func TestMdnsDiscovery(t *testing.T) {
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
a := bhost.New(netutil.GenSwarmNetwork(t, ctx))
b := bhost.New(netutil.GenSwarmNetwork(t, ctx))
sa, err := NewMdnsService(ctx, a, time.Second)
if err != nil {
t.Fatal(err)
}
sb, err := NewMdnsService(ctx, b, time.Second)
if err != nil {
t.Fatal(err)
}
_ = sb
n := &DiscoveryNotifee{a}
sa.RegisterNotifee(n)
time.Sleep(time.Second * 2)
err = a.Connect(ctx, pstore.PeerInfo{ID: b.ID()})
if err != nil {
t.Fatal(err)
}
}
// TestReconnect tests whether hosts are able to disconnect and reconnect.
func TestReconnect2(t *testing.T) {
ctx := context.Background()
h1 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
h2 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
hosts := []host.Host{h1, h2}
h1.SetStreamHandler(protocol.TestingID, EchoStreamHandler)
h2.SetStreamHandler(protocol.TestingID, EchoStreamHandler)
rounds := 8
if testing.Short() {
rounds = 4
}
for i := 0; i < rounds; i++ {
log.Debugf("TestReconnect: %d/%d\n", i, rounds)
SubtestConnSendDisc(t, hosts)
}
}
func TestPing(t *testing.T) {
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
h1 := bhost.New(netutil.GenSwarmNetwork(t, ctx))
h2 := bhost.New(netutil.GenSwarmNetwork(t, ctx))
err := h1.Connect(ctx, pstore.PeerInfo{
ID: h2.ID(),
Addrs: h2.Addrs(),
})
if err != nil {
t.Fatal(err)
}
ps1 := NewPingService(h1)
ps2 := NewPingService(h2)
testPing(t, ps1, h2.ID())
testPing(t, ps2, h1.ID())
}
func (mn *mocknet) AddPeerWithPeerstore(p peer.ID, ps pstore.Peerstore) (host.Host, error) {
n, err := newPeernet(mn.ctx, mn, p, ps)
if err != nil {
return nil, err
}
h := bhost.New(n)
mn.proc.AddChild(n.proc)
mn.Lock()
mn.nets[n.peer] = n
mn.hosts[n.peer] = h
mn.Unlock()
return h, nil
}
// create a 'Host' with a random peer to listen on the given address
func makeBasicHost(listen string, secio bool) (host.Host, error) {
addr, err := ma.NewMultiaddr(listen)
if err != nil {
return nil, err
}
ps := pstore.NewPeerstore()
var pid peer.ID
if secio {
ident, err := testutil.RandIdentity()
if err != nil {
return nil, err
}
ident.PrivateKey()
ps.AddPrivKey(ident.ID(), ident.PrivateKey())
ps.AddPubKey(ident.ID(), ident.PublicKey())
pid = ident.ID()
} else {
fakepid, err := testutil.RandPeerID()
if err != nil {
return nil, err
}
pid = fakepid
}
ctx := context.Background()
// create a new swarm to be used by the service host
netw, err := swarm.NewNetwork(ctx, []ma.Multiaddr{addr}, pid, ps, nil)
if err != nil {
return nil, err
}
log.Printf("I am %s/ipfs/%s\n", addr, pid.Pretty())
return bhost.New(netw), nil
}
// TestBackpressureStreamHandler tests whether mux handler
// ratelimiting works. Meaning, since the handler is sequential
// it should block senders.
//
// Important note: spdystream (which peerstream uses) has a set
// of n workers (n=spdsystream.FRAME_WORKERS) which handle new
// frames, including those starting new streams. So all of them
// can be in the handler at one time. Also, the sending side
// does not rate limit unless we call stream.Wait()
//
//
// Note: right now, this happens muxer-wide. the muxer should
// learn to flow control, so handlers cant block each other.
func TestBackpressureStreamHandler(t *testing.T) {
t.Skip(`Sadly, as cool as this test is, it doesn't work
Because spdystream doesnt handle stream open backpressure
well IMO. I'll see about rewriting that part when it becomes
a problem.
