// same as above but with StochasticGA
func TestThreeDimensionalPlaneNormalizedShouldPass2(t *testing.T) {
var err error
model := NewLogistic(base.StochasticGA, .0001, 0, 3000, nX, nY)
err = model.Learn()
assert.Nil(t, err, "Learning error should be nil")
var guess []float64
for i := -20; i < 20; i++ {
for j := -20; j < 20; j++ {
x := []float64{float64(i), float64(j)}
base.NormalizePoint(x)
guess, err = model.Predict(x, true)
if x[0]+x[1] > 5 {
assert.True(t, guess[0] > 0.5, "Guess should be more likely to be 1")
assert.True(t, guess[0] < 1.001, "Guess should not exceed 1 ever")
} else {
assert.True(t, guess[0] < 0.5, "Guess should be more likely to be 0")
assert.True(t, guess[0] > 0.0, "Guess should not be below 0 even")
}
assert.Len(t, guess, 1, "Length of a Logistic model output from the hypothesis should always be a 1 dimensional vector. Never multidimensional.")
assert.Nil(t, err, "Prediction error should be nil")
}
}
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
func (s *Softmax) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(s.Parameters) != 0 && len(x)+1 != len(s.Parameters[0]) {
return nil, fmt.Errorf("Error: Parameter vector should be 1 longer than input vector!\n\tLength of x given: %v\n\tLength of parameters: %v (len(theta[0]) = %v)\n", len(x), len(s.Parameters), len(s.Parameters[0]))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
result := make([]float64, s.k)
var denom float64
for i := 0; i < s.k; i++ {
// include constant term in sum
sum := s.Parameters[i][0]
for j := range x {
sum += x[j] * s.Parameters[i][j+1]
}
result[i] = math.Exp(sum)
denom += result[i]
}
for i := range result {
result[i] /= denom
}
return result, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
//
// if normalize is given as true, then the input will
// first be normalized to unit length. Only use this if
// you trained off of normalized inputs and are feeding
// an un-normalized input
func (k *KNN) Predict(x []float64, normalize ...bool) ([]float64, error) {
if k.K > len(k.trainingSet) {
return nil, fmt.Errorf("Given K (%v) is greater than the length of the training set", k.K)
}
if len(x) != len(k.trainingSet[0]) {
return nil, fmt.Errorf("Given x (len %v) does not match dimensions of training set", len(x))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
// initialize neighbors with first k
// training examples
neighbors := make([]nn, k.K)
length := len(k.trainingSet)
for i := range neighbors {
index := rand.Intn(length)
neighbors[i] = nn{
X: k.trainingSet[index],
Y: k.expectedResults[index],
Distance: k.Distance(x, k.trainingSet[index]),
}
}
// calculate nearest neighbors
var count int
for i := range k.trainingSet {
dist := k.Distance(x, k.trainingSet[i])
neighbors = insertSorted(nn{
X: k.trainingSet[i],
Y: k.expectedResults[i],
Distance: dist,
}, neighbors)
count++
}
// take weighted vote
sum := 0.0
for i := range neighbors {
sum += neighbors[i].Y
}
return []float64{round(sum / float64(k.K))}, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
func (p *KernelPerceptron) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
var sum float64
for i := range p.SV {
sum += p.SV[i].Y[0] * p.Kernel(p.SV[i].X, x)
}
result := -1.0
if sum > 0 {
result = 1
}
return []float64{result}, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
//
// if normalize is given as true, then the input will
// first be normalized to unit length. Only use this if
// you trained off of normalized inputs and are feeding
// an un-normalized input
func (l *LeastSquares) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(x)+1 != len(l.Parameters) {
return nil, fmt.Errorf("Error: Parameter vector should be 1 longer than input vector!\n\tLength of x given: %v\n\tLength of parameters: %v\n", len(x), len(l.Parameters))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
// include constant term in sum
sum := l.Parameters[0]
for i := range x {
sum += x[i] * l.Parameters[i+1]
}
return []float64{sum}, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
//
// if normalize is given as true, then the input will
// first be normalized to unit length. Only use this if
// you trained off of normalized inputs and are feeding
// an un-normalized input
func (k *TriangleKMeans) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(x) != len(k.Centroids[0]) {
