Beispiel #1
0
func unmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()

	if r.HTTPResponse.StatusCode == http.StatusMovedPermanently {
		r.Error = awserr.New("BucketRegionError",
			fmt.Sprintf("incorrect region, the bucket is not in '%s' region", aws.StringValue(r.Config.Region)), nil)
		return
	}

	if r.HTTPResponse.ContentLength == int64(0) {
		// No body, use status code to generate an awserr.Error
		r.Error = awserr.NewRequestFailure(
			awserr.New(strings.Replace(r.HTTPResponse.Status, " ", "", -1), r.HTTPResponse.Status, nil),
			r.HTTPResponse.StatusCode,
			"",
		)
		return
	}

	resp := &xmlErrorResponse{}
	err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
	if err != nil && err != io.EOF {
		r.Error = awserr.New("SerializationError", "failed to decode S3 XML error response", nil)
	} else {
		r.Error = awserr.NewRequestFailure(
			awserr.New(resp.Code, resp.Message, nil),
			r.HTTPResponse.StatusCode,
			"",
		)
	}
}
Beispiel #2
0
func unmarshalError(req *request.Request) {
	bodyBytes, err := ioutil.ReadAll(req.HTTPResponse.Body)
	if err != nil {
		req.Error = awserr.New("UnmarshaleError", req.HTTPResponse.Status, err)
		return
	}
	if len(bodyBytes) == 0 {
		req.Error = awserr.NewRequestFailure(
			awserr.New("UnmarshaleError", req.HTTPResponse.Status, fmt.Errorf("empty body")),
			req.HTTPResponse.StatusCode,
			"",
		)
		return
	}
	var jsonErr jsonErrorResponse
	if err := json.Unmarshal(bodyBytes, &jsonErr); err != nil {
		req.Error = awserr.New("UnmarshaleError", "JSON unmarshal", err)
		return
	}
	req.Error = awserr.NewRequestFailure(
		awserr.New(jsonErr.Code, jsonErr.Message, nil),
		req.HTTPResponse.StatusCode,
		"",
	)
}
Beispiel #3
0
// UnmarshalError unmarshals an error response for a JSON RPC service.
func UnmarshalError(req *request.Request) {
	defer req.HTTPResponse.Body.Close()
	bodyBytes, err := ioutil.ReadAll(req.HTTPResponse.Body)
	if err != nil {
		req.Error = awserr.New("SerializationError", "failed reading JSON RPC error response", err)
		return
	}
	if len(bodyBytes) == 0 {
		req.Error = awserr.NewRequestFailure(
			awserr.New("SerializationError", req.HTTPResponse.Status, nil),
			req.HTTPResponse.StatusCode,
			"",
		)
		return
	}
	var jsonErr jsonErrorResponse
	if err := json.Unmarshal(bodyBytes, &jsonErr); err != nil {
		req.Error = awserr.New("SerializationError", "failed decoding JSON RPC error response", err)
		return
	}

	codes := strings.SplitN(jsonErr.Code, "#", 2)
	req.Error = awserr.NewRequestFailure(
		awserr.New(codes[len(codes)-1], jsonErr.Message, nil),
		req.HTTPResponse.StatusCode,
		req.RequestID,
	)
}
Beispiel #4
0
// UnmarshalError unmarshals a response error for the REST JSON protocol.
func UnmarshalError(r *request.Request) {
	code := r.HTTPResponse.Header.Get("X-Amzn-Errortype")
	bodyBytes, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed reading REST JSON error response", err)
		return
	}
	if len(bodyBytes) == 0 {
		r.Error = awserr.NewRequestFailure(
			awserr.New("SerializationError", r.HTTPResponse.Status, nil),
			r.HTTPResponse.StatusCode,
			"",
		)
		return
	}
	var jsonErr jsonErrorResponse
	if err := json.Unmarshal(bodyBytes, &jsonErr); err != nil {
		r.Error = awserr.New("SerializationError", "failed decoding REST JSON error response", err)
		return
	}

	if code == "" {
		code = jsonErr.Code
	}

	codes := strings.SplitN(code, ":", 2)
	r.Error = awserr.NewRequestFailure(
		awserr.New(codes[0], jsonErr.Message, nil),
		r.HTTPResponse.StatusCode,
		r.RequestID,
	)
}
Beispiel #5
0
// UnmarshalError unmarshals a response error for the EC2 protocol.
func UnmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()

