func DetachNotifyHandler(hwnd uint32) {
key := uintptr(hwnd)
if _, exists := notifyHandlers[key]; exists {
C.HTMLayoutSetCallback(C.HWND(C.HANDLE(key)), nil, nil)
delete(notifyHandlers, key)
}
}
func RootElement(hwnd uint32) *Element {
var handle HELEMENT = BAD_HELEMENT
if ret := C.HTMLayoutGetRootElement(C.HWND(C.HANDLE(uintptr(hwnd))), (*C.HELEMENT)(&handle)); ret != HLDOM_OK {
domPanic(ret, "Failed to get root element")
}
return NewElementFromHandle(handle)
}
func (dbp *Process) requestManualStop() error {
res := C.DebugBreakProcess(C.HANDLE(dbp.os.hProcess))
if res == C.FALSE {
return fmt.Errorf("failed to break process %d", dbp.Pid)
}
return nil
}
// Load html contents into window
func LoadHtml(hwnd uint32, data []byte, baseUrl string) error {
if len(data) > 0 {
if ok := C.HTMLayoutLoadHtmlEx(C.HWND(C.HANDLE(uintptr(hwnd))), (*C.BYTE)(&data[0]),
C.UINT(len(data)), (*C.WCHAR)(stringToUtf16Ptr(baseUrl))); ok == 0 {
return errors.New("HTMLayoutLoadHtmlEx failed")
}
}
return nil
}
// SetPC sets the RIP register to the value specified by `pc`.
func (r *Regs) SetPC(thread *Thread, pc uint64) error {
var context C.CONTEXT
context.ContextFlags = C.CONTEXT_ALL
res := C.GetThreadContext(C.HANDLE(thread.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not GetThreadContext")
}
context.Rip = C.DWORD64(pc)
res = C.SetThreadContext(C.HANDLE(thread.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not SetThreadContext")
}
return nil
}
func FocusedElement(hwnd uint32) *Element {
var handle HELEMENT = BAD_HELEMENT
if ret := C.HTMLayoutGetFocusElement(C.HWND(C.HANDLE(uintptr(hwnd))), (*C.HELEMENT)(&handle)); ret != HLDOM_OK {
domPanic(ret, "Failed to get focus element")
}
if handle != BAD_HELEMENT {
return NewElementFromHandle(handle)
}
return nil
}
func DetachWindowEventHandler(hwnd uint32) {
key := uintptr(hwnd)
if handler, exists := windowEventHandlers[hwnd]; exists {
tag := uintptr(unsafe.Pointer(handler))
if ret := C.HTMLayoutWindowDetachEventHandler(C.HWND(C.HANDLE(key)), (*[0]byte)(unsafe.Pointer(goElementProc)), C.LPVOID(tag)); ret != HLDOM_OK {
domPanic(ret, "Failed to detach event handler from window")
}
delete(windowEventHandlers, hwnd)
}
}
func newHandle(c *Config) (handle syscall.Handle, err error) {
handle, err = syscall.CreateFile(
syscall.StringToUTF16Ptr(c.Address),
syscall.GENERIC_READ|syscall.GENERIC_WRITE,
0, // mode
nil, // security
syscall.OPEN_EXISTING, // create mode
0, // attributes
0) // templates
if err != nil {
return
}
defer func() {
if err != nil {
syscall.CloseHandle(handle)
}
}()
var dcb C.DCB
dcb.BaudRate = C.DWORD(c.BaudRate)
// Data bits
if c.DataBits == 0 {
dcb.ByteSize = 8
} else {
dcb.ByteSize = C.BYTE(c.DataBits)
}
// Stop bits
switch c.StopBits {
case 0, 1:
// Default is one stop bit.
dcb.StopBits = C.ONESTOPBIT
case 2:
dcb.StopBits = C.TWOSTOPBITS
default:
err = fmt.Errorf("serial: unsupported stop bits %v", c.StopBits)
return
}
// Parity
switch c.Parity {
case "", "E":
// Default parity mode is Even.
