walltime, logical)
}
testPutReq := gogoproto.Clone(testPutReq).(*proto.PutRequest)
testCases := []struct {
expRequestTS, responseTS proto.Timestamp
}{
{makeTS(0, 0), makeTS(10, 0)},
{makeTS(10, 0), makeTS(10, 1)},
{makeTS(10, 1), makeTS(10, 0)},
{makeTS(10, 1), makeTS(20, 1)},
{makeTS(20, 1), makeTS(20, 1)},
{makeTS(20, 1), makeTS(0, 0)},
{makeTS(20, 1), makeTS(20, 1)},
}
var testIdx int
db := NewDB(newTestSender(nil, func(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
test := testCases[testIdx]
if !test.expRequestTS.Equal(ba.Txn.Timestamp) {
return nil, proto.NewError(util.Errorf("%d: expected ts %s got %s", testIdx, test.expRequestTS, ba.Txn.Timestamp))
}
br := &proto.BatchResponse{}
br.Txn = &proto.Transaction{}
br.Txn.Update(ba.Txn) // copy
br.Txn.Timestamp = test.responseTS
return br, nil
}))
txn := NewTxn(*db)
for testIdx = range testCases {
if _, err := send(txn.db.sender, testPutReq); err != nil {
t.Fatal(err)
}
}
}
// TODO(tschottdorf): this method is somewhat awkward but unless we want to
// give this error back to the client, our options are limited. We'll have to
// run the whole thing for them, or any restart will still end up at the client
// which will not be prepared to be handed a Txn.
func (tc *TxnCoordSender) resendWithTxn(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
// Run a one-off transaction with that single command.
if log.V(1) {
log.Infof("%s: auto-wrapping in txn and re-executing: ", ba)
}
tmpDB := client.NewDBWithPriority(tc, ba.GetUserPriority())
br := &proto.BatchResponse{}
if err := tmpDB.Txn(func(txn *client.Txn) error {
txn.SetDebugName("auto-wrap", 0)
b := &client.Batch{}
for _, arg := range ba.Requests {
req := arg.GetInner()
call := proto.Call{Args: req, Reply: req.CreateReply()}
b.InternalAddCall(call)
br.Add(call.Reply)
}
return txn.CommitInBatch(b)
}); err != nil {
return nil, proto.NewError(err)
}
return br, nil
}
// TODO(tschottdorf): this method is somewhat awkward but unless we want to
// give this error back to the client, our options are limited. We'll have to
// run the whole thing for them, or any restart will still end up at the client
// which will not be prepared to be handed a Txn.
func (tc *TxnCoordSender) resendWithTxn(ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
// Run a one-off transaction with that single command.
if log.V(1) {
log.Infof("%s: auto-wrapping in txn and re-executing: ", ba)
}
tmpDB := client.NewDBWithPriority(tc, ba.GetUserPriority())
var br *proto.BatchResponse
err := tmpDB.Txn(func(txn *client.Txn) error {
txn.SetDebugName("auto-wrap", 0)
b := &client.Batch{}
for _, arg := range ba.Requests {
req := arg.GetInner()
b.InternalAddRequest(req)
}
var err error
br, err = txn.CommitInBatchWithResponse(b)
return err
})
if err != nil {
return nil, proto.NewError(err)
}
br.Txn = nil // hide the evidence
return br, nil
}
func TestNodeEventFeed(t *testing.T) {
defer leaktest.AfterTest(t)
nodeDesc := proto.NodeDescriptor{
NodeID: proto.NodeID(99),
}
// A testCase corresponds to a single Store event type. Each case contains a
// method which publishes a single event to the given storeEventPublisher,
// and an expected result interface which should match the produced
// event.
