Beispiel #1
0
func PipeThenCloseOta(src *ss.Conn, dst net.Conn, is_res bool, host string, user user.User) {
	const (
		dataLenLen  = 2
		hmacSha1Len = 10
		idxData0    = dataLenLen + hmacSha1Len
	)

	defer func() {
		dst.Close()
	}()
	var pipeBuf = leakybuf.NewLeakyBuf(nBuf, bufSize)
	buf := pipeBuf.Get()
	// sometimes it have to fill large block
	for i := 1; ; i += 1 {
		SetReadTimeout(src)
		n, err := io.ReadFull(src, buf[:dataLenLen+hmacSha1Len])
		if err != nil {
			if err == io.EOF {
				break
			}
			Log.Debug(fmt.Sprintf("conn=%p #%v read header error n=%v: %v", src, i, n, err))
			break
		}
		dataLen := binary.BigEndian.Uint16(buf[:dataLenLen])
		expectedHmacSha1 := buf[dataLenLen:idxData0]

		var dataBuf []byte
		if len(buf) < int(idxData0+dataLen) {
			dataBuf = make([]byte, dataLen)
		} else {
			dataBuf = buf[idxData0 : idxData0+dataLen]
		}
		if n, err := io.ReadFull(src, dataBuf); err != nil {
			if err == io.EOF {
				break
			}
			Log.Debug(fmt.Sprintf("conn=%p #%v read data error n=%v: %v", src, i, n, err))
			break
		}
		chunkIdBytes := make([]byte, 4)
		chunkId := src.GetAndIncrChunkId()
		binary.BigEndian.PutUint32(chunkIdBytes, chunkId)
		actualHmacSha1 := ss.HmacSha1(append(src.GetIv(), chunkIdBytes...), dataBuf)
		if !bytes.Equal(expectedHmacSha1, actualHmacSha1) {
			Log.Debug(fmt.Sprintf("conn=%p #%v read data hmac-sha1 mismatch, iv=%v chunkId=%v src=%v dst=%v len=%v expeced=%v actual=%v", src, i, src.GetIv(), chunkId, src.RemoteAddr(), dst.RemoteAddr(), dataLen, expectedHmacSha1, actualHmacSha1))
			break
		}

		if n, err := dst.Write(dataBuf); err != nil {
			Log.Debug(fmt.Sprintf("conn=%p #%v write data error n=%v: %v", dst, i, n, err))
			break
		}
		if is_res {
			err := storage.IncrSize(user, n)
			if err != nil {
				Log.Error(err)
			}
			Log.Debug(fmt.Sprintf("[port-%d] store size: %d", user.GetPort(), n))
		}
	}
	return
}
Beispiel #2
0
func getRequest(conn *ss.Conn, auth bool) (host string, res_size int, ota bool, err error) {
	var n int
	ss.SetReadTimeout(conn)

	// buf size should at least have the same size with the largest possible
	// request size (when addrType is 3, domain name has at most 256 bytes)
	// 1(addrType) + 1(lenByte) + 256(max length address) + 2(port) + 10(hmac-sha1)
	buf := make([]byte, 270)
	// read till we get possible domain length field
	if n, err = io.ReadFull(conn, buf[:idType+1]); err != nil {
		return
	}
	res_size += n

	var reqStart, reqEnd int
	addrType := buf[idType]
	switch addrType & ss.AddrMask {
	case typeIPv4:
		reqStart, reqEnd = idIP0, idIP0+lenIPv4
	case typeIPv6:
		reqStart, reqEnd = idIP0, idIP0+lenIPv6
	case typeDm:
		if n, err = io.ReadFull(conn, buf[idType+1:idDmLen+1]); err != nil {
			return
		}
		reqStart, reqEnd = idDm0, int(idDm0+buf[idDmLen]+lenDmBase)
	default:
		err = fmt.Errorf("addr type %d not supported", addrType&ss.AddrMask)
		return
	}
	res_size += n

	if n, err = io.ReadFull(conn, buf[reqStart:reqEnd]); err != nil {
		return
	}
	res_size += n

