func main() {
var err error
var dev *rtl.Context
//---------- Device Check ----------
if c := rtl.GetDeviceCount(); c == 0 {
log.Fatal("No devices found, exiting.\n")
} else {
for i := 0; i < c; i++ {
m, p, s, err := rtl.GetDeviceUsbStrings(i)
if err == nil {
err = errors.New("")
}
log.Printf("GetDeviceUsbStrings %s - %s %s %s\n",
err, m, p, s)
}
}
log.Printf("===== Device name: %s =====\n", rtl.GetDeviceName(0))
log.Printf("===== Running tests using device indx: 0 =====\n")
//---------- Open Device ----------
if dev, err = rtl.Open(0); err != nil {
log.Fatal("\tOpen Failed, exiting\n")
}
defer dev.Close()
//---------- Device Strings ----------
m, p, s, err := dev.GetUsbStrings()
if err != nil {
log.Printf("\tGetUsbStrings Failed - error: %s\n", err)
} else {
log.Printf("\tGetUsbStrings - %s %s %s\n", m, p, s)
}
log.Printf("\tGetTunerType: %s\n", dev.GetTunerType())
//---------- Device Info ----------
info, err := dev.GetHwInfo()
if err != nil {
log.Printf("\tGetHwInfo Failed - error: %s\n", err)
} else {
log.Printf("\tVendor ID : 0x%X\n", info.VendorID)
log.Printf("\tProduct ID : 0x%X\n", info.ProductID)
log.Println("\tManufacturer : ", info.Manufact)
log.Println("\tProduct : ", info.Product)
log.Println("\tSerial : ", info.Serial)
log.Println("\tHave Serial : ", info.HaveSerial)
log.Println("\tEnable IR : ", info.EnableIR)
log.Println("\tRemote Wakeup : ", info.RemoteWakeup)
}
ppm, err := kal.Kal((*kal.Context)(dev), kal.GSM850)
log.Printf("PPM: %d\n", ppm)
log.Printf("err: %s\n", err)
}
func main() {
runtime.GOMAXPROCS(3)
var status int
var dev *rtl.Context
if c := rtl.GetDeviceCount(); c == 0 {
log.Fatal("No devices found, exiting.\n")
} else {
for i := 0; i < c; i++ {
m, p, s, status := rtl.GetDeviceUsbStrings(i)
log.Printf("GetDeviceUsbStrings %s - %s %s %s\n",
rtl.Status[status], m, p, s)
}
}
log.Printf("===== Device name: %s =====\n", rtl.GetDeviceName(0))
log.Printf("===== Running tests using device indx: %d =====\n", 0)
if dev, status = rtl.Open(0); status != rtl.Success {
log.Fatal("\tOpen Failed, exiting\n")
}
defer dev.Close()
go sig_abort(dev)
m, p, s, status := dev.GetUsbStrings()
log.Printf("\tGetUsbStrings %s - %s %s %s\n", rtl.Status[status], m, p, s)
g, status := dev.GetTunerGains()
log.Printf("\tGetTunerGains %s\n", rtl.Status[status])
if status == rtl.Success {
fmt.Printf("\tGains: ")
for _, j := range g {
fmt.Printf("%d ", j)
}
fmt.Printf("\n")
}
log.Printf("\tSetSampleRate %s - rate: %d\n",
rtl.Status[dev.SetSampleRate(rtl.DefaultSampleRate)], rtl.DefaultSampleRate)
log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())
// status = dev.SetXtalFreq(rtl_freq, tuner_freq)
// log.Printf("\tSetXtalFreq %s - Center freq: %d, Tuner freq: %d\n",
// rtl.Status[status], rtl_freq, tuner_freq)
rtl_freq, tuner_freq, status := dev.GetXtalFreq()
log.Printf("\tGetXtalFreq %s - Rtl: %d, Tuner: %d\n",
rtl.Status[status], rtl_freq, tuner_freq)
status = dev.SetCenterFreq(850000000)
if status < 0 {
log.Println("\tSetCenterFreq 850MHz Failed, error code: %d\n", status)
} else {
log.Println("\tSetCenterFreq 850MHz Successful")
}
log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())
