Beispiel #1
0
func (dev *vxlanDevice) AddL2(n neigh) error {
	log.Infof("calling NeighAdd: %v, %v", n.IP, n.MAC)
	return netlink.NeighAdd(&netlink.Neigh{
		LinkIndex:    dev.link.Index,
		State:        netlink.NUD_PERMANENT,
		Family:       syscall.AF_BRIDGE,
		Flags:        netlink.NTF_SELF,
		IP:           n.IP.ToIP(),
		HardwareAddr: n.MAC,
	})
}
Beispiel #2
0
func (d *driver) CreateEndpoint(nid, eid string, ifInfo driverapi.InterfaceInfo, epOptions map[string]interface{}) error {
	defer osl.InitOSContext()()

	if ifInfo == nil {
		return errors.New("invalid interface info passed")
	}

	// Get the network handler and make sure it exists
	d.Lock()
	n, ok := d.networks[nid]
	dconfig := d.config
	d.Unlock()

	if !ok {
		return types.NotFoundErrorf("network %s does not exist", nid)
	}
	if n == nil {
		return driverapi.ErrNoNetwork(nid)
	}

	// Sanity check
	n.Lock()
	if n.id != nid {
		n.Unlock()
		return InvalidNetworkIDError(nid)
	}
	n.Unlock()

	// Check if endpoint id is good and retrieve correspondent endpoint
	ep, err := n.getEndpoint(eid)
	if err != nil {
		return err
	}

	// Endpoint with that id exists either on desired or other sandbox
	if ep != nil {
		return driverapi.ErrEndpointExists(eid)
	}

	// Try to convert the options to endpoint configuration
	epConfig, err := parseEndpointOptions(epOptions)
	if err != nil {
		return err
	}

	// Create and add the endpoint
	n.Lock()
	endpoint := &bridgeEndpoint{id: eid, config: epConfig}
	n.endpoints[eid] = endpoint
	n.Unlock()

	// On failure make sure to remove the endpoint
	defer func() {
		if err != nil {
			n.Lock()
			delete(n.endpoints, eid)
			n.Unlock()
		}
	}()

	// Generate a name for what will be the host side pipe interface
	hostIfName, err := netutils.GenerateIfaceName(vethPrefix, vethLen)
	if err != nil {
		return err
	}

	// Generate a name for what will be the sandbox side pipe interface
	containerIfName, err := netutils.GenerateIfaceName(vethPrefix, vethLen)
	if err != nil {
		return err
	}

	// Generate and add the interface pipe host <-> sandbox
	veth := &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: hostIfName, TxQLen: 0},
		PeerName:  containerIfName}
	if err = netlink.LinkAdd(veth); err != nil {
		return types.InternalErrorf("failed to add the host (%s) <=> sandbox (%s) pair interfaces: %v", hostIfName, containerIfName, err)
	}

	// Get the host side pipe interface handler
	host, err := netlink.LinkByName(hostIfName)
	if err != nil {
		return types.InternalErrorf("failed to find host side interface %s: %v", hostIfName, err)
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(host)
		}
	}()

	// Get the sandbox side pipe interface handler
	sbox, err := netlink.LinkByName(containerIfName)
	if err != nil {
		return types.InternalErrorf("failed to find sandbox side interface %s: %v", containerIfName, err)
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(sbox)
		}
	}()

	n.Lock()
	config := n.config
	n.Unlock()

	// Add bridge inherited attributes to pipe interfaces
	if config.Mtu != 0 {
		err = netlink.LinkSetMTU(host, config.Mtu)
		if err != nil {
			return types.InternalErrorf("failed to set MTU on host interface %s: %v", hostIfName, err)
		}
		err = netlink.LinkSetMTU(sbox, config.Mtu)
		if err != nil {
			return types.InternalErrorf("failed to set MTU on sandbox interface %s: %v", containerIfName, err)
		}
	}