testCases := []struct {
publishTo func(status.NodeEventFeed)
expected interface{}
}{
{
publishTo: func(nef status.NodeEventFeed) {
nef.StartNode(nodeDesc, 100)
},
expected: &status.StartNodeEvent{
Desc: nodeDesc,
StartedAt: 100,
},
},
{
publishTo: func(nef status.NodeEventFeed) {
nef.CallComplete(wrap(proto.NewGet(proto.Key("abc"))), nil)
},
expected: &status.CallSuccessEvent{
NodeID: proto.NodeID(1),
Method: proto.Get,
},
},
{
publishTo: func(nef status.NodeEventFeed) {
nef.CallComplete(wrap(proto.NewPut(proto.Key("abc"), proto.Value{Bytes: []byte("def")})), nil)
},
expected: &status.CallSuccessEvent{
NodeID: proto.NodeID(1),
Method: proto.Put,
},
},
{
publishTo: func(nef status.NodeEventFeed) {
nef.CallComplete(wrap(proto.NewGet(proto.Key("abc"))), proto.NewError(util.Errorf("error")))
},
expected: &status.CallErrorEvent{
NodeID: proto.NodeID(1),
Method: proto.Batch,
},
},
{
publishTo: func(nef status.NodeEventFeed) {
nef.CallComplete(wrap(proto.NewGet(proto.Key("abc"))), &proto.Error{
Index: &proto.ErrPosition{Index: 0},
Message: "boo",
})
},
expected: &status.CallErrorEvent{
NodeID: proto.NodeID(1),
Method: proto.Get,
},
},
}
// Compile expected events into a single slice.
expectedEvents := make([]interface{}, len(testCases))
for i := range testCases {
expectedEvents[i] = testCases[i].expected
}
events := make([]interface{}, 0, len(expectedEvents))
// Run test cases directly through a feed.
stopper := stop.NewStopper()
defer stopper.Stop()
feed := util.NewFeed(stopper)
feed.Subscribe(func(event interface{}) {
events = append(events, event)
})
nodefeed := status.NewNodeEventFeed(proto.NodeID(1), feed)
for _, tc := range testCases {
tc.publishTo(nodefeed)
}
feed.Flush()
if a, e := events, expectedEvents; !reflect.DeepEqual(a, e) {
t.Errorf("received incorrect events.\nexpected: %v\nactual: %v", e, a)
}
}
// Run executes the operations queued up within a batch. Before executing any
// of the operations the batch is first checked to see if there were any errors
// during its construction (e.g. failure to marshal a proto message).
//
// The operations within a batch are run in parallel and the order is
// non-deterministic. It is an unspecified behavior to modify and retrieve the
// same key within a batch.
//
// Upon completion, Batch.Results will contain the results for each
// operation. The order of the results matches the order the operations were
// added to the batch.
func (db *DB) Run(b *Batch) *proto.Error {
if err := b.prepare(); err != nil {
return proto.NewError(err)
}
return sendAndFill(db.send, b)
}
// updateState updates the transaction state in both the success and
// error cases, applying those updates to the corresponding txnMeta
// object when adequate. It also updates certain errors with the
// updated transaction for use by client restarts.
func (tc *TxnCoordSender) updateState(ctx context.Context, ba proto.BatchRequest, br *proto.BatchResponse, pErr *proto.Error) *proto.Error {
trace := tracer.FromCtx(ctx)
newTxn := &proto.Transaction{}
newTxn.Update(ba.GetTxn())
err := pErr.GoError()
switch t := err.(type) {
case nil:
newTxn.Update(br.GetTxn())
// Move txn timestamp forward to response timestamp if applicable.
// TODO(tschottdorf): see (*Replica).executeBatch and comments within.
// Looks like this isn't necessary any more, nor did it prevent a bug
// referenced in a TODO there.
newTxn.Timestamp.Forward(br.Timestamp)
case *proto.TransactionStatusError:
// Likely already committed or more obscure errors such as epoch or
// timestamp regressions; consider txn dead.
defer tc.cleanupTxn(trace, t.Txn)
case *proto.OpRequiresTxnError:
// TODO(tschottdorf): range-spanning autowrap currently broken.
panic("TODO(tschottdorf): disabled")
case *proto.ReadWithinUncertaintyIntervalError:
// Mark the host as certain. See the protobuf comment for
// Transaction.CertainNodes for details.
if t.NodeID == 0 {
panic("no replica set in header on uncertainty restart")
}
newTxn.CertainNodes.Add(t.NodeID)
// If the reader encountered a newer write within the uncertainty
// interval, move the timestamp forward, just past that write or
// up to MaxTimestamp, whichever comes first.
