func elfsetupplt() {
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
if plt.Size == 0 {
// pushl got+4
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x35)
ld.Addaddrplus(ld.Ctxt, plt, got, 4)
// jmp *got+8
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x25)
ld.Addaddrplus(ld.Ctxt, plt, got, 8)
// zero pad
ld.Adduint32(ld.Ctxt, plt, 0)
// assume got->size == 0 too
ld.Addaddrplus(ld.Ctxt, got, ld.Linklookup(ld.Ctxt, ".dynamic", 0), 0)
ld.Adduint32(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, got, 0)
}
}
func elfsetupplt() {
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
if plt.Size == 0 {
// str lr, [sp, #-4]!
ld.Adduint32(ld.Ctxt, plt, 0xe52de004)
// ldr lr, [pc, #4]
ld.Adduint32(ld.Ctxt, plt, 0xe59fe004)
// add lr, pc, lr
ld.Adduint32(ld.Ctxt, plt, 0xe08fe00e)
// ldr pc, [lr, #8]!
ld.Adduint32(ld.Ctxt, plt, 0xe5bef008)
// .word &GLOBAL_OFFSET_TABLE[0] - .
ld.Addpcrelplus(ld.Ctxt, plt, got, 4)
// the first .plt entry requires 3 .plt.got entries
ld.Adduint32(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, got, 0)
}
}
func elfsetupplt() {
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
if plt.Size == 0 {
// pushq got+8(IP)
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x35)
ld.Addpcrelplus(ld.Ctxt, plt, got, 8)
// jmpq got+16(IP)
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x25)
ld.Addpcrelplus(ld.Ctxt, plt, got, 16)
// nopl 0(AX)
ld.Adduint32(ld.Ctxt, plt, 0x00401f0f)
// assume got->size == 0 too
ld.Addaddrplus(ld.Ctxt, got, ld.Linklookup(ld.Ctxt, ".dynamic", 0), 0)
ld.Adduint64(ld.Ctxt, got, 0)
ld.Adduint64(ld.Ctxt, got, 0)
}
}
// Generate the glink resolver stub if necessary and return the .glink section
func ensureglinkresolver() *ld.LSym {
glink := ld.Linklookup(ld.Ctxt, ".glink", 0)
if glink.Size != 0 {
return glink
}
// This is essentially the resolver from the ppc64 ELF ABI.
// At entry, r12 holds the address of the symbol resolver stub
// for the target routine and the argument registers hold the
// arguments for the target routine.
//
// This stub is PIC, so first get the PC of label 1 into r11.
// Other things will be relative to this.
ld.Adduint32(ld.Ctxt, glink, 0x7c0802a6) // mflr r0
ld.Adduint32(ld.Ctxt, glink, 0x429f0005) // bcl 20,31,1f
ld.Adduint32(ld.Ctxt, glink, 0x7d6802a6) // 1: mflr r11
ld.Adduint32(ld.Ctxt, glink, 0x7c0803a6) // mtlf r0
// Compute the .plt array index from the entry point address.
// Because this is PIC, everything is relative to label 1b (in
// r11):
// r0 = ((r12 - r11) - (res_0 - r11)) / 4 = (r12 - res_0) / 4
ld.Adduint32(ld.Ctxt, glink, 0x3800ffd0) // li r0,-(res_0-1b)=-48
ld.Adduint32(ld.Ctxt, glink, 0x7c006214) // add r0,r0,r12
ld.Adduint32(ld.Ctxt, glink, 0x7c0b0050) // sub r0,r0,r11
ld.Adduint32(ld.Ctxt, glink, 0x7800f082) // srdi r0,r0,2
// r11 = address of the first byte of the PLT
r := ld.Addrel(glink)
r.Off = int32(glink.Size)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Siz = 8
r.Type = obj.R_ADDRPOWER
ld.Adduint32(ld.Ctxt, glink, 0x3d600000) // addis r11,0,.plt@ha
ld.Adduint32(ld.Ctxt, glink, 0x396b0000) // addi r11,r11,.plt@l
// Load r12 = dynamic resolver address and r11 = DSO
// identifier from the first two doublewords of the PLT.
ld.Adduint32(ld.Ctxt, glink, 0xe98b0000) // ld r12,0(r11)
ld.Adduint32(ld.Ctxt, glink, 0xe96b0008) // ld r11,8(r11)
// Jump to the dynamic resolver
ld.Adduint32(ld.Ctxt, glink, 0x7d8903a6) // mtctr r12
ld.Adduint32(ld.Ctxt, glink, 0x4e800420) // bctr
// The symbol resolvers must immediately follow.
// res_0:
// Add DT_PPC64_GLINK .dynamic entry, which points to 32 bytes
// before the first symbol resolver stub.
s := ld.Linklookup(ld.Ctxt, ".dynamic", 0)
ld.Elfwritedynentsymplus(s, ld.DT_PPC64_GLINK, glink, glink.Size-32)
return glink
}
func gentext() {
if !ld.DynlinkingGo() {
return
}
addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
if addmoduledata.Type == obj.STEXT {
// we're linking a module containing the runtime -> no need for
// an init function
return
}
addmoduledata.Reachable = true
initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
initfunc.Type = obj.STEXT
initfunc.Local = true
initfunc.Reachable = true
o := func(op uint32) {
ld.Adduint32(ld.Ctxt, initfunc, op)
}
// 0000000000000000 <local.dso_init>:
// 0: 90000000 adrp x0, 0 <runtime.firstmoduledata>
// 0: R_AARCH64_ADR_PREL_PG_HI21 local.moduledata
// 4: 91000000 add x0, x0, #0x0
// 4: R_AARCH64_ADD_ABS_LO12_NC local.moduledata
o(0x90000000)
o(0x91000000)
rel := ld.Addrel(initfunc)
rel.Off = 0
rel.Siz = 8
rel.Sym = ld.Ctxt.Moduledata
rel.Type = obj.R_ADDRARM64
// 8: 14000000 bl 0 <runtime.addmoduledata>
// 8: R_AARCH64_CALL26 runtime.addmoduledata
o(0x14000000)
rel = ld.Addrel(initfunc)
rel.Off = 8
rel.Siz = 4
rel.Sym = ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
rel.Type = obj.R_CALLARM64 // Really should be R_AARCH64_JUMP26 but doesn't seem to make any difference
if ld.Ctxt.Etextp != nil {
ld.Ctxt.Etextp.Next = initfunc
} else {
ld.Ctxt.Textp = initfunc
}
ld.Ctxt.Etextp = initfunc
initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
initarray_entry.Reachable = true
initarray_entry.Local = true
initarray_entry.Type = obj.SINITARR
ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}
func gentext() {
if !ld.DynlinkingGo() {
return
}
addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
if addmoduledata.Type == obj.STEXT {
// we're linking a module containing the runtime -> no need for
// an init function
return
}
addmoduledata.Reachable = true
initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
initfunc.Type = obj.STEXT
initfunc.Local = true
initfunc.Reachable = true
o := func(op uint32) {
ld.Adduint32(ld.Ctxt, initfunc, op)
}
o(0xe59f0004)
o(0xe08f0000)
o(0xeafffffe)
rel := ld.Addrel(initfunc)
rel.Off = 8
rel.Siz = 4
rel.Sym = ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
rel.Type = obj.R_CALLARM
rel.Add = 0xeafffffe // vomit
o(0x00000000)
rel = ld.Addrel(initfunc)
rel.Off = 12
rel.Siz = 4
rel.Sym = ld.Ctxt.Moduledata
rel.Type = obj.R_PCREL
rel.Add = 4
if ld.Ctxt.Etextp != nil {
ld.Ctxt.Etextp.Next = initfunc
} else {
ld.Ctxt.Textp = initfunc
}
ld.Ctxt.Etextp = initfunc
initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
initarray_entry.Reachable = true
initarray_entry.Local = true
initarray_entry.Type = obj.SINITARR
ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}
func addgotsym(ctxt *ld.Link, s *ld.LSym) {
if s.Got >= 0 {
return
}
ld.Adddynsym(ctxt, s)
got := ld.Linklookup(ctxt, ".got", 0)
s.Got = int32(got.Size)
ld.Adduint32(ctxt, got, 0)
if ld.Iself {
rel := ld.Linklookup(ctxt, ".rel", 0)
ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_GLOB_DAT))
} else {
ld.Diag("addgotsym: unsupported binary format")
}
}
func addpltsym(ctxt *ld.Link, s *ld.LSym) {
if s.Plt >= 0 {
return
}
ld.Adddynsym(ctxt, s)
if ld.Iself {
plt := ld.Linklookup(ctxt, ".plt", 0)
rela := ld.Linklookup(ctxt, ".rela.plt", 0)
if plt.Size == 0 {
elfsetupplt()
}
// Create the glink resolver if necessary
glink := ensureglinkresolver()
// Write symbol resolver stub (just a branch to the
// glink resolver stub)
r := ld.Addrel(glink)
r.Sym = glink
r.Off = int32(glink.Size)
r.Siz = 4
r.Type = obj.R_CALLPOWER
ld.Adduint32(ctxt, glink, 0x48000000) // b .glink
// In the ppc64 ABI, the dynamic linker is responsible
// for writing the entire PLT. We just need to
// reserve 8 bytes for each PLT entry and generate a
// JMP_SLOT dynamic relocation for it.
