// newFixture returns a new fixture with a running worker. The caller
// takes responsibility for stopping the worker (most easily accomplished
// by deferring a TearDown).
func newFixture(c *gc.C) *fixture {
manifold := fortress.Manifold()
worker, err := manifold.Start(nil)
c.Assert(err, jc.ErrorIsNil)
return &fixture{
manifold: manifold,
worker: worker,
}
}
// Manifolds returns a set of co-configured manifolds covering the
// various responsibilities of a machine agent.
//
// Thou Shalt Not Use String Literals In This Function. Or Else.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
// connectFilter exists:
// 1) to let us retry api connections immediately on password change,
// rather than causing the dependency engine to wait for a while;
// 2) to ensure that certain connection failures correctly trigger
// complete agent removal. (It's not safe to let any agent other
// than the machine mess around with SetCanUninstall).
connectFilter := func(err error) error {
cause := errors.Cause(err)
if cause == apicaller.ErrConnectImpossible {
err2 := coreagent.SetCanUninstall(config.Agent)
if err2 != nil {
return errors.Trace(err2)
}
return worker.ErrTerminateAgent
} else if cause == apicaller.ErrChangedPassword {
return dependency.ErrBounce
}
return err
}
return dependency.Manifolds{
// The agent manifold references the enclosing agent, and is the
// foundation stone on which most other manifolds ultimately depend.
agentName: agent.Manifold(config.Agent),
// The termination worker returns ErrTerminateAgent if a
// termination signal is received by the process it's running
// in. It has no inputs and its only output is the error it
// returns. It depends on the uninstall file having been
// written *by the manual provider* at install time; it would
// be Very Wrong Indeed to use SetCanUninstall in conjunction
// with this code.
terminationName: terminationworker.Manifold(),
// The stateconfigwatcher manifold watches the machine agent's
// configuration and reports if state serving info is
// present. It will bounce itself if state serving info is
// added or removed. It is intended as a dependency just for
// the state manifold.
stateConfigWatcherName: stateconfigwatcher.Manifold(stateconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
// The state manifold creates a *state.State and makes it
// available to other manifolds. It pings the mongodb session
// regularly and will die if pings fail.
stateName: workerstate.Manifold(workerstate.ManifoldConfig{
AgentName: agentName,
StateConfigWatcherName: stateConfigWatcherName,
OpenState: config.OpenState,
}),
// The stateworkers manifold starts workers which rely on a
// *state.State but which haven't been converted to run
// directly under the dependency engine yet. This manifold
// will be removed once all such workers have been converted;
// until then, the workers are expected to handle their own
// checks for upgrades etc, rather than blocking this whole
// worker on upgrade completion.
stateWorkersName: StateWorkersManifold(StateWorkersConfig{
StateName: stateName,
StartStateWorkers: config.StartStateWorkers,
}),
// The api-config-watcher manifold monitors the API server
// addresses in the agent config and bounces when they
// change. It's required as part of model migrations.
apiConfigWatcherName: apiconfigwatcher.Manifold(apiconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
// The api caller is a thin concurrent wrapper around a connection
// to some API server. It's used by many other manifolds, which all
// select their own desired facades. It will be interesting to see
// how this works when we consolidate the agents; might be best to
// handle the auth changes server-side..?
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
APIConfigWatcherName: apiConfigWatcherName,
APIOpen: apicaller.APIOpen,
NewConnection: apicaller.ScaryConnect,
Filter: connectFilter,
}),
// The upgrade steps gate is used to coordinate workers which
// shouldn't do anything until the upgrade-steps worker has
// finished running any required upgrade steps. The flag of
// similar name is used to implement the isFullyUpgraded func
// that keeps upgrade concerns out of unrelated manifolds.
upgradeStepsGateName: gate.ManifoldEx(config.UpgradeStepsLock),
upgradeStepsFlagName: gate.FlagManifold(gate.FlagManifoldConfig{
GateName: upgradeStepsGateName,
NewWorker: gate.NewFlagWorker,
}),
// The upgrade check gate is used to coordinate workers which
// shouldn't do anything until the upgrader worker has
// completed its first check for a new tools version to
// upgrade to. The flag of similar name is used to implement
// the isFullyUpgraded func that keeps upgrade concerns out of
// unrelated manifolds.
