func Prog(as int) *obj.Prog {
var p *obj.Prog
if as == obj.ADATA || as == obj.AGLOBL {
if ddumped != 0 {
Fatal("already dumped data")
}
if dpc == nil {
dpc = Ctxt.NewProg()
dfirst = dpc
}
p = dpc
dpc = Ctxt.NewProg()
p.Link = dpc
} else {
p = Pc
Pc = Ctxt.NewProg()
Clearp(Pc)
p.Link = Pc
}
if lineno == 0 {
if Debug['K'] != 0 {
Warn("prog: line 0")
}
}
p.As = int16(as)
p.Lineno = lineno
return p
}
// Called after regopt and peep have run.
// Expand CHECKNIL pseudo-op into actual nil pointer check.
func expandchecks(firstp *obj.Prog) {
var p1 *obj.Prog
var p2 *obj.Prog
for p := firstp; p != nil; p = p.Link {
if p.As != obj.ACHECKNIL {
continue
}
if gc.Debug_checknil != 0 && p.Lineno > 1 { // p->lineno==1 in generated wrappers
gc.Warnl(int(p.Lineno), "generated nil check")
}
// check is
// CMP arg, $0
// JNE 2(PC) (likely)
// MOV AX, 0
p1 = gc.Ctxt.NewProg()
p2 = gc.Ctxt.NewProg()
gc.Clearp(p1)
gc.Clearp(p2)
p1.Link = p2
p2.Link = p.Link
p.Link = p1
p1.Lineno = p.Lineno
p2.Lineno = p.Lineno
p1.Pc = 9999
p2.Pc = 9999
p.As = int16(cmpptr)
p.To.Type = obj.TYPE_CONST
p.To.Offset = 0
p1.As = x86.AJNE
p1.From.Type = obj.TYPE_CONST
p1.From.Offset = 1 // likely
p1.To.Type = obj.TYPE_BRANCH
p1.To.Val = p2.Link
// crash by write to memory address 0.
// if possible, since we know arg is 0, use 0(arg),
// which will be shorter to encode than plain 0.
p2.As = x86.AMOVL
p2.From.Type = obj.TYPE_REG
p2.From.Reg = x86.REG_AX
if regtyp(&p.From) {
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = p.From.Reg
} else {
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = x86.REG_NONE
}
p2.To.Offset = 0
}
}
func appendpp(p *obj.Prog, as int, ftype int, freg int, foffset int64, ttype int, treg int, toffset int64) *obj.Prog {
q := gc.Ctxt.NewProg()
gc.Clearp(q)
q.As = int16(as)
q.Lineno = p.Lineno
q.From.Type = int16(ftype)
q.From.Reg = int16(freg)
q.From.Offset = foffset
q.To.Type = int16(ttype)
q.To.Reg = int16(treg)
q.To.Offset = toffset
q.Link = p.Link
p.Link = q
return q
}
func progedit(ctxt *obj.Link, p *obj.Prog) {
// Maintain information about code generation mode.
if ctxt.Mode == 0 {
ctxt.Mode = ctxt.Arch.Regsize * 8
}
p.Mode = int8(ctxt.Mode)
switch p.As {
case AMODE:
if p.From.Type == obj.TYPE_CONST || (p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_NONE) {
switch int(p.From.Offset) {
case 16, 32, 64:
ctxt.Mode = int(p.From.Offset)
}
}
obj.Nopout(p)
}
// Thread-local storage references use the TLS pseudo-register.
// As a register, TLS refers to the thread-local storage base, and it
// can only be loaded into another register:
//
// MOVQ TLS, AX
//
// An offset from the thread-local storage base is written off(reg)(TLS*1).
// Semantically it is off(reg), but the (TLS*1) annotation marks this as
// indexing from the loaded TLS base. This emits a relocation so that
// if the linker needs to adjust the offset, it can. For example:
//
// MOVQ TLS, AX
// MOVQ 0(AX)(TLS*1), CX // load g into CX
//
// On systems that support direct access to the TLS memory, this
// pair of instructions can be reduced to a direct TLS memory reference:
//
// MOVQ 0(TLS), CX // load g into CX
//
// The 2-instruction and 1-instruction forms correspond to the two code
// sequences for loading a TLS variable in the local exec model given in "ELF
// Handling For Thread-Local Storage".
//
// We apply this rewrite on systems that support the 1-instruction form.
// The decision is made using only the operating system and the -shared flag,
// not the link mode. If some link modes on a particular operating system
// require the 2-instruction form, then all builds for that operating system
// will use the 2-instruction form, so that the link mode decision can be
// delayed to link time.
//
// In this way, all supported systems use identical instructions to
// access TLS, and they are rewritten appropriately first here in
// liblink and then finally using relocations in the linker.
//
// When -shared is passed, we leave the code in the 2-instruction form but
// assemble (and relocate) them in different ways to generate the initial
// exec code sequence. It's a bit of a fluke that this is possible without
// rewriting the instructions more comprehensively, and it only does because
// we only support a single TLS variable (g).
if canuse1insntls(ctxt) {
// Reduce 2-instruction sequence to 1-instruction sequence.
// Sequences like
// MOVQ TLS, BX
// ... off(BX)(TLS*1) ...
// become
// NOP
// ... off(TLS) ...
//
// TODO(rsc): Remove the Hsolaris special case. It exists only to
// guarantee we are producing byte-identical binaries as before this code.
// But it should be unnecessary.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_REG && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 && ctxt.Headtype != obj.Hsolaris {
obj.Nopout(p)
}
if p.From.Type == obj.TYPE_MEM && p.From.Index == REG_TLS && REG_AX <= p.From.Reg && p.From.Reg <= REG_R15 {
p.From.Reg = REG_TLS
p.From.Scale = 0
p.From.Index = REG_NONE
}
if p.To.Type == obj.TYPE_MEM && p.To.Index == REG_TLS && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
p.To.Reg = REG_TLS
p.To.Scale = 0
p.To.Index = REG_NONE
}
} else {
// load_g_cx, below, always inserts the 1-instruction sequence. Rewrite it
// as the 2-instruction sequence if necessary.