candidateTS := newTxn.MaxTimestamp
candidateTS.Backward(t.ExistingTimestamp.Add(0, 1))
newTxn.Timestamp.Forward(candidateTS)
newTxn.Restart(ba.GetUserPriority(), newTxn.Priority, newTxn.Timestamp)
t.Txn = *newTxn
case *proto.TransactionAbortedError:
// Increase timestamp if applicable.
newTxn.Timestamp.Forward(t.Txn.Timestamp)
newTxn.Priority = t.Txn.Priority
t.Txn = *newTxn
// Clean up the freshly aborted transaction in defer(), avoiding a
// race with the state update below.
defer tc.cleanupTxn(trace, t.Txn)
case *proto.TransactionPushError:
// Increase timestamp if applicable, ensuring that we're
// just ahead of the pushee.
newTxn.Timestamp.Forward(t.PusheeTxn.Timestamp.Add(0, 1))
newTxn.Restart(ba.GetUserPriority(), t.PusheeTxn.Priority-1, newTxn.Timestamp)
t.Txn = newTxn
case *proto.TransactionRetryError:
// Increase timestamp if applicable.
newTxn.Timestamp.Forward(t.Txn.Timestamp)
newTxn.Restart(ba.GetUserPriority(), t.Txn.Priority, newTxn.Timestamp)
t.Txn = *newTxn
case proto.TransactionRestartError:
// Assertion: The above cases should exhaust all ErrorDetails which
// carry a Transaction.
if pErr.Detail != nil {
panic(fmt.Sprintf("unhandled TransactionRestartError %T", err))
}
}
return func() *proto.Error {
if len(newTxn.ID) <= 0 {
return pErr
}
id := string(newTxn.ID)
tc.Lock()
defer tc.Unlock()
txnMeta := tc.txns[id]
// For successful transactional requests, keep the written intents and
// the updated transaction record to be sent along with the reply.
// The transaction metadata is created with the first writing operation
// TODO(tschottdorf): already computed the intents prior to sending,
// consider re-using those.
if intents := ba.GetIntents(); len(intents) > 0 && err == nil {
if txnMeta == nil {
newTxn.Writing = true
txnMeta = &txnMetadata{
txn: *newTxn,
keys: cache.NewIntervalCache(cache.Config{Policy: cache.CacheNone}),
firstUpdateNanos: tc.clock.PhysicalNow(),
lastUpdateNanos: tc.clock.PhysicalNow(),
timeoutDuration: tc.clientTimeout,
txnEnd: make(chan struct{}),
}
tc.txns[id] = txnMeta
// If the transaction is already over, there's no point in
// launching a one-off coordinator which will shut down right
// away.
if _, isEnding := ba.GetArg(proto.EndTransaction); !isEnding {
trace.Event("coordinator spawns")
if !tc.stopper.RunAsyncTask(func() {
tc.heartbeatLoop(id)
}) {
// The system is already draining and we can't start the
// heartbeat. We refuse new transactions for now because
// they're likely not going to have all intents committed.
// In principle, we can relax this as needed though.
tc.unregisterTxnLocked(id)
return proto.NewError(&proto.NodeUnavailableError{})
}
}
}
for _, intent := range intents {
txnMeta.addKeyRange(intent.Key, intent.EndKey)
}
}
// Update our record of this transaction, even on error.
if txnMeta != nil {
txnMeta.txn.Update(newTxn) // better to replace after #2300
if !txnMeta.txn.Writing {
panic("tracking a non-writing txn")
}
txnMeta.setLastUpdate(tc.clock.PhysicalNow())
}
if err == nil {
// For successful transactional requests, always send the updated txn
// record back.
if br.Txn == nil {
br.Txn = &proto.Transaction{}
}
*br.Txn = *newTxn
}
return pErr
}()
}
// Send implements the batch.Sender interface. If the request is part of a
// transaction, the TxnCoordSender adds the transaction to a map of active
// transactions and begins heartbeating it. Every subsequent request for the
// same transaction updates the lastUpdate timestamp to prevent live
// transactions from being considered abandoned and garbage collected.
