Beispiel #1
0
// createTestWallet creates a test LightningWallet will a total of 20BTC
// available for funding channels.
func createTestWallet(miningNode *rpctest.Harness, netParams *chaincfg.Params) (string, *LightningWallet, error) {
	privPass := []byte("private-test")
	tempTestDir, err := ioutil.TempDir("", "lnwallet")
	if err != nil {
		return "", nil, nil
	}

	rpcConfig := miningNode.RPCConfig()
	config := &Config{
		PrivatePass: privPass,
		HdSeed:      testHdSeed[:],
		DataDir:     tempTestDir,
		NetParams:   netParams,
		RpcHost:     rpcConfig.Host,
		RpcUser:     rpcConfig.User,
		RpcPass:     rpcConfig.Pass,
		CACert:      rpcConfig.Certificates,
	}

	wallet, _, err := NewLightningWallet(config)
	if err != nil {
		return "", nil, err
	}
	if err := wallet.Startup(); err != nil {
		return "", nil, err
	}

	// Load our test wallet with 5 outputs each holding 4BTC.
	if err := loadTestCredits(miningNode, wallet, 5, 4); err != nil {
		return "", nil, err
	}

	return tempTestDir, wallet, nil
}
Beispiel #2
0
func getTestTxId(miner *rpctest.Harness) (*wire.ShaHash, error) {
	script, err := txscript.PayToAddrScript(testAddr)
	if err != nil {
		return nil, err
	}

	outputs := []*wire.TxOut{&wire.TxOut{2e8, script}}
	return miner.CoinbaseSpend(outputs)
}
Beispiel #3
0
// makeTestOutput creates an on-chain output paying to a freshly generated
// p2pkh output with the specified amount.
func makeTestOutput(r *rpctest.Harness, t *testing.T,
	amt btcutil.Amount) (*btcec.PrivateKey, *wire.OutPoint, []byte, error) {

	// Create a fresh key, then send some coins to an address spendable by
	// that key.
	key, err := btcec.NewPrivateKey(btcec.S256())
	if err != nil {
		return nil, nil, nil, err
	}

	// Using the key created above, generate a pkScript which it's able to
	// spend.
	a, err := btcutil.NewAddressPubKey(key.PubKey().SerializeCompressed(), r.ActiveNet)
	if err != nil {
		return nil, nil, nil, err
	}
	selfAddrScript, err := txscript.PayToAddrScript(a.AddressPubKeyHash())
	if err != nil {
		return nil, nil, nil, err
	}
	output := &wire.TxOut{PkScript: selfAddrScript, Value: 1e8}

	// Next, create and broadcast a transaction paying to the output.
	fundTx, err := r.CreateTransaction([]*wire.TxOut{output}, 10)
	if err != nil {
		return nil, nil, nil, err
	}
	txHash, err := r.Node.SendRawTransaction(fundTx, true)
	if err != nil {
		return nil, nil, nil, err
	}

	// The transaction created above should be included within the next
	// generated block.
	blockHash, err := r.Node.Generate(1)
	if err != nil {
		return nil, nil, nil, err
	}
	assertTxInBlock(r, t, blockHash[0], txHash)

	// Locate the output index of the coins spendable by the key we
	// generated above, this is needed in order to create a proper utxo for
	// this output.
	var outputIndex uint32
	if bytes.Equal(fundTx.TxOut[0].PkScript, selfAddrScript) {
		outputIndex = 0
	} else {
		outputIndex = 1
	}

	utxo := &wire.OutPoint{
		Hash:  fundTx.TxHash(),
		Index: outputIndex,
	}

	return key, utxo, selfAddrScript, nil
}
Beispiel #4
0
func loadTestCredits(miner *rpctest.Harness, w *LightningWallet, numOutputs, btcPerOutput int) error {
	// Using the mining node, spend from a coinbase output numOutputs to
	// give us btcPerOutput with each output.
	satoshiPerOutput := btcutil.Amount(btcPerOutput * 1e8)
	addrs := make([]btcutil.Address, 0, numOutputs)
	for i := 0; i < numOutputs; i++ {
		// Grab a fresh address from the wallet to house this output.
		walletAddr, err := w.NewAddress(waddrmgr.DefaultAccountNum)
		if err != nil {
			return err
		}

		addrs = append(addrs, walletAddr)

		outputMap := map[string]btcutil.Amount{walletAddr.String(): satoshiPerOutput}
		if _, err := miner.CoinbaseSpend(outputMap); err != nil {
			return err
		}
	}