return nil, fmt.Errorf("Error: Centroid vector should be the same length as input vector!\n\tLength of x given: %v\n\tLength of centroid: %v\n", len(x), len(k.Centroids[0]))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
var guess int
minDiff := diff(x, k.Centroids[0])
for j := 1; j < len(k.Centroids); j++ {
difference := diff(x, k.Centroids[j])
if difference < minDiff {
minDiff = difference
guess = j
}
}
return []float64{float64(guess)}, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
func (p *Perceptron) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(x)+1 != len(p.Parameters) {
return nil, fmt.Errorf("Error: Parameter vector should be 1 longer than input vector!\n\tLength of x given: %v\n\tLength of parameters: %v\n", len(x), len(p.Parameters))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
// include constant term in sum
sum := p.Parameters[0]
for i := range x {
sum += x[i] * p.Parameters[i+1]
}
result := -1.0
if sum > 0 {
result = 1
}
return []float64{result}, nil
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
//
// if normalize is given as true, then the input will
// first be normalized to unit length. Only use this if
// you trained off of normalized inputs and are feeding
// an un-normalized input
func (k *KNN) Predict(x []float64, normalize ...bool) ([]float64, error) {
if k.K > len(k.trainingSet) {
return nil, fmt.Errorf("Given K (%v) is greater than the length of the training set", k.K)
}
if len(x) != len(k.trainingSet[0]) {
return nil, fmt.Errorf("Given x (len %v) does not match dimensions of training set", len(x))
}
if len(normalize) != 0 && normalize[0] {
base.NormalizePoint(x)
}
// initialize the neighbors as an empty
// slice of Neighbors. insertSorted will
// take care of capping the neighbors at
// K.
neighbors := []nn{}
// calculate nearest neighbors
for i := range k.trainingSet {
dist := k.Distance(x, k.trainingSet[i])
neighbors = insertSorted(nn{
X: k.trainingSet[i],
Y: k.expectedResults[i],
Distance: dist,
}, neighbors, k.K)
}
// take weighted vote
sum := 0.0
for i := range neighbors {
sum += neighbors[i].Y
}
return []float64{round(sum / float64(k.K))}, nil
}
// OnlineLearn runs off of the datastream within the Perceptron
// structure. Whenever the model makes a wrong prediction
// the parameter vector theta is updated to reflect that,
// as discussed in the documentation for the Perceptron
// struct itself, and the OnUpdate function is called with
// the newly updated parameter vector. Learning will stop
// when the data channel is closed and all remaining
// datapoints within the channel have been read.
//
// The errors channel will be closed when learning is
// completed so you know when it's done if you're relying
// on that for whatever reason
//
// onUpdate func ([]float64):
//
// onUpdate is a function that is called whenever
// the perceptron updates it's parameter vector
// theta. This acts almost like a callback and
// passes the newly updated parameter vector
// theta as a slice of floats.
//
// This might be useful is you want to maintain
// an up to date persisted model in a database of
// your choosing and you'd like to update it
// constantly.
//
// This will be spawned into a new goroutine, so
// don't worry about the function taking a long
// time, or blocking.
//
// If you want to monitor errors happening within
// this function, just have a channel of errors
// you send do within this channel, or some other
// method if it fits your scenario better.
//
// NOTE that there is an optional last parameter which,
// when true, will normalize all data given on the
// stream. This will potentially help gradient descent
// converge faster. This is given as a parameter because
// you won't have direct access to the dataset before
// hand like you would in batch/stochastic settings.
//
// Example Online, Binary Perceptron (no layers, etc.):
//
// // create the channel of data and errors
// stream := make(chan base.Datapoint, 100)
// errors := make(chan error)
//
// model := NewPerceptron(0.1, 1, stream)
//
// go model.OnlineLearn(errors, stream, func (theta []float64) {
// // do something with the new theta (persist
// // to database?) in here.
// fmt.Printf("Theta updated to %v!\n", theta)
// })
//
// // start passing data to our datastream
// //
// // we could have data already in our channel
// // when we instantiated the Perceptron, though
// //
// // and note that this data could be coming from
// // some web server, or whatever!!