`)
// a number of concurrent request handlers
limit := 10
// our way to signal that we're done with 1 request
requestHandled := make(chan struct{})
// handler rate limiting
receiverRatelimit := make(chan struct{}, limit)
for i := 0; i < limit; i++ {
receiverRatelimit <- struct{}{}
}
// sender counter of successfully opened streams
senderOpened := make(chan struct{}, limit*100)
// sender signals it's done (errored out)
senderDone := make(chan struct{})
// the receiver handles requests with some rate limiting
receiver := func(s inet.Stream) {
log.Debug("receiver received a stream")
<-receiverRatelimit // acquire
go func() {
// our request handler. can do stuff here. we
// simulate something taking time by waiting
// on requestHandled
log.Debug("request worker handling...")
<-requestHandled
log.Debug("request worker done!")
receiverRatelimit <- struct{}{} // release
}()
}
// the sender opens streams as fast as possible
sender := func(host host.Host, remote peer.ID) {
var s inet.Stream
var err error
defer func() {
t.Error(err)
log.Debug("sender error. exiting.")
senderDone <- struct{}{}
}()
for {
s, err = host.NewStream(context.Background(), remote, protocol.TestingID)
if err != nil {
return
}
_ = s
// if err = s.SwarmStream().Stream().Wait(); err != nil {
// return
// }
// "count" another successfully opened stream
// (large buffer so shouldn't block in normal operation)
log.Debug("sender opened another stream!")
senderOpened <- struct{}{}
}
}
// count our senderOpened events
countStreamsOpenedBySender := func(min int) int {
opened := 0
for opened < min {
log.Debugf("countStreamsOpenedBySender got %d (min %d)", opened, min)
select {
case <-senderOpened:
opened++
case <-time.After(10 * time.Millisecond):
}
}
return opened
}
// count our received events
// waitForNReceivedStreams := func(n int) {
// for n > 0 {
// log.Debugf("waiting for %d received streams...", n)
// select {
// case <-receiverRatelimit:
// n--
// }
// }
// }
testStreamsOpened := func(expected int) {
log.Debugf("testing rate limited to %d streams", expected)
if n := countStreamsOpenedBySender(expected); n != expected {
t.Fatalf("rate limiting did not work :( -- %d != %d", expected, n)
}
}
// ok that's enough setup. let's do it!
ctx := context.Background()
h1 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
h2 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
// setup receiver handler
h1.SetStreamHandler(protocol.TestingID, receiver)
h2pi := h2.Peerstore().PeerInfo(h2.ID())
log.Debugf("dialing %s", h2pi.Addrs)
if err := h1.Connect(ctx, h2pi); err != nil {
t.Fatalf("Failed to connect:", err)
}
// launch sender!
go sender(h2, h1.ID())
// ok, what do we expect to happen? the receiver should
// receive 10 requests and stop receiving, blocking the sender.
// we can test this by counting 10x senderOpened requests
<-senderOpened // wait for the sender to successfully open some.
testStreamsOpened(limit - 1)
// let's "handle" 3 requests.
<-requestHandled
<-requestHandled
<-requestHandled
// the sender should've now been able to open exactly 3 more.
testStreamsOpened(3)
// shouldn't have opened anything more
testStreamsOpened(0)
// let's "handle" 100 requests in batches of 5
for i := 0; i < 20; i++ {
<-requestHandled
<-requestHandled
<-requestHandled
<-requestHandled
<-requestHandled
testStreamsOpened(5)
}
// success!
// now for the sugar on top: let's tear down the receiver. it should
// exit the sender.
h1.Close()
// shouldn't have opened anything more
testStreamsOpened(0)
select {
case <-time.After(100 * time.Millisecond):
t.Error("receiver shutdown failed to exit sender")
case <-senderDone:
log.Info("handler backpressure works!")
}
}
// TestStBackpressureStreamWrite tests whether streams see proper
// backpressure when writing data over the network streams.
func TestStBackpressureStreamWrite(t *testing.T) {
// senderWrote signals that the sender wrote bytes to remote.
// the value is the count of bytes written.
senderWrote := make(chan int, 10000)
// sender signals it's done (errored out)
senderDone := make(chan struct{})
// writeStats lets us listen to all the writes and return
// how many happened and how much was written
writeStats := func() (int, int) {
writes := 0
bytes := 0
for {
select {
case n := <-senderWrote:
writes++
bytes = bytes + n
default:
log.Debugf("stats: sender wrote %d bytes, %d writes", bytes, writes)
return bytes, writes
}
}
}
// sender attempts to write as fast as possible, signaling on the
// completion of every write. This makes it possible to see how
// fast it's actually writing. We pair this with a receiver
// that waits for a signal to read.
sender := func(s inet.Stream) {
defer func() {
s.Close()
senderDone <- struct{}{}
}()
// ready a buffer of random data
buf := make([]byte, 65536)
u.NewTimeSeededRand().Read(buf)
for {
// send a randomly sized subchunk
from := rand.Intn(len(buf) / 2)
to := rand.Intn(len(buf) / 2)
sendbuf := buf[from : from+to]
n, err := s.Write(sendbuf)
if err != nil {
log.Debug("sender error. exiting:", err)
return
}
log.Debugf("sender wrote %d bytes", n)
senderWrote <- n
}
}
// receive a number of bytes from a stream.