//
// TODO(austin): ABI v1 is different
s.Plt = int32(plt.Size)
plt.Size += 8
ld.Addaddrplus(ctxt, rela, plt, int64(s.Plt))
ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_PPC64_JMP_SLOT))
ld.Adduint64(ctxt, rela, 0)
} else {
ld.Diag("addpltsym: unsupported binary format")
}
}
func gentext() {
if !ld.DynlinkingGo() {
return
}
addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
if addmoduledata.Type == obj.STEXT {
// we're linking a module containing the runtime -> no need for
// an init function
return
}
addmoduledata.Reachable = true
initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
initfunc.Type = obj.STEXT
initfunc.Local = true
initfunc.Reachable = true
o := func(op ...uint8) {
for _, op1 := range op {
ld.Adduint8(ld.Ctxt, initfunc, op1)
}
}
// 0000000000000000 <local.dso_init>:
// 0: 48 8d 3d 00 00 00 00 lea 0x0(%rip),%rdi # 7 <local.dso_init+0x7>
// 3: R_X86_64_PC32 runtime.firstmoduledata-0x4
o(0x48, 0x8d, 0x3d)
ld.Addpcrelplus(ld.Ctxt, initfunc, ld.Ctxt.Moduledata, 0)
// 7: e8 00 00 00 00 callq c <local.dso_init+0xc>
// 8: R_X86_64_PLT32 runtime.addmoduledata-0x4
o(0xe8)
Addcall(ld.Ctxt, initfunc, addmoduledata)
// c: c3 retq
o(0xc3)
if ld.Ctxt.Etextp != nil {
ld.Ctxt.Etextp.Next = initfunc
} else {
ld.Ctxt.Textp = initfunc
}
ld.Ctxt.Etextp = initfunc
initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
initarray_entry.Reachable = true
initarray_entry.Local = true
initarray_entry.Type = obj.SINITARR
ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}
func elfsetupplt() {
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
if plt.Size == 0 {
// The dynamic linker stores the address of the
// dynamic resolver and the DSO identifier in the two
// doublewords at the beginning of the .plt section
// before the PLT array. Reserve space for these.
plt.Size = 16
}
}
func addgotsym(s *ld.LSym) {
if s.Got >= 0 {
return
}
ld.Adddynsym(ld.Ctxt, s)
got := ld.Linklookup(ld.Ctxt, ".got", 0)
s.Got = int32(got.Size)
ld.Adduint64(ld.Ctxt, got, 0)
if ld.Iself {
rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
ld.Addaddrplus(ld.Ctxt, rela, got, int64(s.Got))
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_X86_64_GLOB_DAT))
ld.Adduint64(ld.Ctxt, rela, 0)
} else if ld.HEADTYPE == obj.Hdarwin {
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.got", 0), uint32(s.Dynid))
} else {
ld.Diag("addgotsym: unsupported binary format")
}
}
func addpltsym(ctxt *ld.Link, s *ld.LSym) {
if s.Plt >= 0 {
return
}
ld.Adddynsym(ctxt, s)
if ld.Iself {
plt := ld.Linklookup(ctxt, ".plt", 0)
got := ld.Linklookup(ctxt, ".got.plt", 0)
rel := ld.Linklookup(ctxt, ".rel.plt", 0)
if plt.Size == 0 {
elfsetupplt()
}
// jmpq *got+size
ld.Adduint8(ctxt, plt, 0xff)
ld.Adduint8(ctxt, plt, 0x25)
ld.Addaddrplus(ctxt, plt, got, got.Size)
// add to got: pointer to current pos in plt
ld.Addaddrplus(ctxt, got, plt, plt.Size)
// pushl $x
ld.Adduint8(ctxt, plt, 0x68)
ld.Adduint32(ctxt, plt, uint32(rel.Size))
// jmp .plt
ld.Adduint8(ctxt, plt, 0xe9)
ld.Adduint32(ctxt, plt, uint32(-(plt.Size + 4)))
// rel
ld.Addaddrplus(ctxt, rel, got, got.Size-4)
ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_JMP_SLOT))
s.Plt = int32(plt.Size - 16)
} else if ld.HEADTYPE == obj.Hdarwin {
// Same laziness as in 6l.
plt := ld.Linklookup(ctxt, ".plt", 0)
addgotsym(ctxt, s)
ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.plt", 0), uint32(s.Dynid))
// jmpq *got+size(IP)
s.Plt = int32(plt.Size)
ld.Adduint8(ctxt, plt, 0xff)
ld.Adduint8(ctxt, plt, 0x25)
ld.Addaddrplus(ctxt, plt, ld.Linklookup(ctxt, ".got", 0), int64(s.Got))
} else {
ld.Diag("addpltsym: unsupported binary format")
}
}
func addpltsym(ctxt *ld.Link, s *ld.LSym) {
if s.Plt >= 0 {
return
}
ld.Adddynsym(ctxt, s)
if ld.Iself {
plt := ld.Linklookup(ctxt, ".plt", 0)
got := ld.Linklookup(ctxt, ".got.plt", 0)
rel := ld.Linklookup(ctxt, ".rel.plt", 0)
if plt.Size == 0 {
elfsetupplt()
}
// .got entry
s.Got = int32(got.Size)
// In theory, all GOT should point to the first PLT entry,
// Linux/ARM's dynamic linker will do that for us, but FreeBSD/ARM's
// dynamic linker won't, so we'd better do it ourselves.
ld.Addaddrplus(ctxt, got, plt, 0)
// .plt entry, this depends on the .got entry
s.Plt = int32(plt.Size)
addpltreloc(ctxt, plt, got, s, obj.R_PLT0) // add lr, pc, #0xXX00000
addpltreloc(ctxt, plt, got, s, obj.R_PLT1) // add lr, lr, #0xYY000
addpltreloc(ctxt, plt, got, s, obj.R_PLT2) // ldr pc, [lr, #0xZZZ]!