upgradeCheckGateName: gate.ManifoldEx(config.UpgradeCheckLock),
upgradeCheckFlagName: gate.FlagManifold(gate.FlagManifoldConfig{
GateName: upgradeCheckGateName,
NewWorker: gate.NewFlagWorker,
}),
// The upgrader is a leaf worker that returns a specific error
// type recognised by the machine agent, causing other workers
// to be stopped and the agent to be restarted running the new
// tools. We should only need one of these in a consolidated
// agent, but we'll need to be careful about behavioural
// differences, and interactions with the upgrade-steps
// worker.
upgraderName: upgrader.Manifold(upgrader.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
UpgradeCheckGateName: upgradeCheckGateName,
PreviousAgentVersion: config.PreviousAgentVersion,
}),
// The upgradesteps worker runs soon after the machine agent
// starts and runs any steps required to upgrade to the
// running jujud version. Once upgrade steps have run, the
// upgradesteps gate is unlocked and the worker exits.
upgradeStepsName: upgradesteps.Manifold(upgradesteps.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
OpenStateForUpgrade: config.OpenStateForUpgrade,
PreUpgradeSteps: config.PreUpgradeSteps,
}),
// The migration minion handles the agent side aspects of model migrations.
migrationFortressName: ifFullyUpgraded(fortress.Manifold()),
migrationMinionName: ifFullyUpgraded(migrationminion.Manifold(migrationminion.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
FortressName: migrationFortressName,
NewFacade: migrationminion.NewFacade,
NewWorker: migrationminion.NewWorker,
})),
// The serving-info-setter manifold sets grabs the state
// serving info from the API connection and writes it to the
// agent config.
servingInfoSetterName: ifFullyUpgraded(ServingInfoSetterManifold(ServingInfoSetterConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The apiworkers manifold starts workers which rely on the
// machine agent's API connection but have not been converted
// to work directly under the dependency engine. It waits for
// upgrades to be finished before starting these workers.
apiWorkersName: ifFullyUpgraded(APIWorkersManifold(APIWorkersConfig{
APICallerName: apiCallerName,
StartAPIWorkers: config.StartAPIWorkers,
})),
// The reboot manifold manages a worker which will reboot the
// machine when requested. It needs an API connection and
// waits for upgrades to be complete.
rebootName: ifFullyUpgraded(reboot.Manifold(reboot.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The logging config updater is a leaf worker that indirectly
// controls the messages sent via the log sender or rsyslog,
// according to changes in environment config. We should only need
// one of these in a consolidated agent.
loggingConfigUpdaterName: ifFullyUpgraded(logger.Manifold(logger.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The diskmanager worker periodically lists block devices on the
// machine it runs on. This worker will be run on all Juju-managed
// machines (one per machine agent).
diskManagerName: ifFullyUpgraded(diskmanager.Manifold(diskmanager.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The proxy config updater is a leaf worker that sets http/https/apt/etc
// proxy settings.
proxyConfigUpdater: ifFullyUpgraded(proxyupdater.Manifold(proxyupdater.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The api address updater is a leaf worker that rewrites agent config
// as the state server addresses change. We should only need one of
// these in a consolidated agent.
apiAddressUpdaterName: ifFullyUpgraded(apiaddressupdater.Manifold(apiaddressupdater.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The machiner Worker will wait for the identified machine to become
// Dying and make it Dead; or until the machine becomes Dead by other
// means.
machinerName: ifFullyUpgraded(machiner.Manifold(machiner.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The log sender is a leaf worker that sends log messages to some
// API server, when configured so to do. We should only need one of
// these in a consolidated agent.
//
// NOTE: the LogSource will buffer a large number of messages as an upgrade
// runs; it currently seems better to fill the buffer and send when stable,
// optimising for stable controller upgrades rather than up-to-the-moment
// observable normal-machine upgrades.
logSenderName: ifFullyUpgraded(logsender.Manifold(logsender.ManifoldConfig{
APICallerName: apiCallerName,
LogSource: config.LogSource,
})),
// The deployer worker is responsible for deploying and recalling unit
// agents, according to changes in a set of state units; and for the
// final removal of its agents' units from state when they are no
// longer needed.
deployerName: ifFullyUpgraded(deployer.Manifold(deployer.ManifoldConfig{
NewDeployContext: config.NewDeployContext,
AgentName: agentName,
APICallerName: apiCallerName,
})),
authenticationWorkerName: ifFullyUpgraded(authenticationworker.Manifold(authenticationworker.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The storageProvisioner worker manages provisioning
// (deprovisioning), and attachment (detachment) of first-class
// volumes and filesystems.