	resp := &xmlErrorResponse{}
	err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
	if err != nil && err != io.EOF {
		r.Error = awserr.New("SerializationError", "failed decoding EC2 Query error response", err)
	} else {
		r.Error = awserr.NewRequestFailure(
			awserr.New(resp.Code, resp.Message, nil),
			r.HTTPResponse.StatusCode,
			resp.RequestID,
		)
	}
}
Beispiel #6
0
// Sign requests with signature version 4.
//
// Will sign the requests with the service config's Credentials object
// Signing is skipped if the credentials is the credentials.AnonymousCredentials
// object.
func Sign(req *request.Request) {
	// If the request does not need to be signed ignore the signing of the
	// request if the AnonymousCredentials object is used.
	if req.Service.Config.Credentials == credentials.AnonymousCredentials {
		return
	}

	region := req.Service.SigningRegion
	if region == "" {
		region = aws.StringValue(req.Service.Config.Region)
	}

	name := req.Service.SigningName
	if name == "" {
		name = req.Service.ServiceName
	}

	s := signer{
		Request:     req.HTTPRequest,
		Time:        req.Time,
		ExpireTime:  req.ExpireTime,
		Query:       req.HTTPRequest.URL.Query(),
		Body:        req.Body,
		ServiceName: name,
		Region:      region,
		Credentials: req.Service.Config.Credentials,
		Debug:       req.Service.Config.LogLevel.Value(),
		Logger:      req.Service.Config.Logger,
	}

	req.Error = s.sign()
}
Beispiel #7
0
// Build builds a JSON payload for a JSON RPC request.
func Build(req *request.Request) {
	var buf []byte
	var err error
	if req.ParamsFilled() {
		buf, err = jsonutil.BuildJSON(req.Params)
		if err != nil {
			req.Error = awserr.New("SerializationError", "failed encoding JSON RPC request", err)
			return
		}
	} else {
		buf = emptyJSON
	}

	if req.ClientInfo.TargetPrefix != "" || string(buf) != "{}" {
		req.SetBufferBody(buf)
	}

	if req.ClientInfo.TargetPrefix != "" {
		target := req.ClientInfo.TargetPrefix + "." + req.Operation.Name
		req.HTTPRequest.Header.Add("X-Amz-Target", target)
	}
	if req.ClientInfo.JSONVersion != "" {
		jsonVersion := req.ClientInfo.JSONVersion
		req.HTTPRequest.Header.Add("Content-Type", "application/x-amz-json-"+jsonVersion)
	}
}
Beispiel #8
0
func validateSSERequiresSSL(r *request.Request) {
	if r.HTTPRequest.URL.Scheme != "https" {
		p, _ := awsutil.ValuesAtPath(r.Params, "SSECustomerKey||CopySourceSSECustomerKey")
		if len(p) > 0 {
			r.Error = errSSERequiresSSL
		}
	}
}
Beispiel #9
0
func buildQueryString(r *request.Request, v reflect.Value, name string, query url.Values) {
	str, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if str != nil {
		query.Set(name, *str)
	}
}
Beispiel #10
0
func buildHeader(r *request.Request, v reflect.Value, name string) {
	str, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if str != nil {
		r.HTTPRequest.Header.Add(name, *str)
	}
}
Beispiel #11
0
func unmarshalError(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	_, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata error respose", err)
	}

	// TODO extract the error...
}
Beispiel #12
0
// Unmarshal unmarshals a response for a JSON RPC service.
func Unmarshal(req *request.Request) {
	defer req.HTTPResponse.Body.Close()
	if req.DataFilled() {
		err := jsonutil.UnmarshalJSON(req.Data, req.HTTPResponse.Body)
		if err != nil {
			req.Error = awserr.New("SerializationError", "failed decoding JSON RPC response", err)
		}
	}
	return
}
Beispiel #13
0
func unmarshalHandler(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	b, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata respose", err)
	}

