Beispiel #1
0
func deletePeerHandler(w http.ResponseWriter, r *http.Request) {

	// FIXME: This is not txn based, yet. Behaviour when multiple simultaneous
	// delete peer requests are sent to same node is unknown.

	peerReq := mux.Vars(r)

	id := peerReq["peerid"]
	if id == "" {
		rest.SendHTTPError(w, http.StatusBadRequest, "peerid not present in the request")
		return
	}
	// Check whether the member exists
	p, e := peer.GetPeerF(id)
	if e != nil || p == nil {
		rest.SendHTTPError(w, http.StatusNotFound, "peer not found in cluster")
		return
	}

	// Removing self should be disallowed (like in glusterd1)
	if id == gdctx.MyUUID.String() {
		rest.SendHTTPError(w, http.StatusBadRequest, "Removing self is disallowed.")
		return
	}

	remotePeerAddress, err := utils.FormRemotePeerAddress(p.Addresses[0])
	if err != nil {
		rest.SendHTTPError(w, http.StatusBadRequest, err.Error())
		return
	}

	// Validate whether the peer can be deleted
	rsp, e := ValidateDeletePeer(remotePeerAddress, id)
	if e != nil {
		rest.SendHTTPError(w, http.StatusInternalServerError, rsp.OpError)
		return
	}

	// Remove the peer from the store
	if e := peer.DeletePeer(id); e != nil {
		log.WithFields(log.Fields{
			"er":   e,
			"peer": id,
		}).Error("Failed to remove peer from the store")
		rest.SendHTTPError(w, http.StatusInternalServerError, e.Error())
	} else {
		rest.SendHTTPResponse(w, http.StatusNoContent, nil)
	}

	// Delete member from etcd cluster
	e = etcdmgmt.EtcdMemberRemove(p.MemberID)
	if e != nil {
		log.WithFields(log.Fields{
			"er":   e,
			"peer": id,
		}).Error("Failed to remove member from etcd cluster")

		rest.SendHTTPError(w, http.StatusInternalServerError, e.Error())
		return
	}

	// Remove data dir of etcd on remote machine. Restart etcd on remote machine
	// in standalone (single cluster) mode.
	var etcdConf EtcdConfigReq
	etcdConf.DeletePeer = true
	etcdrsp, e := ConfigureRemoteETCD(remotePeerAddress, &etcdConf)
	if e != nil {
		log.WithField("err", e).Error("Failed to configure remote etcd.")
		rest.SendHTTPError(w, http.StatusInternalServerError, etcdrsp.OpError)
		return
	}
}
Beispiel #2
0
func addPeerHandler(w http.ResponseWriter, r *http.Request) {

	// FIXME: This is not txn based, yet. Behaviour when multiple simultaneous
	// add peer requests are sent to same node is unknown.

	var req PeerAddReq
	if e := utils.GetJSONFromRequest(r, &req); e != nil {
		rest.SendHTTPError(w, http.StatusBadRequest, e.Error())
		return
	}

	if len(req.Addresses) < 1 {
		rest.SendHTTPError(w, http.StatusBadRequest, errors.ErrNoHostnamesPresent.Error())
		return
	}

	// A peer can have multiple addresses. For now, we use only the first
	// address present in the req.Addresses list.

	remotePeerAddress, err := utils.FormRemotePeerAddress(req.Addresses[0])
	if err != nil {
		rest.SendHTTPError(w, http.StatusBadRequest, err.Error())
		return
	}

	// This remote call will return the remote peer's ID (UUID), name
	// and etcd peer url.
	remotePeer, e := ValidateAddPeer(remotePeerAddress, &req)
	if e != nil {
		rest.SendHTTPError(w, http.StatusInternalServerError, remotePeer.OpError)
		return
	}

	// TODO: Parse addresses considering ports to figure this out.
	if isPeerInCluster(remotePeer.UUID) {
		rest.SendHTTPError(w, http.StatusInternalServerError, "Peer already in cluster")
		return
	}

	// If user hasn't specified peer name, use the name returned by remote
	// peer which defaults to it's hostname.
	if req.Name == "" {
		req.Name = remotePeer.PeerName
	}

	// Adding a member is a two step process:
	// 	1. Add the new member to the cluster via the members API. This is
	//	   performed on this node i.e the one that just accepted peer add
	//	   request from the user.
	//	2. Start the new member on the target node (the new peer) with the new
	//         cluster configuration, including a list of the updated members
	//	   (existing members + the new member).