// go func() {
// for i := -500.0; abs(i) > 1; i *= -0.997 {
// if 10 + (i-20)/2 > 0 {
// stream <- base.Datapoint{
// X: []float64{i-20},
// Y: []float64{1.0},
// }
// } else {
// stream <- base.Datapoint{
// X: []float64{i-20},
// Y: []float64{0},
// }
// }
// }
// }()
//
// // close the dataset
// close(stream)
// for {
// err, more := <- errors
// if err != nil {
// fmt.Printf("Error passed: %v", err)
// } else {
// // training is done!
// break
// }
// }
//
// // now you can predict!!
// // note that guess is a []float64 of len() == 1
// // when it isn't nil
// guess, err := model.Predict([]float64{i})
// if err != nil {
// panic("EGATZ!! I FOUND AN ERROR! BETTER CHECK YOUR INPUT DIMENSIONS!")
// }
func (p *Perceptron) OnlineLearn(errors chan error, dataset chan base.Datapoint, onUpdate func([][]float64), normalize ...bool) {
if dataset == nil {
errors <- fmt.Errorf("ERROR: Attempting to learn with a nil data stream!\n")
close(errors)
return
}
if errors == nil {
errors = make(chan error)
}
fmt.Printf("Training:\n\tModel: Perceptron Classifier\n\tOptimization Method: Online Perceptron\n\tFeatures: %v\n\tLearning Rate α: %v\n...\n\n", len(p.Parameters), p.alpha)
norm := len(normalize) != 0 && normalize[0]
var point base.Datapoint
var more bool
for {
point, more = <-dataset
if more {
// have a datapoint, predict and update!
//
// Predict also checks if the point is of the
// correct dimensions
if norm {
base.NormalizePoint(point.X)
}
guess, err := p.Predict(point.X)
if err != nil {
// send the error channel some info and
// skip this datapoint
errors <- err
continue
}
if len(point.Y) != 1 {
errors <- fmt.Errorf("The binary perceptron model requires that the data results (y) have length 1 - given %v", len(point.Y))
continue
}
if len(point.X) != len(p.Parameters)-1 {
errors <- fmt.Errorf("The binary perceptron model requires that the length of input data (currently %v) be one less than the length of the parameter vector (%v)", len(point.X), len(p.Parameters))
continue
}
// update the parameters if the guess
// is wrong
if guess[0] != point.Y[0] {
p.Parameters[0] += p.alpha * (point.Y[0] - guess[0])
for i := 1; i < len(p.Parameters); i++ {
p.Parameters[i] += p.alpha * (point.Y[0] - guess[0]) * point.X[i-1]
}
// call the OnUpdate callback with the new theta
// appended to a blank slice so the vector is
// passed by value and not by reference
go onUpdate([][]float64{p.Parameters})
}
} else {
fmt.Printf("Training Completed.\n%v\n\n", p)
close(errors)
return
}
}
}
// OnlineLearn runs similar to using a fixed dataset with
// Stochastic Gradient Descent, but it handles data by
// passing it as a channal, and returns errors through
// a channel, which lets it run responsive to inputted data
// from outside the model itself (like using data from the
// stock market at timed intervals or using realtime data
// about the weather.)
//
// The onUpdate callback is called whenever the parameter
// vector theta is changed, so you are able to persist the
// model with the most up to date vector at all times (you
// could persist to a database within the callback, for
// example.) Don't worry about it taking too long and blocking,
// because the callback is spawned into another goroutine.
//
// NOTE that this function is suggested to run in it's own
// goroutine, or at least is designed as such.
//
// NOTE part 2: You can pass in an empty dataset, so long
// as it's not nil, and start pushing after.
//
// NOTE part 3: each example is only looked at as it goes
// through the channel, so if you want to have each example
// looked at more than once you must manually pass the data
// yourself.
//
// NOTE part 4: the optional parameter 'normalize' will
// , if true, normalize all data streamed through the
// channel to unit length. This will affect the outcome
// of the hypothesis, though it could be favorable if
// your data comes in drastically different scales.
//
// Example Online Logistic Regression:
//
// // create the channel of data and errors
// stream := make(chan base.Datapoint, 100)
// errors := make(chan error)
//
// // notice how we are adding another integer
// // to the end of the NewSoftmax call. This
// // tells the model to use that number of features
// // (2) in leu of finding that from the dataset
// // like you would with batch/stochastic GD
// //
// // Also – the 'base.StochasticGA' doesn't affect
// // anything. You could put batch or any other model.