	data := r.Data.(*metadataOutput)
	data.Content = string(b)
}
Beispiel #14
0
func buildHeaderMap(r *request.Request, v reflect.Value, prefix string) {
	for _, key := range v.MapKeys() {
		str, err := convertType(v.MapIndex(key))
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
		} else if str != nil {
			r.HTTPRequest.Header.Add(prefix+key.String(), *str)
		}
	}
}
Beispiel #15
0
func buildURI(r *request.Request, v reflect.Value, name string) {
	value, err := convertType(v)
	if err != nil {
		r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
	} else if value != nil {
		uri := r.HTTPRequest.URL.Path
		uri = strings.Replace(uri, "{"+name+"}", EscapePath(*value, true), -1)
		uri = strings.Replace(uri, "{"+name+"+}", EscapePath(*value, false), -1)
		r.HTTPRequest.URL.Path = uri
	}
}
Beispiel #16
0
// Unmarshal unmarshals a response body for the EC2 protocol.
func Unmarshal(r *request.Request) {
	defer r.HTTPResponse.Body.Close()
	if r.DataFilled() {
		decoder := xml.NewDecoder(r.HTTPResponse.Body)
		err := xmlutil.UnmarshalXML(r.Data, decoder, "")
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed decoding EC2 Query response", err)
			return
		}
	}
}
Beispiel #17
0
func unmarshalBody(r *request.Request, v reflect.Value) {
	if field, ok := v.Type().FieldByName("_"); ok {
		if payloadName := field.Tag.Get("payload"); payloadName != "" {
			pfield, _ := v.Type().FieldByName(payloadName)
			if ptag := pfield.Tag.Get("type"); ptag != "" && ptag != "structure" {
				payload := v.FieldByName(payloadName)
				if payload.IsValid() {
					switch payload.Interface().(type) {
					case []byte:
						b, err := ioutil.ReadAll(r.HTTPResponse.Body)
						if err != nil {
							r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
						} else {
							payload.Set(reflect.ValueOf(b))
						}
					case *string:
						b, err := ioutil.ReadAll(r.HTTPResponse.Body)
						if err != nil {
							r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
						} else {
							str := string(b)
							payload.Set(reflect.ValueOf(&str))
						}
					default:
						switch payload.Type().String() {
						case "io.ReadSeeker":
							payload.Set(reflect.ValueOf(aws.ReadSeekCloser(r.HTTPResponse.Body)))
						case "aws.ReadSeekCloser", "io.ReadCloser":
							payload.Set(reflect.ValueOf(r.HTTPResponse.Body))
						default:
							r.Error = awserr.New("SerializationError",
								"failed to decode REST response",
								fmt.Errorf("unknown payload type %s", payload.Type()))
						}
					}
				}
			}
		}
	}
}
Beispiel #18
0
// Build builds a request payload for the REST XML protocol.
func Build(r *request.Request) {
	rest.Build(r)

	if t := rest.PayloadType(r.Params); t == "structure" || t == "" {
		var buf bytes.Buffer
		err := xmlutil.BuildXML(r.Params, xml.NewEncoder(&buf))
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to encode rest XML request", err)
			return
		}
		r.SetBufferBody(buf.Bytes())
	}
}
Beispiel #19
0
// Unmarshal unmarshals a payload response for the REST XML protocol.
func Unmarshal(r *request.Request) {
	if t := rest.PayloadType(r.Data); t == "structure" || t == "" {
		defer r.HTTPResponse.Body.Close()
		decoder := xml.NewDecoder(r.HTTPResponse.Body)
		err := xmlutil.UnmarshalXML(r.Data, decoder, "")
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed to decode REST XML response", err)
			return
		}
	} else {
		rest.Unmarshal(r)
	}
}
Beispiel #20
0
// contentMD5 computes and sets the HTTP Content-MD5 header for requests that
// require it.
func contentMD5(r *request.Request) {
	h := md5.New()

	// hash the body.  seek back to the first position after reading to reset
	// the body for transmission.  copy errors may be assumed to be from the
	// body.
	_, err := io.Copy(h, r.Body)
	if err != nil {
		r.Error = awserr.New("ContentMD5", "failed to read body", err)
		return
	}
	_, err = r.Body.Seek(0, 0)
	if err != nil {
		r.Error = awserr.New("ContentMD5", "failed to seek body", err)
		return
	}

	// encode the md5 checksum in base64 and set the request header.
	sum := h.Sum(nil)
	sum64 := make([]byte, base64.StdEncoding.EncodedLen(len(sum)))
	base64.StdEncoding.Encode(sum64, sum)
	r.HTTPRequest.Header.Set("Content-MD5", string(sum64))
}
Beispiel #21
0
func unmarshalLocationElements(r *request.Request, v reflect.Value) {
	for i := 0; i < v.NumField(); i++ {
		m, field := v.Field(i), v.Type().Field(i)
		if n := field.Name; n[0:1] == strings.ToLower(n[0:1]) {
			continue
		}

		if m.IsValid() {
			name := field.Tag.Get("locationName")
			if name == "" {
				name = field.Name
			}