// rel
ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_JUMP_SLOT))
} else {
ld.Diag("addpltsym: unsupported binary format")
}
}
func addgotsyminternal(ctxt *ld.Link, s *ld.LSym) {
if s.Got >= 0 {
return
}
got := ld.Linklookup(ctxt, ".got", 0)
s.Got = int32(got.Size)
ld.Addaddrplus(ctxt, got, s, 0)
if ld.Iself {
} else {
ld.Diag("addgotsyminternal: unsupported binary format")
}
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
return -1
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
}
return -1
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
return -1
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
case obj.R_ADDRMIPS:
t := ld.Symaddr(r.Sym) + r.Add
if t >= 1<<32 || t < -1<<32 {
ld.Diag("program too large, address relocation = %v", t)
}
// the first instruction is always at the lower address, this is endian neutral;
// but note that o1 and o2 should still use the target endian.
o1 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off:])
o2 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off+4:])
o1 = o1&0xffff0000 | uint32(t>>16)&0xffff
o2 = o2&0xffff0000 | uint32(t)&0xffff
// when laid out, the instruction order must always be o1, o2.
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o1)<<32 | int64(o2)
} else {
*val = int64(o2)<<32 | int64(o1)
}
return 0
case obj.R_CALLMIPS,
obj.R_JMPMIPS:
// Low 26 bits = (S + A) >> 2
t := ld.Symaddr(r.Sym) + r.Add
o1 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off:])
*val = int64(o1&0xfc000000 | uint32(t>>2)&^0xfc000000)
return 0
}
return -1
}
// Construct a call stub in stub that calls symbol targ via its PLT
// entry.
func gencallstub(abicase int, stub *ld.LSym, targ *ld.LSym) {
if abicase != 1 {
// If we see R_PPC64_TOCSAVE or R_PPC64_REL24_NOTOC
// relocations, we'll need to implement cases 2 and 3.
log.Fatalf("gencallstub only implements case 1 calls")
}
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
stub.Type = obj.STEXT
// Save TOC pointer in TOC save slot
ld.Adduint32(ld.Ctxt, stub, 0xf8410018) // std r2,24(r1)
// Load the function pointer from the PLT.
r := ld.Addrel(stub)
r.Off = int32(stub.Size)
r.Sym = plt
r.Add = int64(targ.Plt)
r.Siz = 2
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
r.Off += int32(r.Siz)
}
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_HA
ld.Adduint32(ld.Ctxt, stub, 0x3d820000) // addis r12,r2,targ@plt@toc@ha
r = ld.Addrel(stub)
r.Off = int32(stub.Size)
r.Sym = plt
r.Add = int64(targ.Plt)
r.Siz = 2
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
r.Off += int32(r.Siz)
}
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_LO
ld.Adduint32(ld.Ctxt, stub, 0xe98c0000) // ld r12,targ@plt@toc@l(r12)
// Jump to the loaded pointer
ld.Adduint32(ld.Ctxt, stub, 0x7d8903a6) // mtctr r12
ld.Adduint32(ld.Ctxt, stub, 0x4e800420) // bctr
}
func addpltsym(s *ld.LSym) {
if s.Plt >= 0 {
return
}
ld.Adddynsym(ld.Ctxt, s)
if ld.Iself {
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
rela := ld.Linklookup(ld.Ctxt, ".rela.plt", 0)
if plt.Size == 0 {
elfsetupplt()
}
// jmpq *got+size(IP)
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x25)
ld.Addpcrelplus(ld.Ctxt, plt, got, got.Size)
// add to got: pointer to current pos in plt
ld.Addaddrplus(ld.Ctxt, got, plt, plt.Size)
// pushq $x
ld.Adduint8(ld.Ctxt, plt, 0x68)
ld.Adduint32(ld.Ctxt, plt, uint32((got.Size-24-8)/8))
// jmpq .plt
ld.Adduint8(ld.Ctxt, plt, 0xe9)
ld.Adduint32(ld.Ctxt, plt, uint32(-(plt.Size + 4)))
// rela
ld.Addaddrplus(ld.Ctxt, rela, got, got.Size-8)
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_X86_64_JMP_SLOT))
ld.Adduint64(ld.Ctxt, rela, 0)
s.Plt = int32(plt.Size - 16)
} else if ld.HEADTYPE == obj.Hdarwin {
// To do lazy symbol lookup right, we're supposed
// to tell the dynamic loader which library each
// symbol comes from and format the link info
// section just so. I'm too lazy (ha!) to do that
// so for now we'll just use non-lazy pointers,
// which don't need to be told which library to use.
//
// http://networkpx.blogspot.com/2009/09/about-lcdyldinfoonly-command.html
// has details about what we're avoiding.
addgotsym(s)
plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.plt", 0), uint32(s.Dynid))
// jmpq *got+size(IP)
s.Plt = int32(plt.Size)
ld.Adduint8(ld.Ctxt, plt, 0xff)
ld.Adduint8(ld.Ctxt, plt, 0x25)
ld.Addpcrelplus(ld.Ctxt, plt, ld.Linklookup(ld.Ctxt, ".got", 0), int64(s.Got))
} else {
ld.Diag("addpltsym: unsupported binary format")
}
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
switch r.Type {
default:
return -1
case obj.R_POWER_TLS, obj.R_POWER_TLS_LE, obj.R_POWER_TLS_IE:
r.Done = 0
// check Outer is nil, Type is TLSBSS?
r.Xadd = r.Add
r.Xsym = r.Sym
return 0
case obj.R_ADDRPOWER,
obj.R_ADDRPOWER_DS,
obj.R_ADDRPOWER_TOCREL,
obj.R_ADDRPOWER_TOCREL_DS,
obj.R_ADDRPOWER_GOT,
obj.R_ADDRPOWER_PCREL:
r.Done = 0
// set up addend for eventual relocation via outer symbol.
rs := r.Sym
r.Xadd = r.Add
for rs.Outer != nil {
r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
rs = rs.Outer
}
if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
ld.Diag("missing section for %s", rs.Name)
}
r.Xsym = rs
return 0
case obj.R_CALLPOWER:
r.Done = 0
r.Xsym = r.Sym
r.Xadd = r.Add
return 0
}
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
case obj.R_ADDRPOWER, obj.R_ADDRPOWER_DS:
return archrelocaddr(r, s, val)
case obj.R_CALLPOWER:
// Bits 6 through 29 = (S + A - P) >> 2
t := ld.Symaddr(r.Sym) + r.Add - (s.Value + int64(r.Off))
if t&3 != 0 {
ld.Ctxt.Diag("relocation for %s+%d is not aligned: %d", r.Sym.Name, r.Off, t)
}
if int64(int32(t<<6)>>6) != t {
// TODO(austin) This can happen if text > 32M.
// Add a call trampoline to .text in that case.
ld.Ctxt.Diag("relocation for %s+%d is too big: %d", r.Sym.Name, r.Off, t)
}
*val |= int64(uint32(t) &^ 0xfc000003)
return 0
case obj.R_POWER_TOC: // S + A - .TOC.
