Beispiel #1
0
func fakeExecServer(t *testing.T, i int, stdinData, stdoutData, stderrData, errorData string, tty bool) http.HandlerFunc {
	// error + stdin + stdout
	expectedStreams := 3
	if !tty {
		// stderr
		expectedStreams++
	}

	return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
		streamCh := make(chan httpstream.Stream)

		upgrader := spdy.NewResponseUpgrader()
		conn := upgrader.UpgradeResponse(w, req, func(stream httpstream.Stream) error {
			streamCh <- stream
			return nil
		})
		// from this point on, we can no longer call methods on w
		if conn == nil {
			// The upgrader is responsible for notifying the client of any errors that
			// occurred during upgrading. All we can do is return here at this point
			// if we weren't successful in upgrading.
			return
		}
		defer conn.Close()

		var errorStream, stdinStream, stdoutStream, stderrStream httpstream.Stream
		receivedStreams := 0
	WaitForStreams:
		for {
			select {
			case stream := <-streamCh:
				streamType := stream.Headers().Get(api.StreamType)
				switch streamType {
				case api.StreamTypeError:
					errorStream = stream
					receivedStreams++
				case api.StreamTypeStdin:
					stdinStream = stream
					stdinStream.Close()
					receivedStreams++
				case api.StreamTypeStdout:
					stdoutStream = stream
					receivedStreams++
				case api.StreamTypeStderr:
					stderrStream = stream
					receivedStreams++
				default:
					t.Errorf("%d: unexpected stream type: %q", i, streamType)
				}

				defer stream.Reset()

				if receivedStreams == expectedStreams {
					break WaitForStreams
				}
			}
		}

		if len(errorData) > 0 {
			fmt.Fprint(errorStream, errorData)
			errorStream.Close()
		}

		if len(stdoutData) > 0 {
			fmt.Fprint(stdoutStream, stdoutData)
			stdoutStream.Close()
		}
		if len(stderrData) > 0 {
			fmt.Fprint(stderrStream, stderrData)
			stderrStream.Close()
		}
		if len(stdinData) > 0 {
			data, err := ioutil.ReadAll(stdinStream)
			if err != nil {
				t.Errorf("%d: error reading stdin stream: %v", i, err)
			}
			if e, a := stdinData, string(data); e != a {
				t.Errorf("%d: stdin: expected %q, got %q", i, e, a)
			}
		}
	})
}
Beispiel #2
0
func (s *Server) createStreams(request *restful.Request, response *restful.Response) (io.Reader, io.WriteCloser, io.WriteCloser, io.WriteCloser, httpstream.Connection, bool, bool) {
	// start at 1 for error stream
	expectedStreams := 1
	if request.QueryParameter(api.ExecStdinParam) == "1" {
		expectedStreams++
	}
	if request.QueryParameter(api.ExecStdoutParam) == "1" {
		expectedStreams++
	}
	tty := request.QueryParameter(api.ExecTTYParam) == "1"
	if !tty && request.QueryParameter(api.ExecStderrParam) == "1" {
		expectedStreams++
	}

	if expectedStreams == 1 {
		response.WriteError(http.StatusBadRequest, fmt.Errorf("you must specify at least 1 of stdin, stdout, stderr"))
		return nil, nil, nil, nil, nil, false, false
	}

	streamCh := make(chan httpstream.Stream)

	upgrader := spdy.NewResponseUpgrader()
	conn := upgrader.UpgradeResponse(response.ResponseWriter, request.Request, func(stream httpstream.Stream) error {
		streamCh <- stream
		return nil
	})
	// from this point on, we can no longer call methods on response
	if conn == nil {
		// The upgrader is responsible for notifying the client of any errors that
		// occurred during upgrading. All we can do is return here at this point
		// if we weren't successful in upgrading.
		return nil, nil, nil, nil, nil, false, false
	}

	conn.SetIdleTimeout(s.host.StreamingConnectionIdleTimeout())