dcb.Parity = C.EVENPARITY
case "O":
dcb.Parity = C.ODDPARITY
case "N":
dcb.Parity = C.NOPARITY
default:
err = fmt.Errorf("serial: unsupported parity %v", c.Parity)
return
}
if C.SetCommState(C.HANDLE(handle), &dcb) == 0 {
err = fmt.Errorf("serial: could not set device state: %v", syscall.GetLastError())
return
}
return
}
func registers(thread *Thread) (Registers, error) {
var context C.CONTEXT
context.ContextFlags = C.CONTEXT_ALL
res := C.GetThreadContext(C.HANDLE(thread.os.hThread), &context)
if res == C.FALSE {
return nil, fmt.Errorf("failed to read ThreadContext")
}
var threadInfo C.THREAD_BASIC_INFORMATION
res = C.thread_basic_information(C.HANDLE(thread.os.hThread), &threadInfo)
if res == C.FALSE {
return nil, fmt.Errorf("failed to get thread_basic_information")
}
tls := uintptr(threadInfo.TebBaseAddress)
regs := &Regs{
rax: uint64(context.Rax),
rbx: uint64(context.Rbx),
rcx: uint64(context.Rcx),
rdx: uint64(context.Rdx),
rdi: uint64(context.Rdi),
rsi: uint64(context.Rsi),
rbp: uint64(context.Rbp),
rsp: uint64(context.Rsp),
r8: uint64(context.R8),
r9: uint64(context.R9),
r10: uint64(context.R10),
r11: uint64(context.R11),
r12: uint64(context.R12),
r13: uint64(context.R13),
r14: uint64(context.R14),
r15: uint64(context.R15),
rip: uint64(context.Rip),
eflags: uint64(context.EFlags),
cs: uint64(context.SegCs),
fs: uint64(context.SegFs),
gs: uint64(context.SegGs),
tls: uint64(tls),
}
return regs, nil
}
func AttachWindowEventHandler(hwnd uint32, handler *EventHandler) {
key := uintptr(hwnd)
tag := uintptr(unsafe.Pointer(handler))
if _, exists := windowEventHandlers[hwnd]; exists {
if ret := C.HTMLayoutWindowDetachEventHandler(C.HWND(C.HANDLE(key)), (*[0]byte)(unsafe.Pointer(goElementProc)), C.LPVOID(tag)); ret != HLDOM_OK {
domPanic(ret, "Failed to detach event handler from window before adding the new one")
}
}
// Overwrite if it exists
windowEventHandlers[hwnd] = handler
// Don't let the caller disable ATTACH/DETACH events, otherwise we
// won't know when to throw out our event handler object
subscription := handler.Subscription()
subscription &= ^uint32(DISABLE_INITIALIZATION & 0xffffffff)
if ret := C.HTMLayoutWindowAttachEventHandler(C.HWND(C.HANDLE(key)), (*[0]byte)(unsafe.Pointer(goElementProc)), C.LPVOID(tag), C.UINT(subscription)); ret != HLDOM_OK {
domPanic(ret, "Failed to attach event handler to window")
}
}
func (t *Thread) writeMemory(addr uintptr, data []byte) (int, error) {
var (
vmData = C.LPCVOID(unsafe.Pointer(&data[0]))
vmAddr = C.LPVOID(addr)
length = C.SIZE_T(len(data))
count C.SIZE_T
)
ret := C.WriteProcessMemory(C.HANDLE(t.dbp.os.hProcess), vmAddr, vmData, length, &count)
if ret == C.FALSE {
return int(count), fmt.Errorf("could not write memory")
}
return int(count), nil
}
// Kill kills the process.
func (dbp *Process) Kill() error {
if dbp.exited {
return nil
}
if !dbp.Threads[dbp.Pid].Stopped() {
return errors.New("process must be stopped in order to kill it")
}
// TODO: Should not have to ignore failures here,
// but some tests appear to Kill twice causing
// this to fail on second attempt.