	// Attach host side pipe interface into the bridge
	if err = addToBridge(hostIfName, config.BridgeName); err != nil {
		return fmt.Errorf("adding interface %s to bridge %s failed: %v", hostIfName, config.BridgeName, err)
	}

	if !dconfig.EnableUserlandProxy {
		err = setHairpinMode(host, true)
		if err != nil {
			return err
		}
	}

	// Create the sandbox side pipe interface
	endpoint.srcName = containerIfName
	endpoint.macAddress = ifInfo.MacAddress()
	endpoint.addr = ifInfo.Address()
	endpoint.addrv6 = ifInfo.AddressIPv6()

	// Down the interface before configuring mac address.
	if err = netlink.LinkSetDown(sbox); err != nil {
		return fmt.Errorf("could not set link down for container interface %s: %v", containerIfName, err)
	}

	// Set the sbox's MAC. If specified, use the one configured by user, otherwise generate one based on IP.
	if endpoint.macAddress == nil {
		endpoint.macAddress = electMacAddress(epConfig, endpoint.addr.IP)
		if err := ifInfo.SetMacAddress(endpoint.macAddress); err != nil {
			return err
		}
	}
	err = netlink.LinkSetHardwareAddr(sbox, endpoint.macAddress)
	if err != nil {
		return fmt.Errorf("could not set mac address for container interface %s: %v", containerIfName, err)
	}

	// Up the host interface after finishing all netlink configuration
	if err = netlink.LinkSetUp(host); err != nil {
		return fmt.Errorf("could not set link up for host interface %s: %v", hostIfName, err)
	}

	if endpoint.addrv6 == nil && config.EnableIPv6 {
		var ip6 net.IP
		network := n.bridge.bridgeIPv6
		if config.AddressIPv6 != nil {
			network = config.AddressIPv6
		}

		ones, _ := network.Mask.Size()
		if ones > 80 {
			err = types.ForbiddenErrorf("Cannot self generate an IPv6 address on network %v: At least 48 host bits are needed.", network)
			return err
		}

		ip6 = make(net.IP, len(network.IP))
		copy(ip6, network.IP)
		for i, h := range endpoint.macAddress {
			ip6[i+10] = h
		}

		endpoint.addrv6 = &net.IPNet{IP: ip6, Mask: network.Mask}
		if err := ifInfo.SetIPAddress(endpoint.addrv6); err != nil {
			return err
		}
	}

	// Add a neighbor proxy if using NDP proxying
	if config.NDPProxyInterface != "" && config.EnableIPv6 {
		link, err := netlink.LinkByName(config.NDPProxyInterface)
		if err != nil {
			return err
		}
		neighbor := netlink.Neigh{
			LinkIndex:    link.Attrs().Index,
			Family:       netlink.FAMILY_V6,
			State:        netlink.NUD_PERMANENT,
			Type:         netlink.NDA_UNSPEC,
			Flags:        netlink.NTF_PROXY,
			IP:           endpoint.addrv6.IP,
			HardwareAddr: endpoint.macAddress,
		}
		if err := netlink.NeighAdd(&neighbor); err != nil {
			logrus.Warnf("could not add the neighbor proxy: %v", err)
			return err
		}

		if endpoint.config != nil {
			for _, port := range endpoint.config.ExposedPorts {
				insert := []string{
					string(iptables.Insert),
					DockerChain,
					"-p", port.Proto.String(),
					"-d", endpoint.addrv6.String(),
					"--dport", strconv.Itoa(int(port.Port)),
					"-j", "ACCEPT",
				}
				iptables.Raw(iptables.IP6Tables, insert...)
			}
		}
	}

	// Program any required port mapping and store them in the endpoint
	endpoint.portMapping, err = n.allocatePorts(epConfig, endpoint, config.DefaultBindingIP, d.config.EnableUserlandProxy)
	if err != nil {
		return err
	}

	return nil
}