	// TODO(roasbeef): shouldn't hardcode 10, use config param that dictates
	// how many confs we wait before opening a channel.
	// Generate 10 blocks with the mining node, this should mine all
	// numOutputs transactions created above. We generate 10 blocks here
	// in order to give all the outputs a "sufficient" number of confirmations.
	if _, err := miner.Node.Generate(10); err != nil {
		return err
	}

	_, bestHeight, err := miner.Node.GetBestBlock()
	if err != nil {
		return err
	}

	// Wait until the wallet has finished syncing up to the main chain.
	ticker := time.NewTicker(100 * time.Millisecond)
out:
	for {
		select {
		case <-ticker.C:
			if w.Manager.SyncedTo().Height == bestHeight {
				break out
			}
		}
	}
	ticker.Stop()

	// Trigger a re-scan to ensure the wallet knows of the newly created
	// outputs it can spend.
	if err := w.Rescan(addrs, nil); err != nil {
		return err
	}

	return nil
}
Beispiel #5
0
func loadTestCredits(miner *rpctest.Harness, w *lnwallet.LightningWallet, numOutputs, btcPerOutput int) error {
	// Using the mining node, spend from a coinbase output numOutputs to
	// give us btcPerOutput with each output.
	satoshiPerOutput := int64(btcPerOutput * 1e8)
	addrs := make([]btcutil.Address, 0, numOutputs)
	for i := 0; i < numOutputs; i++ {
		// Grab a fresh address from the wallet to house this output.
		walletAddr, err := w.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			return err
		}

		script, err := txscript.PayToAddrScript(walletAddr)
		if err != nil {
			return err
		}

		addrs = append(addrs, walletAddr)

		output := &wire.TxOut{satoshiPerOutput, script}
		if _, err := miner.CoinbaseSpend([]*wire.TxOut{output}); err != nil {
			return err
		}
	}

	// TODO(roasbeef): shouldn't hardcode 10, use config param that dictates
	// how many confs we wait before opening a channel.
	// Generate 10 blocks with the mining node, this should mine all
	// numOutputs transactions created above. We generate 10 blocks here
	// in order to give all the outputs a "sufficient" number of confirmations.
	if _, err := miner.Node.Generate(10); err != nil {
		return err
	}

	// Wait until the wallet has finished syncing up to the main chain.
	ticker := time.NewTicker(100 * time.Millisecond)
	expectedBalance := btcutil.Amount(satoshiPerOutput * int64(numOutputs))
out:
	for {
		select {
		case <-ticker.C:
			balance, err := w.ConfirmedBalance(1, false)
			if err != nil {
				return err
			}
			if balance == expectedBalance {
				break out
			}
		}
	}
	ticker.Stop()

	return nil
}
Beispiel #6
0
// createCSVOutput creates an output paying to a trivially redeemable CSV
// pkScript with the specified time-lock.
func createCSVOutput(r *rpctest.Harness, t *testing.T,
	numSatoshis btcutil.Amount, timeLock int32,
	isSeconds bool) ([]byte, *wire.OutPoint, *wire.MsgTx, error) {

	// Convert the time-lock to the proper sequence lock based according to
	// if the lock is seconds or time based.
	sequenceLock := blockchain.LockTimeToSequence(isSeconds,
		uint32(timeLock))