storageProvisionerName: ifFullyUpgraded(storageprovisioner.MachineManifold(storageprovisioner.MachineManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
Clock: config.Clock,
})),
resumerName: ifFullyUpgraded(resumer.Manifold(resumer.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
identityFileWriterName: ifFullyUpgraded(identityfilewriter.Manifold(identityfilewriter.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
toolsVersionCheckerName: ifFullyUpgraded(toolsversionchecker.Manifold(toolsversionchecker.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
machineActionName: ifFullyUpgraded(machineactions.Manifold(machineactions.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
NewFacade: machineactions.NewFacade,
NewWorker: machineactions.NewMachineActionsWorker,
})),
hostKeyReporterName: ifFullyUpgraded(hostkeyreporter.Manifold(hostkeyreporter.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
RootDir: config.RootDir,
NewFacade: hostkeyreporter.NewFacade,
NewWorker: hostkeyreporter.NewWorker,
})),
}
}
// Manifolds returns a set of co-configured manifolds covering the various
// responsibilities of a standalone unit agent. It also accepts the logSource
// argument because we haven't figured out how to thread all the logging bits
// through a dependency engine yet.
//
// Thou Shalt Not Use String Literals In This Function. Or Else.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
return dependency.Manifolds{
// The agent manifold references the enclosing agent, and is the
// foundation stone on which most other manifolds ultimately depend.
// (Currently, that is "all manifolds", but consider a shared clock.)
AgentName: agent.Manifold(config.Agent),
// The machine lock manifold is a thin concurrent wrapper around an
// FSLock in an agreed location. We expect it to be replaced with an
// in-memory lock when the unit agent moves into the machine agent.
MachineLockName: machinelock.Manifold(machinelock.ManifoldConfig{
AgentName: AgentName,
}),
// The api caller is a thin concurrent wrapper around a connection
// to some API server. It's used by many other manifolds, which all
// select their own desired facades. It will be interesting to see
// how this works when we consolidate the agents; might be best to
// handle the auth changes server-side..?
APICallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: AgentName,
}),
// The log sender is a leaf worker that sends log messages to some
// API server, when configured so to do. We should only need one of
// these in a consolidated agent.
LogSenderName: logsender.Manifold(logsender.ManifoldConfig{
LogSource: config.LogSource,
APICallerName: APICallerName,
}),
// The logging config updater is a leaf worker that indirectly
// controls the messages sent via the log sender or rsyslog,
// according to changes in environment config. We should only need
// one of these in a consolidated agent.
LoggingConfigUpdaterName: logger.Manifold(logger.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
UpgradeWaiterName: util.UpgradeWaitNotRequired,
}),
// The api address updater is a leaf worker that rewrites agent config
// as the controller addresses change. We should only need one of
// these in a consolidated agent.
APIAdddressUpdaterName: apiaddressupdater.Manifold(apiaddressupdater.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
}),
// The proxy config updater is a leaf worker that sets http/https/apt/etc
// proxy settings.
// TODO(fwereade): timing of this is suspicious. There was superstitious
// code trying to run this early; if that ever helped, it was only by
// coincidence. Probably we ought to be making components that might
// need proxy config into explicit dependencies of the proxy updater...
ProxyConfigUpdaterName: proxyupdater.Manifold(proxyupdater.ManifoldConfig{
APICallerName: APICallerName,
}),
// The upgrader is a leaf worker that returns a specific error type
// recognised by the unit agent, causing other workers to be stopped
// and the agent to be restarted running the new tools. We should only
// need one of these in a consolidated agent, but we'll need to be
// careful about behavioural differences, and interactions with the
// upgradesteps worker.
UpgraderName: upgrader.Manifold(upgrader.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
}),
// The leadership tracker attempts to secure and retain leadership of
// the unit's service, and is consulted on such matters by the
// uniter. As it stannds today, we'll need one per unit in a
// consolidated agent.
LeadershipTrackerName: leadership.Manifold(leadership.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
LeadershipGuarantee: config.LeadershipGuarantee,
}),
// The uniter installs charms; manages the unit's presence in its
// relations; creates suboordinate units; runs all the hooks; sends
// metrics; etc etc etc. We expect to break it up further in the
// coming weeks, and to need one per unit in a consolidated agent
// (and probably one for each component broken out).