// MOVQ 0(TLS), BX
// becomes
// MOVQ TLS, BX
// MOVQ 0(BX)(TLS*1), BX
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
q := obj.Appendp(ctxt, p)
q.As = p.As
q.From = p.From
q.From.Type = obj.TYPE_MEM
q.From.Reg = p.To.Reg
q.From.Index = REG_TLS
q.From.Scale = 2 // TODO: use 1
q.To = p.To
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_TLS
p.From.Index = REG_NONE
p.From.Offset = 0
}
}
// TODO: Remove.
if ctxt.Headtype == obj.Hwindows && p.Mode == 64 || ctxt.Headtype == obj.Hplan9 {
if p.From.Scale == 1 && p.From.Index == REG_TLS {
p.From.Scale = 2
}
if p.To.Scale == 1 && p.To.Index == REG_TLS {
p.To.Scale = 2
}
}
// Rewrite 0 to $0 in 3rd argment to CMPPS etc.
// That's what the tables expect.
switch p.As {
case ACMPPD, ACMPPS, ACMPSD, ACMPSS:
if p.To.Type == obj.TYPE_MEM && p.To.Name == obj.NAME_NONE && p.To.Reg == REG_NONE && p.To.Index == REG_NONE && p.To.Sym == nil {
p.To.Type = obj.TYPE_CONST
}
}
// Rewrite CALL/JMP/RET to symbol as TYPE_BRANCH.
switch p.As {
case obj.ACALL, obj.AJMP, obj.ARET:
if p.To.Type == obj.TYPE_MEM && (p.To.Name == obj.NAME_EXTERN || p.To.Name == obj.NAME_STATIC) && p.To.Sym != nil {
p.To.Type = obj.TYPE_BRANCH
}
}
// Rewrite MOVL/MOVQ $XXX(FP/SP) as LEAL/LEAQ.
if p.From.Type == obj.TYPE_ADDR && (ctxt.Arch.Thechar == '6' || p.From.Name != obj.NAME_EXTERN && p.From.Name != obj.NAME_STATIC) {
switch p.As {
case AMOVL:
p.As = ALEAL
p.From.Type = obj.TYPE_MEM
case AMOVQ:
p.As = ALEAQ
p.From.Type = obj.TYPE_MEM
}
}
if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
nacladdr(ctxt, p, &p.From3)
nacladdr(ctxt, p, &p.From)
nacladdr(ctxt, p, &p.To)
}
// Rewrite float constants to values stored in memory.
switch p.As {
// Convert AMOVSS $(0), Xx to AXORPS Xx, Xx
case AMOVSS:
if p.From.Type == obj.TYPE_FCONST {
if p.From.Val.(float64) == 0 {
if p.To.Type == obj.TYPE_REG && REG_X0 <= p.To.Reg && p.To.Reg <= REG_X15 {
p.As = AXORPS
p.From = p.To
break
}
}
}
fallthrough
case AFMOVF,
AFADDF,
AFSUBF,
AFSUBRF,
AFMULF,
AFDIVF,
AFDIVRF,
AFCOMF,
AFCOMFP,
AADDSS,
ASUBSS,
AMULSS,
ADIVSS,
ACOMISS,
AUCOMISS:
if p.From.Type == obj.TYPE_FCONST {
f32 := float32(p.From.Val.(float64))
i32 := math.Float32bits(f32)
literal := fmt.Sprintf("$f32.%08x", i32)
s := obj.Linklookup(ctxt, literal, 0)
if s.Type == 0 {
s.Type = obj.SRODATA
obj.Adduint32(ctxt, s, i32)
}
p.From.Type = obj.TYPE_MEM
p.From.Name = obj.NAME_EXTERN
p.From.Sym = s
p.From.Sym.Local = true
p.From.Offset = 0
}
case AMOVSD:
// Convert AMOVSD $(0), Xx to AXORPS Xx, Xx
if p.From.Type == obj.TYPE_FCONST {
if p.From.Val.(float64) == 0 {
if p.To.Type == obj.TYPE_REG && REG_X0 <= p.To.Reg && p.To.Reg <= REG_X15 {
p.As = AXORPS
p.From = p.To
break
}
}
}
fallthrough
case AFMOVD,
AFADDD,
AFSUBD,
AFSUBRD,
AFMULD,
AFDIVD,
AFDIVRD,
AFCOMD,
AFCOMDP,
AADDSD,
ASUBSD,
AMULSD,
ADIVSD,
ACOMISD,
AUCOMISD:
if p.From.Type == obj.TYPE_FCONST {
i64 := math.Float64bits(p.From.Val.(float64))
literal := fmt.Sprintf("$f64.%016x", i64)
s := obj.Linklookup(ctxt, literal, 0)
if s.Type == 0 {
s.Type = obj.SRODATA
obj.Adduint64(ctxt, s, i64)
}
p.From.Type = obj.TYPE_MEM
p.From.Name = obj.NAME_EXTERN
p.From.Sym = s
p.From.Sym.Local = true
p.From.Offset = 0
}
}
if ctxt.Flag_dynlink && (p.As == obj.ADUFFCOPY || p.As == obj.ADUFFZERO) {
var sym *obj.LSym
if p.As == obj.ADUFFZERO {
sym = obj.Linklookup(ctxt, "runtime.duffzero", 0)
} else {
sym = obj.Linklookup(ctxt, "runtime.duffcopy", 0)
}
offset := p.To.Offset
p.As = AMOVQ
p.From.Type = obj.TYPE_MEM
p.From.Name = obj.NAME_GOTREF
p.From.Sym = sym
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_R15
p.To.Offset = 0
p.To.Sym = nil
p1 := obj.Appendp(ctxt, p)
p1.As = AADDQ
p1.From.Type = obj.TYPE_CONST
p1.From.Offset = offset
p1.To.Type = obj.TYPE_REG
p1.To.Reg = REG_R15
p2 := obj.Appendp(ctxt, p1)
p2.As = obj.ACALL
p2.To.Type = obj.TYPE_REG
