Beispiel #1
0
// lookupReplica looks up replica by key [range]. Lookups are done
// by consulting each store in turn via Store.LookupRange(key).
// Returns RangeID and replica on success; RangeKeyMismatch error
// if not found.
// This is only for testing usage; performance doesn't matter.
func (ls *LocalSender) lookupReplica(start, end roachpb.RKey) (rangeID roachpb.RangeID, replica *roachpb.ReplicaDescriptor, err error) {
	ls.mu.RLock()
	defer ls.mu.RUnlock()
	var rng *storage.Replica
	for _, store := range ls.storeMap {
		rng = store.LookupReplica(start, end)
		if rng == nil {
			if tmpRng := store.LookupReplica(start, nil); tmpRng != nil {
				log.Warningf(fmt.Sprintf("range not contained in one range: [%s,%s), but have [%s,%s)", start, end, tmpRng.Desc().StartKey, tmpRng.Desc().EndKey))
			}
			continue
		}
		if replica == nil {
			rangeID = rng.Desc().RangeID
			replica = rng.GetReplica()
			continue
		}
		// Should never happen outside of tests.
		return 0, nil, util.Errorf(
			"range %+v exists on additional store: %+v", rng, store)
	}
	if replica == nil {
		err = roachpb.NewRangeKeyMismatchError(start.AsRawKey(), end.AsRawKey(), nil)
	}
	return rangeID, replica, err
}
// TestStoreZoneUpdateAndRangeSplit verifies that modifying the zone
// configuration changes range max bytes and Range.maybeSplit() takes
// max bytes into account when deciding whether to enqueue a range for
// splitting. It further verifies that the range is in fact split on
// exceeding zone's RangeMaxBytes.
func TestStoreZoneUpdateAndRangeSplit(t *testing.T) {
	defer leaktest.AfterTest(t)()
	store, stopper, _ := createTestStore(t)
	config.TestingSetupZoneConfigHook(stopper)
	defer stopper.Stop()

	maxBytes := int64(1 << 16)
	// Set max bytes.
	descID := uint32(keys.MaxReservedDescID + 1)
	config.TestingSetZoneConfig(descID, &config.ZoneConfig{RangeMaxBytes: maxBytes})

	// Trigger gossip callback.
	if err := store.Gossip().AddInfoProto(gossip.KeySystemConfig, &config.SystemConfig{}, 0); err != nil {
		t.Fatal(err)
	}

	tableBoundary := keys.MakeTablePrefix(descID)

	{
		var rng *storage.Replica

		// Wait for the range to be split along table boundaries.
		expectedRSpan := roachpb.RSpan{Key: roachpb.RKey(tableBoundary), EndKey: roachpb.RKeyMax}
		util.SucceedsSoon(t, func() error {
			rng = store.LookupReplica(tableBoundary, nil)
			if actualRSpan := rng.Desc().RSpan(); !actualRSpan.Equal(expectedRSpan) {
				return util.Errorf("expected range %s to span %s", rng, expectedRSpan)
			}
			return nil
		})

		// Check range's max bytes settings.
		if actualMaxBytes := rng.GetMaxBytes(); actualMaxBytes != maxBytes {
			t.Fatalf("range %s max bytes mismatch, got: %d, expected: %d", rng, actualMaxBytes, maxBytes)
		}

		// Look in the range after prefix we're writing to.
		fillRange(store, rng.RangeID, tableBoundary, maxBytes, t)
	}

	// Verify that the range is in fact split.
	util.SucceedsSoon(t, func() error {
		rng := store.LookupReplica(keys.MakeTablePrefix(descID+1), nil)
		rngDesc := rng.Desc()
		rngStart, rngEnd := rngDesc.StartKey, rngDesc.EndKey
		if rngStart.Equal(tableBoundary) || !rngEnd.Equal(roachpb.RKeyMax) {
			return util.Errorf("range %s has not yet split", rng)
		}
		return nil
	})
}
Beispiel #3
0
// TestStoreZoneUpdateAndRangeSplit verifies that modifying the zone
// configuration changes range max bytes and Range.maybeSplit() takes
// max bytes into account when deciding whether to enqueue a range for
// splitting. It further verifies that the range is in fact split on
// exceeding zone's RangeMaxBytes.
func TestStoreZoneUpdateAndRangeSplit(t *testing.T) {
	defer leaktest.AfterTest(t)
	t.Skip("#3762")
	store, stopper := createTestStore(t)
	config.TestingSetupZoneConfigHook(stopper)
	defer stopper.Stop()

	maxBytes := int64(1 << 16)
	// Set max bytes.
	descID := uint32(keys.MaxReservedDescID + 1)
	config.TestingSetZoneConfig(descID, &config.ZoneConfig{RangeMaxBytes: maxBytes})

	// Trigger gossip callback.
	if err := store.Gossip().AddInfoProto(gossip.KeySystemConfig, &config.SystemConfig{}, 0); err != nil {
		t.Fatal(err)
	}