// returns the number of bytes written.
receive := func(s inet.Stream, expect int) {
log.Debugf("receiver to read %d bytes", expect)
rbuf := make([]byte, expect)
n, err := io.ReadFull(s, rbuf)
if err != nil {
t.Error("read failed:", err)
}
if expect != n {
t.Error("read len differs: %d != %d", expect, n)
}
}
// ok let's do it!
// setup the networks
ctx := context.Background()
h1 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
h2 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
// setup sender handler on 1
h1.SetStreamHandler(protocol.TestingID, sender)
h2pi := h2.Peerstore().PeerInfo(h2.ID())
log.Debugf("dialing %s", h2pi.Addrs)
if err := h1.Connect(ctx, h2pi); err != nil {
t.Fatalf("Failed to connect:", err)
}
// open a stream, from 2->1, this is our reader
s, err := h2.NewStream(context.Background(), h1.ID(), protocol.TestingID)
if err != nil {
t.Fatal(err)
}
// let's make sure r/w works.
testSenderWrote := func(bytesE int) {
bytesA, writesA := writeStats()
if bytesA != bytesE {
t.Errorf("numbers failed: %d =?= %d bytes, via %d writes", bytesA, bytesE, writesA)
}
}
// trigger lazy connection handshaking
_, err = s.Read(nil)
if err != nil {
t.Fatal(err)
}
// 500ms rounds of lockstep write + drain
roundsStart := time.Now()
roundsTotal := 0
for roundsTotal < (2 << 20) {
// let the sender fill its buffers, it will stop sending.
<-time.After(300 * time.Millisecond)
b, _ := writeStats()
testSenderWrote(0)
testSenderWrote(0)
// drain it all, wait again
receive(s, b)
roundsTotal = roundsTotal + b
}
roundsTime := time.Since(roundsStart)
// now read continously, while we measure stats.
stop := make(chan struct{})
contStart := time.Now()
go func() {
for {
select {
case <-stop:
return
default:
receive(s, 2<<15)
}
}
}()
contTotal := 0
for contTotal < (2 << 20) {
n := <-senderWrote
contTotal += n
}
stop <- struct{}{}
contTime := time.Since(contStart)
// now compare! continuous should've been faster AND larger
if roundsTime < contTime {
t.Error("continuous should have been faster")
}
if roundsTotal < contTotal {
t.Error("continuous should have been larger, too!")
}
// and a couple rounds more for good measure ;)
for i := 0; i < 3; i++ {
// let the sender fill its buffers, it will stop sending.
<-time.After(300 * time.Millisecond)
b, _ := writeStats()
testSenderWrote(0)
testSenderWrote(0)
// drain it all, wait again
receive(s, b)
}
// this doesn't work :(:
// // now for the sugar on top: let's tear down the receiver. it should
// // exit the sender.
// n1.Close()
// testSenderWrote(0)
// testSenderWrote(0)
// select {
// case <-time.After(2 * time.Second):
// t.Error("receiver shutdown failed to exit sender")
// case <-senderDone:
// log.Info("handler backpressure works!")
// }
}
func TestRelayStress(t *testing.T) {
buflen := 1 << 18
iterations := 10
ctx := context.Background()
// these networks have the relay service wired in already.
n1 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n2 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n3 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n1p := n1.ID()
n2p := n2.ID()
n3p := n3.ID()
n2pi := n2.Peerstore().PeerInfo(n2p)
if err := n1.Connect(ctx, n2pi); err != nil {
t.Fatalf("Failed to dial:", err)
}
if err := n3.Connect(ctx, n2pi); err != nil {
t.Fatalf("Failed to dial:", err)
}
// setup handler on n3 to copy everything over to the pipe.
piper, pipew := io.Pipe()
n3.SetStreamHandler(protocol.TestingID, func(s inet.Stream) {
log.Debug("relay stream opened to n3!")