p2.To.Reg = REG_R15
}
if ctxt.Flag_dynlink {
if p.As == ALEAQ && p.From.Type == obj.TYPE_MEM && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
p.As = AMOVQ
p.From.Type = obj.TYPE_ADDR
}
if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
if p.As != AMOVQ {
ctxt.Diag("do not know how to handle TYPE_ADDR in %v with -dynlink", p)
}
if p.To.Type != obj.TYPE_REG {
ctxt.Diag("do not know how to handle LEAQ-type insn to non-register in %v with -dynlink", p)
}
p.From.Type = obj.TYPE_MEM
p.From.Name = obj.NAME_GOTREF
if p.From.Offset != 0 {
q := obj.Appendp(ctxt, p)
q.As = AADDQ
q.From.Type = obj.TYPE_CONST
q.From.Offset = p.From.Offset
q.To = p.To
p.From.Offset = 0
}
}
if p.From3.Name == obj.NAME_EXTERN {
ctxt.Diag("don't know how to handle %v with -dynlink", p)
}
if p.To2.Name == obj.NAME_EXTERN {
ctxt.Diag("don't know how to handle %v with -dynlink", p)
}
var source *obj.Addr
if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
}
source = &p.From
} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
source = &p.To
} else {
return
}
if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
return
}
if source.Type != obj.TYPE_MEM {
ctxt.Diag("don't know how to handle %v with -dynlink", p)
}
p1 := obj.Appendp(ctxt, p)
p2 := obj.Appendp(ctxt, p1)
p1.As = AMOVQ
p1.From.Type = obj.TYPE_MEM
p1.From.Sym = source.Sym
p1.From.Name = obj.NAME_GOTREF
p1.To.Type = obj.TYPE_REG
p1.To.Reg = REG_R15
p2.As = p.As
p2.From = p.From
p2.To = p.To
if p.From.Name == obj.NAME_EXTERN {
p2.From.Reg = REG_R15
p2.From.Name = obj.NAME_NONE
p2.From.Sym = nil
} else if p.To.Name == obj.NAME_EXTERN {
p2.To.Reg = REG_R15
p2.To.Name = obj.NAME_NONE
p2.To.Sym = nil
} else {
return
}
l := p.Link
l2 := p2.Link
*p = *p1
*p1 = *p2
p.Link = l
p1.Link = l2
}
}
func preprocess(ctxt *obj.Link, cursym *obj.LSym) {
if ctxt.Tlsg == nil {
ctxt.Tlsg = obj.Linklookup(ctxt, "runtime.tlsg", 0)
}
if ctxt.Symmorestack[0] == nil {
ctxt.Symmorestack[0] = obj.Linklookup(ctxt, "runtime.morestack", 0)
ctxt.Symmorestack[1] = obj.Linklookup(ctxt, "runtime.morestack_noctxt", 0)
}
if ctxt.Headtype == obj.Hplan9 && ctxt.Plan9privates == nil {
ctxt.Plan9privates = obj.Linklookup(ctxt, "_privates", 0)
}
ctxt.Cursym = cursym
if cursym.Text == nil || cursym.Text.Link == nil {
return
}
p := cursym.Text
autoffset := int32(p.To.Offset)
if autoffset < 0 {
autoffset = 0
}
var bpsize int
if p.Mode == 64 && obj.Framepointer_enabled != 0 && autoffset > 0 {
// Make room for to save a base pointer. If autoffset == 0,
// this might do something special like a tail jump to
// another function, so in that case we omit this.
bpsize = ctxt.Arch.Ptrsize
autoffset += int32(bpsize)
p.To.Offset += int64(bpsize)
} else {
bpsize = 0
}
textarg := int64(p.To.Val.(int32))
cursym.Args = int32(textarg)
cursym.Locals = int32(p.To.Offset)
// TODO(rsc): Remove.
if p.Mode == 32 && cursym.Locals < 0 {
cursym.Locals = 0
}
// TODO(rsc): Remove 'p.Mode == 64 &&'.
if p.Mode == 64 && autoffset < obj.StackSmall && p.From3.Offset&obj.NOSPLIT == 0 {
for q := p; q != nil; q = q.Link {
if q.As == obj.ACALL {
goto noleaf
}
if (q.As == obj.ADUFFCOPY || q.As == obj.ADUFFZERO) && autoffset >= obj.StackSmall-8 {
goto noleaf
}
}
p.From3.Offset |= obj.NOSPLIT
noleaf:
}
if p.From3.Offset&obj.NOSPLIT == 0 || (p.From3.Offset&obj.WRAPPER != 0) {
p = obj.Appendp(ctxt, p)
p = load_g_cx(ctxt, p) // load g into CX
}
var q *obj.Prog
if cursym.Text.From3.Offset&obj.NOSPLIT == 0 {
p = stacksplit(ctxt, p, autoffset, int32(textarg), cursym.Text.From3.Offset&obj.NEEDCTXT == 0, &q) // emit split check
}
if autoffset != 0 {
if autoffset%int32(ctxt.Arch.Regsize) != 0 {
ctxt.Diag("unaligned stack size %d", autoffset)
}
p = obj.Appendp(ctxt, p)
p.As = AADJSP
p.From.Type = obj.TYPE_CONST
p.From.Offset = int64(autoffset)
p.Spadj = autoffset
} else {
// zero-byte stack adjustment.