	// Wait for the range to be split along table boundaries.
	originalRange := store.LookupReplica(roachpb.RKey(keys.UserTableDataMin), nil)
	var rng *storage.Replica
	if err := util.IsTrueWithin(func() bool {
		rng = store.LookupReplica(keys.MakeTablePrefix(descID), nil)
		return rng.RangeID != originalRange.RangeID
	}, splitTimeout); err != nil {
		t.Fatalf("failed to notice range max bytes update: %s", err)
	}

	// Check range's max bytes settings.
	if rng.GetMaxBytes() != maxBytes {
		t.Fatalf("range max bytes mismatch, got: %d, expected: %d", rng.GetMaxBytes(), maxBytes)
	}

	// Make sure the second range goes to the end.
	if !roachpb.RKeyMax.Equal(rng.Desc().EndKey) {
		t.Fatalf("second range has split: %+v", rng.Desc())
	}

	// Look in the range after prefix we're writing to.
	fillRange(store, rng.RangeID, keys.MakeTablePrefix(descID), maxBytes, t)

	// Verify that the range is in fact split (give it a few seconds for very
	// slow test machines).
	var newRng *storage.Replica
	util.SucceedsWithin(t, splitTimeout, func() error {
		newRng = store.LookupReplica(keys.MakeTablePrefix(descID+1), nil)
		if newRng.RangeID == rng.RangeID {
			return util.Errorf("range has not yet split")
		}
		return nil
	})

	// Make sure the new range goes to the end.
	if !roachpb.RKeyMax.Equal(newRng.Desc().EndKey) {
		t.Fatalf("second range has split: %+v", rng.Desc())
	}
}
Beispiel #4
0
// lookupReplica looks up replica by key [range]. Lookups are done
// by consulting each store in turn via Store.LookupRange(key).
// Returns RangeID and replica on success; RangeKeyMismatch error
// if not found.
// TODO(tschottdorf) with a very large number of stores, the LocalSender
// may want to avoid scanning the whole map of stores on each invocation.
func (ls *LocalSender) lookupReplica(start, end proto.Key) (rangeID proto.RangeID, replica *proto.Replica, err error) {
	ls.mu.RLock()
	defer ls.mu.RUnlock()
	var rng *storage.Replica
	for _, store := range ls.storeMap {
		rng = store.LookupReplica(start, end)
		if rng == nil {
			continue
		}
		if replica == nil {
			rangeID = rng.Desc().RangeID
			replica = rng.GetReplica()
			continue
		}
		// Should never happen outside of tests.
		return 0, nil, util.Errorf(
			"range %+v exists on additional store: %+v", rng, store)
	}
	if replica == nil {
		err = proto.NewRangeKeyMismatchError(start, end, nil)
	}
	return rangeID, replica, err
}
// TestStoreZoneUpdateAndRangeSplit verifies that modifying the zone
// configuration changes range max bytes and Range.maybeSplit() takes
// max bytes into account when deciding whether to enqueue a range for
// splitting. It further verifies that the range is in fact split on
// exceeding zone's RangeMaxBytes.
func TestStoreZoneUpdateAndRangeSplit(t *testing.T) {
	defer leaktest.AfterTest(t)
	store, stopper := createTestStore(t)
	config.TestingSetupZoneConfigHook(stopper)
	defer stopper.Stop()

	maxBytes := int64(1 << 16)
	// Set max bytes.
	config.TestingSetZoneConfig(1000, &config.ZoneConfig{RangeMaxBytes: maxBytes})

	// Trigger gossip callback.
	if err := store.Gossip().AddInfoProto(gossip.KeySystemConfig, &config.SystemConfig{}, 0); err != nil {
		t.Fatal(err)
	}

	// Wait for the range to be split along table boundaries.
	originalRange := store.LookupReplica(roachpb.RKeyMin, nil)
	var rng *storage.Replica
	if err := util.IsTrueWithin(func() bool {
		rng = store.LookupReplica(keys.MakeTablePrefix(1000), nil)
		return rng.Desc().RangeID != originalRange.Desc().RangeID
	}, 50*time.Millisecond); err != nil {
		t.Fatalf("failed to notice range max bytes update: %s", err)
	}

	// Check range's max bytes settings.
	if rng.GetMaxBytes() != maxBytes {
		t.Fatalf("range max bytes mismatch, got: %d, expected: %d", rng.GetMaxBytes(), maxBytes)
	}

	// Make sure the second range goes to the end.
	if !roachpb.RKeyMax.Equal(rng.Desc().EndKey) {
		t.Fatalf("second range has split: %+v", rng.Desc())
	}

	// Look in the range after prefix we're writing to.
	fillRange(store, rng.Desc().RangeID, keys.MakeTablePrefix(1000), maxBytes, t)

	// Verify that the range is in fact split (give it a second for very slow test machines).
	var newRng *storage.Replica
	if err := util.IsTrueWithin(func() bool {
		newRng = store.LookupReplica(keys.MakeTablePrefix(2000), nil)
		return newRng.Desc().RangeID != rng.Desc().RangeID
	}, time.Second); err != nil {
		t.Errorf("expected range to split within 1s")
	}

	// Make sure the new range goes to the end.
	if !roachpb.RKeyMax.Equal(newRng.Desc().EndKey) {
		t.Fatalf("second range has split: %+v", rng.Desc())
	}
}