_ = C.TerminateProcess(C.HANDLE(dbp.os.hProcess), 1)
dbp.exited = true
return nil
}
func (t *Thread) readMemory(addr uintptr, size int) ([]byte, error) {
if size == 0 {
return nil, nil
}
var (
buf = make([]byte, size)
vmData = C.LPVOID(unsafe.Pointer(&buf[0]))
vmAddr = C.LPCVOID(addr)
length = C.SIZE_T(size)
count C.SIZE_T
)
ret := C.ReadProcessMemory(C.HANDLE(t.dbp.os.hProcess), vmAddr, vmData, length, &count)
if ret == C.FALSE {
return nil, fmt.Errorf("could not read memory")
}
return buf, nil
}
func registers(thread *Thread) (Registers, error) {
var context C.CONTEXT
context.ContextFlags = C.CONTEXT_ALL
res := C.GetThreadContext(C.HANDLE(thread.os.hThread), &context)
if res == C.FALSE {
return nil, fmt.Errorf("failed to read ThreadContext")
}
var threadInfo _THREAD_BASIC_INFORMATION
status := _NtQueryInformationThread(syscall.Handle(thread.os.hThread), _ThreadBasicInformation, uintptr(unsafe.Pointer(&threadInfo)), uint32(unsafe.Sizeof(threadInfo)), nil)
if !_NT_SUCCESS(status) {
return nil, fmt.Errorf("failed to get thread_basic_information")
}
regs := &Regs{
rax: uint64(context.Rax),
rbx: uint64(context.Rbx),
rcx: uint64(context.Rcx),
rdx: uint64(context.Rdx),
rdi: uint64(context.Rdi),
rsi: uint64(context.Rsi),
rbp: uint64(context.Rbp),
rsp: uint64(context.Rsp),
r8: uint64(context.R8),
r9: uint64(context.R9),
r10: uint64(context.R10),
r11: uint64(context.R11),
r12: uint64(context.R12),
r13: uint64(context.R13),
r14: uint64(context.R14),
r15: uint64(context.R15),
rip: uint64(context.Rip),
eflags: uint64(context.EFlags),
cs: uint64(context.SegCs),
fs: uint64(context.SegFs),
gs: uint64(context.SegGs),
tls: uint64(threadInfo.TebBaseAddress),
}
return regs, nil
}
// Open connects to the given serial port.
func (p *port) Open(c *Config) (err error) {
handle, err := newHandle(c)
if err != nil {
return
}
// Read and write timeout
if c.Timeout > 0 {
timeout := C.DWORD(c.Timeout.Nanoseconds() / 1E6)
var timeouts C.COMMTIMEOUTS
// wait until a byte arrived or time out
timeouts.ReadIntervalTimeout = C.MAXDWORD
timeouts.ReadTotalTimeoutMultiplier = C.MAXDWORD
timeouts.ReadTotalTimeoutConstant = timeout
timeouts.WriteTotalTimeoutMultiplier = 0
timeouts.WriteTotalTimeoutConstant = timeout
if C.SetCommTimeouts(C.HANDLE(handle), &timeouts) == 0 {
err = fmt.Errorf("serial: could not set timeout: %v", syscall.GetLastError())
syscall.CloseHandle(handle)
return
}
}
p.handle = handle
return
}
func (dbp *Process) waitForDebugEvent() (threadID, exitCode int, err error) {
var debugEvent C.DEBUG_EVENT
for {
// Wait for a debug event...
res := C.WaitForDebugEvent(&debugEvent, C.INFINITE)
if res == C.FALSE {
return 0, 0, fmt.Errorf("could not WaitForDebugEvent")
}
// ... handle each event kind ...
