func (arb *Arbiter) preStep2(inv_dt, slop, bias float32) {
a := arb.ShapeA.Body
b := arb.ShapeB.Body
for i := 0; i < arb.NumContacts; i++ {
con := arb.Contacts[i]
// Calculate the offsets.
con.r1 = vect.Sub(con.p, a.p)
con.r2 = vect.Sub(con.p, b.p)
//con.Normal = vect.Vect{-1,0}
// Calculate the mass normal and mass tangent.
con.nMass = 1.0 / k_scalar(a, b, con.r1, con.r2, con.n)
con.tMass = 1.0 / k_scalar(a, b, con.r1, con.r2, vect.Perp(con.n))
// Calculate the target bias velocity.
con.bias = -bias * inv_dt * vect.FMin(0.0, con.dist+slop)
con.jBias = 0.0
//con.jtAcc = 0
//con.jnAcc = 0
//fmt.Println("con.dist", con.dist)
// Calculate the target bounce velocity.
con.bounce = normal_relative_velocity(a, b, con.r1, con.r2, con.n) * arb.e
}
}
// Checks if verts forms a valid polygon.
// The vertices must be convex and winded clockwise.
func (verts Vertices) ValidatePolygon() bool {
numVerts := len(verts)
for i := 0; i < numVerts; i++ {
a := verts[i]
b := verts[(i+1)%numVerts]
c := verts[(i+2)%numVerts]
if vect.Cross(vect.Sub(b, a), vect.Sub(c, b)) > 0.0 {
return false
}
}
return true
}
func (this *PivotJoint) ApplyImpulse() {
a, b := this.BodyA, this.BodyB
r1, r2 := this.r1, this.r2
// compute relative velocity
vr := relative_velocity2(a, b, r1, r2)
// compute normal impulse
j := mult_k(vect.Sub(this.bias, vr), this.k1, this.k2)
jOld := this.jAcc
this.jAcc = vect.Clamp(vect.Add(this.jAcc, j), this.jMaxLen)
j = vect.Sub(this.jAcc, jOld)
// apply impulse
apply_impulses(a, b, this.r1, this.r2, j)
}
func TestOverlap2(a, b AABB) bool {
d1 := vect.Sub(b.Lower, a.Upper)
d2 := vect.Sub(a.Lower, b.Upper)
if d1.X > 0.0 || d1.Y > 0.0 {
return false
}
if d2.X > 0.0 || d2.Y > 0.0 {
return false
}
return true
}
func RayAgainstPolygon(c *RayCast, poly *PolygonShape, outT *float32) bool {
for i, axis := range poly.TAxes {
cosAngle := vect.Dot(c.dir, axis.N)
if cosAngle < EPS && cosAngle >= -EPS {
return false
}
t := -(vect.Dot(c.begin, axis.N) - axis.D) / cosAngle
if t > 1.0 || t < 0.0 {
return false
}
//check if point belongs to polygon line
point := vect.Add(c.begin, vect.Mult(c.dir, t))
v1 := poly.TVerts[i]
v2 := poly.TVerts[(i+1)%poly.NumVerts]
polyDir := vect.Sub(v2, v1)
polyT := float32(-1.0)
if polyDir.X < EPS || polyDir.X > -EPS {
polyT = (point.Y - v1.Y) / polyDir.Y
} else {
polyT = (point.Y - v1.Y) / polyDir.Y
}
if polyT >= 0.0 && polyT <= 1.0 {
*outT = t
return true
}
}
return false
}
func circle2circleQuery(p1, p2 vect.Vect, r1, r2 float32, con *Contact) int {
minDist := r1 + r2
delta := vect.Sub(p2, p1)
distSqr := delta.LengthSqr()
if distSqr >= minDist*minDist {
return 0
}
dist := float32(math.Sqrt(float64(distSqr)))
pDist := dist
if dist == 0.0 {
pDist = float32(math.Inf(1))
}
pos := vect.Add(p1, vect.Mult(delta, 0.5+(r1-0.5*minDist)/pDist))
norm := vect.Vect{1, 0}
if dist != 0.0 {
norm = vect.Mult(delta, 1.0/dist)
}
con.reset(pos, norm, dist-minDist, 0)
return 1
}