// model := NewSoftmax(base.StochasticGA, 5e-5, 0, 3, 0, nil, nil, 2)
//
// go model.OnlineLearn(errors, stream, func(theta [][]float64) {
// // do something with the new theta (persist
// // to database?) in here.
// })
//
// go model.OnlineLearn(errors, stream, func(theta [][]float64) {})
//
// // start passing data to our datastream
// //
// // we could have data already in our channel
// // when we instantiated the Perceptron, though
// go func() {
// for iter := 0; iter < 3; iter++ {
// for i := -2.0; i < 2.0; i += 0.15 {
// for j := -2.0; j < 2.0; j += 0.15 {
//
// if -2*i+j/2-0.5 > 0 && -1*i-j < 0 {
// stream <- base.Datapoint{
// X: []float64{float64(i), float64(j)},
// Y: []float64{2.0},
// }
// } else if -2*i+j/2-0.5 > 0 && -1*i-j > 0 {
// stream <- base.Datapoint{
// X: []float64{float64(i), float64(j)},
// Y: []float64{1.0},
// }
// } else {
// stream <- base.Datapoint{
// X: []float64{float64(i), float64(j)},
// Y: []float64{0.0},
// }
// }
// }
// }
// }
//
// // close the dataset
// close(stream)
// }()
//
// // this will block until the error
// // channel is closed in the learning
// // function (it will, don't worry!)
// for {
// err, more := <-errors
// if err != nil {
// panic("THERE WAS AN ERROR!!! RUN!!!!")
// }
// if !more {
// break
// }
// }
//
// // Below here all the learning is completed
//
// // predict like usual
// guess, err = model.Predict([]float64{42,6,10,-32})
// if err != nil {
// panic("AAAARGGGH! SHIVER ME TIMBERS! THESE ROTTEN SCOUNDRELS FOUND AN ERROR!!!")
// }
func (s *Softmax) OnlineLearn(errors chan error, dataset chan base.Datapoint, onUpdate func([][]float64), normalize ...bool) {
if errors == nil {
errors = make(chan error)
}
if dataset == nil {
errors <- fmt.Errorf("ERROR: Attempting to learn with a nil data stream!\n")
close(errors)
return
}
fmt.Fprintf(s.Output, "Training:\n\tModel: Softmax Classifier (%v classes)\n\tOptimization Method: Online Stochastic Gradient Descent\n\tFeatures: %v\n\tLearning Rate α: %v\n...\n\n", s.k, len(s.Parameters), s.alpha)
norm := len(normalize) != 0 && normalize[0]
var point base.Datapoint
var more bool
for {
point, more = <-dataset
if more {
if len(point.Y) != 1 {
errors <- fmt.Errorf("ERROR: point.Y must have a length of 1. Point: %v", point)
continue
}
if norm {
base.NormalizePoint(point.X)
}
// go over each parameter vector for each
// classification value
for k, theta := range s.Parameters {
dj, err := func(point base.Datapoint, j int) ([]float64, error) {
grad := make([]float64, len(s.Parameters[0]))
// account for constant term
x := append([]float64{1}, point.X...)
var ident float64
if abs(point.Y[0]-float64(k)) < 1e-3 {
ident = 1
}
var numerator float64
var denom float64
for a := 0; a < s.k; a++ {
var inside float64
// calculate theta * x
for l, val := range s.Parameters[int(k)] {
inside += val * x[l]
}
if a == k {
numerator = math.Exp(inside)
}
denom += math.Exp(inside)
}
for a := range grad {
grad[a] += x[a] * (ident - numerator/denom)
}
// add in the regularization term
// λ*θ[j]
//
// notice that we don't count the
// constant term
for j := range grad {
grad[j] += s.regularization * s.Parameters[k][j]
}
return grad, nil
}(point, k)
if err != nil {
errors <- err
return
}
// now simultaneously update theta
for j := range theta {
newθ := theta[j] + s.alpha*dj[j]
if math.IsInf(newθ, 0) || math.IsNaN(newθ) {
errors <- fmt.Errorf("Sorry dude! Learning diverged. Some value of the parameter vector theta is ±Inf or NaN")
close(errors)
return
}
s.Parameters[k][j] = newθ
}
}
go onUpdate(s.Parameters)
} else {
fmt.Fprintf(s.Output, "Training Completed.\n%v\n\n", s)
close(errors)
return
}
}
}
// OnlineLearn runs similar to using a fixed dataset with
// Stochastic Gradient Descent, but it handles data by
// passing it as a channal, and returns errors through
// a channel, which lets it run responsive to inputted data
// from outside the model itself (like using data from the
// stock market at timed intervals or using realtime data
// about the weather.)