// Insert a fake non-zero adjustment so that stkcheck can
// recognize the end of the stack-splitting prolog.
p = obj.Appendp(ctxt, p)
p.As = obj.ANOP
p.Spadj = int32(-ctxt.Arch.Ptrsize)
p = obj.Appendp(ctxt, p)
p.As = obj.ANOP
p.Spadj = int32(ctxt.Arch.Ptrsize)
}
if q != nil {
q.Pcond = p
}
deltasp := autoffset
if bpsize > 0 {
// Save caller's BP
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_BP
p.To.Type = obj.TYPE_MEM
p.To.Reg = REG_SP
p.To.Scale = 1
p.To.Offset = int64(autoffset) - int64(bpsize)
// Move current frame to BP
p = obj.Appendp(ctxt, p)
p.As = ALEAQ
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_SP
p.From.Scale = 1
p.From.Offset = int64(autoffset) - int64(bpsize)
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_BP
}
if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
//
// MOVQ g_panic(CX), BX
// TESTQ BX, BX
// JEQ end
// LEAQ (autoffset+8)(SP), DI
// CMPQ panic_argp(BX), DI
// JNE end
// MOVQ SP, panic_argp(BX)
// end:
// NOP
//
// The NOP is needed to give the jumps somewhere to land.
// It is a liblink NOP, not an x86 NOP: it encodes to 0 instruction bytes.
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_CX
p.From.Offset = 4 * int64(ctxt.Arch.Ptrsize) // G.panic
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_BX
if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
p.As = AMOVL
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_R15
p.From.Scale = 1
p.From.Index = REG_CX
}
if p.Mode == 32 {
p.As = AMOVL
}
p = obj.Appendp(ctxt, p)
p.As = ATESTQ
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_BX
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_BX
if ctxt.Headtype == obj.Hnacl || p.Mode == 32 {
p.As = ATESTL
}
p = obj.Appendp(ctxt, p)
p.As = AJEQ
p.To.Type = obj.TYPE_BRANCH
p1 := p
p = obj.Appendp(ctxt, p)
p.As = ALEAQ
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_SP
p.From.Offset = int64(autoffset) + int64(ctxt.Arch.Regsize)
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_DI
if ctxt.Headtype == obj.Hnacl || p.Mode == 32 {
p.As = ALEAL
}
p = obj.Appendp(ctxt, p)
p.As = ACMPQ
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_BX
p.From.Offset = 0 // Panic.argp
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_DI
if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
p.As = ACMPL
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_R15
p.From.Scale = 1
p.From.Index = REG_BX
}
if p.Mode == 32 {
p.As = ACMPL
}
p = obj.Appendp(ctxt, p)
p.As = AJNE
p.To.Type = obj.TYPE_BRANCH
p2 := p
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_SP
p.To.Type = obj.TYPE_MEM
p.To.Reg = REG_BX
p.To.Offset = 0 // Panic.argp
if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
p.As = AMOVL
p.To.Type = obj.TYPE_MEM
p.To.Reg = REG_R15
p.To.Scale = 1
p.To.Index = REG_BX
}
if p.Mode == 32 {
p.As = AMOVL
}
p = obj.Appendp(ctxt, p)
p.As = obj.ANOP
p1.Pcond = p
p2.Pcond = p
}
if ctxt.Debugzerostack != 0 && autoffset != 0 && cursym.Text.From3.Offset&obj.NOSPLIT == 0 {
// 6l -Z means zero the stack frame on entry.
// This slows down function calls but can help avoid
// false positives in garbage collection.
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_SP
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_DI
if p.Mode == 32 {
p.As = AMOVL
}
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_CONST
p.From.Offset = int64(autoffset) / int64(ctxt.Arch.Regsize)
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_CX
if p.Mode == 32 {
p.As = AMOVL
}
p = obj.Appendp(ctxt, p)
p.As = AMOVQ
p.From.Type = obj.TYPE_CONST
p.From.Offset = 0
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_AX
if p.Mode == 32 {
p.As = AMOVL
}
p = obj.Appendp(ctxt, p)
p.As = AREP
p = obj.Appendp(ctxt, p)
p.As = ASTOSQ
if p.Mode == 32 {
p.As = ASTOSL
}
}
var a int
var pcsize int
for ; p != nil; p = p.Link {
pcsize = int(p.Mode) / 8
a = int(p.From.Name)
if a == obj.NAME_AUTO {
p.From.Offset += int64(deltasp) - int64(bpsize)
}
if a == obj.NAME_PARAM {
p.From.Offset += int64(deltasp) + int64(pcsize)
}
a = int(p.From3.Name)
if a == obj.NAME_AUTO {
p.From3.Offset += int64(deltasp) - int64(bpsize)
}
if a == obj.NAME_PARAM {
p.From3.Offset += int64(deltasp) + int64(pcsize)
}
a = int(p.To.Name)
if a == obj.NAME_AUTO {
p.To.Offset += int64(deltasp) - int64(bpsize)
}
if a == obj.NAME_PARAM {
p.To.Offset += int64(deltasp) + int64(pcsize)
}
switch p.As {
default:
continue
case APUSHL, APUSHFL:
deltasp += 4
p.Spadj = 4
continue
case APUSHQ, APUSHFQ:
deltasp += 8
p.Spadj = 8
continue
case APUSHW, APUSHFW:
deltasp += 2
p.Spadj = 2
continue
case APOPL, APOPFL:
deltasp -= 4
p.Spadj = -4
continue
case APOPQ, APOPFQ:
deltasp -= 8
p.Spadj = -8
continue
case APOPW, APOPFW:
deltasp -= 2
p.Spadj = -2
continue
case obj.ARET:
break
}
if autoffset != deltasp {
ctxt.Diag("unbalanced PUSH/POP")
}
if autoffset != 0 {
if bpsize > 0 {
// Restore caller's BP
p.As = AMOVQ
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_SP
p.From.Scale = 1
p.From.Offset = int64(autoffset) - int64(bpsize)
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_BP
p = obj.Appendp(ctxt, p)
}
p.As = AADJSP
p.From.Type = obj.TYPE_CONST
p.From.Offset = int64(-autoffset)
p.Spadj = -autoffset
p = obj.Appendp(ctxt, p)
p.As = obj.ARET
// If there are instructions following
// this ARET, they come from a branch
// with the same stackframe, so undo
// the cleanup.