// Read/write mutating requests have their key or key range added to the
// transaction's interval tree of key ranges for eventual cleanup via resolved
// write intents; they're tagged to an outgoing EndTransaction request, with
// the receiving replica in charge of resolving them.
func (tc *TxnCoordSender) Send(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
tc.maybeBeginTxn(&ba)
ba.CmdID = ba.GetOrCreateCmdID(tc.clock.PhysicalNow())
var startNS int64
// This is the earliest point at which the request has a ClientCmdID and/or
// TxnID (if applicable). Begin a Trace which follows this request.
trace := tc.tracer.NewTrace(&ba)
defer trace.Finalize()
// TODO(tschottdorf): always "Batch"
defer trace.Epoch(fmt.Sprintf("sending %s", ba.Method()))()
ctx = tracer.ToCtx(ctx, trace)
// TODO(tschottdorf): No looping through the batch will be necessary once
// we've eliminated all the redundancies.
for _, arg := range ba.Requests {
trace.Event(fmt.Sprintf("%T", arg.GetValue()))
if err := updateForBatch(arg.GetInner(), ba.RequestHeader); err != nil {
return nil, proto.NewError(err)
}
}
var id string // optional transaction ID
if ba.Txn != nil {
// If this request is part of a transaction...
id = string(ba.Txn.ID)
// Verify that if this Transaction is not read-only, we have it on
// file. If not, refuse writes - the client must have issued a write on
// another coordinator previously.
if ba.Txn.Writing && ba.IsTransactionWrite() {
tc.Lock()
_, ok := tc.txns[id]
tc.Unlock()
if !ok {
return nil, proto.NewError(util.Errorf("transaction must not write on multiple coordinators"))
}
}
// Set the timestamp to the original timestamp for read-only
// commands and to the transaction timestamp for read/write
// commands.
if ba.IsReadOnly() {
ba.Timestamp = ba.Txn.OrigTimestamp
} else {
ba.Timestamp = ba.Txn.Timestamp
}
if rArgs, ok := ba.GetArg(proto.EndTransaction); ok {
et := rArgs.(*proto.EndTransactionRequest)
// Remember when EndTransaction started in case we want to
// be linearizable.
startNS = tc.clock.PhysicalNow()
if len(et.Intents) > 0 {
// TODO(tschottdorf): it may be useful to allow this later.
// That would be part of a possible plan to allow txns which
// write on multiple coordinators.
return nil, proto.NewError(util.Errorf("client must not pass intents to EndTransaction"))
}
if len(et.Key) != 0 {
return nil, proto.NewError(util.Errorf("EndTransaction must not have a Key set"))
}
et.Key = ba.Txn.Key
tc.Lock()
txnMeta, metaOK := tc.txns[id]
if id != "" && metaOK {
et.Intents = txnMeta.intents()
}
tc.Unlock()
if intents := ba.GetIntents(); len(intents) > 0 {
// Writes in Batch, so EndTransaction is fine. Should add
// outstanding intents to EndTransaction, though.
// TODO(tschottdorf): possible issues when the batch fails,
// but the intents have been added anyways.
// TODO(tschottdorf): some of these intents may be covered
// by others, for example {[a,b), a}). This can lead to
// some extra requests when those are non-local to the txn
// record. But it doesn't seem worth optimizing now.
et.Intents = append(et.Intents, intents...)
} else if !metaOK {
// If we don't have the transaction, then this must be a retry
// by the client. We can no longer reconstruct a correct
// request so we must fail.
//
// TODO(bdarnell): if we had a GetTransactionStatus API then
// we could lookup the transaction and return either nil or
// TransactionAbortedError instead of this ambivalent error.
return nil, proto.NewError(util.Errorf("transaction is already committed or aborted"))
}
if len(et.Intents) == 0 {
// If there aren't any intents, then there's factually no
// transaction to end. Read-only txns have all of their state in
// the client.
return nil, proto.NewError(util.Errorf("cannot commit a read-only transaction"))
}
// TODO(tschottdorf): V(1)
for _, intent := range et.Intents {
trace.Event(fmt.Sprintf("intent: [%s,%s)", intent.Key, intent.EndKey))
}
}
}
// Send the command through wrapped sender, taking appropriate measures
// on error.