//
// The onUpdate callback is called whenever the parameter
// vector theta is changed, so you are able to persist the
// model with the most up to date vector at all times (you
// could persist to a database within the callback, for
// example.) Don't worry about it taking too long and blocking,
// because the callback is spawned into another goroutine.
//
// NOTE that this function is suggested to run in it's own
// goroutine, or at least is designed as such.
//
// NOTE part 2: You can pass in an empty dataset, so long
// as it's not nil, and start pushing after.
//
// NOTE part 3: each example is only looked at as it goes
// through the channel, so if you want to have each example
// looked at more than once you must manually pass the data
// yourself.
//
// NOTE part 4: the optional parameter 'normalize' will
// , if true, normalize all data streamed through the
// channel to unit length. This will affect the outcome
// of the hypothesis, though it could be favorable if
// your data comes in drastically different scales.
//
// Example Online Logistic Regression:
//
// // create the channel of data and errors
// stream := make(chan base.Datapoint, 100)
// errors := make(chan error)
//
// // notice how we are adding another integer
// // to the end of the NewLogistic call. This
// // tells the model to use that number of features
// // (4) in leu of finding that from the dataset
// // like you would with batch/stochastic GD
// //
// // Also – the 'base.StochasticGA' doesn't affect
// // anything. You could put batch.
// model := NewLogistic(base.StochasticGA, .0001, 0, 0, nil, nil, 4)
//
// go model.OnlineLearn(errors, stream, func(theta [][]float64) {
// // do something with the new theta (persist
// // to database?) in here.
// })
//
// go func() {
// for iterations := 0; iterations < 20; iterations++ {
// for i := -200.0; abs(i) > 1; i *= -0.75 {
// for j := -200.0; abs(j) > 1; j *= -0.75 {
// for k := -200.0; abs(k) > 1; k *= -0.75 {
// for l := -200.0; abs(l) > 1; l *= -0.75 {
// if i/2+2*k-4*j+2*l+3 > 0 {
// stream <- base.Datapoint{
// X: []float64{i, j, k, l},
// Y: []float64{1.0},
// }
// } else {
// stream <- base.Datapoint{
// X: []float64{i, j, k, l},
// Y: []float64{0.0},
// }
// }
// }
// }
// }
// }
// }
//
// // close the dataset to tell the model
// // to stop learning when it finishes reading
// // what's left in the channel
// close(stream)
// }()
//
// // this will block until the error
// // channel is closed in the learning
// // function (it will, don't worry!)
// for {
// err, more := <-errors
// if err != nil {
// panic("THERE WAS AN ERROR!!! RUN!!!!")
// }
// if !more {
// break
// }
// }
//
// // Below here all the learning is completed
//
// // predict like usual
// guess, err = model.Predict([]float64{42,6,10,-32})
// if err != nil {
// panic("AAAARGGGH! SHIVER ME TIMBERS! THESE ROTTEN SCOUNDRELS FOUND AN ERROR!!!")