*val = ld.Symaddr(r.Sym) + r.Add - symtoc(s)
return 0
case obj.R_POWER_TLS_LE:
// The thread pointer points 0x7000 bytes after the start of the the
// thread local storage area as documented in section "3.7.2 TLS
// Runtime Handling" of "Power Architecture 64-Bit ELF V2 ABI
// Specification".
v := r.Sym.Value - 0x7000
if int64(int16(v)) != v {
ld.Diag("TLS offset out of range %d", v)
}
*val = (*val &^ 0xffff) | (v & 0xffff)
return 0
}
return -1
}
func adddynrel(s *ld.LSym, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_X86_64_PC32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ld.Diag("unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_X86_64_PLT32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
if targ.Type != obj.SDYNIMPORT {
// have symbol
if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
// turn MOVQ of GOT entry into LEAQ of symbol itself
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
r.Add += 4
return
}
}
// fall back to using GOT and hope for the best (CMOV*)
// TODO: just needs relocation, no need to put in .dynsym
addgotsym(targ)
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += 4
r.Add += int64(targ.Got)
return
case 256 + ld.R_X86_64_64:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
// Handle relocations found in Mach-O object files.
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
// TODO: What is the difference between all these?
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
if targ.Type == obj.SDYNIMPORT {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
r.Type = obj.R_PCREL
return
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
r.Type = obj.R_PCREL
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
if targ.Type != obj.SDYNIMPORT {
// have symbol
// turn MOVQ of GOT entry into LEAQ of symbol itself
if r.Off < 2 || s.P[r.Off-2] != 0x8b {
ld.Diag("unexpected GOT_LOAD reloc for non-dynamic symbol %s", targ.Name)
return
}
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
return
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_GOT*2 + 1:
if targ.Type != obj.SDYNIMPORT {
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
}
addgotsym(targ)
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALL,
obj.R_PCREL:
if ld.HEADTYPE == obj.Hwindows {
// nothing to do, the relocation will be laid out in pereloc1
return
} else {
// for both ELF and Mach-O
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
}
case obj.R_ADDR:
if s.Type == obj.STEXT && ld.Iself {
if ld.HEADTYPE == obj.Hsolaris {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
return
}
// The code is asking for the address of an external
// function. We provide it with the address of the
// correspondent GOT symbol.
addgotsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
return
}
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ld.Ctxt, targ)
rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
ld.Addaddrplus(ld.Ctxt, rela, s, int64(r.Off))
if r.Siz == 8 {
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_64))
} else {
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_32))
}
ld.Adduint64(ld.Ctxt, rela, uint64(r.Add))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hdarwin && s.Size == int64(ld.Thearch.Ptrsize) && r.Off == 0 {
// Mach-O relocations are a royal pain to lay out.
// They use a compact stateful bytecode representation
// that is too much bother to deal with.
// Instead, interpret the C declaration
// void *_Cvar_stderr = &stderr;
// as making _Cvar_stderr the name of a GOT entry
// for stderr. This is separate from the usual GOT entry,
// just in case the C code assigns to the variable,
// and of course it only works for single pointers,
// but we only need to support cgo and that's all it needs.
ld.Adddynsym(ld.Ctxt, targ)
got := ld.Linklookup(ld.Ctxt, ".got", 0)
s.Type = got.Type | obj.SSUB
s.Outer = got
s.Sub = got.Sub
got.Sub = s
s.Value = got.Size
ld.Adduint64(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hwindows {
// nothing to do, the relocation will be laid out in pereloc1
return
}
}
ld.Ctxt.Cursym = s
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func asmb() {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f asmb\n", obj.Cputime())
}
ld.Bso.Flush()
if ld.Iself {
ld.Asmbelfsetup()
}
sect := ld.Segtext.Sect
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Codeblk(int64(sect.Vaddr), int64(sect.Length))
for sect = sect.Next; sect != nil; sect = sect.Next {
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Datblk(int64(sect.Vaddr), int64(sect.Length))
}
if ld.Segrodata.Filelen > 0 {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f rodatblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segrodata.Fileoff))
ld.Datblk(int64(ld.Segrodata.Vaddr), int64(ld.Segrodata.Filelen))
}
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f datblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segdata.Fileoff))
ld.Datblk(int64(ld.Segdata.Vaddr), int64(ld.Segdata.Filelen))
machlink := uint32(0)
if ld.HEADTYPE == obj.Hdarwin {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
dwarfoff := uint32(ld.Rnd(int64(uint64(ld.HEADR)+ld.Segtext.Length), int64(ld.INITRND)) + ld.Rnd(int64(ld.Segdata.Filelen), int64(ld.INITRND)))
ld.Cseek(int64(dwarfoff))
ld.Segdwarf.Fileoff = uint64(ld.Cpos())
ld.Dwarfemitdebugsections()
ld.Segdwarf.Filelen = uint64(ld.Cpos()) - ld.Segdwarf.Fileoff
machlink = uint32(ld.Domacholink())
}
ld.Symsize = 0
ld.Spsize = 0
ld.Lcsize = 0
symo := uint32(0)
if ld.Debug['s'] == 0 {
// TODO: rationalize
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f sym\n", obj.Cputime())
}
ld.Bso.Flush()
switch ld.HEADTYPE {
default:
if ld.Iself {
symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
symo = uint32(ld.Rnd(int64(symo), int64(ld.INITRND)))
}
case obj.Hplan9:
symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
case obj.Hdarwin:
symo = uint32(ld.Segdwarf.Fileoff + uint64(ld.Rnd(int64(ld.Segdwarf.Filelen), int64(ld.INITRND))) + uint64(machlink))
case obj.Hwindows:
symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
symo = uint32(ld.Rnd(int64(symo), ld.PEFILEALIGN))
}
ld.Cseek(int64(symo))
switch ld.HEADTYPE {
default:
if ld.Iself {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f elfsym\n", obj.Cputime())
}
ld.Asmelfsym()
ld.Cflush()
ld.Cwrite(ld.Elfstrdat)
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
ld.Dwarfemitdebugsections()
if ld.Linkmode == ld.LinkExternal {
ld.Elfemitreloc()
}
}