	// TODO make it configurable?
	expired := time.NewTimer(streamCreationTimeout)

	var errorStream, stdinStream, stdoutStream, stderrStream httpstream.Stream
	receivedStreams := 0
WaitForStreams:
	for {
		select {
		case stream := <-streamCh:
			streamType := stream.Headers().Get(api.StreamType)
			switch streamType {
			case api.StreamTypeError:
				errorStream = stream
				defer errorStream.Reset()
				receivedStreams++
			case api.StreamTypeStdin:
				stdinStream = stream
				receivedStreams++
			case api.StreamTypeStdout:
				stdoutStream = stream
				receivedStreams++
			case api.StreamTypeStderr:
				stderrStream = stream
				receivedStreams++
			default:
				glog.Errorf("Unexpected stream type: '%s'", streamType)
			}
			if receivedStreams == expectedStreams {
				break WaitForStreams
			}
		case <-expired.C:
			// TODO find a way to return the error to the user. Maybe use a separate
			// stream to report errors?
			glog.Error("Timed out waiting for client to create streams")
			return nil, nil, nil, nil, nil, false, false
		}
	}

	if stdinStream != nil {
		// close our half of the input stream, since we won't be writing to it
		stdinStream.Close()
	}

	return stdinStream, stdoutStream, stderrStream, errorStream, conn, tty, true
}
Beispiel #3
0
func fakeExecServer(t *testing.T, i int, stdinData, stdoutData, stderrData, errorData string, tty bool, messageCount int) http.HandlerFunc {
	// error + stdin + stdout
	expectedStreams := 3
	if !tty {
		// stderr
		expectedStreams++
	}

	return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
		protocol, err := httpstream.Handshake(req, w, []string{StreamProtocolV2Name}, StreamProtocolV1Name)
		if err != nil {
			t.Fatal(err)
		}
		if protocol != StreamProtocolV2Name {
			t.Fatalf("unexpected protocol: %s", protocol)
		}
		streamCh := make(chan streamAndReply)

		upgrader := spdy.NewResponseUpgrader()
		conn := upgrader.UpgradeResponse(w, req, func(stream httpstream.Stream, replySent <-chan struct{}) error {
			streamCh <- streamAndReply{Stream: stream, replySent: replySent}
			return nil
		})
		// from this point on, we can no longer call methods on w
		if conn == nil {
			// The upgrader is responsible for notifying the client of any errors that
			// occurred during upgrading. All we can do is return here at this point
			// if we weren't successful in upgrading.
			return
		}
		defer conn.Close()

		var errorStream, stdinStream, stdoutStream, stderrStream httpstream.Stream
		receivedStreams := 0
		replyChan := make(chan struct{})
		stop := make(chan struct{})
		defer close(stop)
	WaitForStreams:
		for {
			select {
			case stream := <-streamCh:
				streamType := stream.Headers().Get(api.StreamType)
				switch streamType {
				case api.StreamTypeError:
					errorStream = stream
					go waitStreamReply(stream.replySent, replyChan, stop)
				case api.StreamTypeStdin:
					stdinStream = stream
					go waitStreamReply(stream.replySent, replyChan, stop)
				case api.StreamTypeStdout:
					stdoutStream = stream
					go waitStreamReply(stream.replySent, replyChan, stop)
				case api.StreamTypeStderr:
					stderrStream = stream
					go waitStreamReply(stream.replySent, replyChan, stop)
				default:
					t.Errorf("%d: unexpected stream type: %q", i, streamType)
				}

				if receivedStreams == expectedStreams {
					break WaitForStreams
				}
			case <-replyChan:
				receivedStreams++
				if receivedStreams == expectedStreams {
					break WaitForStreams
				}
			}
		}

		if len(errorData) > 0 {
			n, err := fmt.Fprint(errorStream, errorData)
			if err != nil {
				t.Errorf("%d: error writing to errorStream: %v", i, err)
			}
			if e, a := len(errorData), n; e != a {
				t.Errorf("%d: expected to write %d bytes to errorStream, but only wrote %d", i, e, a)
			}
			errorStream.Close()
		}

		if len(stdoutData) > 0 {
			for j := 0; j < messageCount; j++ {
				n, err := fmt.Fprint(stdoutStream, stdoutData)
				if err != nil {
					t.Errorf("%d: error writing to stdoutStream: %v", i, err)
				}
				if e, a := len(stdoutData), n; e != a {
					t.Errorf("%d: expected to write %d bytes to stdoutStream, but only wrote %d", i, e, a)
				}
			}
			stdoutStream.Close()
		}
		if len(stderrData) > 0 {
			for j := 0; j < messageCount; j++ {
				n, err := fmt.Fprint(stderrStream, stderrData)
				if err != nil {
					t.Errorf("%d: error writing to stderrStream: %v", i, err)
				}
				if e, a := len(stderrData), n; e != a {
					t.Errorf("%d: expected to write %d bytes to stderrStream, but only wrote %d", i, e, a)
				}
			}
			stderrStream.Close()
		}
		if len(stdinData) > 0 {
			data := make([]byte, len(stdinData))
			for j := 0; j < messageCount; j++ {
				n, err := io.ReadFull(stdinStream, data)
				if err != nil {
					t.Errorf("%d: error reading stdin stream: %v", i, err)
				}
				if e, a := len(stdinData), n; e != a {
					t.Errorf("%d: expected to read %d bytes from stdinStream, but only read %d", i, e, a)
				}
				if e, a := stdinData, string(data); e != a {
					t.Errorf("%d: stdin: expected %q, got %q", i, e, a)
				}
			}
			stdinStream.Close()
		}
	})
}
Beispiel #4
0
func (e *streamProtocolV2) stream(conn httpstream.Connection) error {
	var (
		err                                                  error
		errorStream, remoteStdin, remoteStdout, remoteStderr httpstream.Stream
	)