UniterName: uniter.Manifold(uniter.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
LeadershipTrackerName: LeadershipTrackerName,
MachineLockName: MachineLockName,
CharmDirName: CharmDirName,
}),
// TODO (mattyw) should be added to machine agent.
MetricSpoolName: spool.Manifold(spool.ManifoldConfig{
AgentName: AgentName,
}),
// The charmdir resource coordinates whether the charm directory is
// available or not; after 'start' hook and before 'stop' hook
// executes, and not during upgrades.
CharmDirName: fortress.Manifold(),
// The metric collect worker executes the collect-metrics hook in a
// restricted context that can safely run concurrently with other hooks.
MetricCollectName: collect.Manifold(collect.ManifoldConfig{
AgentName: AgentName,
MetricSpoolName: MetricSpoolName,
CharmDirName: CharmDirName,
}),
// The meter status worker executes the meter-status-changed hook when it detects
// that the meter status has changed.
MeterStatusName: meterstatus.Manifold(meterstatus.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
MachineLockName: MachineLockName,
NewHookRunner: meterstatus.NewHookRunner,
NewMeterStatusAPIClient: msapi.NewClient,
NewConnectedStatusWorker: meterstatus.NewConnectedStatusWorker,
NewIsolatedStatusWorker: meterstatus.NewIsolatedStatusWorker,
}),
// The metric sender worker periodically sends accumulated metrics to the controller.
MetricSenderName: sender.Manifold(sender.ManifoldConfig{
AgentName: AgentName,
APICallerName: APICallerName,
MetricSpoolName: MetricSpoolName,
}),
}
}
// Manifolds returns a set of co-configured manifolds covering the various
// responsibilities of a standalone unit agent. It also accepts the logSource
// argument because we haven't figured out how to thread all the logging bits
// through a dependency engine yet.
//
// Thou Shalt Not Use String Literals In This Function. Or Else.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
// connectFilter exists to let us retry api connections immediately
// on password change, rather than causing the dependency engine to
// wait for a while.
connectFilter := func(err error) error {
cause := errors.Cause(err)
if cause == apicaller.ErrChangedPassword {
return dependency.ErrBounce
} else if cause == apicaller.ErrConnectImpossible {
return worker.ErrTerminateAgent
}
return err
}
return dependency.Manifolds{
// The agent manifold references the enclosing agent, and is the
// foundation stone on which most other manifolds ultimately depend.
// (Currently, that is "all manifolds", but consider a shared clock.)
agentName: agent.Manifold(config.Agent),
// The machine lock manifold is a thin concurrent wrapper around an
// FSLock in an agreed location. We expect it to be replaced with an
// in-memory lock when the unit agent moves into the machine agent.
machineLockName: machinelock.Manifold(machinelock.ManifoldConfig{
AgentName: agentName,
}),
// The api-config-watcher manifold monitors the API server
// addresses in the agent config and bounces when they
// change. It's required as part of model migrations.
apiConfigWatcherName: apiconfigwatcher.Manifold(apiconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
// The api caller is a thin concurrent wrapper around a connection
// to some API server. It's used by many other manifolds, which all
// select their own desired facades. It will be interesting to see
// how this works when we consolidate the agents; might be best to
// handle the auth changes server-side..?
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
APIConfigWatcherName: apiConfigWatcherName,
APIOpen: apicaller.APIOpen,
NewConnection: apicaller.ScaryConnect,
Filter: connectFilter,
}),
// The log sender is a leaf worker that sends log messages to some
// API server, when configured so to do. We should only need one of
// these in a consolidated agent.
logSenderName: logsender.Manifold(logsender.ManifoldConfig{
APICallerName: apiCallerName,
LogSource: config.LogSource,
}),
// The upgrader is a leaf worker that returns a specific error type
// recognised by the unit agent, causing other workers to be stopped
// and the agent to be restarted running the new tools. We should only
// need one of these in a consolidated agent, but we'll need to be
// careful about behavioural differences, and interactions with the
// upgradesteps worker.
upgraderName: upgrader.Manifold(upgrader.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
}),
migrationFortressName: fortress.Manifold(),
// The migration minion handles the agent side aspects of model migrations.