case obj.Hplan9:
ld.Asmplan9sym()
ld.Cflush()
sym := ld.Linklookup(ld.Ctxt, "pclntab", 0)
if sym != nil {
ld.Lcsize = int32(len(sym.P))
for i := 0; int32(i) < ld.Lcsize; i++ {
ld.Cput(uint8(sym.P[i]))
}
ld.Cflush()
}
case obj.Hwindows:
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
ld.Dwarfemitdebugsections()
case obj.Hdarwin:
if ld.Linkmode == ld.LinkExternal {
ld.Machoemitreloc()
}
}
}
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f headr\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(0)
switch ld.HEADTYPE {
default:
case obj.Hplan9: /* plan9 */
magic := int32(4*11*11 + 7)
ld.Lputb(uint32(magic)) /* magic */
ld.Lputb(uint32(ld.Segtext.Filelen)) /* sizes */
ld.Lputb(uint32(ld.Segdata.Filelen))
ld.Lputb(uint32(ld.Segdata.Length - ld.Segdata.Filelen))
ld.Lputb(uint32(ld.Symsize)) /* nsyms */
ld.Lputb(uint32(ld.Entryvalue())) /* va of entry */
ld.Lputb(uint32(ld.Spsize)) /* sp offsets */
ld.Lputb(uint32(ld.Lcsize)) /* line offsets */
case obj.Hdarwin:
ld.Asmbmacho()
case obj.Hlinux,
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hnacl:
ld.Asmbelf(int64(symo))
case obj.Hwindows:
ld.Asmbpe()
}
ld.Cflush()
}
func gentext() {
if !ld.DynlinkingGo() && ld.Buildmode != ld.BuildmodePIE && ld.Buildmode != ld.BuildmodeCShared {
return
}
thunkfunc := ld.Linklookup(ld.Ctxt, "__x86.get_pc_thunk.cx", 0)
thunkfunc.Type = obj.STEXT
thunkfunc.Local = true
thunkfunc.Reachable = true
o := func(op ...uint8) {
for _, op1 := range op {
ld.Adduint8(ld.Ctxt, thunkfunc, op1)
}
}
// 8b 0c 24 mov (%esp),%ecx
o(0x8b, 0x0c, 0x24)
// c3 ret
o(0xc3)
if ld.Ctxt.Etextp != nil {
ld.Ctxt.Etextp.Next = thunkfunc
} else {
ld.Ctxt.Textp = thunkfunc
}
ld.Ctxt.Etextp = thunkfunc
addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
if addmoduledata.Type == obj.STEXT {
// we're linking a module containing the runtime -> no need for
// an init function
return
}
addmoduledata.Reachable = true
initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
initfunc.Type = obj.STEXT
initfunc.Local = true
initfunc.Reachable = true
o = func(op ...uint8) {
for _, op1 := range op {
ld.Adduint8(ld.Ctxt, initfunc, op1)
}
}
// go.link.addmoduledata:
// 53 push %ebx
// e8 00 00 00 00 call __x86.get_pc_thunk.cx + R_CALL __x86.get_pc_thunk.cx
// 8d 81 00 00 00 00 lea 0x0(%ecx), %eax + R_PCREL ld.Ctxt.Moduledata
// 8d 99 00 00 00 00 lea 0x0(%ecx), %ebx + R_GOTPC _GLOBAL_OFFSET_TABLE_
// e8 00 00 00 00 call runtime.addmoduledata@plt + R_CALL runtime.addmoduledata
// 5b pop %ebx
// c3 ret
o(0x53)
o(0xe8)
addcall(ld.Ctxt, initfunc, ld.Linklookup(ld.Ctxt, "__x86.get_pc_thunk.cx", 0))
o(0x8d, 0x81)
ld.Addpcrelplus(ld.Ctxt, initfunc, ld.Ctxt.Moduledata, 6)
o(0x8d, 0x99)
i := initfunc.Size
initfunc.Size += 4
ld.Symgrow(ld.Ctxt, initfunc, initfunc.Size)
r := ld.Addrel(initfunc)
r.Sym = ld.Linklookup(ld.Ctxt, "_GLOBAL_OFFSET_TABLE_", 0)
r.Off = int32(i)
r.Type = obj.R_PCREL
r.Add = 12
r.Siz = 4
o(0xe8)
addcall(ld.Ctxt, initfunc, addmoduledata)
o(0x5b)
o(0xc3)
ld.Ctxt.Etextp.Next = initfunc
ld.Ctxt.Etextp = initfunc
initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
initarray_entry.Reachable = true
initarray_entry.Local = true
initarray_entry.Type = obj.SINITARR
ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
switch r.Type {
default:
return -1
case obj.R_ARM64_GOTPCREL:
var o1, o2 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o1 = uint32(*val >> 32)
o2 = uint32(*val)
} else {
o1 = uint32(*val)
o2 = uint32(*val >> 32)
}
// Any relocation against a function symbol is redirected to
// be against a local symbol instead (see putelfsym in
// symtab.go) but unfortunately the system linker was buggy
// when confronted with a R_AARCH64_ADR_GOT_PAGE relocation
// against a local symbol until May 2015
// (https://sourceware.org/bugzilla/show_bug.cgi?id=18270). So
// we convert the adrp; ld64 + R_ARM64_GOTPCREL into adrp;
// add + R_ADDRARM64.
if !(r.Sym.Version != 0 || (r.Sym.Type&obj.SHIDDEN != 0) || r.Sym.Local) && r.Sym.Type == obj.STEXT && ld.DynlinkingGo() {
if o2&0xffc00000 != 0xf9400000 {
ld.Ctxt.Diag("R_ARM64_GOTPCREL against unexpected instruction %x", o2)
}
o2 = 0x91000000 | (o2 & 0x000003ff)
r.Type = obj.R_ADDRARM64
}
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o1)<<32 | int64(o2)
} else {
*val = int64(o2)<<32 | int64(o1)
}
fallthrough
case obj.R_ADDRARM64:
r.Done = 0
// set up addend for eventual relocation via outer symbol.
rs := r.Sym
r.Xadd = r.Add
for rs.Outer != nil {
r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
rs = rs.Outer
}
if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
ld.Diag("missing section for %s", rs.Name)
}
r.Xsym = rs
// Note: ld64 currently has a bug that any non-zero addend for BR26 relocation
// will make the linking fail because it thinks the code is not PIC even though
// the BR26 relocation should be fully resolved at link time.
// That is the reason why the next if block is disabled. When the bug in ld64
// is fixed, we can enable this block and also enable duff's device in cmd/7g.
if false && ld.HEADTYPE == obj.Hdarwin {
var o0, o1 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o0 = uint32(*val >> 32)
o1 = uint32(*val)
} else {
o0 = uint32(*val)
o1 = uint32(*val >> 32)
}
// Mach-O wants the addend to be encoded in the instruction
// Note that although Mach-O supports ARM64_RELOC_ADDEND, it
// can only encode 24-bit of signed addend, but the instructions
// supports 33-bit of signed addend, so we always encode the
// addend in place.
o0 |= (uint32((r.Xadd>>12)&3) << 29) | (uint32((r.Xadd>>12>>2)&0x7ffff) << 5)
o1 |= uint32(r.Xadd&0xfff) << 10
r.Xadd = 0
// when laid out, the instruction order must always be o1, o2.
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o0)<<32 | int64(o1)
} else {
*val = int64(o1)<<32 | int64(o0)
}
}
return 0
case obj.R_CALLARM64,
obj.R_ARM64_TLS_LE,
obj.R_ARM64_TLS_IE:
r.Done = 0
r.Xsym = r.Sym
r.Xadd = r.Add
return 0
}
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
case obj.R_ADDRARM64:
t := ld.Symaddr(r.Sym) + r.Add - ((s.Value + int64(r.Off)) &^ 0xfff)
if t >= 1<<32 || t < -1<<32 {
ld.Diag("program too large, address relocation distance = %d", t)
}
var o0, o1 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o0 = uint32(*val >> 32)
o1 = uint32(*val)
} else {
o0 = uint32(*val)
o1 = uint32(*val >> 32)
}
o0 |= (uint32((t>>12)&3) << 29) | (uint32((t>>12>>2)&0x7ffff) << 5)
o1 |= uint32(t&0xfff) << 10
// when laid out, the instruction order must always be o1, o2.