	newMember, e := etcdmgmt.EtcdMemberAdd("http://" + remotePeer.EtcdPeerAddress)
	if e != nil {
		log.WithFields(log.Fields{
			"error":   e,
			"uuid":    remotePeer.UUID,
			"name":    req.Name,
			"address": remotePeer.EtcdPeerAddress,
		}).Error("Failed to add member to etcd cluster.")
		rest.SendHTTPError(w, http.StatusInternalServerError, e.Error())
		return
	}

	log.WithField("member-id", newMember.ID).Info("Added new member to etcd cluster")

	mlist, e := etcdmgmt.EtcdMemberList()
	if e != nil {
		log.WithField("error", e).Error("Failed to list members in etcd cluster")
		rest.SendHTTPError(w, http.StatusInternalServerError, e.Error())
		return
	}

	// Member name of the newly added etcd member has not been set at this point.
	conf := []string{}
	for _, memb := range mlist {
		for _, u := range memb.PeerURLs {
			n := memb.Name
			if memb.ID == newMember.ID {
				n = remotePeer.UUID
			}
			conf = append(conf, fmt.Sprintf("%s=%s", n, u))
		}
	}

	var etcdConf EtcdConfigReq
	etcdConf.EtcdName = remotePeer.UUID
	etcdConf.InitialCluster = strings.Join(conf, ",")
	etcdConf.ClusterState = "existing"

	log.WithField("initial-cluster", etcdConf.InitialCluster).Debug("Reconfiguring etcd on remote peer")

	etcdrsp, e := ConfigureRemoteETCD(remotePeerAddress, &etcdConf)
	if e != nil {
		log.WithField("err", e).Error("Failed to configure remote etcd")
		rest.SendHTTPError(w, http.StatusInternalServerError, etcdrsp.OpError)
		return
	}

	// Create a new peer object and add it to the store.
	p := &peer.Peer{
		ID:        uuid.Parse(remotePeer.UUID),
		Name:      req.Name,
		Addresses: req.Addresses,
		MemberID:  newMember.ID,
	}
	if e = peer.AddOrUpdatePeer(p); e != nil {
		log.WithFields(log.Fields{
			"error":     e,
			"peer/node": p.Name,
		}).Error("Failed to add peer into the etcd store")
		rest.SendHTTPError(w, http.StatusInternalServerError, e.Error())
		return
	}

	body := map[string]uuid.UUID{"id": p.ID}
	rest.SendHTTPResponse(w, http.StatusCreated, body)
}
Beispiel #3
0
// RunStepOn will run the step on the specified node
func RunStepOn(step string, node uuid.UUID, c TxnCtx) (TxnCtx, error) {
	// TODO: I'm creating connections on demand. This should be changed so that
	// we have long term connections.
	p, err := peer.GetPeerF(node.String())
	if err != nil {
		c.Logger().WithFields(log.Fields{
			"peerid": node.String(),
			"error":  err,
		}).Error("peer not found")
		return nil, err
	}

	logger := c.Logger().WithField("remotepeer", p.ID.String()+"("+p.Name+")")

	var conn *grpc.ClientConn

	remote, err := utils.FormRemotePeerAddress(p.Addresses[0])
	if err != nil {
		return nil, err
	}

	conn, err = grpc.Dial(remote, grpc.WithInsecure())
	if err == nil && conn != nil {
		logger.WithFields(log.Fields{
			"remote": remote,
		}).Debug("connected to remote")
	}

	if conn == nil {
		logger.WithFields(log.Fields{
			"error":  err,
			"remote": p.Addresses,
		}).Error("failed to grpc.Dial remote")
		return nil, err
	}
	defer conn.Close()

	client := NewTxnSvcClient(conn)

	req := &TxnStepReq{
		StepFunc: step,
	}
	data, err := json.Marshal(c)
	if err != nil {
		logger.WithError(err).Error("failed to JSON marshal transaction context")
		return nil, err
	}
	req.Context = data

	var rsp *TxnStepResp

	rsp, err = client.RunStep(netctx.TODO(), req)
	if err != nil {
		logger.WithFields(log.Fields{
			"error": err,
			"rpc":   "TxnSvc.RunStep",
		}).Error("failed RPC call")
		return nil, err
	}

	if rsp.Error != "" {
		logger.WithError(errors.New(rsp.Error)).Error("TxnSvc.Runstep failed on peer")
		return nil, errors.New(rsp.Error)
	}

	rspCtx := new(Tctx)
	err = json.Unmarshal(rsp.Resp, rspCtx)
	if err != nil {
		logger.WithError(err).Error("failed to JSON unmarhsal transaction context")
	}

	return rspCtx, err
}