unionPtr := unsafe.Pointer(&debugEvent.u[0])
switch debugEvent.dwDebugEventCode {
case C.CREATE_PROCESS_DEBUG_EVENT:
debugInfo := (*C.CREATE_PROCESS_DEBUG_INFO)(unionPtr)
hFile := debugInfo.hFile
if hFile != C.HANDLE(uintptr(0)) /* NULL */ && hFile != C.HANDLE(uintptr(0xFFFFFFFFFFFFFFFF)) /* INVALID_HANDLE_VALUE */ {
res = C.CloseHandle(hFile)
if res == C.FALSE {
return 0, 0, fmt.Errorf("could not close create process file handle")
}
}
dbp.os.hProcess = sys.Handle(debugInfo.hProcess)
_, err = dbp.addThread(sys.Handle(debugInfo.hThread), int(debugEvent.dwThreadId), false)
if err != nil {
return 0, 0, err
}
break
case C.CREATE_THREAD_DEBUG_EVENT:
debugInfo := (*C.CREATE_THREAD_DEBUG_INFO)(unionPtr)
_, err = dbp.addThread(sys.Handle(debugInfo.hThread), int(debugEvent.dwThreadId), false)
if err != nil {
return 0, 0, err
}
break
case C.EXIT_THREAD_DEBUG_EVENT:
delete(dbp.Threads, int(debugEvent.dwThreadId))
break
case C.OUTPUT_DEBUG_STRING_EVENT:
//TODO: Handle debug output strings
break
case C.LOAD_DLL_DEBUG_EVENT:
debugInfo := (*C.LOAD_DLL_DEBUG_INFO)(unionPtr)
hFile := debugInfo.hFile
if hFile != C.HANDLE(uintptr(0)) /* NULL */ && hFile != C.HANDLE(uintptr(0xFFFFFFFFFFFFFFFF)) /* INVALID_HANDLE_VALUE */ {
res = C.CloseHandle(hFile)
if res == C.FALSE {
return 0, 0, fmt.Errorf("could not close DLL load file handle")
}
}
break
case C.UNLOAD_DLL_DEBUG_EVENT:
break
case C.RIP_EVENT:
break
case C.EXCEPTION_DEBUG_EVENT:
tid := int(debugEvent.dwThreadId)
dbp.os.breakThread = tid
return tid, 0, nil
case C.EXIT_PROCESS_DEBUG_EVENT:
debugInfo := (*C.EXIT_PROCESS_DEBUG_INFO)(unionPtr)
return 0, int(debugInfo.dwExitCode), nil
default:
return 0, 0, fmt.Errorf("unknown debug event code: %d", debugEvent.dwDebugEventCode)
}
// .. and then continue unless we received an event that indicated we should break into debugger.
res = C.ContinueDebugEvent(debugEvent.dwProcessId, debugEvent.dwThreadId, C.DBG_CONTINUE)
if res == C.WINBOOL(0) {
return 0, 0, fmt.Errorf("could not ContinueDebugEvent")
}
}
}
func (t *Thread) singleStep() error {
var context C.CONTEXT
context.ContextFlags = C.CONTEXT_ALL
// Set the processor TRAP flag
res := C.GetThreadContext(C.HANDLE(t.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not GetThreadContext")
}
context.EFlags |= 0x100
res = C.SetThreadContext(C.HANDLE(t.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not SetThreadContext")
}
// Suspend all threads except this one
for _, thread := range t.dbp.Threads {
if thread.ID == t.ID {
continue
}
res := C.SuspendThread(C.HANDLE(thread.os.hThread))
if res == C.DWORD(0xFFFFFFFF) {
return fmt.Errorf("could not suspend thread: %d", thread.ID)
}
}
// Continue and wait for the step to complete
t.dbp.execPtraceFunc(func() {
res = C.ContinueDebugEvent(C.DWORD(t.dbp.Pid), C.DWORD(t.ID), C.DBG_CONTINUE)
})
if res == C.FALSE {
return fmt.Errorf("could not ContinueDebugEvent.")
