// Run executes a Packer build and returns a packer.Artifact representing
// a VirtualBox appliance.
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with VirtualBox
	driver, err := vboxcommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating VirtualBox driver: %s", err)
	}

	// Set up the state.
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("driver", driver)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Build the steps.
	steps := []multistep.Step{
		&vboxcommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		new(vboxcommon.StepSuppressMessages),
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		&StepImport{
			Name:       b.config.VMName,
			SourcePath: b.config.SourcePath,
		},
		/*
			new(stepAttachGuestAdditions),
		*/
		new(vboxcommon.StepAttachFloppy),
		&vboxcommon.StepForwardSSH{
			GuestPort:   b.config.SSHPort,
			HostPortMin: b.config.SSHHostPortMin,
			HostPortMax: b.config.SSHHostPortMax,
		},
		&vboxcommon.StepVBoxManage{
			Commands: b.config.VBoxManage,
			Tpl:      b.config.tpl,
		},
		&vboxcommon.StepRun{
			BootWait: b.config.BootWait,
			Headless: b.config.Headless,
		},
		&common.StepConnectSSH{
			SSHAddress:     vboxcommon.SSHAddress,
			SSHConfig:      vboxcommon.SSHConfigFunc(b.config.SSHConfig),
			SSHWaitTimeout: b.config.SSHWaitTimeout,
		},
		&vboxcommon.StepUploadVersion{
			Path: b.config.VBoxVersionFile,
		},
		/*
			new(stepUploadGuestAdditions),
		*/
		new(common.StepProvision),
		&vboxcommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
		},
		new(vboxcommon.StepRemoveDevices),
		&vboxcommon.StepExport{
			Format:    b.config.Format,
			OutputDir: b.config.OutputDir,
		},
	}

	// Run the steps.
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}
	b.runner.Run(state)

	// Report any errors.
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return vboxcommon.NewArtifact(b.config.OutputDir)
}
Beispiel #2
0
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with VirtualBox
	driver, err := vboxcommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating VirtualBox driver: %s", err)
	}

	steps := []multistep.Step{
		&vboxcommon.StepDownloadGuestAdditions{
			GuestAdditionsMode:   b.config.GuestAdditionsMode,
			GuestAdditionsURL:    b.config.GuestAdditionsURL,
			GuestAdditionsSHA256: b.config.GuestAdditionsSHA256,
			Ctx:                  b.config.ctx,
		},
		&common.StepDownload{
			Checksum:     b.config.ISOChecksum,
			ChecksumType: b.config.ISOChecksumType,
			Description:  "ISO",
			ResultKey:    "iso_path",
			Url:          b.config.ISOUrls,
			Extension:    "iso",
		},
		&vboxcommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		&vboxcommon.StepHTTPServer{
			HTTPDir:     b.config.HTTPDir,
			HTTPPortMin: b.config.HTTPPortMin,
			HTTPPortMax: b.config.HTTPPortMax,
		},
		new(vboxcommon.StepSuppressMessages),
		new(stepCreateVM),
		new(stepCreateDisk),
		new(stepAttachISO),
		&vboxcommon.StepAttachGuestAdditions{
			GuestAdditionsMode: b.config.GuestAdditionsMode,
		},
		new(vboxcommon.StepAttachFloppy),
		&vboxcommon.StepForwardSSH{
			CommConfig:     &b.config.SSHConfig.Comm,
			HostPortMin:    b.config.SSHHostPortMin,
			HostPortMax:    b.config.SSHHostPortMax,
			SkipNatMapping: b.config.SSHSkipNatMapping,
		},
		&vboxcommon.StepVBoxManage{
			Commands: b.config.VBoxManage,
			Ctx:      b.config.ctx,
		},
		&vboxcommon.StepRun{
			BootWait: b.config.BootWait,
			Headless: b.config.Headless,
		},
		&vboxcommon.StepTypeBootCommand{
			BootCommand: b.config.BootCommand,
			VMName:      b.config.VMName,
			Ctx:         b.config.ctx,
		},
		&communicator.StepConnect{
			Config:    &b.config.SSHConfig.Comm,
			Host:      vboxcommon.CommHost,
			SSHConfig: vboxcommon.SSHConfigFunc(b.config.SSHConfig),
			SSHPort:   vboxcommon.SSHPort,
		},
		&vboxcommon.StepUploadVersion{
			Path: b.config.VBoxVersionFile,
		},
		&vboxcommon.StepUploadGuestAdditions{
			GuestAdditionsMode: b.config.GuestAdditionsMode,
			GuestAdditionsPath: b.config.GuestAdditionsPath,
			Ctx:                b.config.ctx,
		},
		new(common.StepProvision),
		&vboxcommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
		},
		new(vboxcommon.StepRemoveDevices),
		&vboxcommon.StepVBoxManage{
			Commands: b.config.VBoxManagePost,
			Ctx:      b.config.ctx,
		},
		&vboxcommon.StepExport{
			Format:         b.config.Format,
			OutputDir:      b.config.OutputDir,
			ExportOpts:     b.config.ExportOpts.ExportOpts,
			SkipNatMapping: b.config.SSHSkipNatMapping,
		},
	}