p.Spadj = +autoffset
}
if p.To.Sym != nil { // retjmp
p.As = obj.AJMP
}
}
}
func indir_cx(ctxt *obj.Link, p *obj.Prog, a *obj.Addr) {
if ctxt.Headtype == obj.Hnacl && p.Mode == 64 {
a.Type = obj.TYPE_MEM
a.Reg = REG_R15
a.Index = REG_CX
a.Scale = 1
return
}
a.Type = obj.TYPE_MEM
a.Reg = REG_CX
}
// Append code to p to load g into cx.
// Overwrites p with the first instruction (no first appendp).
// Overwriting p is unusual but it lets use this in both the
// prologue (caller must call appendp first) and in the epilogue.
// Returns last new instruction.
func load_g_cx(ctxt *obj.Link, p *obj.Prog) *obj.Prog {
p.As = AMOVQ
if ctxt.Arch.Ptrsize == 4 {
p.As = AMOVL
}
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_TLS
p.From.Offset = 0
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_CX
next := p.Link
progedit(ctxt, p)
for p.Link != next {
p = p.Link
}
if p.From.Index == REG_TLS {
p.From.Scale = 2
}
return p
}
// Append code to p to check for stack split.
// Appends to (does not overwrite) p.
// Assumes g is in CX.
// Returns last new instruction.
// On return, *jmpok is the instruction that should jump
// to the stack frame allocation if no split is needed.
func stacksplit(ctxt *obj.Link, p *obj.Prog, framesize int32, textarg int32, noctxt bool, jmpok **obj.Prog) *obj.Prog {
cmp := ACMPQ
lea := ALEAQ
mov := AMOVQ
sub := ASUBQ
if ctxt.Headtype == obj.Hnacl || p.Mode == 32 {
cmp = ACMPL
lea = ALEAL
mov = AMOVL
sub = ASUBL
}
var q1 *obj.Prog
if framesize <= obj.StackSmall {
// small stack: SP <= stackguard
// CMPQ SP, stackguard
p = obj.Appendp(ctxt, p)
p.As = int16(cmp)
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_SP
indir_cx(ctxt, p, &p.To)
p.To.Offset = 2 * int64(ctxt.Arch.Ptrsize) // G.stackguard0
if ctxt.Cursym.Cfunc != 0 {
p.To.Offset = 3 * int64(ctxt.Arch.Ptrsize) // G.stackguard1
}
} else if framesize <= obj.StackBig {
// large stack: SP-framesize <= stackguard-StackSmall
// LEAQ -xxx(SP), AX
// CMPQ AX, stackguard
p = obj.Appendp(ctxt, p)
p.As = int16(lea)
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_SP
p.From.Offset = -(int64(framesize) - obj.StackSmall)
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_AX
p = obj.Appendp(ctxt, p)
p.As = int16(cmp)
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_AX
indir_cx(ctxt, p, &p.To)
p.To.Offset = 2 * int64(ctxt.Arch.Ptrsize) // G.stackguard0
if ctxt.Cursym.Cfunc != 0 {
p.To.Offset = 3 * int64(ctxt.Arch.Ptrsize) // G.stackguard1
}
} else {
// Such a large stack we need to protect against wraparound.
// If SP is close to zero:
// SP-stackguard+StackGuard <= framesize + (StackGuard-StackSmall)
// The +StackGuard on both sides is required to keep the left side positive:
// SP is allowed to be slightly below stackguard. See stack.h.
//
// Preemption sets stackguard to StackPreempt, a very large value.
// That breaks the math above, so we have to check for that explicitly.
// MOVQ stackguard, CX
// CMPQ CX, $StackPreempt
// JEQ label-of-call-to-morestack
// LEAQ StackGuard(SP), AX
// SUBQ CX, AX
// CMPQ AX, $(framesize+(StackGuard-StackSmall))
p = obj.Appendp(ctxt, p)
p.As = int16(mov)
indir_cx(ctxt, p, &p.From)
p.From.Offset = 2 * int64(ctxt.Arch.Ptrsize) // G.stackguard0
if ctxt.Cursym.Cfunc != 0 {
p.From.Offset = 3 * int64(ctxt.Arch.Ptrsize) // G.stackguard1
}
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_SI
p = obj.Appendp(ctxt, p)
p.As = int16(cmp)
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_SI
p.To.Type = obj.TYPE_CONST
p.To.Offset = obj.StackPreempt
if p.Mode == 32 {
p.To.Offset = int64(uint32(obj.StackPreempt & (1<<32 - 1)))
}
p = obj.Appendp(ctxt, p)
p.As = AJEQ
p.To.Type = obj.TYPE_BRANCH
q1 = p
p = obj.Appendp(ctxt, p)