// }
func (l *Logistic) OnlineLearn(errors chan error, dataset chan base.Datapoint, onUpdate func([][]float64), normalize ...bool) {
if errors == nil {
errors = make(chan error)
}
if dataset == nil {
errors <- fmt.Errorf("ERROR: Attempting to learn with a nil data stream!\n")
close(errors)
return
}
fmt.Fprintf(l.Output, "Training:\n\tModel: Logistic (Binary) Classifier\n\tOptimization Method: Online Stochastic Gradient Descent\n\tFeatures: %v\n\tLearning Rate α: %v\n...\n\n", len(l.Parameters), l.alpha)
norm := len(normalize) != 0 && normalize[0]
var point base.Datapoint
var more bool
for {
point, more = <-dataset
if more {
if len(point.Y) != 1 {
errors <- fmt.Errorf("ERROR: point.Y must have a length of 1. Point: %v", point)
}
if norm {
base.NormalizePoint(point.X)
}
newTheta := make([]float64, len(l.Parameters))
for j := range l.Parameters {
// find the gradient using the point
// from the channel (different than
// calling from the dataset so we need
// to have a new function instead of calling
// Dij(i, j))
dj, err := func(point base.Datapoint, j int) (float64, error) {
prediction, err := l.Predict(point.X)
if err != nil {
return 0, err
}
// account for constant term
// x is x[i][j] via Andrew Ng's terminology
var x float64
if j == 0 {
x = 1
} else {
x = point.X[j-1]
}
var gradient float64
gradient = (point.Y[0] - prediction[0]) * x
// add in the regularization term
// λ*θ[j]
//
// notice that we don't count the
// constant term
if j != 0 {
gradient += l.regularization * l.Parameters[j]
}
return gradient, nil
}(point, j)
if err != nil {
errors <- err
continue
}
newTheta[j] = l.Parameters[j] + l.alpha*dj
}
// now simultaneously update Theta
for j := range l.Parameters {
newθ := newTheta[j]
if math.IsInf(newθ, 0) || math.IsNaN(newθ) {
errors <- fmt.Errorf("Sorry! Learning diverged. Some value of the parameter vector theta is ±Inf or NaN")
continue
}
l.Parameters[j] = newθ
}
go onUpdate([][]float64{l.Parameters})
} else {
fmt.Fprintf(l.Output, "Training Completed.\n%v\n\n", l)
close(errors)
return
}
}
}
func TestLinearKernelTwoDXNormalizedShouldPass1(t *testing.T) {
// create the channel of data and errors
stream := make(chan base.Datapoint, 100)
errors := make(chan error)
model := NewKernelPerceptron(base.LinearKernel())
go model.OnlineLearn(errors, stream, func(supportVector [][]float64) {}, true)
for i := -200.0; abs(i) > 1; i *= -0.57 {
for j := -200.0; abs(j) > 1; j *= -0.57 {
x := []float64{i, j}
base.NormalizePoint(x)
if 5*x[0]+10*x[1]-4 > 0 {
stream <- base.Datapoint{
X: x,
Y: []float64{1.0},
}
} else {
stream <- base.Datapoint{
X: x,
Y: []float64{-1.0},
}
}
}
}
// close the dataset
close(stream)
for {
err, more := <-errors
assert.False(t, more, "There should not be any errors!")
if more {
assert.Nil(t, err, "Learning error should be nil")
} else {
break
}
}
var count int
var incorrect int
for i := -200.0; abs(i) > 1; i *= -0.53 {
for j := -200.0; abs(j) > 1; j *= -0.53 {
x := []float64{i, j}
base.NormalizePoint(x)
guess, err := model.Predict([]float64{i, j}, true)
assert.Nil(t, err, "Prediction error should be nil")
assert.Len(t, guess, 1, "Guess should have length 1")
if 5*x[0]+10*x[1]-4 > 0 && guess[0] != 1.0 {
incorrect++
} else if 5*x[0]+10*x[1]-4 <= 0 && guess[0] != -1.0 {
incorrect++
}
count++
}
}
fmt.Printf("Predictions: %v\n\tIncorrect: %v\n\tAccuracy Rate: %v percent\n", count, incorrect, 100*(1.0-float64(incorrect)/float64(count)))
assert.True(t, float64(incorrect)/float64(count) < 0.14, "Accuracy should be greater than 86%")
}
// Predict takes in a variable x (an array of floats,) and
// finds the value of the hypothesis function given the
// current parameter vector θ
//
// if normalize is given as true, then the input will
// first be normalized to unit length. Only use this if
// you trained off of normalized inputs and are feeding
// an un-normalized input
func (l *LocalLinear) Predict(x []float64, normalize ...bool) ([]float64, error) {
if len(x)+1 != len(l.Parameters) {