migrationMinionName: migrationminion.Manifold(migrationminion.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
FortressName: migrationFortressName,
NewFacade: migrationminion.NewFacade,
NewWorker: migrationminion.NewWorker,
}),
// The logging config updater is a leaf worker that indirectly
// controls the messages sent via the log sender according to
// changes in environment config. We should only need one of
// these in a consolidated agent.
loggingConfigUpdaterName: logger.Manifold(logger.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
}),
// The api address updater is a leaf worker that rewrites agent config
// as the controller addresses change. We should only need one of
// these in a consolidated agent.
apiAddressUpdaterName: apiaddressupdater.Manifold(apiaddressupdater.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
}),
// The proxy config updater is a leaf worker that sets http/https/apt/etc
// proxy settings.
// TODO(fwereade): timing of this is suspicious. There was superstitious
// code trying to run this early; if that ever helped, it was only by
// coincidence. Probably we ought to be making components that might
// need proxy config into explicit dependencies of the proxy updater...
proxyConfigUpdaterName: proxyupdater.Manifold(proxyupdater.ManifoldConfig{
APICallerName: apiCallerName,
}),
// The charmdir resource coordinates whether the charm directory is
// available or not; after 'start' hook and before 'stop' hook
// executes, and not during upgrades.
charmDirName: fortress.Manifold(),
// The leadership tracker attempts to secure and retain leadership of
// the unit's service, and is consulted on such matters by the
// uniter. As it stannds today, we'll need one per unit in a
// consolidated agent.
leadershipTrackerName: leadership.Manifold(leadership.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
LeadershipGuarantee: config.LeadershipGuarantee,
}),
// HookRetryStrategy uses a retrystrategy worker to get a
// retry strategy that will be used by the uniter to run its hooks.
hookRetryStrategyName: retrystrategy.Manifold(retrystrategy.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
NewFacade: retrystrategy.NewFacade,
NewWorker: retrystrategy.NewRetryStrategyWorker,
}),
// The uniter installs charms; manages the unit's presence in its
// relations; creates suboordinate units; runs all the hooks; sends
// metrics; etc etc etc. We expect to break it up further in the
// coming weeks, and to need one per unit in a consolidated agent
// (and probably one for each component broken out).
uniterName: uniter.Manifold(uniter.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
LeadershipTrackerName: leadershipTrackerName,
MachineLockName: machineLockName,
CharmDirName: charmDirName,
HookRetryStrategyName: hookRetryStrategyName,
}),
// TODO (mattyw) should be added to machine agent.
metricSpoolName: spool.Manifold(spool.ManifoldConfig{
AgentName: agentName,
}),
// The metric collect worker executes the collect-metrics hook in a
// restricted context that can safely run concurrently with other hooks.
metricCollectName: collect.Manifold(collect.ManifoldConfig{
AgentName: agentName,
MetricSpoolName: metricSpoolName,
CharmDirName: charmDirName,
}),
// The meter status worker executes the meter-status-changed hook when it detects
// that the meter status has changed.
meterStatusName: meterstatus.Manifold(meterstatus.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
MachineLockName: machineLockName,
NewHookRunner: meterstatus.NewHookRunner,
NewMeterStatusAPIClient: msapi.NewClient,
NewConnectedStatusWorker: meterstatus.NewConnectedStatusWorker,
NewIsolatedStatusWorker: meterstatus.NewIsolatedStatusWorker,
}),
// The metric sender worker periodically sends accumulated metrics to the controller.
metricSenderName: sender.Manifold(sender.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
MetricSpoolName: metricSpoolName,
}),
}
}
// Manifolds returns a set of interdependent dependency manifolds that will
// run together to administer a model, as configured.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
modelTag := config.Agent.CurrentConfig().Model()
return dependency.Manifolds{
// The first group are foundational; the agent and clock
// which wrap those supplied in config, and the api-caller
// through which everything else communicates with the
// controller.
agentName: agent.Manifold(config.Agent),
clockName: clockManifold(config.Clock),
apiConfigWatcherName: apiconfigwatcher.Manifold(apiconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
APIOpen: apicaller.APIOpen,
NewConnection: apicaller.OnlyConnect,
}),
// The spaces-imported gate will be unlocked when space
// discovery is known to be complete. Various manifolds
// should also come to depend upon it (or rather, on a
// Flag depending on it) in the future.