log.Debug("piping and echoing everything")
w := io.MultiWriter(s, pipew)
io.Copy(w, s)
log.Debug("closing stream")
s.Close()
})
// ok, now we can try to relay n1--->n2--->n3.
log.Debug("open relay stream")
s, err := n1.NewStream(ctx, n2p, relay.ID)
if err != nil {
t.Fatal(err)
}
// ok first thing we write the relay header n1->n3
log.Debug("write relay header")
if err := relay.WriteHeader(s, n1p, n3p); err != nil {
t.Fatal(err)
}
// ok now the header's there, we can write the next protocol header.
log.Debug("write testing header")
if err := msmux.SelectProtoOrFail(string(protocol.TestingID), s); err != nil {
t.Fatal(err)
}
// okay, now write lots of text and read it back out from both
// the pipe and the stream.
buf1 := make([]byte, buflen)
buf2 := make([]byte, len(buf1))
buf3 := make([]byte, len(buf1))
fillbuf := func(buf []byte, b byte) {
for i := range buf {
buf[i] = b
}
}
for i := 0; i < iterations; i++ {
fillbuf(buf1, byte(int('a')+i))
log.Debugf("writing %d bytes (%d/%d)", len(buf1), i, iterations)
if _, err := s.Write(buf1); err != nil {
t.Fatal(err)
}
log.Debug("read it out from the pipe.")
if _, err := io.ReadFull(piper, buf2); err != nil {
t.Fatal(err)
}
if string(buf1) != string(buf2) {
t.Fatal("should've gotten that text out of the pipe")
}
// read it out from the stream (echoed)
log.Debug("read it out from the stream (echoed).")
if _, err := io.ReadFull(s, buf3); err != nil {
t.Fatal(err)
}
if string(buf1) != string(buf3) {
t.Fatal("should've gotten that text out of the stream")
}
}
log.Debug("sweet, relay works under stress.")
s.Close()
}
func TestRelaySimple(t *testing.T) {
ctx := context.Background()
// these networks have the relay service wired in already.
n1 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n2 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n3 := bhost.New(testutil.GenSwarmNetwork(t, ctx))
n1p := n1.ID()
n2p := n2.ID()
n3p := n3.ID()
n2pi := n2.Peerstore().PeerInfo(n2p)
if err := n1.Connect(ctx, n2pi); err != nil {
t.Fatal("Failed to connect:", err)
}
if err := n3.Connect(ctx, n2pi); err != nil {
t.Fatal("Failed to connect:", err)
}
// setup handler on n3 to copy everything over to the pipe.
piper, pipew := io.Pipe()
n3.SetStreamHandler(protocol.TestingID, func(s inet.Stream) {
log.Debug("relay stream opened to n3!")
log.Debug("piping and echoing everything")
w := io.MultiWriter(s, pipew)
io.Copy(w, s)
log.Debug("closing stream")
s.Close()
})
// ok, now we can try to relay n1--->n2--->n3.
log.Debug("open relay stream")
s, err := n1.NewStream(ctx, n2p, relay.ID)
if err != nil {
t.Fatal(err)
}
// ok first thing we write the relay header n1->n3
log.Debug("write relay header")
if err := relay.WriteHeader(s, n1p, n3p); err != nil {
t.Fatal(err)
}
// ok now the header's there, we can write the next protocol header.
log.Debug("write testing header")
if err := msmux.SelectProtoOrFail(string(protocol.TestingID), s); err != nil {
t.Fatal(err)
}
// okay, now we should be able to write text, and read it out.
buf1 := []byte("abcdefghij")
buf2 := make([]byte, 10)
buf3 := make([]byte, 10)
log.Debug("write in some text.")
if _, err := s.Write(buf1); err != nil {
t.Fatal(err)
}
// read it out from the pipe.
log.Debug("read it out from the pipe.")
if _, err := io.ReadFull(piper, buf2); err != nil {
t.Fatal(err)
}
if string(buf1) != string(buf2) {
t.Fatal("should've gotten that text out of the pipe")
}
// read it out from the stream (echoed)
log.Debug("read it out from the stream (echoed).")
if _, err := io.ReadFull(s, buf3); err != nil {
t.Fatal(err)
}
if string(buf1) != string(buf3) {
t.Fatal("should've gotten that text out of the stream")
}
// sweet. relay works.
log.Debug("sweet, relay works.")
s.Close()
}
func GenHostSwarm(t *testing.T, ctx context.Context) *bhost.BasicHost {
n := GenSwarmNetwork(t, ctx)
return bhost.New(n)
}