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o0)<<32 | int64(o1)
} else {
*val = int64(o1)<<32 | int64(o0)
}
return 0
case obj.R_ARM64_TLS_LE:
r.Done = 0
if ld.HEADTYPE != obj.Hlinux {
ld.Diag("TLS reloc on unsupported OS %s", ld.Headstr(int(ld.HEADTYPE)))
}
// The TCB is two pointers. This is not documented anywhere, but is
// de facto part of the ABI.
v := r.Sym.Value + int64(2*ld.Thearch.Ptrsize)
if v < 0 || v >= 32678 {
ld.Diag("TLS offset out of range %d", v)
}
*val |= v << 5
return 0
case obj.R_CALLARM64:
t := (ld.Symaddr(r.Sym) + r.Add) - (s.Value + int64(r.Off))
if t >= 1<<27 || t < -1<<27 {
ld.Diag("program too large, call relocation distance = %d", t)
}
*val |= (t >> 2) & 0x03ffffff
return 0
}
return -1
}
func adddynrel(s *ld.LSym, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_ARM_PLT32:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
case 256 + ld.R_ARM_THM_PC22: // R_ARM_THM_CALL
ld.Exitf("R_ARM_THM_CALL, are you using -marm?")
return
case 256 + ld.R_ARM_GOT32: // R_ARM_GOT_BREL
if targ.Type != obj.SDYNIMPORT {
addgotsyminternal(ld.Ctxt, targ)
} else {
addgotsym(ld.Ctxt, targ)
}
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
r.Add += int64(targ.Got)
return
case 256 + ld.R_ARM_GOT_PREL: // GOT(nil) + A - nil
if targ.Type != obj.SDYNIMPORT {
addgotsyminternal(ld.Ctxt, targ)
} else {
addgotsym(ld.Ctxt, targ)
}
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got) + 4
return
case 256 + ld.R_ARM_GOTOFF: // R_ARM_GOTOFF32
r.Type = obj.R_GOTOFF
return
case 256 + ld.R_ARM_GOTPC: // R_ARM_BASE_PREL
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += 4
return
case 256 + ld.R_ARM_CALL:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
case 256 + ld.R_ARM_REL32: // R_ARM_REL32
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_ARM_ABS32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_ARM_ABS32 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
// we can just ignore this, because we are targeting ARM V5+ anyway
case 256 + ld.R_ARM_V4BX:
if r.Sym != nil {
// R_ARM_V4BX is ABS relocation, so this symbol is a dummy symbol, ignore it
r.Sym.Type = 0
}
r.Sym = nil
return
case 256 + ld.R_ARM_PC24,
256 + ld.R_ARM_JUMP24:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALLARM:
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
case obj.R_ADDR:
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ld.Ctxt, targ)
rel := ld.Linklookup(ld.Ctxt, ".rel", 0)
ld.Addaddrplus(ld.Ctxt, rel, s, int64(r.Off))
ld.Adduint32(ld.Ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_ARM_GLOB_DAT)) // we need a nil + A dynamic reloc
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
return
}
}
ld.Ctxt.Cursym = s
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func archinit() {
// getgoextlinkenabled is based on GO_EXTLINK_ENABLED when
// Go was built; see ../../make.bash.
if ld.Linkmode == ld.LinkAuto && obj.Getgoextlinkenabled() == "0" {
ld.Linkmode = ld.LinkInternal
}
if ld.Buildmode == ld.BuildmodeCShared || ld.Buildmode == ld.BuildmodePIE || ld.DynlinkingGo() {
ld.Linkmode = ld.LinkExternal
got := ld.Linklookup(ld.Ctxt, "_GLOBAL_OFFSET_TABLE_", 0)
got.Type = obj.SDYNIMPORT
got.Reachable = true
}
switch ld.HEADTYPE {
default:
if ld.Linkmode == ld.LinkAuto {
ld.Linkmode = ld.LinkInternal
}
if ld.Linkmode == ld.LinkExternal && obj.Getgoextlinkenabled() != "1" {
log.Fatalf("cannot use -linkmode=external with -H %s", ld.Headstr(int(ld.HEADTYPE)))
}
case obj.Hdarwin,
obj.Hfreebsd,
obj.Hlinux,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hwindows:
break
}
switch ld.HEADTYPE {
default:
ld.Exitf("unknown -H option: %v", ld.HEADTYPE)
case obj.Hplan9: /* plan 9 */
ld.HEADR = 32
if ld.INITTEXT == -1 {
ld.INITTEXT = 4096 + 32
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 4096
}
case obj.Hdarwin: /* apple MACH */
ld.Machoinit()
ld.HEADR = ld.INITIAL_MACHO_HEADR
if ld.INITTEXT == -1 {
ld.INITTEXT = 4096 + int64(ld.HEADR)
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 4096
}
case obj.Hlinux, /* elf32 executable */
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd:
ld.Elfinit()
ld.HEADR = ld.ELFRESERVE
if ld.INITTEXT == -1 {
ld.INITTEXT = 0x08048000 + int64(ld.HEADR)
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 4096
}
case obj.Hnacl:
ld.Elfinit()
ld.HEADR = 0x10000
ld.Funcalign = 32
if ld.INITTEXT == -1 {
ld.INITTEXT = 0x20000
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 0x10000
}
case obj.Hwindows: /* PE executable */
ld.Peinit()
ld.HEADR = ld.PEFILEHEADR
if ld.INITTEXT == -1 {
ld.INITTEXT = ld.PEBASE + int64(ld.PESECTHEADR)
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = ld.PESECTALIGN
}
}
if ld.INITDAT != 0 && ld.INITRND != 0 {
fmt.Printf("warning: -D0x%x is ignored because of -R0x%x\n", uint64(ld.INITDAT), uint32(ld.INITRND))
}
}
func adddynrel(s *ld.LSym, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_386_PC32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_386_PC32 relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ld.Diag("unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_386_PLT32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_386_GOT32, 256 + ld.R_386_GOT32X:
if targ.Type != obj.SDYNIMPORT {
// have symbol
if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
// turn MOVL of GOT entry into LEAL of symbol address, relative to GOT.
s.P[r.Off-2] = 0x8d
r.Type = obj.R_GOTOFF
return
}
if r.Off >= 2 && s.P[r.Off-2] == 0xff && s.P[r.Off-1] == 0xb3 {
// turn PUSHL of GOT entry into PUSHL of symbol itself.
// use unnecessary SS prefix to keep instruction same length.
s.P[r.Off-2] = 0x36
s.P[r.Off-1] = 0x68
r.Type = obj.R_ADDR
return
}
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
return
}
addgotsym(ld.Ctxt, targ)
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
r.Add += int64(targ.Got)
return
case 256 + ld.R_386_GOTOFF:
r.Type = obj.R_GOTOFF
return
case 256 + ld.R_386_GOTPC:
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += 4
return
case 256 + ld.R_386_32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_386_32 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 0:
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 1:
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
r.Type = obj.R_PCREL
return
}
r.Type = obj.R_PCREL
return
case 512 + ld.MACHO_FAKE_GOTPCREL:
if targ.Type != obj.SDYNIMPORT {
// have symbol
// turn MOVL of GOT entry into LEAL of symbol itself
if r.Off < 2 || s.P[r.Off-2] != 0x8b {
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
return
}
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
return
}
addgotsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
r.Type = obj.R_PCREL
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALL,
obj.R_PCREL:
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
case obj.R_ADDR:
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ld.Ctxt, targ)
rel := ld.Linklookup(ld.Ctxt, ".rel", 0)
ld.Addaddrplus(ld.Ctxt, rel, s, int64(r.Off))
ld.Adduint32(ld.Ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_386_32))
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
return
}
if ld.HEADTYPE == obj.Hdarwin && s.Size == PtrSize && r.Off == 0 {
// Mach-O relocations are a royal pain to lay out.