var br *proto.BatchResponse
{
var pErr *proto.Error
br, pErr = tc.wrapped.Send(ctx, ba)
if _, ok := pErr.GoError().(*proto.OpRequiresTxnError); ok {
br, pErr = tc.resendWithTxn(ba)
}
if pErr := tc.updateState(ctx, ba, br, pErr); pErr != nil {
return nil, pErr
}
}
if br.Txn == nil {
return br, nil
}
if _, ok := ba.GetArg(proto.EndTransaction); !ok {
return br, nil
}
// If the --linearizable flag is set, we want to make sure that
// all the clocks in the system are past the commit timestamp
// of the transaction. This is guaranteed if either
// - the commit timestamp is MaxOffset behind startNS
// - MaxOffset ns were spent in this function
// when returning to the client. Below we choose the option
// that involves less waiting, which is likely the first one
// unless a transaction commits with an odd timestamp.
if tsNS := br.Txn.Timestamp.WallTime; startNS > tsNS {
startNS = tsNS
}
sleepNS := tc.clock.MaxOffset() -
time.Duration(tc.clock.PhysicalNow()-startNS)
if tc.linearizable && sleepNS > 0 {
defer func() {
if log.V(1) {
log.Infof("%v: waiting %s on EndTransaction for linearizability", br.Txn.Short(), util.TruncateDuration(sleepNS, time.Millisecond))
}
time.Sleep(sleepNS)
}()
}
if br.Txn.Status != proto.PENDING {
tc.cleanupTxn(trace, *br.Txn)
}
return br, nil
}
// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc).
func (ds *DistSender) sendChunk(ctx context.Context, ba proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
// TODO(tschottdorf): prepare for removing Key and EndKey from BatchRequest,
// making sure that anything that relies on them goes bust.
ba.Key, ba.EndKey = nil, nil
isReverse := ba.IsReverse()
trace := tracer.FromCtx(ctx)
// The minimal key range encompassing all requests contained within.
// Local addressing has already been resolved.
// TODO(tschottdorf): consider rudimentary validation of the batch here
// (for example, non-range requests with EndKey, or empty key ranges).
from, to := keys.Range(ba)
var br *proto.BatchResponse
// Send the request to one range per iteration.
for {
options := lookupOptions{
useReverseScan: isReverse,
}
var curReply *proto.BatchResponse
var desc *proto.RangeDescriptor
var needAnother bool
var pErr *proto.Error
for r := retry.Start(ds.rpcRetryOptions); r.Next(); {
// Get range descriptor (or, when spanning range, descriptors). Our
// error handling below may clear them on certain errors, so we
// refresh (likely from the cache) on every retry.
descDone := trace.Epoch("meta descriptor lookup")
var evictDesc func()
desc, needAnother, evictDesc, pErr = ds.getDescriptors(from, to, options)
descDone()
// getDescriptors may fail retryably if the first range isn't
// available via Gossip.
if pErr != nil {
if pErr.Retryable {
if log.V(1) {
log.Warning(pErr)
}
continue
}
break
}
// If there's no transaction and op spans ranges, possibly
// re-run as part of a transaction for consistency. The
// case where we don't need to re-run is if the read
// consistency is not required.
if needAnother && ba.Txn == nil && ba.IsRange() &&
ba.ReadConsistency != proto.INCONSISTENT {
return nil, proto.NewError(&proto.OpRequiresTxnError{})
}
// It's possible that the returned descriptor misses parts of the
// keys it's supposed to scan after it's truncated to match the
// descriptor. Example revscan [a,g), first desc lookup for "g"
// returns descriptor [c,d) -> [d,g) is never scanned.