	// Return string for typeIP is not most efficient, but browsers (Chrome,
	// Safari, Firefox) all seems using typeDm exclusively. So this is not a
	// big problem.
	switch addrType & ss.AddrMask {
	case typeIPv4:
		host = net.IP(buf[idIP0 : idIP0+net.IPv4len]).String()
	case typeIPv6:
		host = net.IP(buf[idIP0 : idIP0+net.IPv6len]).String()
	case typeDm:
		host = string(buf[idDm0 : idDm0+buf[idDmLen]])
	}
	// parse port
	port := binary.BigEndian.Uint16(buf[reqEnd-2 : reqEnd])
	host = net.JoinHostPort(host, strconv.Itoa(int(port)))
	// if specified one time auth enabled, we should verify this
	if auth || addrType&ss.OneTimeAuthMask > 0 {
		ota = true
		if n, err = io.ReadFull(conn, buf[reqEnd:reqEnd+lenHmacSha1]); err != nil {
			return
		}
		iv := conn.GetIv()
		key := conn.GetKey()
		actualHmacSha1Buf := ss.HmacSha1(append(iv, key...), buf[:reqEnd])
		if !bytes.Equal(buf[reqEnd:reqEnd+lenHmacSha1], actualHmacSha1Buf) {
			err = fmt.Errorf("verify one time auth failed, iv=%v key=%v data=%v", iv, key, buf[:reqEnd])
			return
		}
		res_size += n
	}
	return
}
Beispiel #3
0
func handleConnection(user user.User, conn *ss.Conn, auth bool) {
	var host string

	connCnt++ // this maybe not accurate, but should be enough
	if connCnt-nextLogConnCnt >= 0 {
		// XXX There's no xadd in the atomic package, so it's difficult to log
		// the message only once with low cost. Also note nextLogConnCnt maybe
		// added twice for current peak connection number level.
		Log.Debug("Number of client connections reaches %d\n", nextLogConnCnt)
		nextLogConnCnt += logCntDelta
	}

	// function arguments are always evaluated, so surround debug statement
	// with if statement
	Log.Debug(fmt.Sprintf("new client %s->%s\n", conn.RemoteAddr().String(), conn.LocalAddr()))
	closed := false
	defer func() {
		if ssdebug {
			Log.Debug(fmt.Sprintf("closed pipe %s<->%s\n", conn.RemoteAddr(), host))
		}
		connCnt--
		if !closed {
			conn.Close()
		}
	}()

	host, res_size, ota, err := getRequest(conn, auth)
	if err != nil {
		Log.Error("error getting request", conn.RemoteAddr(), conn.LocalAddr(), err)
		return
	}
	Log.Info(fmt.Sprintf("[port-%d]connecting %s ", user.GetPort(), host))
	remote, err := net.Dial("tcp", host)
	if err != nil {
		if ne, ok := err.(*net.OpError); ok && (ne.Err == syscall.EMFILE || ne.Err == syscall.ENFILE) {
			// log too many open file error
			// EMFILE is process reaches open file limits, ENFILE is system limit
			Log.Error("dial error:", err)
		} else {
			Log.Error("error connecting to:", host, err)
		}
		return
	}
	defer func() {
		if !closed {
			remote.Close()
		}
	}()

	// debug conn info
	Log.Debug(fmt.Sprintf("%d conn debug:  local addr: %s | remote addr: %s network: %s ", user.GetPort(),
		conn.LocalAddr().String(), conn.RemoteAddr().String(), conn.RemoteAddr().Network()))
	err = storage.IncrSize(user, res_size)
	if err != nil {
		Log.Error(err)
		return
	}
	err = storage.MarkUserOnline(user)
	if err != nil {
		Log.Error(err)
		return
	}
	Log.Debug(fmt.Sprintf("[port-%d] store size: %d", user.GetPort(), res_size))

	Log.Info(fmt.Sprintf("piping %s<->%s ota=%v connOta=%v", conn.RemoteAddr(), host, ota, conn.IsOta()))

	if ota {
		go PipeThenCloseOta(conn, remote, false, host, user)
	} else {
		go PipeThenClose(conn, remote, false, host, user)
	}

	PipeThenClose(remote, conn, true, host, user)
	closed = true
	return
}