p.As = int16(lea)
p.From.Type = obj.TYPE_MEM
p.From.Reg = REG_SP
p.From.Offset = obj.StackGuard
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_AX
p = obj.Appendp(ctxt, p)
p.As = int16(sub)
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_SI
p.To.Type = obj.TYPE_REG
p.To.Reg = REG_AX
p = obj.Appendp(ctxt, p)
p.As = int16(cmp)
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_AX
p.To.Type = obj.TYPE_CONST
p.To.Offset = int64(framesize) + (obj.StackGuard - obj.StackSmall)
}
// common
p = obj.Appendp(ctxt, p)
p.As = AJHI
p.To.Type = obj.TYPE_BRANCH
q := p
p = obj.Appendp(ctxt, p)
p.As = obj.ACALL
p.To.Type = obj.TYPE_BRANCH
if ctxt.Cursym.Cfunc != 0 {
p.To.Sym = obj.Linklookup(ctxt, "runtime.morestackc", 0)
} else {
p.To.Sym = ctxt.Symmorestack[obj.Bool2int(noctxt)]
}
p = obj.Appendp(ctxt, p)
p.As = obj.AJMP
p.To.Type = obj.TYPE_BRANCH
p.Pcond = ctxt.Cursym.Text.Link
if q != nil {
q.Pcond = p.Link
}
if q1 != nil {
q1.Pcond = q.Link
}
*jmpok = q
return p
}
func follow(ctxt *obj.Link, s *obj.LSym) {
ctxt.Cursym = s
firstp := ctxt.NewProg()
lastp := firstp
xfol(ctxt, s.Text, &lastp)
lastp.Link = nil
s.Text = firstp.Link
}
func nofollow(a int) bool {
switch a {
case obj.AJMP,
obj.ARET,
AIRETL,
AIRETQ,
AIRETW,
ARETFL,
ARETFQ,
ARETFW,
obj.AUNDEF:
return true
}
return false
}
func pushpop(a int) bool {
switch a {
case APUSHL,
APUSHFL,
APUSHQ,
APUSHFQ,
APUSHW,
APUSHFW,
APOPL,
APOPFL,
APOPQ,
APOPFQ,
APOPW,
APOPFW:
return true
}
return false
}
func relinv(a int16) int16 {
switch a {
case AJEQ:
return AJNE
case AJNE:
return AJEQ
case AJLE:
return AJGT
case AJLS:
return AJHI
case AJLT:
return AJGE
case AJMI:
return AJPL
case AJGE:
return AJLT
case AJPL:
return AJMI
case AJGT:
return AJLE
case AJHI:
return AJLS
case AJCS:
return AJCC
case AJCC:
return AJCS
case AJPS:
return AJPC
case AJPC:
return AJPS
case AJOS:
return AJOC
case AJOC:
return AJOS
}
log.Fatalf("unknown relation: %s", obj.Aconv(int(a)))
return 0
}
func xfol(ctxt *obj.Link, p *obj.Prog, last **obj.Prog) {
var q *obj.Prog
var i int
var a int
loop:
if p == nil {
return
}
if p.As == obj.AJMP {
q = p.Pcond
if q != nil && q.As != obj.ATEXT {
/* mark instruction as done and continue layout at target of jump */
p.Mark = 1
p = q
if p.Mark == 0 {
goto loop
}
}
}
if p.Mark != 0 {
/*
* p goes here, but already used it elsewhere.
* copy up to 4 instructions or else branch to other copy.
*/
i = 0
q = p
for ; i < 4; i, q = i+1, q.Link {
if q == nil {
break
}
if q == *last {
break
}
a = int(q.As)
if a == obj.ANOP {
i--
continue
}
if nofollow(a) || pushpop(a) {
break // NOTE(rsc): arm does goto copy
}
if q.Pcond == nil || q.Pcond.Mark != 0 {
continue
}
if a == obj.ACALL || a == ALOOP {
continue
}
for {
if p.As == obj.ANOP {
p = p.Link
continue
}
q = obj.Copyp(ctxt, p)
p = p.Link
q.Mark = 1
(*last).Link = q
*last = q
if int(q.As) != a || q.Pcond == nil || q.Pcond.Mark != 0 {
continue
}
q.As = relinv(q.As)
p = q.Pcond
q.Pcond = q.Link
q.Link = p
xfol(ctxt, q.Link, last)
p = q.Link
if p.Mark != 0 {
return
}
goto loop
/* */
}
}
q = ctxt.NewProg()
q.As = obj.AJMP
q.Lineno = p.Lineno
q.To.Type = obj.TYPE_BRANCH
q.To.Offset = p.Pc
q.Pcond = p
p = q
}
/* emit p */
p.Mark = 1
(*last).Link = p
*last = p
a = int(p.As)
/* continue loop with what comes after p */
if nofollow(a) {
return
}
if p.Pcond != nil && a != obj.ACALL {
/*
* some kind of conditional branch.
* recurse to follow one path.
* continue loop on the other.
*/
q = obj.Brchain(ctxt, p.Pcond)
if q != nil {
p.Pcond = q
}
q = obj.Brchain(ctxt, p.Link)
if q != nil {
p.Link = q
}
if p.From.Type == obj.TYPE_CONST {
if p.From.Offset == 1 {
/*
* expect conditional jump to be taken.
* rewrite so that's the fall-through case.