log.Printf("\tGetFreqCorrection: %d\n", dev.GetFreqCorrection())
log.Printf("\tGetTunerType: %s\n", rtl.TunerType[dev.GetTunerType()])
log.Printf("\tSetTunerGainMode: %s\n", rtl.TunerType[dev.SetTunerGainMode(rtl.GainAuto)])
log.Printf("\tGetTunerGain: %d\n", dev.GetTunerGain())
/*
func (c *Context) SetFreqCorrection(ppm int) (err int)
func (c *Context) SetTunerGain(gain int) (err int)
func (c *Context) SetTunerIfGain(stage, gain int) (err int)
func (c *Context) SetAgcMode(on int) (err int)
func (c *Context) SetDirectSampling(on int) (err int)
*/
if status = dev.SetTestMode(1); status < 1 {
log.Printf("\tSetTestMode 'On' Failed - error code: %d\n", status)
} else {
log.Printf("\tSetTestMode 'On' Successful\n")
}
log.Printf("\tResetBuffer %s\n", rtl.Status[dev.ResetBuffer()])
var buffer []byte = make([]uint8, rtl.DefaultBufLength)
n_read, status := dev.ReadSync(buffer, rtl.DefaultBufLength)
log.Printf("\tReadSync %s\n", rtl.Status[status])
if status == rtl.Success && n_read < rtl.DefaultBufLength {
log.Println("ReadSync short read, %d samples lost\n", rtl.DefaultBufLength-n_read)
}
if status = dev.SetTestMode(1); status < 1 {
log.Printf("\tSetTestMode 'Off' Fail - error code: %d\n", status)
} else {
log.Printf("\tSetTestMode 'Off' Success\n")
}
// Note, ReadAsync blocks until CancelAsync is called, so spawn
// a goroutine running in its own system thread that'll wait
// for the async-read callback to signal when it's done.
IQch := make(chan bool)
go async_stop(dev, IQch)
var userctx rtl.UserCtx = IQch
status = dev.ReadAsync(rtlsdr_cb, &userctx, rtl.DefaultAsyncBufNumber, rtl.DefaultBufLength)
log.Printf("\tReadAsync %s\n", rtl.Status[status])
log.Printf("Exiting...\n")
}
// Read 978MHz from SDR.
func sdrReader() {
var err error
var dev *rtl.Context
log.Printf("===== UAT Device name: %s =====\n", rtl.GetDeviceName(uatSDR))
if dev, err = rtl.Open(uatSDR); err != nil {
log.Printf("\tOpen Failed, exiting\n")
uatSDR = -1
return
}
defer dev.Close()
m, p, s, err := dev.GetUsbStrings()
if err != nil {
log.Printf("\tGetUsbStrings Failed - error: %s\n", err)
} else {
log.Printf("\tGetUsbStrings - %s %s %s\n", m, p, s)
}
log.Printf("\tGetTunerType: %s\n", dev.GetTunerType())
//---------- Set Tuner Gain ----------
tgain := 480
err = dev.SetTunerGainMode(true)
if err != nil {
log.Printf("\tSetTunerGainMode Failed - error: %s\n", err)
} else {
log.Printf("\tSetTunerGainMode Successful\n")
}
err = dev.SetTunerGain(tgain)
if err != nil {
log.Printf("\tSetTunerGain Failed - error: %s\n", err)
} else {
log.Printf("\tSetTunerGain Successful\n")
}
//---------- Get/Set Sample Rate ----------
samplerate := 2083334
err = dev.SetSampleRate(samplerate)
if err != nil {
log.Printf("\tSetSampleRate Failed - error: %s\n", err)
} else {
log.Printf("\tSetSampleRate - rate: %d\n", samplerate)
}
log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())
//---------- Get/Set Xtal Freq ----------
rtlFreq, tunerFreq, err := dev.GetXtalFreq()
if err != nil {
log.Printf("\tGetXtalFreq Failed - error: %s\n", err)
} else {
log.Printf("\tGetXtalFreq - Rtl: %d, Tuner: %d\n", rtlFreq, tunerFreq)
}
newRTLFreq := 28800000
newTunerFreq := 28800000