	// Our CSV script is simply: <sequenceLock> OP_CSV OP_DROP
	b := txscript.NewScriptBuilder().
		AddInt64(int64(sequenceLock)).
		AddOp(txscript.OP_CHECKSEQUENCEVERIFY).
		AddOp(txscript.OP_DROP)
	csvScript, err := b.Script()
	if err != nil {
		return nil, nil, nil, err
	}

	// Using the script generated above, create a P2SH output which will be
	// accepted into the mempool.
	p2shAddr, err := btcutil.NewAddressScriptHash(csvScript, r.ActiveNet)
	if err != nil {
		return nil, nil, nil, err
	}
	p2shScript, err := txscript.PayToAddrScript(p2shAddr)
	if err != nil {
		return nil, nil, nil, err
	}
	output := &wire.TxOut{
		PkScript: p2shScript,
		Value:    int64(numSatoshis),
	}

	// Finally create a valid transaction which creates the output crafted
	// above.
	tx, err := r.CreateTransaction([]*wire.TxOut{output}, 10)
	if err != nil {
		return nil, nil, nil, err
	}

	var outputIndex uint32
	if !bytes.Equal(tx.TxOut[0].PkScript, p2shScript) {
		outputIndex = 1
	}

	utxo := &wire.OutPoint{
		Hash:  tx.TxHash(),
		Index: outputIndex,
	}

	return csvScript, utxo, tx, nil
}
Beispiel #7
0
// InitializeSeedNodes initialized alice and bob nodes given an already
// running instance of btcd's rpctest harness and extra command line flags,
// which should be formatted properly - "--arg=value".
func (n *networkHarness) InitializeSeedNodes(r *rpctest.Harness, lndArgs []string) error {
	nodeConfig := r.RPCConfig()

	n.netParams = r.ActiveNet
	n.Miner = r
	n.rpcConfig = nodeConfig

	var err error
	n.Alice, err = newLightningNode(&nodeConfig, lndArgs)
	if err != nil {
		return err
	}
	n.Bob, err = newLightningNode(&nodeConfig, lndArgs)
	if err != nil {
		return err
	}

	n.activeNodes[n.Alice.nodeId] = n.Alice
	n.activeNodes[n.Bob.nodeId] = n.Bob

	return err
}
Beispiel #8
0
func testListTransactionDetails(miner *rpctest.Harness, wallet *lnwallet.LightningWallet, t *testing.T) {
	t.Log("Running list transaction details test")

	// Create 5 new outputs spendable by the wallet.
	const numTxns = 5
	const outputAmt = btcutil.SatoshiPerBitcoin
	txids := make(map[wire.ShaHash]struct{})
	for i := 0; i < numTxns; i++ {
		addr, err := wallet.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			t.Fatalf("unable to create new address: %v", err)
		}
		script, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to create output script: %v", err)
		}

		output := &wire.TxOut{outputAmt, script}
		txid, err := miner.CoinbaseSpend([]*wire.TxOut{output})
		if err != nil {
			t.Fatalf("unable to send coinbase: %v", err)
		}
		txids[*txid] = struct{}{}
	}

	// Generate 10 blocks to mine all the transactions created above.
	const numBlocksMined = 10
	blocks, err := miner.Node.Generate(numBlocksMined)
	if err != nil {
		t.Fatalf("unable to mine blocks: %v", err)
	}

	// Next, fetch all the current transaction details.
	// TODO(roasbeef): use ntfn client here instead?
	time.Sleep(time.Second * 2)
	txDetails, err := wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}

	// Each of the transactions created above should be found with the
	// proper details populated.
	for _, txDetail := range txDetails {
		if _, ok := txids[txDetail.Hash]; !ok {
			continue
		}

		if txDetail.NumConfirmations != numBlocksMined {
			t.Fatalf("num confs incorrect, got %v expected %v",
				txDetail.NumConfirmations, numBlocksMined)
		}
		if txDetail.Value != outputAmt {
			t.Fatalf("tx value incorrect, got %v expected %v",
				txDetail.Value, outputAmt)
		}
		if !bytes.Equal(txDetail.BlockHash[:], blocks[0][:]) {
			t.Fatalf("block hash mismatch, got %v expected %v",
				txDetail.BlockHash, blocks[0])
		}

		delete(txids, txDetail.Hash)
	}
	if len(txids) != 0 {
		t.Fatalf("all transactions not found in details!")
	}