*/
p.As = relinv(int16(a))
q = p.Link
p.Link = p.Pcond
p.Pcond = q
}
} else {
q = p.Link
if q.Mark != 0 {
if a != ALOOP {
p.As = relinv(int16(a))
p.Link = p.Pcond
p.Pcond = q
}
}
}
xfol(ctxt, p.Link, last)
if p.Pcond.Mark != 0 {
return
}
p = p.Pcond
goto loop
}
p = p.Link
goto loop
}
var unaryDst = map[int]bool{
ABSWAPL: true,
ABSWAPQ: true,
ACMPXCHG8B: true,
ADECB: true,
ADECL: true,
ADECQ: true,
ADECW: true,
AINCB: true,
AINCL: true,
AINCQ: true,
AINCW: true,
ANEGB: true,
ANEGL: true,
ANEGQ: true,
ANEGW: true,
ANOTB: true,
ANOTL: true,
ANOTQ: true,
ANOTW: true,
APOPL: true,
APOPQ: true,
APOPW: true,
ASETCC: true,
ASETCS: true,
ASETEQ: true,
ASETGE: true,
ASETGT: true,
ASETHI: true,
ASETLE: true,
ASETLS: true,
ASETLT: true,
ASETMI: true,
ASETNE: true,
ASETOC: true,
ASETOS: true,
ASETPC: true,
ASETPL: true,
ASETPS: true,
AFFREE: true,
AFLDENV: true,
AFSAVE: true,
AFSTCW: true,
AFSTENV: true,
AFSTSW: true,
AFXSAVE: true,
AFXSAVE64: true,
ASTMXCSR: true,
}
var Linkamd64 = obj.LinkArch{
ByteOrder: binary.LittleEndian,
Name: "amd64",
Thechar: '6',
Preprocess: preprocess,
Assemble: span6,
Follow: follow,
Progedit: progedit,
UnaryDst: unaryDst,
Minlc: 1,
Ptrsize: 8,
Regsize: 8,
}
var Linkamd64p32 = obj.LinkArch{
ByteOrder: binary.LittleEndian,
Name: "amd64p32",
Thechar: '6',
Preprocess: preprocess,
Assemble: span6,
Follow: follow,
Progedit: progedit,
UnaryDst: unaryDst,
Minlc: 1,
Ptrsize: 4,
Regsize: 8,
}
var Link386 = obj.LinkArch{
ByteOrder: binary.LittleEndian,
Name: "386",
Thechar: '8',
Preprocess: preprocess,
Assemble: span6,
Follow: follow,
Progedit: progedit,
UnaryDst: unaryDst,
Minlc: 1,
Ptrsize: 4,
Regsize: 4,
}
func fixjmp(firstp *obj.Prog) {
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("\nfixjmp\n")
}
// pass 1: resolve jump to jump, mark all code as dead.
jmploop := 0
for p := firstp; p != nil; p = p.Link {
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("%v\n", p)
}
if p.As != obj.ACALL && p.To.Type == obj.TYPE_BRANCH && p.To.Val.(*obj.Prog) != nil && p.To.Val.(*obj.Prog).As == obj.AJMP {
p.To.Val = chasejmp(p.To.Val.(*obj.Prog), &jmploop)
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("->%v\n", p)
}
}
p.Opt = dead
}
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("\n")
}
// pass 2: mark all reachable code alive
mark(firstp)
// pass 3: delete dead code (mostly JMPs).
var last *obj.Prog
for p := firstp; p != nil; p = p.Link {
if p.Opt == dead {
if p.Link == nil && p.As == obj.ARET && last != nil && last.As != obj.ARET {
// This is the final ARET, and the code so far doesn't have one.
// Let it stay. The register allocator assumes that all live code in
// the function can be traversed by starting at all the RET instructions
// and following predecessor links. If we remove the final RET,
// this assumption will not hold in the case of an infinite loop
// at the end of a function.
// Keep the RET but mark it dead for the liveness analysis.
p.Mode = 1
} else {
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("del %v\n", p)
}
continue
}
}
if last != nil {
last.Link = p
}
last = p
}
last.Link = nil
// pass 4: elide JMP to next instruction.
// only safe if there are no jumps to JMPs anymore.
if jmploop == 0 {
var last *obj.Prog
for p := firstp; p != nil; p = p.Link {
if p.As == obj.AJMP && p.To.Type == obj.TYPE_BRANCH && p.To.Val == p.Link {
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("del %v\n", p)
}
continue
}
if last != nil {
last.Link = p
}
last = p
}
last.Link = nil
}
if Debug['R'] != 0 && Debug['v'] != 0 {
fmt.Printf("\n")
for p := firstp; p != nil; p = p.Link {
fmt.Printf("%v\n", p)
}
fmt.Printf("\n")
}
}
func Clearp(p *obj.Prog) {
obj.Nopout(p)
p.As = obj.AEND
p.Pc = int64(pcloc)
pcloc++
}
func peep(firstp *obj.Prog) {
g := (*gc.Graph)(gc.Flowstart(firstp, nil))
if g == nil {
return
}
gactive = 0
// byte, word arithmetic elimination.
elimshortmov(g)
// constant propagation
// find MOV $con,R followed by
// another MOV $con,R without
// setting R in the interim
var p *obj.Prog
for r := (*gc.Flow)(g.Start); r != nil; r = r.Link {
p = r.Prog
switch p.As {
case x86.ALEAL,
x86.ALEAQ:
if regtyp(&p.To) {
if p.From.Sym != nil {
if p.From.Index == x86.REG_NONE {
conprop(r)
}
}
}
case x86.AMOVB,
x86.AMOVW,
x86.AMOVL,
x86.AMOVQ,
x86.AMOVSS,
x86.AMOVSD:
if regtyp(&p.To) {
if p.From.Type == obj.TYPE_CONST || p.From.Type == obj.TYPE_FCONST {
conprop(r)
}
}
}
}
var r *gc.Flow
var r1 *gc.Flow
var p1 *obj.Prog
var t int
loop1:
if gc.Debug['P'] != 0 && gc.Debug['v'] != 0 {
gc.Dumpit("loop1", g.Start, 0)
}
t = 0