}
_, err := t.dbp.trapWait(0)
if err != nil {
return err
}
// Resume all threads except this one
for _, thread := range t.dbp.Threads {
if thread.ID == t.ID {
continue
}
res := C.ResumeThread(C.HANDLE(thread.os.hThread))
if res == C.DWORD(0xFFFFFFFF) {
return fmt.Errorf("ould not resume thread: %d", thread.ID)
}
}
// Unset the processor TRAP flag
res = C.GetThreadContext(C.HANDLE(t.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not GetThreadContext")
}
context.EFlags &= ^C.DWORD(0x100)
res = C.SetThreadContext(C.HANDLE(t.os.hThread), &context)
if res == C.FALSE {
return fmt.Errorf("could not SetThreadContext")
}
return nil
}
func main() {
handle, err := syscall.CreateFile(syscall.StringToUTF16Ptr(port),
syscall.GENERIC_READ|syscall.GENERIC_WRITE,
0, // mode
nil, // security
syscall.OPEN_EXISTING, // no creating new
0,
0)
if err != nil {
fmt.Print(err)
return
}
fmt.Printf("handle created %d\n", handle)
defer syscall.CloseHandle(handle)
var dcb C.DCB
dcb.BaudRate = 9600
dcb.ByteSize = 8
dcb.StopBits = C.ONESTOPBIT
dcb.Parity = C.NOPARITY
if C.SetCommState(C.HANDLE(handle), &dcb) == 0 {
fmt.Printf("set comm state error %v\n", syscall.GetLastError())
return
}
fmt.Printf("set comm state succeed\n")
var timeouts C.COMMTIMEOUTS
// time-out between charactor for receiving (ms)
timeouts.ReadIntervalTimeout = 1000
timeouts.ReadTotalTimeoutMultiplier = 0
timeouts.ReadTotalTimeoutConstant = 1000
timeouts.WriteTotalTimeoutMultiplier = 0
timeouts.WriteTotalTimeoutConstant = 1000
if C.SetCommTimeouts(C.HANDLE(handle), &timeouts) == 0 {
fmt.Printf("set comm timeouts error %v\n", syscall.GetLastError())
return
}
fmt.Printf("set comm timeouts succeed\n")
var n uint32
data := []byte("abc")
err = syscall.WriteFile(handle, data, &n, nil)
if err != nil {
fmt.Println(err)
return
}
fmt.Printf("write file succeed\n")
fmt.Printf("Press Enter when ready for reading...")
reader := bufio.NewReader(os.Stdin)
_, _ = reader.ReadString('\n')
data = make([]byte, 512)
err = syscall.ReadFile(handle, data, &n, nil)
if err != nil {
fmt.Println(err)
return
}
fmt.Printf("received data %v:\n", n)
fmt.Printf("%x\n", data[:n])
fmt.Printf("closed\n")
}
// Main htmlayout wndproc
func ProcNoDefault(hwnd, msg uint32, wparam, lparam uintptr) (uintptr, bool) {
var handled C.BOOL = 0
var result C.LRESULT = C.HTMLayoutProcND(C.HWND(C.HANDLE(uintptr(hwnd))), C.UINT(msg),
C.WPARAM(wparam), C.LPARAM(lparam), &handled)
return uintptr(result), handled != 0
}
// Load resource (file or url) into window
func LoadResource(hwnd uint32, uri string) error {
if ok := C.HTMLayoutLoadFile(C.HWND(C.HANDLE(uintptr(hwnd))), (*C.WCHAR)(stringToUtf16Ptr(uri))); ok == 0 {
return errors.New("HTMLayoutLoadFile failed")
}
return nil
}
func AttachNotifyHandler(hwnd uint32, handler *NotifyHandler) {
key := uintptr(hwnd)
// Overwrite if it exists
notifyHandlers[key] = handler
C.HTMLayoutSetCallback(C.HWND(C.HANDLE(key)), (*[0]byte)(unsafe.Pointer(goNotifyProc)), C.LPVOID(key))
}
// Call this from your NotifyHandler.HandleLoadData method if you want htmlayout to
// process the data right away so you don't have to provide a buffer in the NmhlLoadData structure.
func DataReady(hwnd uint32, uri *uint16, data []byte) bool {
return C.HTMLayoutDataReady(C.HWND(C.HANDLE(uintptr(hwnd))), (*C.WCHAR)(uri), (*C.BYTE)(&data[0]), C.DWORD(len(data))) != 0
}