	// Next create a transaction paying to an output which isn't under the
	// wallet's control.
	b := txscript.NewScriptBuilder()
	b.AddOp(txscript.OP_0)
	outputScript, err := b.Script()
	if err != nil {
		t.Fatalf("unable to make output script: %v", err)
	}
	burnOutput := wire.NewTxOut(outputAmt, outputScript)
	burnTXID, err := wallet.SendOutputs([]*wire.TxOut{burnOutput})
	if err != nil {
		t.Fatalf("unable to create burn tx: %v", err)
	}
	burnBlock, err := miner.Node.Generate(1)
	if err != nil {
		t.Fatalf("unable to mine block: %v", err)
	}

	// Fetch the transaction details again, the new transaction should be
	// shown as debiting from the wallet's balance.
	time.Sleep(time.Second * 2)
	txDetails, err = wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}
	var burnTxFound bool
	for _, txDetail := range txDetails {
		if !bytes.Equal(txDetail.Hash[:], burnTXID[:]) {
			continue
		}

		burnTxFound = true
		if txDetail.NumConfirmations != 1 {
			t.Fatalf("num confs incorrect, got %v expected %v",
				txDetail.NumConfirmations, 1)
		}
		if txDetail.Value >= -outputAmt {
			t.Fatalf("tx value incorrect, got %v expected %v",
				txDetail.Value, -outputAmt)
		}
		if !bytes.Equal(txDetail.BlockHash[:], burnBlock[0][:]) {
			t.Fatalf("block hash mismatch, got %v expected %v",
				txDetail.BlockHash, burnBlock[0])
		}
	}
	if !burnTxFound {
		t.Fatalf("tx burning btc not found")
	}
}
Beispiel #9
0
// newBobNode generates a test "ln node" to interact with Alice (us). For the
// funding transaction, bob has a single output totaling 7BTC. For our basic
// test, he'll fund the channel with 5BTC, leaving 2BTC to the change output.
// TODO(roasbeef): proper handling of change etc.
func newBobNode(miner *rpctest.Harness, amt btcutil.Amount) (*bobNode, error) {
	// First, parse Bob's priv key in order to obtain a key he'll use for the
	// multi-sig funding transaction.
	privKey, pubKey := btcec.PrivKeyFromBytes(btcec.S256(), bobsPrivKey)

	// Next, generate an output redeemable by bob.
	pkHash := btcutil.Hash160(pubKey.SerializeCompressed())
	bobAddr, err := btcutil.NewAddressWitnessPubKeyHash(
		pkHash,
		miner.ActiveNet)
	if err != nil {
		return nil, err
	}
	bobAddrScript, err := txscript.PayToAddrScript(bobAddr)
	if err != nil {
		return nil, err
	}

	// Give bobNode one 7 BTC output for use in creating channels.
	output := &wire.TxOut{7e8, bobAddrScript}
	mainTxid, err := miner.CoinbaseSpend([]*wire.TxOut{output})
	if err != nil {
		return nil, err
	}

	// Mine a block in order to include the above output in a block. During
	// the reservation workflow, we currently test to ensure that the funding
	// output we're given actually exists.
	if _, err := miner.Node.Generate(1); err != nil {
		return nil, err
	}

	// Grab the transaction in order to locate the output index to Bob.
	tx, err := miner.Node.GetRawTransaction(mainTxid)
	if err != nil {
		return nil, err
	}
	found, index := lnwallet.FindScriptOutputIndex(tx.MsgTx(), bobAddrScript)
	if !found {
		return nil, fmt.Errorf("output to bob never created")
	}

	prevOut := wire.NewOutPoint(mainTxid, index)
	bobTxIn := wire.NewTxIn(prevOut, nil, nil)