// They use a compact stateful bytecode representation
// that is too much bother to deal with.
// Instead, interpret the C declaration
// void *_Cvar_stderr = &stderr;
// as making _Cvar_stderr the name of a GOT entry
// for stderr. This is separate from the usual GOT entry,
// just in case the C code assigns to the variable,
// and of course it only works for single pointers,
// but we only need to support cgo and that's all it needs.
ld.Adddynsym(ld.Ctxt, targ)
got := ld.Linklookup(ld.Ctxt, ".got", 0)
s.Type = got.Type | obj.SSUB
s.Outer = got
s.Sub = got.Sub
got.Sub = s
s.Value = got.Size
ld.Adduint32(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hwindows && s.Size == PtrSize {
// nothing to do, the relocation will be laid out in pereloc1
return
}
}
ld.Ctxt.Cursym = s
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func asmb() {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f asmb\n", obj.Cputime())
}
ld.Bso.Flush()
if ld.Iself {
ld.Asmbelfsetup()
}
sect := ld.Segtext.Sect
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Codeblk(int64(sect.Vaddr), int64(sect.Length))
for sect = sect.Next; sect != nil; sect = sect.Next {
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Datblk(int64(sect.Vaddr), int64(sect.Length))
}
if ld.Segrodata.Filelen > 0 {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f rodatblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segrodata.Fileoff))
ld.Datblk(int64(ld.Segrodata.Vaddr), int64(ld.Segrodata.Filelen))
}
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f datblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segdata.Fileoff))
ld.Datblk(int64(ld.Segdata.Vaddr), int64(ld.Segdata.Filelen))
/* output symbol table */
ld.Symsize = 0
ld.Lcsize = 0
symo := uint32(0)
if ld.Debug['s'] == 0 {
// TODO: rationalize
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f sym\n", obj.Cputime())
}
ld.Bso.Flush()
switch ld.HEADTYPE {
default:
if ld.Iself {
symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
symo = uint32(ld.Rnd(int64(symo), int64(ld.INITRND)))
}
case obj.Hplan9:
symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
}
ld.Cseek(int64(symo))
switch ld.HEADTYPE {
default:
if ld.Iself {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f elfsym\n", obj.Cputime())
}
ld.Asmelfsym()
ld.Cflush()
ld.Cwrite(ld.Elfstrdat)
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
ld.Dwarfemitdebugsections()
if ld.Linkmode == ld.LinkExternal {
ld.Elfemitreloc()
}
}
case obj.Hplan9:
ld.Asmplan9sym()
ld.Cflush()
sym := ld.Linklookup(ld.Ctxt, "pclntab", 0)
if sym != nil {
ld.Lcsize = int32(len(sym.P))
for i := 0; int32(i) < ld.Lcsize; i++ {
ld.Cput(uint8(sym.P[i]))
}
ld.Cflush()
}
}
}
ld.Ctxt.Cursym = nil
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f header\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(0)
switch ld.HEADTYPE {
default:
case obj.Hplan9: /* plan 9 */
magic := uint32(4*18*18 + 7)
if ld.Thestring == "mips64le" {
magic = uint32(4*26*26 + 7)
}
ld.Thearch.Lput(uint32(magic)) /* magic */
ld.Thearch.Lput(uint32(ld.Segtext.Filelen)) /* sizes */
ld.Thearch.Lput(uint32(ld.Segdata.Filelen))
ld.Thearch.Lput(uint32(ld.Segdata.Length - ld.Segdata.Filelen))
ld.Thearch.Lput(uint32(ld.Symsize)) /* nsyms */
ld.Thearch.Lput(uint32(ld.Entryvalue())) /* va of entry */
ld.Thearch.Lput(0)
ld.Thearch.Lput(uint32(ld.Lcsize))
case obj.Hlinux,
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hnacl:
ld.Asmbelf(int64(symo))
}
ld.Cflush()
if ld.Debug['c'] != 0 {
fmt.Printf("textsize=%d\n", ld.Segtext.Filelen)
fmt.Printf("datsize=%d\n", ld.Segdata.Filelen)
fmt.Printf("bsssize=%d\n", ld.Segdata.Length-ld.Segdata.Filelen)
fmt.Printf("symsize=%d\n", ld.Symsize)
fmt.Printf("lcsize=%d\n", ld.Lcsize)
fmt.Printf("total=%d\n", ld.Segtext.Filelen+ld.Segdata.Length+uint64(ld.Symsize)+uint64(ld.Lcsize))
}
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
switch r.Type {
case obj.R_CALLARM:
r.Done = 0
// set up addend for eventual relocation via outer symbol.
rs := r.Sym
r.Xadd = r.Add
if r.Xadd&0x800000 != 0 {
r.Xadd |= ^0xffffff
}
r.Xadd *= 4
for rs.Outer != nil {
r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
rs = rs.Outer
}
if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
ld.Diag("missing section for %s", rs.Name)
}
r.Xsym = rs
// ld64 for arm seems to want the symbol table to contain offset
// into the section rather than pseudo virtual address that contains
// the section load address.
// we need to compensate that by removing the instruction's address
// from addend.
if ld.HEADTYPE == obj.Hdarwin {
r.Xadd -= ld.Symaddr(s) + int64(r.Off)
}
*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32(r.Xadd/4))))
return 0
}
return -1
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
// The following three arch specific relocations are only for generation of
// Linux/ARM ELF's PLT entry (3 assembler instruction)
case obj.R_PLT0: // add ip, pc, #0xXX00000
if ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got.plt", 0)) < ld.Symaddr(ld.Linklookup(ld.Ctxt, ".plt", 0)) {
ld.Diag(".got.plt should be placed after .plt section.")
}
*val = 0xe28fc600 + (0xff & (int64(uint32(ld.Symaddr(r.Sym)-(ld.Symaddr(ld.Linklookup(ld.Ctxt, ".plt", 0))+int64(r.Off))+r.Add)) >> 20))
return 0
case obj.R_PLT1: // add ip, ip, #0xYY000
*val = 0xe28cca00 + (0xff & (int64(uint32(ld.Symaddr(r.Sym)-(ld.Symaddr(ld.Linklookup(ld.Ctxt, ".plt", 0))+int64(r.Off))+r.Add+4)) >> 12))
return 0
case obj.R_PLT2: // ldr pc, [ip, #0xZZZ]!