spacesImportedGateName: gate.ManifoldEx(config.SpacesImportedGate),
// All other manifolds should depend on at least one of these
// three, which handle all the tasks that are safe and sane
// to run in *all* controller machines.
notDeadFlagName: lifeflag.Manifold(lifeflag.ManifoldConfig{
APICallerName: apiCallerName,
Entity: modelTag,
Result: life.IsNotDead,
Filter: lifeFilter,
NewFacade: lifeflag.NewFacade,
NewWorker: lifeflag.NewWorker,
}),
notAliveFlagName: lifeflag.Manifold(lifeflag.ManifoldConfig{
APICallerName: apiCallerName,
Entity: modelTag,
Result: life.IsNotAlive,
Filter: lifeFilter,
NewFacade: lifeflag.NewFacade,
NewWorker: lifeflag.NewWorker,
}),
isResponsibleFlagName: singular.Manifold(singular.ManifoldConfig{
ClockName: clockName,
AgentName: agentName,
APICallerName: apiCallerName,
Duration: config.RunFlagDuration,
NewFacade: singular.NewFacade,
NewWorker: singular.NewWorker,
}),
migrationFortressName: ifNotDead(fortress.Manifold()),
migrationMasterName: ifNotDead(migrationmaster.Manifold(migrationmaster.ManifoldConfig{
APICallerName: apiCallerName,
FortressName: migrationFortressName,
NewFacade: migrationmaster.NewFacade,
NewWorker: migrationmaster.NewWorker,
})),
// Everything else should be wrapped in ifResponsible,
// ifNotAlive, or ifNotDead, to ensure that only a single
// controller is administering this model at a time.
//
// NOTE: not perfectly reliable at this stage? i.e. a worker
// that ignores its stop signal for "too long" might continue
// to take admin actions after the window of responsibility
// closes. This *is* a pre-existing problem, but demands some
// thought/care: e.g. should we make sure the apiserver also
// closes any connections that lose responsibility..? can we
// make sure all possible environ operations are either time-
// bounded or interruptible? etc
//
// On the other hand, all workers *should* be written in the
// expectation of dealing with a sucky infrastructure running
// things in parallel unexpectedly, just because the universe
// hates us and will engineer matters such that it happens
// sometimes, even when we try to avoid it.
// The environ tracker could/should be used by several other
// workers (firewaller, provisioners, address-cleaner?).
environTrackerName: ifResponsible(environ.Manifold(environ.ManifoldConfig{
APICallerName: apiCallerName,
NewEnvironFunc: environs.New,
})),
// The undertaker is currently the only ifNotAlive worker.
undertakerName: ifNotAlive(undertaker.Manifold(undertaker.ManifoldConfig{
APICallerName: apiCallerName,
EnvironName: environTrackerName,
NewFacade: undertaker.NewFacade,
NewWorker: undertaker.NewWorker,
})),
// All the rest depend on ifNotDead.
spaceImporterName: ifNotDead(discoverspaces.Manifold(discoverspaces.ManifoldConfig{
EnvironName: environTrackerName,
APICallerName: apiCallerName,
UnlockerName: spacesImportedGateName,
NewFacade: discoverspaces.NewFacade,
NewWorker: discoverspaces.NewWorker,
})),
computeProvisionerName: ifNotDead(provisioner.Manifold(provisioner.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
storageProvisionerName: ifNotDead(storageprovisioner.ModelManifold(storageprovisioner.ModelManifoldConfig{
APICallerName: apiCallerName,
ClockName: clockName,
Scope: modelTag,
})),
firewallerName: ifNotDead(firewaller.Manifold(firewaller.ManifoldConfig{
APICallerName: apiCallerName,
})),
unitAssignerName: ifNotDead(unitassigner.Manifold(unitassigner.ManifoldConfig{
APICallerName: apiCallerName,
})),
serviceScalerName: ifNotDead(servicescaler.Manifold(servicescaler.ManifoldConfig{
APICallerName: apiCallerName,
NewFacade: servicescaler.NewFacade,
NewWorker: servicescaler.New,
})),
instancePollerName: ifNotDead(instancepoller.Manifold(instancepoller.ManifoldConfig{
APICallerName: apiCallerName,
EnvironName: environTrackerName,
})),
charmRevisionUpdaterName: ifNotDead(charmrevisionmanifold.Manifold(charmrevisionmanifold.ManifoldConfig{
APICallerName: apiCallerName,
ClockName: clockName,