err = dev.SetXtalFreq(newRTLFreq, newTunerFreq)
if err != nil {
log.Printf("\tSetXtalFreq Failed - error: %s\n", err)
} else {
log.Printf("\tSetXtalFreq - Center freq: %d, Tuner freq: %d\n",
newRTLFreq, newTunerFreq)
}
//---------- Get/Set Center Freq ----------
err = dev.SetCenterFreq(978000000)
if err != nil {
log.Printf("\tSetCenterFreq 978MHz Failed, error: %s\n", err)
} else {
log.Printf("\tSetCenterFreq 978MHz Successful\n")
}
log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())
//---------- Set Bandwidth ----------
bw := 1000000
log.Printf("\tSetting Bandwidth: %d\n", bw)
if err = dev.SetTunerBw(bw); err != nil {
log.Printf("\tSetTunerBw %d Failed, error: %s\n", bw, err)
} else {
log.Printf("\tSetTunerBw %d Successful\n", bw)
}
if err = dev.ResetBuffer(); err == nil {
log.Printf("\tResetBuffer Successful\n")
} else {
log.Printf("\tResetBuffer Failed - error: %s\n", err)
}
//---------- Get/Set Freq Correction ----------
freqCorr := dev.GetFreqCorrection()
log.Printf("\tGetFreqCorrection: %d\n", freqCorr)
err = dev.SetFreqCorrection(globalSettings.PPM)
if err != nil {
log.Printf("\tSetFreqCorrection %d Failed, error: %s\n", globalSettings.PPM, err)
} else {
log.Printf("\tSetFreqCorrection %d Successful\n", globalSettings.PPM)
}
for uatSDR != -1 {
var buffer = make([]uint8, rtl.DefaultBufLength)
nRead, err := dev.ReadSync(buffer, rtl.DefaultBufLength)
if err != nil {
log.Printf("\tReadSync Failed - error: %s\n", err)
uatSDR = -1
break
} else {
// log.Printf("\tReadSync %d\n", nRead)
buf := buffer[:nRead]
godump978.InChan <- buf
}
}
}
func main() {
var err error
var dev *rtl.Context
//---------- Device Check ----------
if c := rtl.GetDeviceCount(); c == 0 {
log.Fatal("No devices found, exiting.\n")
} else {
for i := 0; i < c; i++ {
m, p, s, err := rtl.GetDeviceUsbStrings(i)
if err == nil {
err = errors.New("")
}
log.Printf("GetDeviceUsbStrings %s - %s %s %s\n",
err, m, p, s)
}
}
log.Printf("===== Device name: %s =====\n", rtl.GetDeviceName(0))
log.Printf("===== Running tests using device indx: 0 =====\n")
//---------- Open Device ----------
if dev, err = rtl.Open(0); err != nil {
log.Fatal("\tOpen Failed, exiting\n")
}
defer dev.Close()
go sigAbort(dev)
//---------- Device Strings ----------
m, p, s, err := dev.GetUsbStrings()
if err != nil {
log.Printf("\tGetUsbStrings Failed - error: %s\n", err)
} else {
log.Printf("\tGetUsbStrings - %s %s %s\n", m, p, s)
}
log.Printf("\tGetTunerType: %s\n", dev.GetTunerType())
//---------- Set Tuner Gain ----------
tgain := 480
err = dev.SetTunerGainMode(true)
if err != nil {
log.Printf("\tSetTunerGainMode Failed - error: %s\n", err)
} else {
log.Printf("\tSetTunerGainMode Successful\n")
}
err = dev.SetTunerGain(tgain)
if err != nil {
log.Printf("\tSetTunerGain Failed - error: %s\n", err)
} else {
log.Printf("\tSetTunerGain Successful\n")
}
//---------- Get/Set Sample Rate ----------
samplerate := 2083334
err = dev.SetSampleRate(samplerate)
if err != nil {
log.Printf("\tSetSampleRate Failed - error: %s\n", err)
} else {
log.Printf("\tSetSampleRate - rate: %d\n", samplerate)
}
log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())