			switch field.Tag.Get("location") {
			case "statusCode":
				unmarshalStatusCode(m, r.HTTPResponse.StatusCode)
			case "header":
				err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name))
				if err != nil {
					r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
					break
				}
			case "headers":
				prefix := field.Tag.Get("locationName")
				err := unmarshalHeaderMap(m, r.HTTPResponse.Header, prefix)
				if err != nil {
					r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
					break
				}
			}
		}
		if r.Error != nil {
			return
		}
	}
}
Beispiel #22
0
func copyMultipartStatusOKUnmarhsalError(r *request.Request) {
	b, err := ioutil.ReadAll(r.HTTPResponse.Body)
	if err != nil {
		r.Error = awserr.New("SerializationError", "unable to read response body", err)
		return
	}
	body := bytes.NewReader(b)
	r.HTTPResponse.Body = aws.ReadSeekCloser(body)
	defer r.HTTPResponse.Body.(aws.ReaderSeekerCloser).Seek(0, 0)

	if body.Len() == 0 {
		// If there is no body don't attempt to parse the body.
		return
	}

	unmarshalError(r)
	if err, ok := r.Error.(awserr.Error); ok && err != nil {
		if err.Code() == "SerializationError" {
			r.Error = nil
			return
		}
		r.HTTPResponse.StatusCode = http.StatusServiceUnavailable
	}
}
Beispiel #23
0
func buildGetBucketLocation(r *request.Request) {
	if r.DataFilled() {
		out := r.Data.(*GetBucketLocationOutput)
		b, err := ioutil.ReadAll(r.HTTPResponse.Body)
		if err != nil {
			r.Error = awserr.New("SerializationError", "failed reading response body", err)
			return
		}

		match := reBucketLocation.FindSubmatch(b)
		if len(match) > 1 {
			loc := string(match[1])
			out.LocationConstraint = &loc
		}
	}
}
Beispiel #24
0
// Build builds a request for the EC2 protocol.
func Build(r *request.Request) {
	body := url.Values{
		"Action":  {r.Operation.Name},
		"Version": {r.ClientInfo.APIVersion},
	}
	if err := queryutil.Parse(body, r.Params, true); err != nil {
		r.Error = awserr.New("SerializationError", "failed encoding EC2 Query request", err)
	}

	if r.ExpireTime == 0 {
		r.HTTPRequest.Method = "POST"
		r.HTTPRequest.Header.Set("Content-Type", "application/x-www-form-urlencoded; charset=utf-8")
		r.SetBufferBody([]byte(body.Encode()))
	} else { // This is a pre-signed request
		r.HTTPRequest.Method = "GET"
		r.HTTPRequest.URL.RawQuery = body.Encode()
	}
}
Beispiel #25
0
func buildLocationElements(r *request.Request, v reflect.Value) {
	query := r.HTTPRequest.URL.Query()

	for i := 0; i < v.NumField(); i++ {
		m := v.Field(i)
		if n := v.Type().Field(i).Name; n[0:1] == strings.ToLower(n[0:1]) {
			continue
		}

		if m.IsValid() {
			field := v.Type().Field(i)
			name := field.Tag.Get("locationName")
			if name == "" {
				name = field.Name
			}
			if m.Kind() == reflect.Ptr {
				m = m.Elem()
			}
			if !m.IsValid() {
				continue
			}

			var err error
			switch field.Tag.Get("location") {
			case "headers": // header maps
				err = buildHeaderMap(&r.HTTPRequest.Header, m, field.Tag.Get("locationName"))
			case "header":
				err = buildHeader(&r.HTTPRequest.Header, m, name)
			case "uri":
				err = buildURI(r.HTTPRequest.URL, m, name)
			case "querystring":
				err = buildQueryString(query, m, name)
			}
			r.Error = err
		}
		if r.Error != nil {
			return
		}
	}

	r.HTTPRequest.URL.RawQuery = query.Encode()
	updatePath(r.HTTPRequest.URL, r.HTTPRequest.URL.Path)
}
Beispiel #26
0
func fillPresignedURL(r *request.Request) {
	if !r.ParamsFilled() {
		return
	}

	params := r.Params.(*CopySnapshotInput)

	// Stop if PresignedURL/DestinationRegion is set
	if params.PresignedUrl != nil || params.DestinationRegion != nil {
		return
	}

	// First generate a copy of parameters
	r.Params = awsutil.CopyOf(r.Params)
	params = r.Params.(*CopySnapshotInput)