Period: config.CharmRevisionUpdateInterval,
NewFacade: charmrevisionmanifold.NewAPIFacade,
NewWorker: charmrevision.NewWorker,
})),
metricWorkerName: ifNotDead(metricworker.Manifold(metricworker.ManifoldConfig{
APICallerName: apiCallerName,
})),
stateCleanerName: ifNotDead(cleaner.Manifold(cleaner.ManifoldConfig{
APICallerName: apiCallerName,
})),
addressCleanerName: ifNotDead(addresser.Manifold(addresser.ManifoldConfig{
APICallerName: apiCallerName,
})),
statusHistoryPrunerName: ifNotDead(statushistorypruner.Manifold(statushistorypruner.ManifoldConfig{
APICallerName: apiCallerName,
MaxLogsPerEntity: config.EntityStatusHistoryCount,
PruneInterval: config.EntityStatusHistoryInterval,
// TODO(fwereade): 2016-03-17 lp:1558657
NewTimer: worker.NewTimer,
})),
}
}
// Manifolds returns a set of interdependent dependency manifolds that will
// run together to administer a model, as configured.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
modelTag := config.Agent.CurrentConfig().Model()
return dependency.Manifolds{
// The first group are foundational; the agent and clock
// which wrap those supplied in config, and the api-caller
// through which everything else communicates with the
// controller.
agentName: agent.Manifold(config.Agent),
clockName: clockManifold(config.Clock),
apiConfigWatcherName: apiconfigwatcher.Manifold(apiconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
APIOpen: api.Open,
NewConnection: apicaller.OnlyConnect,
Filter: apiConnectFilter,
}),
// The spaces-imported gate will be unlocked when space
// discovery is known to be complete. Various manifolds
// should also come to depend upon it (or rather, on a
// Flag depending on it) in the future.
spacesImportedGateName: gate.ManifoldEx(config.SpacesImportedGate),
// All other manifolds should depend on at least one of these
// three, which handle all the tasks that are safe and sane
// to run in *all* controller machines.
notDeadFlagName: lifeflag.Manifold(lifeflag.ManifoldConfig{
APICallerName: apiCallerName,
Entity: modelTag,
Result: life.IsNotDead,
Filter: LifeFilter,
NewFacade: lifeflag.NewFacade,
NewWorker: lifeflag.NewWorker,
}),
notAliveFlagName: lifeflag.Manifold(lifeflag.ManifoldConfig{
APICallerName: apiCallerName,
Entity: modelTag,
Result: life.IsNotAlive,
Filter: LifeFilter,
NewFacade: lifeflag.NewFacade,
NewWorker: lifeflag.NewWorker,
}),
isResponsibleFlagName: singular.Manifold(singular.ManifoldConfig{
ClockName: clockName,
AgentName: agentName,
APICallerName: apiCallerName,
Duration: config.RunFlagDuration,
NewFacade: singular.NewFacade,
NewWorker: singular.NewWorker,
}),
// The migration workers collaborate to run migrations;
// and to create a mechanism for running other workers
// so they can't accidentally interfere with a migration
// in progress. Such a manifold should (1) depend on the
// migration-inactive flag, to know when to start or die;
// and (2) occupy the migration-fortress, so as to avoid
// possible interference with the minion (which will not
// take action until it's gained sole control of the
// fortress).
//
// Note that the fortress and flag will only exist while
// the model is not dead; this frees their dependencies
// from model-lifetime concerns.
migrationFortressName: ifNotDead(fortress.Manifold()),
migrationInactiveFlagName: ifNotDead(migrationflag.Manifold(migrationflag.ManifoldConfig{
APICallerName: apiCallerName,
Check: migrationflag.IsTerminal,
NewFacade: migrationflag.NewFacade,
NewWorker: migrationflag.NewWorker,
})),
migrationMasterName: ifNotDead(migrationmaster.Manifold(migrationmaster.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
FortressName: migrationFortressName,
Clock: config.Clock,
NewFacade: migrationmaster.NewFacade,
NewWorker: config.NewMigrationMaster,
})),
// Everything else should be wrapped in ifResponsible,
// ifNotAlive, ifNotDead, or ifNotMigrating (which also
// implies NotDead), to ensure that only a single
// controller is attempting to administer this model at
// any one time.