err := fmt.Errorf("ERROR: Parameter vector should be 1 longer than input vector!\n\tLength of x given: %v\n\tLength of parameters: %v\n", len(x), len(l.Parameters))
print(err.Error())
return nil, err
}
norm := len(normalize) != 0 && normalize[0]
if norm {
base.NormalizePoint(x)
}
if l.trainingSet == nil || l.expectedResults == nil {
err := fmt.Errorf("ERROR: Attempting to learn with no training examples!\n")
print(err.Error())
return nil, err
}
examples := len(l.trainingSet)
if examples == 0 || len(l.trainingSet[0]) == 0 {
err := fmt.Errorf("ERROR: Attempting to learn with no training examples!\n")
print(err.Error())
return nil, err
}
if len(l.expectedResults) == 0 {
err := fmt.Errorf("ERROR: Attempting to learn with no expected results! This isn't an unsupervised model!! You'll need to include data before you learn :)\n")
print(err.Error())
return nil, err
}
fmt.Printf("Training:\n\tModel: Locally Weighted Linear Regression\n\tOptimization Method: %v\n\tCenter Point: %v\n\tTraining Examples: %v\n\tFeatures: %v\n\tLearning Rate α: %v\n\tRegularization Parameter λ: %v\n...\n\n", l.method, x, examples, len(l.trainingSet[0]), l.alpha, l.regularization)
var iter int
features := len(l.Parameters)
if l.method == base.BatchGA {
for ; iter < l.maxIterations; iter++ {
newTheta := make([]float64, features)
for j := range l.Parameters {
dj, err := l.Dj(x, j)
if err != nil {
return nil, err
}
newTheta[j] = l.Parameters[j] + l.alpha*dj
}
// now simultaneously update Theta
for j := range l.Parameters {
newθ := newTheta[j]
if math.IsInf(newθ, 0) || math.IsNaN(newθ) {
return nil, fmt.Errorf("Sorry! Learning diverged. Some value of the parameter vector theta is ±Inf or NaN")
}
l.Parameters[j] = newθ
}
}
} else if l.method == base.StochasticGA {
for ; iter < l.maxIterations; iter++ {
newTheta := make([]float64, features)
for i := 0; i < examples; i++ {
for j := range l.Parameters {
dj, err := l.Dij(x, i, j)
if err != nil {
return nil, err
}
newTheta[j] = l.Parameters[j] + l.alpha*dj
}
// now simultaneously update Theta
for j := range l.Parameters {
newθ := newTheta[j]
if math.IsInf(newθ, 0) || math.IsNaN(newθ) {
return nil, fmt.Errorf("Sorry! Learning diverged. Some value of the parameter vector theta is ±Inf or NaN")
}
l.Parameters[j] = newθ
}
}
}
} else {
return nil, fmt.Errorf("Chose a training method not implemented for LocalLinear regression")
}
fmt.Printf("Training Completed. Went through %v iterations.\n%v\n\n", iter, l)
// include constant term in sum
sum := l.Parameters[0]
for i := range x {
sum += x[i] * l.Parameters[i+1]
}
return []float64{sum}, nil
}
func TestOnlineTwoDXNormalizedShouldPass1(t *testing.T) {
// create the channel of data and errors
stream := make(chan base.Datapoint, 10000)
errors := make(chan error, 20)
var updates int
model := NewLogistic(base.StochasticGA, .0001, 0, 0, nil, nil, 2)
go model.OnlineLearn(errors, stream, func(theta [][]float64) {
updates++
}, true)
var iter int
for i := -200.0; abs(i) > 1; i *= -0.82 {
for j := -200.0; abs(j) > 1; j *= -0.82 {
x := []float64{i, j}
base.NormalizePoint(x)
if x[0]/2+2*x[1]-4 > 0 {
stream <- base.Datapoint{
X: []float64{i, j},
Y: []float64{1.0},
}
} else {
stream <- base.Datapoint{
X: []float64{i, j},
Y: []float64{-1.0},
}
}
iter++
}
}
// close the dataset
close(stream)
err, more := <-errors
assert.Nil(t, err, "Learning error should be nil")
assert.False(t, more, "There should be no errors returned")
assert.True(t, updates > 100, "There should be more than 100 updates of theta")
for i := -200.0; i < 200; i += 100 {
for j := -200.0; j < 200; j += 100 {
x := []float64{i, j}
base.NormalizePoint(x)
guess, err := model.Predict([]float64{i, j}, true)
assert.Nil(t, err, "Prediction error should be nil")
assert.Len(t, guess, 1, "Guess should have length 1")
if x[0]/2+2*x[1]-4 > 0 {
assert.True(t, 1.0 > guess[0] && guess[0] > 0.5, "Guess should be 1 for %v, %v", i, j)
} else {
assert.True(t, 0.0 < guess[0] && guess[0] < 0.5, "Guess should be 0 for %v, %v", i, j)
}
}
}
}