func (arb *Arbiter) update(a, b *Shape, contacts []*Contact, numContacts int) {
oldContacts := arb.Contacts
arb.ShapeA, arb.ShapeB = a, b
arb.BodyA, arb.BodyB = arb.ShapeA.Body, arb.ShapeB.Body
for _, oldC := range oldContacts {
for _, newC := range contacts {
if newC.hash == oldC.hash {
newC.jnAcc = oldC.jnAcc
newC.jtAcc = oldC.jtAcc
newC.jBias = oldC.jBias
}
}
}
arb.Contacts = contacts
arb.NumContacts = numContacts
arb.u = a.u * b.u
arb.e = a.e * b.e
arb.Surface_vr = vect.Sub(a.Surface_v, b.Surface_v)
if arb.state == arbiterStateCached {
arb.state = arbiterStateFirstColl
}
}
func RayAgainstCircle(cast *RayCast, circle *CircleShape, outT *float32) bool {
fromRayToCircle := vect.Sub(cast.begin, circle.Tc)
a := vect.Dot(cast.dir, cast.dir)
b := 2.0 * vect.Dot(fromRayToCircle, cast.dir)
c := vect.Dot(fromRayToCircle, fromRayToCircle) - circle.Radius*circle.Radius
D := b*b - 4.0*a*c
if D < 0.0 {
return false
}
D = float32(math.Sqrt(float64(D)))
t1 := (-b - D) / (2.0 * a)
t2 := (-b + D) / (2.0 * a)
if (t1 >= 0.0 && t1 <= 1.0) || (t2 >= 0.0 && t2 <= 1.0) {
if t1 > t2 && t2 >= 0.0 {
*outT = t2
} else if t1 >= 0.0 {
*outT = t1
}
return true
}
return false
}
// Recalculates the global center of the circle and the the bounding box.
func (circle *CircleShape) update(xf transform.Transform) AABB {
//global center of the circle
center := xf.TransformVect(circle.Position)
circle.Tc = center
rv := vect.Vect{circle.Radius, circle.Radius}
return AABB{
vect.Sub(center, rv),
vect.Add(center, rv),
}
}
func (this *PivotJoint) PreStep(dt float32) {
a, b := this.BodyA, this.BodyB
this.r1 = transform.RotateVect(this.Anchor1, transform.Rotation{a.rot.X, a.rot.Y})
this.r2 = transform.RotateVect(this.Anchor2, transform.Rotation{b.rot.X, b.rot.Y})
// Calculate mass tensor
k_tensor(a, b, this.r1, this.r2, &this.k1, &this.k2)
// compute max impulse
this.jMaxLen = this.MaxForce * dt
// calculate bias velocity
delta := vect.Sub(vect.Add(b.p, this.r2), vect.Add(a.p, this.r1))
this.bias = vect.Clamp(vect.Mult(delta, -bias_coef(this.ErrorBias, dt)/dt), this.MaxBias)
}
func (arb *Arbiter) applyImpulse3() {
a := arb.ShapeA.Body
b := arb.ShapeB.Body
for i := 0; i < arb.NumContacts; i++ {
con := arb.Contacts[i]
n := con.n
r1 := con.r1
r2 := con.r2
// Calculate the relative bias velocities.
vb1 := vect.Add(a.v_bias, vect.Mult(vect.Perp(r1), a.w_bias))
vb2 := vect.Add(b.v_bias, vect.Mult(vect.Perp(r2), b.w_bias))
vbn := vect.Dot(vect.Sub(vb2, vb1), n)
// Calculate the relative velocity.
vr := relative_velocity(a, b, r1, r2)
vrn := vect.Dot(vr, n)
// Calculate the relative tangent velocity.
vrt := vect.Dot(vect.Add(vr, arb.Surface_vr), vect.Perp(n))
// Calculate and clamp the bias impulse.
jbn := (con.bias - vbn) * con.nMass
jbnOld := con.jBias
con.jBias = vect.FMax(jbnOld+jbn, 0.0)
// Calculate and clamp the normal impulse.
jn := -(con.bounce + vrn) * con.nMass
jnOld := con.jnAcc
con.jnAcc = vect.FMax(jnOld+jn, 0.0)
// Calculate and clamp the friction impulse.