for r = g.Start; r != nil; r = r.Link {
p = r.Prog
switch p.As {
case x86.AMOVL,
x86.AMOVQ,
x86.AMOVSS,
x86.AMOVSD:
if regtyp(&p.To) {
if regtyp(&p.From) {
if copyprop(g, r) {
excise(r)
t++
} else if subprop(r) && copyprop(g, r) {
excise(r)
t++
}
}
}
case x86.AMOVBLZX,
x86.AMOVWLZX,
x86.AMOVBLSX,
x86.AMOVWLSX:
if regtyp(&p.To) {
r1 = rnops(gc.Uniqs(r))
if r1 != nil {
p1 = r1.Prog
if p.As == p1.As && p.To.Type == p1.From.Type && p.To.Reg == p1.From.Reg {
p1.As = x86.AMOVL
t++
}
}
}
case x86.AMOVBQSX,
x86.AMOVBQZX,
x86.AMOVWQSX,
x86.AMOVWQZX,
x86.AMOVLQSX,
x86.AMOVLQZX,
x86.AMOVQL:
if regtyp(&p.To) {
r1 = rnops(gc.Uniqs(r))
if r1 != nil {
p1 = r1.Prog
if p.As == p1.As && p.To.Type == p1.From.Type && p.To.Reg == p1.From.Reg {
p1.As = x86.AMOVQ
t++
}
}
}
case x86.AADDL,
x86.AADDQ,
x86.AADDW:
if p.From.Type != obj.TYPE_CONST || needc(p.Link) {
break
}
if p.From.Offset == -1 {
if p.As == x86.AADDQ {
p.As = x86.ADECQ
} else if p.As == x86.AADDL {
p.As = x86.ADECL
} else {
p.As = x86.ADECW
}
p.From = obj.Addr{}
break
}
if p.From.Offset == 1 {
if p.As == x86.AADDQ {
p.As = x86.AINCQ
} else if p.As == x86.AADDL {
p.As = x86.AINCL
} else {
p.As = x86.AINCW
}
p.From = obj.Addr{}
break
}
case x86.ASUBL,
x86.ASUBQ,
x86.ASUBW:
if p.From.Type != obj.TYPE_CONST || needc(p.Link) {
break
}
if p.From.Offset == -1 {
if p.As == x86.ASUBQ {
p.As = x86.AINCQ
} else if p.As == x86.ASUBL {
p.As = x86.AINCL
} else {
p.As = x86.AINCW
}
p.From = obj.Addr{}
break
}
if p.From.Offset == 1 {
if p.As == x86.ASUBQ {
p.As = x86.ADECQ
} else if p.As == x86.ASUBL {
p.As = x86.ADECL
} else {
p.As = x86.ADECW
}
p.From = obj.Addr{}
break
}
}
}
if t != 0 {
goto loop1
}
// MOVLQZX removal.
// The MOVLQZX exists to avoid being confused for a
// MOVL that is just copying 32-bit data around during
// copyprop. Now that copyprop is done, remov MOVLQZX R1, R2
// if it is dominated by an earlier ADDL/MOVL/etc into R1 that
// will have already cleared the high bits.
//
// MOVSD removal.
// We never use packed registers, so a MOVSD between registers
// can be replaced by MOVAPD, which moves the pair of float64s
// instead of just the lower one. We only use the lower one, but
// the processor can do better if we do moves using both.
for r := (*gc.Flow)(g.Start); r != nil; r = r.Link {
p = r.Prog
if p.As == x86.AMOVLQZX {
if regtyp(&p.From) {
if p.From.Type == p.To.Type && p.From.Reg == p.To.Reg {
if prevl(r, int(p.From.Reg)) {
excise(r)
}
}
}
}
if p.As == x86.AMOVSD {
if regtyp(&p.From) {
if regtyp(&p.To) {
p.As = x86.AMOVAPD
}
}
}
}
// load pipelining
// push any load from memory as early as possible
// to give it time to complete before use.
for r := (*gc.Flow)(g.Start); r != nil; r = r.Link {
p = r.Prog
switch p.As {
case x86.AMOVB,
x86.AMOVW,
x86.AMOVL,
x86.AMOVQ,
x86.AMOVLQZX:
if regtyp(&p.To) && !regconsttyp(&p.From) {
pushback(r)
}
}
}
gc.Flowend(g)
}
// movb elimination.
// movb is simulated by the linker
// when a register other than ax, bx, cx, dx
// is used, so rewrite to other instructions
// when possible. a movb into a register
// can smash the entire 32-bit register without
// causing any trouble.
//
// TODO: Using the Q forms here instead of the L forms
// seems unnecessary, and it makes the instructions longer.
func elimshortmov(g *gc.Graph) {
var p *obj.Prog
for r := (*gc.Flow)(g.Start); r != nil; r = r.Link {
p = r.Prog
if regtyp(&p.To) {
switch p.As {
case x86.AINCB,
x86.AINCW:
p.As = x86.AINCQ
case x86.ADECB,
x86.ADECW:
p.As = x86.ADECQ
case x86.ANEGB,
x86.ANEGW:
p.As = x86.ANEGQ
case x86.ANOTB,
x86.ANOTW:
p.As = x86.ANOTQ
}
if regtyp(&p.From) || p.From.Type == obj.TYPE_CONST {
// move or artihmetic into partial register.
// from another register or constant can be movl.
// we don't switch to 64-bit arithmetic if it can
// change how the carry bit is set (and the carry bit is needed).
switch p.As {
case x86.AMOVB,
x86.AMOVW:
p.As = x86.AMOVQ
case x86.AADDB,
x86.AADDW:
if !needc(p.Link) {
p.As = x86.AADDQ
}
case x86.ASUBB,
x86.ASUBW:
if !needc(p.Link) {
p.As = x86.ASUBQ
}
case x86.AMULB,
x86.AMULW:
p.As = x86.AMULQ
case x86.AIMULB,
x86.AIMULW:
p.As = x86.AIMULQ
case x86.AANDB,
x86.AANDW:
p.As = x86.AANDQ
case x86.AORB,
x86.AORW:
p.As = x86.AORQ
case x86.AXORB,
x86.AXORW:
p.As = x86.AXORQ
case x86.ASHLB,
x86.ASHLW:
p.As = x86.ASHLQ
}
} else if p.From.Type != obj.TYPE_REG {
// explicit zero extension, but don't
// do that if source is a byte register
// (only AH can occur and it's forbidden).
switch p.As {
case x86.AMOVB:
p.As = x86.AMOVBQZX
case x86.AMOVW:
p.As = x86.AMOVWQZX
}
}
}
}
}