	// Setup the state bag
	state := new(multistep.BasicStateBag)
	state.Put("cache", cache)
	state.Put("config", &b.config)
	state.Put("driver", driver)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Run
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return vboxcommon.NewArtifact(b.config.OutputDir)
}
Beispiel #3
0
// Run executes a Packer build and returns a packer.Artifact representing
// a VirtualBox appliance.
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with VirtualBox
	driver, err := vboxcommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating VirtualBox driver: %s", err)
	}

	// Set up the state.
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("debug", b.config.PackerDebug)
	state.Put("driver", driver)
	state.Put("cache", cache)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Build the steps.
	steps := []multistep.Step{
		&vboxcommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		new(vboxcommon.StepSuppressMessages),
		&common.StepCreateFloppy{
			Files:       b.config.FloppyConfig.FloppyFiles,
			Directories: b.config.FloppyConfig.FloppyDirectories,
		},
		&common.StepHTTPServer{
			HTTPDir:     b.config.HTTPDir,
			HTTPPortMin: b.config.HTTPPortMin,
			HTTPPortMax: b.config.HTTPPortMax,
		},
		&vboxcommon.StepDownloadGuestAdditions{
			GuestAdditionsMode:   b.config.GuestAdditionsMode,
			GuestAdditionsURL:    b.config.GuestAdditionsURL,
			GuestAdditionsSHA256: b.config.GuestAdditionsSHA256,
			Ctx:                  b.config.ctx,
		},
		&common.StepDownload{
			Checksum:     b.config.Checksum,
			ChecksumType: b.config.ChecksumType,
			Description:  "OVF/OVA",
			Extension:    "ova",
			ResultKey:    "vm_path",
			TargetPath:   b.config.TargetPath,
			Url:          []string{b.config.SourcePath},
		},
		&StepImport{
			Name:        b.config.VMName,
			ImportFlags: b.config.ImportFlags,
		},
		&vboxcommon.StepAttachGuestAdditions{
			GuestAdditionsMode: b.config.GuestAdditionsMode,
		},
		&vboxcommon.StepConfigureVRDP{
			VRDPBindAddress: b.config.VRDPBindAddress,
			VRDPPortMin:     b.config.VRDPPortMin,
			VRDPPortMax:     b.config.VRDPPortMax,
		},
		new(vboxcommon.StepAttachFloppy),
		&vboxcommon.StepForwardSSH{
			CommConfig:     &b.config.SSHConfig.Comm,
			HostPortMin:    b.config.SSHHostPortMin,
			HostPortMax:    b.config.SSHHostPortMax,
			SkipNatMapping: b.config.SSHSkipNatMapping,
		},
		&vboxcommon.StepVBoxManage{
			Commands: b.config.VBoxManage,
			Ctx:      b.config.ctx,
		},
		&vboxcommon.StepRun{
			BootWait: b.config.BootWait,
			Headless: b.config.Headless,
		},
		&vboxcommon.StepTypeBootCommand{
			BootCommand: b.config.BootCommand,
			VMName:      b.config.VMName,
			Ctx:         b.config.ctx,
		},
		&communicator.StepConnect{
			Config:    &b.config.SSHConfig.Comm,
			Host:      vboxcommon.CommHost(b.config.SSHConfig.Comm.SSHHost),
			SSHConfig: vboxcommon.SSHConfigFunc(b.config.SSHConfig),
			SSHPort:   vboxcommon.SSHPort,
		},
		&vboxcommon.StepUploadVersion{
			Path: b.config.VBoxVersionFile,
		},
		&vboxcommon.StepUploadGuestAdditions{
			GuestAdditionsMode: b.config.GuestAdditionsMode,
			GuestAdditionsPath: b.config.GuestAdditionsPath,
			Ctx:                b.config.ctx,
		},
		new(common.StepProvision),
		&vboxcommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
			Delay:   b.config.PostShutdownDelay,
		},
		new(vboxcommon.StepRemoveDevices),
		&vboxcommon.StepVBoxManage{
			Commands: b.config.VBoxManagePost,
			Ctx:      b.config.ctx,
		},
		&vboxcommon.StepExport{
			Format:         b.config.Format,
			OutputDir:      b.config.OutputDir,
			ExportOpts:     b.config.ExportOpts.ExportOpts,
			SkipNatMapping: b.config.SSHSkipNatMapping,
		},
	}

	// Run the steps.
	b.runner = common.NewRunnerWithPauseFn(steps, b.config.PackerConfig, ui, state)
	b.runner.Run(state)

	// Report any errors.
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return vboxcommon.NewArtifact(b.config.OutputDir)
}