// We evict and retry in such a case.
if (isReverse && !desc.ContainsKeyRange(desc.StartKey, to)) || (!isReverse && !desc.ContainsKeyRange(from, desc.EndKey)) {
evictDesc()
continue
}
curReply, pErr = func() (*proto.BatchResponse, *proto.Error) {
// Truncate the request to our current key range.
untruncate, numActive, trErr := truncate(&ba, desc, from, to)
if numActive == 0 && trErr == nil {
untruncate()
// This shouldn't happen in the wild, but some tests
// exercise it.
return nil, proto.NewError(util.Errorf("truncation resulted in empty batch on [%s,%s): %s",
from, to, ba))
}
defer untruncate()
if trErr != nil {
return nil, proto.NewError(trErr)
}
// TODO(tschottdorf): make key range on batch redundant. The
// requests within dictate it anyways.
ba.Key, ba.EndKey = keys.Range(ba)
reply, err := ds.sendAttempt(trace, ba, desc)
ba.Key, ba.EndKey = nil, nil
if err != nil {
if log.V(1) {
log.Warningf("failed to invoke %s: %s", ba, pErr)
}
}
return reply, err
}()
// If sending succeeded, break this loop.
if pErr == nil {
break
}
// Error handling below.
// If retryable, allow retry. For range not found or range
// key mismatch errors, we don't backoff on the retry,
// but reset the backoff loop so we can retry immediately.
switch tErr := pErr.GoError().(type) {
case *proto.SendError:
// For an RPC error to occur, we must've been unable to contact
// any replicas. In this case, likely all nodes are down (or
// not getting back to us within a reasonable amount of time).
// We may simply not be trying to talk to the up-to-date
// replicas, so clearing the descriptor here should be a good
// idea.
// TODO(tschottdorf): If a replica group goes dead, this
// will cause clients to put high read pressure on the first
// range, so there should be some rate limiting here.
evictDesc()
if tErr.CanRetry() {
continue
}
case *proto.RangeNotFoundError, *proto.RangeKeyMismatchError:
trace.Event(fmt.Sprintf("reply error: %T", tErr))
// Range descriptor might be out of date - evict it.
evictDesc()
// On addressing errors, don't backoff; retry immediately.
r.Reset()
if log.V(1) {
log.Warning(tErr)
}
// On retries, allow [uncommitted] intents on range descriptor
// lookups to be returned 50% of the time in order to succeed
// at finding the transaction record pointed to by the intent
// itself. The 50% probability of returning either the current
// intent or the previously committed value balances between
// the two cases where the intent's txn hasn't yet been
// committed (the previous value is correct), or the intent's
// txn has been committed (the intent value is correct).
options.considerIntents = true
continue
case *proto.NotLeaderError:
trace.Event(fmt.Sprintf("reply error: %T", tErr))
newLeader := tErr.GetLeader()
// Verify that leader is a known replica according to the
// descriptor. If not, we've got a stale replica; evict cache.
// Next, cache the new leader.
if newLeader != nil {
if i, _ := desc.FindReplica(newLeader.StoreID); i == -1 {
if log.V(1) {
log.Infof("error indicates unknown leader %s, expunging descriptor %s", newLeader, desc)
}
evictDesc()
}
} else {
newLeader = &proto.Replica{}
}
ds.updateLeaderCache(proto.RangeID(desc.RangeID), *newLeader)
if log.V(1) {
log.Warning(tErr)
}
r.Reset()
continue
case retry.Retryable:
if tErr.CanRetry() {
if log.V(1) {
log.Warning(tErr)
}
trace.Event(fmt.Sprintf("reply error: %T", tErr))
continue
}
}
break
}
// Immediately return if querying a range failed non-retryably.
if pErr != nil {
return nil, pErr
}
first := br == nil
if first {
// First response from a Range.
br = curReply
} else {
// This was the second or later call in a cross-Range request.
// Combine the new response with the existing one.
if err := br.Combine(curReply); err != nil {
// TODO(tschottdorf): return nil, proto.NewError(err)
panic(err)
}
}
// If this request has a bound (such as MaxResults in
// ScanRequest) and we are going to query at least one more range,
// check whether enough rows have been retrieved.
// TODO(tschottdorf): need tests for executing a multi-range batch
// with various bounded requests which saturate at different times.
if needAnother {
// Start with the assumption that all requests are saturated.
// Below, we look at each and decide whether that's true.