*val = 0xe5bcf000 + (0xfff & int64(uint32(ld.Symaddr(r.Sym)-(ld.Symaddr(ld.Linklookup(ld.Ctxt, ".plt", 0))+int64(r.Off))+r.Add+8)))
return 0
case obj.R_CALLARM: // bl XXXXXX or b YYYYYY
*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32((ld.Symaddr(r.Sym)+int64((uint32(r.Add))*4)-(s.Value+int64(r.Off)))/4))))
return 0
}
return -1
}
func asmb() {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f asmb\n", obj.Cputime())
}
ld.Bso.Flush()
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f codeblk\n", obj.Cputime())
}
ld.Bso.Flush()
if ld.Iself {
ld.Asmbelfsetup()
}
sect := ld.Segtext.Sect
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Codeblk(int64(sect.Vaddr), int64(sect.Length))
for sect = sect.Next; sect != nil; sect = sect.Next {
ld.Cseek(int64(sect.Vaddr - ld.Segtext.Vaddr + ld.Segtext.Fileoff))
ld.Datblk(int64(sect.Vaddr), int64(sect.Length))
}
if ld.Segrodata.Filelen > 0 {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f rodatblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segrodata.Fileoff))
ld.Datblk(int64(ld.Segrodata.Vaddr), int64(ld.Segrodata.Filelen))
}
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f datblk\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(int64(ld.Segdata.Fileoff))
ld.Datblk(int64(ld.Segdata.Vaddr), int64(ld.Segdata.Filelen))
machlink := int64(0)
if ld.HEADTYPE == obj.Hdarwin {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
dwarfoff := ld.Rnd(int64(uint64(ld.HEADR)+ld.Segtext.Length), int64(ld.INITRND)) + ld.Rnd(int64(ld.Segdata.Filelen), int64(ld.INITRND))
ld.Cseek(dwarfoff)
ld.Segdwarf.Fileoff = uint64(ld.Cpos())
ld.Dwarfemitdebugsections()
ld.Segdwarf.Filelen = uint64(ld.Cpos()) - ld.Segdwarf.Fileoff
machlink = ld.Domacholink()
}
switch ld.HEADTYPE {
default:
ld.Diag("unknown header type %d", ld.HEADTYPE)
fallthrough
case obj.Hplan9,
obj.Helf:
break
case obj.Hdarwin:
ld.Debug['8'] = 1 /* 64-bit addresses */
case obj.Hlinux,
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hdragonfly,
obj.Hsolaris:
ld.Debug['8'] = 1 /* 64-bit addresses */
case obj.Hnacl,
obj.Hwindows:
break
}
ld.Symsize = 0
ld.Spsize = 0
ld.Lcsize = 0
symo := int64(0)
if ld.Debug['s'] == 0 {
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f sym\n", obj.Cputime())
}
ld.Bso.Flush()
switch ld.HEADTYPE {
default:
case obj.Hplan9,
obj.Helf:
ld.Debug['s'] = 1
symo = int64(ld.Segdata.Fileoff + ld.Segdata.Filelen)
case obj.Hdarwin:
symo = int64(ld.Segdwarf.Fileoff + uint64(ld.Rnd(int64(ld.Segdwarf.Filelen), int64(ld.INITRND))) + uint64(machlink))
case obj.Hlinux,
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hdragonfly,
obj.Hsolaris,
obj.Hnacl:
symo = int64(ld.Segdata.Fileoff + ld.Segdata.Filelen)
symo = ld.Rnd(symo, int64(ld.INITRND))
case obj.Hwindows:
symo = int64(ld.Segdata.Fileoff + ld.Segdata.Filelen)
symo = ld.Rnd(symo, ld.PEFILEALIGN)
}
ld.Cseek(symo)
switch ld.HEADTYPE {
default:
if ld.Iself {
ld.Cseek(symo)
ld.Asmelfsym()
ld.Cflush()
ld.Cwrite(ld.Elfstrdat)
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
ld.Dwarfemitdebugsections()
if ld.Linkmode == ld.LinkExternal {
ld.Elfemitreloc()
}
}
case obj.Hplan9:
ld.Asmplan9sym()
ld.Cflush()
sym := ld.Linklookup(ld.Ctxt, "pclntab", 0)
if sym != nil {
ld.Lcsize = int32(len(sym.P))
for i := 0; int32(i) < ld.Lcsize; i++ {
ld.Cput(uint8(sym.P[i]))
}
ld.Cflush()
}
case obj.Hwindows:
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
}
ld.Dwarfemitdebugsections()
case obj.Hdarwin:
if ld.Linkmode == ld.LinkExternal {
ld.Machoemitreloc()
}
}
}
if ld.Debug['v'] != 0 {
fmt.Fprintf(&ld.Bso, "%5.2f headr\n", obj.Cputime())
}
ld.Bso.Flush()
ld.Cseek(0)
switch ld.HEADTYPE {
default:
case obj.Hplan9: /* plan9 */
magic := int32(4*26*26 + 7)
magic |= 0x00008000 /* fat header */
ld.Lputb(uint32(magic)) /* magic */
ld.Lputb(uint32(ld.Segtext.Filelen)) /* sizes */
ld.Lputb(uint32(ld.Segdata.Filelen))
ld.Lputb(uint32(ld.Segdata.Length - ld.Segdata.Filelen))
ld.Lputb(uint32(ld.Symsize)) /* nsyms */
vl := ld.Entryvalue()
ld.Lputb(PADDR(uint32(vl))) /* va of entry */
ld.Lputb(uint32(ld.Spsize)) /* sp offsets */
ld.Lputb(uint32(ld.Lcsize)) /* line offsets */
ld.Vputb(uint64(vl)) /* va of entry */
case obj.Hdarwin:
ld.Asmbmacho()
case obj.Hlinux,
obj.Hfreebsd,
obj.Hnetbsd,
obj.Hopenbsd,
obj.Hdragonfly,
obj.Hsolaris,
obj.Hnacl:
ld.Asmbelf(symo)
case obj.Hwindows:
ld.Asmbpe()
}
ld.Cflush()
}
func archinit() {
// getgoextlinkenabled is based on GO_EXTLINK_ENABLED when
// Go was built; see ../../make.bash.
if ld.Linkmode == ld.LinkAuto && obj.Getgoextlinkenabled() == "0" {
ld.Linkmode = ld.LinkInternal
}
switch ld.Buildmode {
case ld.BuildmodePIE, ld.BuildmodeShared:
ld.Linkmode = ld.LinkExternal
}
if ld.Linkshared {
ld.Linkmode = ld.LinkExternal
}
if ld.Linkmode == ld.LinkExternal {
toc := ld.Linklookup(ld.Ctxt, ".TOC.", 0)
toc.Type = obj.SDYNIMPORT
}
switch ld.HEADTYPE {
default:
if ld.Linkmode == ld.LinkAuto {
ld.Linkmode = ld.LinkInternal
}
if ld.Linkmode == ld.LinkExternal && obj.Getgoextlinkenabled() != "1" {
log.Fatalf("cannot use -linkmode=external with -H %s", ld.Headstr(int(ld.HEADTYPE)))
}
case obj.Hlinux:
break
}
switch ld.HEADTYPE {
default:
ld.Exitf("unknown -H option: %v", ld.HEADTYPE)
case obj.Hplan9: /* plan 9 */
ld.HEADR = 32
if ld.INITTEXT == -1 {
ld.INITTEXT = 4128
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 4096
}
case obj.Hlinux: /* ppc64 elf */
if ld.Thestring == "ppc64" {
ld.Debug['d'] = 1 // TODO(austin): ELF ABI v1 not supported yet
}
ld.Elfinit()
ld.HEADR = ld.ELFRESERVE
if ld.INITTEXT == -1 {
ld.INITTEXT = 0x10000 + int64(ld.HEADR)
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 0x10000
}
case obj.Hnacl:
ld.Elfinit()
ld.HEADR = 0x10000
ld.Funcalign = 16
if ld.INITTEXT == -1 {
ld.INITTEXT = 0x20000
}
if ld.INITDAT == -1 {
ld.INITDAT = 0
}
if ld.INITRND == -1 {
ld.INITRND = 0x10000
}
}
if ld.INITDAT != 0 && ld.INITRND != 0 {
fmt.Printf("warning: -D0x%x is ignored because of -R0x%x\n", uint64(ld.INITDAT), uint32(ld.INITRND))
}
}