	// Using bobs priv key above, create a change output he can spend.
	bobChangeOutput := wire.NewTxOut(2*1e8, bobAddrScript)

	// Bob's initial revocation hash is just his private key with the first
	// byte changed...
	var revocation [32]byte
	copy(revocation[:], bobsPrivKey)
	revocation[0] = 0xff

	// His ID is just as creative...
	var id [wire.HashSize]byte
	id[0] = 0xff

	return &bobNode{
		id:               pubKey,
		privKey:          privKey,
		channelKey:       pubKey,
		deliveryAddress:  bobAddr,
		revocation:       revocation,
		fundingAmt:       amt,
		delay:            5,
		availableOutputs: []*wire.TxIn{bobTxIn},
		changeOutputs:    []*wire.TxOut{bobChangeOutput},
	}, nil
}
Beispiel #10
0
func testTransactionSubscriptions(miner *rpctest.Harness, w *lnwallet.LightningWallet, t *testing.T) {
	t.Log("Running transaction subscriptions test")

	// First, check to see if this wallet meets the TransactionNotifier
	// interface, if not then we'll skip this test for this particular
	// implementation of the WalletController.
	txClient, err := w.SubscribeTransactions()
	if err != nil {
		t.Fatalf("unable to generate tx subscription: %v")
	}
	defer txClient.Cancel()

	const (
		outputAmt = btcutil.SatoshiPerBitcoin
		numTxns   = 3
	)
	unconfirmedNtfns := make(chan struct{})
	go func() {
		for i := 0; i < numTxns; i++ {
			txDetail := <-txClient.UnconfirmedTransactions()
			if txDetail.NumConfirmations != 0 {
				t.Fatalf("incorrect number of confs, expected %v got %v",
					0, txDetail.NumConfirmations)
			}
			if txDetail.Value != outputAmt {
				t.Fatalf("incorrect output amt, expected %v got %v",
					outputAmt, txDetail.Value)
			}
			if txDetail.BlockHash != nil {
				t.Fatalf("block hash should be nil, is instead %v",
					txDetail.BlockHash)
			}
		}

		close(unconfirmedNtfns)
	}()

	// Next, fetch a fresh address from the wallet, create 3 new outputs
	// with the pkScript.
	for i := 0; i < numTxns; i++ {
		addr, err := w.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			t.Fatalf("unable to create new address: %v", err)
		}
		script, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to create output script: %v", err)
		}

		output := &wire.TxOut{outputAmt, script}
		if _, err := miner.CoinbaseSpend([]*wire.TxOut{output}); err != nil {
			t.Fatalf("unable to send coinbase: %v", err)
		}
	}

	// We should receive a notification for all three transactions
	// generated above.
	select {
	case <-time.After(time.Second * 5):
		t.Fatalf("transactions not received after 3 seconds")
	case <-unconfirmedNtfns: // Fall through on successs
	}

	confirmedNtfns := make(chan struct{})
	go func() {
		for i := 0; i < numTxns; i++ {
			txDetail := <-txClient.ConfirmedTransactions()
			if txDetail.NumConfirmations != 1 {
				t.Fatalf("incorrect number of confs, expected %v got %v",
					0, txDetail.NumConfirmations)
			}
			if txDetail.Value != outputAmt {
				t.Fatalf("incorrect output amt, expected %v got %v",
					outputAmt, txDetail.Value)
			}
		}
		close(confirmedNtfns)
	}()

	// Next mine a single block, all the transactions generated above
	// should be included.
	if _, err := miner.Node.Generate(1); err != nil {
		t.Fatalf("unable to generate block: %v", err)
	}

	// We should receive a notification for all three transactions
	// since they should be mined in the next block.
	select {
	case <-time.After(time.Second * 5):
		t.Fatalf("transactions not received after 3 seconds")
	case <-confirmedNtfns: // Fall through on successs
	}
}