//---------- Get/Set Xtal Freq ----------
rtlFreq, tunerFreq, err := dev.GetXtalFreq()
if err != nil {
log.Printf("\tGetXtalFreq Failed - error: %s\n", err)
} else {
log.Printf("\tGetXtalFreq - Rtl: %d, Tuner: %d\n", rtlFreq, tunerFreq)
}
newRTLFreq := 28800000
newTunerFreq := 28800000
err = dev.SetXtalFreq(newRTLFreq, newTunerFreq)
if err != nil {
log.Printf("\tSetXtalFreq Failed - error: %s\n", err)
} else {
log.Printf("\tSetXtalFreq - Center freq: %d, Tuner freq: %d\n",
newRTLFreq, newTunerFreq)
}
//---------- Get/Set Center Freq ----------
err = dev.SetCenterFreq(978000000)
if err != nil {
log.Printf("\tSetCenterFreq 978MHz Failed, error: %s\n", err)
} else {
log.Printf("\tSetCenterFreq 978MHz Successful\n")
}
log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())
//---------- Set Bandwidth ----------
bw := 1000000
log.Printf("\tSetting Bandwidth: %d\n", bw)
if err = dev.SetTunerBw(bw); err != nil {
log.Printf("\tSetTunerBw %d Failed, error: %s\n", bw, err)
} else {
log.Printf("\tSetTunerBw %d Successful\n", bw)
}
/*
//---------- Get/Set Freq Correction ----------
freqCorr := dev.GetFreqCorrection()
log.Printf("\tGetFreqCorrection: %d\n", freqCorr)
err = dev.SetFreqCorrection(0) // 10ppm
if err != nil {
log.Printf("\tSetFreqCorrection %d Failed, error: %s\n", 0, err)
} else {
log.Printf("\tSetFreqCorrection %d Successful\n", 0)
}
//---------- Get/Set AGC Mode ----------
if err = dev.SetAgcMode(false); err == nil {
log.Printf("\tSetAgcMode off Successful\n")
} else {
log.Printf("\tSetAgcMode Failed, error: %s\n", err)
}
//---------- Get/Set Direct Sampling ----------
if mode, err := dev.GetDirectSampling(); err == nil {
log.Printf("\tGetDirectSampling Successful, mode: %s\n",
rtl.SamplingModes[mode])
} else {
log.Printf("\tSetTestMode 'On' Failed - error: %s\n", err)
}
if err = dev.SetDirectSampling(rtl.SamplingNone); err == nil {
log.Printf("\tSetDirectSampling 'On' Successful\n")
} else {
log.Printf("\tSetDirectSampling 'On' Failed - error: %s\n", err)
}
*/
//---------- Get/Set Tuner IF Gain ----------
// if err = SetTunerIfGain(stage, gain: int); err == nil {
// log.Printf("\SetTunerIfGain Successful\n")
// } else {
// log.Printf("\tSetTunerIfGain Failed - error: %s\n", err)
// }
/*
//---------- Get/Set test mode ----------
if err = dev.SetTestMode(true); err == nil {
log.Printf("\tSetTestMode 'On' Successful\n")
} else {
log.Printf("\tSetTestMode 'On' Failed - error: %s\n", err)
}
if err = dev.SetTestMode(false); err == nil {
log.Printf("\tSetTestMode 'Off' Successful\n")
} else {
log.Printf("\tSetTestMode 'Off' Fail - error: %s\n", err)
}
*/
//---------- Get/Set misc. streaming ----------
godump978.Dump978Init()
go printUAT()
go godump978.ProcessDataFromChannel()
if err = dev.ResetBuffer(); err == nil {
log.Printf("\tResetBuffer Successful\n")
} else {
log.Printf("\tResetBuffer Failed - error: %s\n", err)
}
for {
var buffer = make([]uint8, rtl.DefaultBufLength)
nRead, err := dev.ReadSync(buffer, rtl.DefaultBufLength)
if err != nil {
log.Printf("\tReadSync Failed - error: %s\n", err)
} else {
log.Printf("\tReadSync %d\n", nRead)
// buf := buffer[:nRead]
// godump978.InChan <- buf
}
}
}