// Everything that is indeed saturated is "masked out" from the
// batch request; only if that's all requests does needAnother
// remain false.
needAnother = false
if first {
// Clone ba.Requests. This is because we're multi-range, and
// some requests may be bounded, which could lead to them being
// masked out once they're saturated. We don't want to risk
// removing requests that way in the "master copy" since that
// could lead to omitting requests in certain retry scenarios.
ba.Requests = append([]proto.RequestUnion(nil), ba.Requests...)
}
for i, union := range ba.Requests {
args := union.GetInner()
if _, ok := args.(*proto.NoopRequest); ok {
// NoopRequests are skipped.
continue
}
boundedArg, ok := args.(proto.Bounded)
if !ok {
// Non-bounded request. We will have to query all ranges.
needAnother = true
continue
}
prevBound := boundedArg.GetBound()
cReply, ok := curReply.Responses[i].GetInner().(proto.Countable)
if !ok || prevBound <= 0 {
// Request bounded, but without max results. Again, will
// need to query everything we can. The case in which the reply
// isn't countable occurs when the request wasn't active for
// that range (since it didn't apply to it), so the response
// is a NoopResponse.
needAnother = true
continue
}
nextBound := prevBound - cReply.Count()
if nextBound <= 0 {
// We've hit max results for this piece of the batch. Mask
// it out (we've copied the requests slice above, so this
// is kosher).
ba.Requests[i].Reset() // necessary (no one-of?)
if !ba.Requests[i].SetValue(&proto.NoopRequest{}) {
panic("RequestUnion excludes NoopRequest")
}
continue
}
// The request isn't saturated yet.
needAnother = true
boundedArg.SetBound(nextBound)
}
}
// If this was the last range accessed by this call, exit loop.
if !needAnother {
return br, nil
}
if isReverse {
// In next iteration, query previous range.
// We use the StartKey of the current descriptor as opposed to the
// EndKey of the previous one since that doesn't have bugs when
// stale descriptors come into play.
to = prev(ba, desc.StartKey)
} else {
// In next iteration, query next range.
// It's important that we use the EndKey of the current descriptor
// as opposed to the StartKey of the next one: if the former is stale,
// it's possible that the next range has since merged the subsequent
// one, and unless both descriptors are stale, the next descriptor's
// StartKey would move us to the beginning of the current range,
// resulting in a duplicate scan.
from = next(ba, desc.EndKey)
}
trace.Event("querying next range")
}
}
// TestTxnCoordSenderTxnUpdatedOnError verifies that errors adjust the
// response transaction's timestamp and priority as appropriate.
func TestTxnCoordSenderTxnUpdatedOnError(t *testing.T) {
defer leaktest.AfterTest(t)
t.Skip("TODO(tschottdorf): fix up and re-enable. It depends on each logical clock tick, so not fun.")
manual := hlc.NewManualClock(0)
clock := hlc.NewClock(manual.UnixNano)
clock.SetMaxOffset(20)
testCases := []struct {
err error
expEpoch int32
expPri int32
expTS proto.Timestamp
expOrigTS proto.Timestamp
nodeSeen bool
}{
{nil, 0, 1, makeTS(0, 1), makeTS(0, 1), false},
{&proto.ReadWithinUncertaintyIntervalError{
ExistingTimestamp: makeTS(10, 10)}, 1, 1, makeTS(10, 11),
makeTS(10, 11), true},
{&proto.TransactionAbortedError{Txn: proto.Transaction{
Timestamp: makeTS(20, 10), Priority: 10}}, 0, 10, makeTS(20, 10),
makeTS(0, 1), false},
{&proto.TransactionPushError{PusheeTxn: proto.Transaction{
Timestamp: makeTS(10, 10), Priority: int32(10)}}, 1, 9,
makeTS(10, 11), makeTS(10, 11), false},
{&proto.TransactionRetryError{Txn: proto.Transaction{