	headers := http.Header{}

	// set up all the streams first
	// set up error stream
	errorChan := make(chan error)
	headers.Set(api.StreamType, api.StreamTypeError)
	errorStream, err = conn.CreateStream(headers)
	if err != nil {
		return err
	}

	// set up stdin stream
	if e.stdin != nil {
		headers.Set(api.StreamType, api.StreamTypeStdin)
		remoteStdin, err = conn.CreateStream(headers)
		if err != nil {
			return err
		}
	}

	// set up stdout stream
	if e.stdout != nil {
		headers.Set(api.StreamType, api.StreamTypeStdout)
		remoteStdout, err = conn.CreateStream(headers)
		if err != nil {
			return err
		}
	}

	// set up stderr stream
	if e.stderr != nil && !e.tty {
		headers.Set(api.StreamType, api.StreamTypeStderr)
		remoteStderr, err = conn.CreateStream(headers)
		if err != nil {
			return err
		}
	}

	// now that all the streams have been created, proceed with reading & copying

	// always read from errorStream
	go func() {
		message, err := ioutil.ReadAll(errorStream)
		switch {
		case err != nil && err != io.EOF:
			errorChan <- fmt.Errorf("error reading from error stream: %s", err)
		case len(message) > 0:
			errorChan <- fmt.Errorf("error executing remote command: %s", message)
		default:
			errorChan <- nil
		}
		close(errorChan)
	}()

	var wg sync.WaitGroup
	var once sync.Once

	if e.stdin != nil {
		// copy from client's stdin to container's stdin
		go func() {
			// if e.stdin is noninteractive, e.g. `echo abc | kubectl exec -i <pod> -- cat`, make sure
			// we close remoteStdin as soon as the copy from e.stdin to remoteStdin finishes. Otherwise
			// the executed command will remain running.
			defer once.Do(func() { remoteStdin.Close() })

			if _, err := io.Copy(remoteStdin, e.stdin); err != nil {
				runtime.HandleError(err)
			}
		}()

		// read from remoteStdin until the stream is closed. this is essential to
		// be able to exit interactive sessions cleanly and not leak goroutines or
		// hang the client's terminal.
		//
		// go-dockerclient's current hijack implementation
		// (https://github.com/fsouza/go-dockerclient/blob/89f3d56d93788dfe85f864a44f85d9738fca0670/client.go#L564)
		// waits for all three streams (stdin/stdout/stderr) to finish copying
		// before returning. When hijack finishes copying stdout/stderr, it calls
		// Close() on its side of remoteStdin, which allows this copy to complete.
		// When that happens, we must Close() on our side of remoteStdin, to
		// allow the copy in hijack to complete, and hijack to return.
		go func() {
			defer once.Do(func() { remoteStdin.Close() })
			// this "copy" doesn't actually read anything - it's just here to wait for
			// the server to close remoteStdin.
			if _, err := io.Copy(ioutil.Discard, remoteStdin); err != nil {
				runtime.HandleError(err)
			}
		}()
	}

	if e.stdout != nil {
		wg.Add(1)
		go func() {
			defer wg.Done()
			if _, err := io.Copy(e.stdout, remoteStdout); err != nil {
				runtime.HandleError(err)
			}
		}()
	}

	if e.stderr != nil && !e.tty {
		wg.Add(1)
		go func() {
			defer wg.Done()
			if _, err := io.Copy(e.stderr, remoteStderr); err != nil {
				runtime.HandleError(err)
			}
		}()
	}

	// we're waiting for stdout/stderr to finish copying
	wg.Wait()

	// waits for errorStream to finish reading with an error or nil
	return <-errorChan
}