	// Set destination region. Avoids infinite handler loop.
	// Also needed to sign sub-request.
	params.DestinationRegion = r.Service.Config.Region

	// Create a new client pointing at source region.
	// We will use this to presign the CopySnapshot request against
	// the source region
	config := r.Service.Config.Copy().
		WithEndpoint("").
		WithRegion(*params.SourceRegion)

	client := New(config)

	// Presign a CopySnapshot request with modified params
	req, _ := client.CopySnapshotRequest(params)
	url, err := req.Presign(300 * time.Second) // 5 minutes should be enough.

	if err != nil { // bubble error back up to original request
		r.Error = err
	}

	// We have our URL, set it on params
	params.PresignedUrl = &url
}
Beispiel #27
0
func validateCRC32(r *request.Request) {
	if r.Error != nil {
		return // already have an error, no need to verify CRC
	}

	// Checksum validation is off, skip
	if aws.BoolValue(r.Config.DisableComputeChecksums) {
		return
	}

	// Try to get CRC from response
	header := r.HTTPResponse.Header.Get("X-Amz-Crc32")
	if header == "" {
		return // No header, skip
	}

	expected, err := strconv.ParseUint(header, 10, 32)
	if err != nil {
		return // Could not determine CRC value, skip
	}

	buf, err := drainBody(r.HTTPResponse.Body, r.HTTPResponse.ContentLength)
	if err != nil { // failed to read the response body, skip
		return
	}

	// Reset body for subsequent reads
	r.HTTPResponse.Body = ioutil.NopCloser(bytes.NewReader(buf.Bytes()))

	// Compute the CRC checksum
	crc := crc32.ChecksumIEEE(buf.Bytes())

	if crc != uint32(expected) {
		// CRC does not match, set a retryable error
		r.Retryable = aws.Bool(true)
		r.Error = awserr.New("CRC32CheckFailed", "CRC32 integrity check failed", nil)
	}
}
Beispiel #28
0
func fillPresignedURL(r *request.Request) {
	if !r.ParamsFilled() {
		return
	}

	origParams := r.Params.(*CopySnapshotInput)

	// Stop if PresignedURL/DestinationRegion is set
	if origParams.PresignedUrl != nil || origParams.DestinationRegion != nil {
		return
	}

	origParams.DestinationRegion = r.Config.Region
	newParams := awsutil.CopyOf(r.Params).(*CopySnapshotInput)

	// Create a new request based on the existing request. We will use this to
	// presign the CopySnapshot request against the source region.
	cfg := r.Config.Copy(aws.NewConfig().
		WithEndpoint("").
		WithRegion(aws.StringValue(origParams.SourceRegion)))

	clientInfo := r.ClientInfo
	clientInfo.Endpoint, clientInfo.SigningRegion = endpoints.EndpointForRegion(
		clientInfo.ServiceName, aws.StringValue(cfg.Region), aws.BoolValue(cfg.DisableSSL))

	// Presign a CopySnapshot request with modified params
	req := request.New(*cfg, clientInfo, r.Handlers, r.Retryer, r.Operation, newParams, r.Data)
	url, err := req.Presign(5 * time.Minute) // 5 minutes should be enough.
	if err != nil {                          // bubble error back up to original request
		r.Error = err
		return
	}

	// We have our URL, set it on params
	origParams.PresignedUrl = &url
}
Beispiel #29
0
func buildBody(r *request.Request, v reflect.Value) {
	if field, ok := v.Type().FieldByName("SDKShapeTraits"); ok {
		if payloadName := field.Tag.Get("payload"); payloadName != "" {
			pfield, _ := v.Type().FieldByName(payloadName)
			if ptag := pfield.Tag.Get("type"); ptag != "" && ptag != "structure" {
				payload := reflect.Indirect(v.FieldByName(payloadName))
				if payload.IsValid() && payload.Interface() != nil {
					switch reader := payload.Interface().(type) {
					case io.ReadSeeker:
						r.SetReaderBody(reader)
					case []byte:
						r.SetBufferBody(reader)
					case string:
						r.SetStringBody(reader)
					default:
						r.Error = awserr.New("SerializationError",
							"failed to encode REST request",
							fmt.Errorf("unknown payload type %s", payload.Type()))
					}
				}
			}
		}
	}
}
Beispiel #30
0
func validateEndpointHandler(r *request.Request) {
	if r.ClientInfo.Endpoint == "" {
		r.Error = aws.ErrMissingEndpoint
	}
}