func Init(root string, config map[string]string) (convoydriver.ConvoyDriver, error) {
devicemapper.LogInitVerbose(1)
devicemapper.LogInit(&DMLogger{})
if err := checkEnvironment(); err != nil {
return nil, err
}
if err := util.MkdirIfNotExists(root); err != nil {
return nil, err
}
dev := &Device{
Root: root,
}
exists, err := util.ObjectExists(dev)
if err != nil {
return nil, err
}
if exists {
if err := util.ObjectLoad(dev); err != nil {
return nil, err
}
d := &Driver{
Mutex: &sync.Mutex{},
Device: *dev,
}
if err := d.activatePool(); err != nil {
return nil, err
}
if err := d.remountVolumes(); err != nil {
return nil, err
}
return d, nil
}
dev, err = verifyConfig(config)
if err != nil {
return nil, err
}
dev.Root = root
dataDev, err := os.Open(dev.DataDevice)
if err != nil {
return nil, err
}
defer dataDev.Close()
metadataDev, err := os.Open(dev.MetadataDevice)
if err != nil {
return nil, err
}
defer metadataDev.Close()
thinpSize, err := devicemapper.GetBlockDeviceSize(dataDev)
if err != nil {
return nil, err
}
dev.ThinpoolSize = int64(thinpSize)
dev.LastDevID = 0
if err = createPool(filepath.Base(dev.ThinpoolDevice), dataDev, metadataDev, uint32(dev.ThinpoolBlockSize)); err != nil {
return nil, err
}
if err = util.ObjectSave(dev); err != nil {
return nil, err
}
d := &Driver{
Mutex: &sync.Mutex{},
Device: *dev,
}
return d, nil
}
func (devices *DeviceSet) initDevmapper(doInit bool) error {
if os.Getenv("DEBUG") != "" {
devicemapper.LogInitVerbose(devicemapper.LogLevelDebug)
} else {
devicemapper.LogInitVerbose(devicemapper.LogLevelWarn)
}
// give ourselves to libdm as a log handler
devicemapper.LogInit(devices)
_, err := devicemapper.GetDriverVersion()
if err != nil {
// Can't even get driver version, assume not supported
return graphdriver.ErrNotSupported
}
// https://github.com/docker/docker/issues/4036
if supported := devicemapper.UdevSetSyncSupport(true); !supported {
log.Warnf("WARNING: Udev sync is not supported. This will lead to unexpected behavior, data loss and errors")
}
log.Debugf("devicemapper: udev sync support: %v", devicemapper.UdevSyncSupported())
if err := os.MkdirAll(devices.metadataDir(), 0700); err != nil && !os.IsExist(err) {
return err
}
// Set the device prefix from the device id and inode of the docker root dir
st, err := os.Stat(devices.root)
if err != nil {
return fmt.Errorf("Error looking up dir %s: %s", devices.root, err)
}
sysSt := st.Sys().(*syscall.Stat_t)
// "reg-" stands for "regular file".
// In the future we might use "dev-" for "device file", etc.
// docker-maj,min[-inode] stands for:
// - Managed by docker
// - The target of this device is at major <maj> and minor <min>
// - If <inode> is defined, use that file inside the device as a loopback image. Otherwise use the device itself.
devices.devicePrefix = fmt.Sprintf("docker-%d:%d-%d", major(sysSt.Dev), minor(sysSt.Dev), sysSt.Ino)
log.Debugf("Generated prefix: %s", devices.devicePrefix)
// Check for the existence of the thin-pool device
log.Debugf("Checking for existence of the pool '%s'", devices.getPoolName())
info, err := devicemapper.GetInfo(devices.getPoolName())
if info == nil {
log.Debugf("Error device devicemapper.GetInfo: %s", err)
return err
}
// It seems libdevmapper opens this without O_CLOEXEC, and go exec will not close files
// that are not Close-on-exec, and lxc-start will die if it inherits any unexpected files,
// so we add this badhack to make sure it closes itself
setCloseOnExec("/dev/mapper/control")
// Make sure the sparse images exist in <root>/devicemapper/data and
// <root>/devicemapper/metadata
createdLoopback := false
// If the pool doesn't exist, create it
if info.Exists == 0 && devices.thinPoolDevice == "" {
log.Debugf("Pool doesn't exist. Creating it.")