jtMax := arb.u * con.jnAcc
jt := -vrt * con.tMass
jtOld := con.jtAcc
con.jtAcc = vect.FClamp(jtOld+jt, -jtMax, jtMax)
// Apply the bias impulse.
apply_bias_impulses(a, b, r1, r2, vect.Mult(n, con.jBias-jbnOld))
// Apply the final impulse.
apply_impulses(a, b, r1, r2, transform.RotateVect(n, transform.Rotation{con.jnAcc - jnOld, con.jtAcc - jtOld}))
}
}
//Called to update N, Tn, Ta, Tb and the the bounding box.
func (segment *SegmentShape) update(xf transform.Transform) AABB {
a := xf.TransformVect(segment.A)
b := xf.TransformVect(segment.B)
segment.Ta = a
segment.Tb = b
segment.N = vect.Perp(vect.Normalize(vect.Sub(segment.B, segment.A)))
segment.Tn = xf.RotateVect(segment.N)
rv := vect.Vect{segment.Radius, segment.Radius}
min := vect.Min(a, b)
min.Sub(rv)
max := vect.Max(a, b)
max.Add(rv)
return AABB{
min,
max,
}
}
func circle2polyFunc(contacts []*Contact, circle *CircleShape, poly *PolygonShape) int {
axes := poly.TAxes
mini := 0
min := vect.Dot(axes[0].N, circle.Tc) - axes[0].D - circle.Radius
for i, axis := range axes {
dist := vect.Dot(axis.N, circle.Tc) - axis.D - circle.Radius
if dist > 0.0 {
return 0
} else if dist > min {
min = dist
mini = i
}
}
n := axes[mini].N
a := poly.TVerts[mini]
b := poly.TVerts[(mini+1)%poly.NumVerts]
dta := vect.Cross(n, a)
dtb := vect.Cross(n, b)
dt := vect.Cross(n, circle.Tc)
if dt < dtb {
return circle2circleQuery(circle.Tc, b, circle.Radius, 0.0, contacts[0])
} else if dt < dta {
contacts[0].reset(
vect.Sub(circle.Tc, vect.Mult(n, circle.Radius+min/2.0)),
vect.Mult(n, -1),
min,
0,
)
return 1
} else {
return circle2circleQuery(circle.Tc, a, circle.Radius, 0.0, contacts[0])
}
panic("Never reached")
}
func (spring *DampedSpring) PreStep(dt float32) {
a := spring.BodyA
b := spring.BodyB
spring.r1 = transform.RotateVect(spring.Anchor1, transform.Rotation{a.rot.X, a.rot.Y})
spring.r2 = transform.RotateVect(spring.Anchor2, transform.Rotation{a.rot.X, a.rot.Y})
delta := vect.Sub(vect.Add(b.p, spring.r2), vect.Add(a.p, spring.r1))
dist := vect.Length(delta)
if dist == 0 {
dist = float32(math.Inf(1))
}
spring.n = vect.Mult(delta, 1.0/dist)
k := k_scalar(a, b, spring.r1, spring.r2, spring.n)
spring.nMass = 1.0 / k
spring.targetVRN = 0.0
spring.vCoef = float32(1.0 - math.Exp(float64(-spring.Damping*dt*k)))
fSpring := spring.SpringForceFunc(spring, dist)
apply_impulses(a, b, spring.r1, spring.r2, vect.Mult(spring.n, fSpring*dt))
}
func relative_velocity2(a, b *Body, r1, r2 vect.Vect) vect.Vect {
v1 := vect.Add(b.v, vect.Mult(vect.Perp(r2), b.w))
v2 := vect.Add(a.v, vect.Mult(vect.Perp(r1), a.w))
return vect.Sub(v1, v2)
}
func (aabb *AABB) Perimeter() float32 {
w := vect.Sub(aabb.Upper, aabb.Lower)
return 2 * (w.X + w.Y)
}
func (aabb *AABB) Extents() vect.Vect {
return vect.Mult(vect.Sub(aabb.Upper, aabb.Lower), .5)
}
// Returns true if the given point is located inside the circle.
func (circle *CircleShape) TestPoint(point vect.Vect) bool {
d := vect.Sub(point, circle.Tc)
return vect.Dot(d, d) <= circle.Radius*circle.Radius
}