Timestamp: makeTS(10, 10), Priority: int32(10)}}, 1, 10,
makeTS(10, 10), makeTS(10, 10), false},
}
var testPutReq = &proto.PutRequest{
RequestHeader: proto.RequestHeader{
Key: proto.Key("test-key"),
UserPriority: gogoproto.Int32(-1),
Txn: &proto.Transaction{
Name: "test txn",
},
Replica: proto.Replica{
NodeID: 12345,
},
},
}
for i, test := range testCases {
stopper := stop.NewStopper()
ts := NewTxnCoordSender(senderFn(func(_ context.Context, _ proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
return nil, proto.NewError(test.err)
}), clock, false, nil, stopper)
var reply *proto.PutResponse
if r, err := batchutil.SendWrapped(ts, gogoproto.Clone(testPutReq).(proto.Request)); err != nil {
t.Fatal(err)
} else {
reply = r.(*proto.PutResponse)
}
teardownHeartbeats(ts)
stopper.Stop()
if reflect.TypeOf(test.err) != reflect.TypeOf(reply.GoError()) {
t.Fatalf("%d: expected %T; got %T: %v", i, test.err, reply.GoError(), reply.GoError())
}
if reply.Txn.Epoch != test.expEpoch {
t.Errorf("%d: expected epoch = %d; got %d",
i, test.expEpoch, reply.Txn.Epoch)
}
if reply.Txn.Priority != test.expPri {
t.Errorf("%d: expected priority = %d; got %d",
i, test.expPri, reply.Txn.Priority)
}
if !reply.Txn.Timestamp.Equal(test.expTS) {
t.Errorf("%d: expected timestamp to be %s; got %s",
i, test.expTS, reply.Txn.Timestamp)
}
if !reply.Txn.OrigTimestamp.Equal(test.expOrigTS) {
t.Errorf("%d: expected orig timestamp to be %s + 1; got %s",
i, test.expOrigTS, reply.Txn.OrigTimestamp)
}
if nodes := reply.Txn.CertainNodes.Nodes; (len(nodes) != 0) != test.nodeSeen {
t.Errorf("%d: expected nodeSeen=%t, but list of hosts is %v",
i, test.nodeSeen, nodes)
}
}
}
// TestTxnCoordSenderBatchTransaction tests that it is possible to send
// one-off transactional calls within a batch under certain circumstances.
func TestTxnCoordSenderBatchTransaction(t *testing.T) {
defer leaktest.AfterTest(t)
t.Skip("TODO(tschottdorf): remove this test; behavior is more transparent now")
defer leaktest.AfterTest(t)
stopper := stop.NewStopper()
defer stopper.Stop()
clock := hlc.NewClock(hlc.UnixNano)
var called bool
var alwaysError = errors.New("success")
ts := NewTxnCoordSender(senderFn(func(_ context.Context, _ proto.BatchRequest) (*proto.BatchResponse, *proto.Error) {
called = true
// Returning this error is an easy way of preventing heartbeats
// to be started for otherwise "successful" calls.
return nil, proto.NewError(alwaysError)
}), clock, false, nil, stopper)
pushArg := &proto.PushTxnRequest{}
putArg := &proto.PutRequest{}
getArg := &proto.GetRequest{}
testCases := []struct {
req proto.Request
batch, arg, ok bool
}{
// Lays intents: can't have this on individual calls at all.
{putArg, false, false, true},
{putArg, true, false, true},
{putArg, true, true, false},
{putArg, false, true, false},
// No intents: all ok, except when batch and arg have different txns.
{pushArg, false, false, true},
{pushArg, true, false, true},
{pushArg, true, true, false},
{pushArg, false, true, true},
{getArg, false, false, true},
{getArg, true, false, true},
{getArg, true, true, false},
{getArg, false, true, true},
}
txn1 := &proto.Transaction{ID: []byte("txn1")}
txn2 := &proto.Transaction{ID: []byte("txn2")}
for i, tc := range testCases {
called = false
tc.req.Reset()
ba := &proto.BatchRequest{}
if tc.arg {
tc.req.Header().Txn = txn1
}
ba.Add(tc.req)
if tc.batch {
ba.Txn = txn2
}
called = false
_, err := batchutil.SendWrapped(ts, ba)
if !tc.ok && err == alwaysError {
t.Fatalf("%d: expected error%s", i, err)
} else if tc.ok != called {
t.Fatalf("%d: wanted call: %t, got call: %t", i, tc.ok, called)
}
}
}