//
// NOTE: not perfectly reliable at this stage? i.e. a
// worker that ignores its stop signal for "too long"
// might continue to take admin actions after the window
// of responsibility closes. This *is* a pre-existing
// problem, but demands some thought/care: e.g. should
// we make sure the apiserver also closes any
// connections that lose responsibility..? can we make
// sure all possible environ operations are either time-
// bounded or interruptible? etc
//
// On the other hand, all workers *should* be written in
// the expectation of dealing with sucky infrastructure
// running things in parallel unexpectedly, just because
// the universe hates us and will engineer matters such
// that it happens sometimes, even when we try to avoid
// it.
// The environ tracker could/should be used by several other
// workers (firewaller, provisioners, address-cleaner?).
environTrackerName: ifResponsible(environ.Manifold(environ.ManifoldConfig{
APICallerName: apiCallerName,
NewEnvironFunc: config.NewEnvironFunc,
})),
// The undertaker is currently the only ifNotAlive worker.
undertakerName: ifNotAlive(undertaker.Manifold(undertaker.ManifoldConfig{
APICallerName: apiCallerName,
EnvironName: environTrackerName,
NewFacade: undertaker.NewFacade,
NewWorker: undertaker.NewWorker,
})),
// All the rest depend on ifNotMigrating.
spaceImporterName: ifNotMigrating(discoverspaces.Manifold(discoverspaces.ManifoldConfig{
EnvironName: environTrackerName,
APICallerName: apiCallerName,
UnlockerName: spacesImportedGateName,
NewFacade: discoverspaces.NewFacade,
NewWorker: discoverspaces.NewWorker,
})),
computeProvisionerName: ifNotMigrating(provisioner.Manifold(provisioner.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
EnvironName: environTrackerName,
NewProvisionerFunc: provisioner.NewEnvironProvisioner,
})),
storageProvisionerName: ifNotMigrating(storageprovisioner.ModelManifold(storageprovisioner.ModelManifoldConfig{
APICallerName: apiCallerName,
ClockName: clockName,
EnvironName: environTrackerName,
Scope: modelTag,
})),
firewallerName: ifNotMigrating(firewaller.Manifold(firewaller.ManifoldConfig{
APICallerName: apiCallerName,
})),
unitAssignerName: ifNotMigrating(unitassigner.Manifold(unitassigner.ManifoldConfig{
APICallerName: apiCallerName,
})),
applicationScalerName: ifNotMigrating(applicationscaler.Manifold(applicationscaler.ManifoldConfig{
APICallerName: apiCallerName,
NewFacade: applicationscaler.NewFacade,
NewWorker: applicationscaler.New,
})),
instancePollerName: ifNotMigrating(instancepoller.Manifold(instancepoller.ManifoldConfig{
APICallerName: apiCallerName,
EnvironName: environTrackerName,
ClockName: clockName,
Delay: config.InstPollerAggregationDelay,
})),
charmRevisionUpdaterName: ifNotMigrating(charmrevisionmanifold.Manifold(charmrevisionmanifold.ManifoldConfig{
APICallerName: apiCallerName,
ClockName: clockName,
Period: config.CharmRevisionUpdateInterval,
NewFacade: charmrevisionmanifold.NewAPIFacade,
NewWorker: charmrevision.NewWorker,
})),
metricWorkerName: ifNotMigrating(metricworker.Manifold(metricworker.ManifoldConfig{
APICallerName: apiCallerName,
})),
stateCleanerName: ifNotMigrating(cleaner.Manifold(cleaner.ManifoldConfig{
APICallerName: apiCallerName,
})),
statusHistoryPrunerName: ifNotMigrating(statushistorypruner.Manifold(statushistorypruner.ManifoldConfig{
APICallerName: apiCallerName,
MaxHistoryTime: config.StatusHistoryPrunerMaxHistoryTime,
MaxHistoryMB: config.StatusHistoryPrunerMaxHistoryMB,
PruneInterval: config.StatusHistoryPrunerInterval,
// TODO(fwereade): 2016-03-17 lp:1558657
NewTimer: worker.NewTimer,
})),
machineUndertakerName: ifNotMigrating(machineundertaker.Manifold(machineundertaker.ManifoldConfig{
APICallerName: apiCallerName,
EnvironName: environTrackerName,
NewWorker: machineundertaker.NewWorker,
})),
}
}