var (
dataFile *os.File
metadataFile *os.File
)
if devices.dataDevice == "" {
// Make sure the sparse images exist in <root>/devicemapper/data
hasData := devices.hasImage("data")
if !doInit && !hasData {
return errors.New("Loopback data file not found")
}
if !hasData {
createdLoopback = true
}
data, err := devices.ensureImage("data", devices.dataLoopbackSize)
if err != nil {
log.Debugf("Error device ensureImage (data): %s", err)
return err
}
dataFile, err = devicemapper.AttachLoopDevice(data)
if err != nil {
return err
}
devices.dataLoopFile = data
devices.dataDevice = dataFile.Name()
} else {
dataFile, err = os.OpenFile(devices.dataDevice, os.O_RDWR, 0600)
if err != nil {
return err
}
}
defer dataFile.Close()
if devices.metadataDevice == "" {
// Make sure the sparse images exist in <root>/devicemapper/metadata
hasMetadata := devices.hasImage("metadata")
if !doInit && !hasMetadata {
return errors.New("Loopback metadata file not found")
}
if !hasMetadata {
createdLoopback = true
}
metadata, err := devices.ensureImage("metadata", devices.metaDataLoopbackSize)
if err != nil {
log.Debugf("Error device ensureImage (metadata): %s", err)
return err
}
metadataFile, err = devicemapper.AttachLoopDevice(metadata)
if err != nil {
return err
}
devices.metadataLoopFile = metadata
devices.metadataDevice = metadataFile.Name()
} else {
metadataFile, err = os.OpenFile(devices.metadataDevice, os.O_RDWR, 0600)
if err != nil {
return err
}
}
defer metadataFile.Close()
if err := devicemapper.CreatePool(devices.getPoolName(), dataFile, metadataFile, devices.thinpBlockSize); err != nil {
return err
}
}
// If we didn't just create the data or metadata image, we need to
// load the transaction id and migrate old metadata
if !createdLoopback {
if err = devices.initMetaData(); err != nil {
return err
}
}
// Right now this loads only NextDeviceId. If there is more metatadata
// down the line, we might have to move it earlier.
if err = devices.loadDeviceSetMetaData(); err != nil {
return err
}
// Setup the base image
if doInit {
if err := devices.setupBaseImage(); err != nil {
log.Debugf("Error device setupBaseImage: %s", err)
return err
}
}
return nil
}
func Init(root, cfgName string, config map[string]string) (drivers.Driver, error) {
devicemapper.LogInitVerbose(1)
devicemapper.LogInit(&DMLogger{})
if supported := devicemapper.UdevSetSyncSupport(true); !supported {
return nil, fmt.Errorf("Udev sync is not supported. Cannot proceed.")
}
if util.ConfigExists(root, cfgName) {
dev := Device{}
err := util.LoadConfig(root, cfgName, &dev)
d := &Driver{
Mutex: &sync.Mutex{},
}
if err != nil {
return d, err
}
d.Device = dev
d.configName = cfgName
d.root = root
if err := d.activatePool(); err != nil {
return d, err
}
return d, nil
}
dev, err := verifyConfig(config)
if err != nil {
return nil, err
}
dev.Root = root
dataDev, err := os.Open(dev.DataDevice)
if err != nil {
return nil, err
}
defer dataDev.Close()
metadataDev, err := os.Open(dev.MetadataDevice)
if err != nil {
return nil, err
}
defer metadataDev.Close()
thinpSize, err := devicemapper.GetBlockDeviceSize(dataDev)
if err != nil {
return nil, err
}
dev.ThinpoolSize = int64(thinpSize)
dev.LastDevID = 0
err = createPool(filepath.Base(dev.ThinpoolDevice), dataDev, metadataDev, uint32(dev.ThinpoolBlockSize))
if err != nil {
return nil, err
}
err = util.SaveConfig(root, cfgName, &dev)
if err != nil {
return nil, err
}
d := &Driver{
root: root,
configName: cfgName,
Device: *dev,
Mutex: &sync.Mutex{},
}
log.Debug("Init done")
return d, nil
}