// Send implements the batch.Sender interface. If the request is part of a
// transaction, the TxnCoordSender adds the transaction to a map of active
// transactions and begins heartbeating it. Every subsequent request for the
// same transaction updates the lastUpdate timestamp to prevent live
// transactions from being considered abandoned and garbage collected.
// Read/write mutating requests have their key or key range added to the
// transaction's interval tree of key ranges for eventual cleanup via resolved
// write intents; they're tagged to an outgoing EndTransaction request, with
// the receiving replica in charge of resolving them.
func (tc *TxnCoordSender) Send(
ctx context.Context, ba roachpb.BatchRequest,
) (*roachpb.BatchResponse, *roachpb.Error) {
// Start new or pick up active trace. From here on, there's always an active
// Trace, though its overhead is small unless it's sampled.
sp := opentracing.SpanFromContext(ctx)
var tracer opentracing.Tracer
if sp == nil {
tracer = tc.AmbientContext.Tracer
sp = tracer.StartSpan(opTxnCoordSender)
defer sp.Finish()
ctx = opentracing.ContextWithSpan(ctx, sp)
} else {
tracer = sp.Tracer()
}
startNS := tc.clock.PhysicalNow()
if ba.Txn != nil {
// If this request is part of a transaction...
if err := tc.maybeBeginTxn(&ba); err != nil {
return nil, roachpb.NewError(err)
}
txnID := *ba.Txn.ID
// Associate the txnID with the trace. We need to do this after the
// maybeBeginTxn call. We set both a baggage item and a tag because only
// tags show up in the LIghtstep UI.
txnIDStr := txnID.String()
sp.SetTag("txnID", txnIDStr)
sp.SetBaggageItem("txnID", txnIDStr)
var et *roachpb.EndTransactionRequest
var hasET bool
{
var rArgs roachpb.Request
rArgs, hasET = ba.GetArg(roachpb.EndTransaction)
if hasET {
et = rArgs.(*roachpb.EndTransactionRequest)
if len(et.Key) != 0 {
return nil, roachpb.NewErrorf("EndTransaction must not have a Key set")
}
et.Key = ba.Txn.Key
if len(et.IntentSpans) > 0 {
// TODO(tschottdorf): it may be useful to allow this later.
// That would be part of a possible plan to allow txns which
// write on multiple coordinators.
return nil, roachpb.NewErrorf("client must not pass intents to EndTransaction")
}
}
}
if pErr := func() *roachpb.Error {
tc.Lock()
defer tc.Unlock()
if pErr := tc.maybeRejectClientLocked(ctx, *ba.Txn); pErr != nil {
return pErr
}
if !hasET {
return nil
}
// Everything below is carried out only when trying to commit.
// Populate et.IntentSpans, taking into account both any existing
// and new writes, and taking care to perform proper deduplication.
txnMeta := tc.txns[txnID]
distinctSpans := true
if txnMeta != nil {
et.IntentSpans = txnMeta.keys
// Defensively set distinctSpans to false if we had any previous
// requests in this transaction. This effectively limits the distinct
// spans optimization to 1pc transactions.
distinctSpans = len(txnMeta.keys) == 0
}
// We can't pass in a batch response here to better limit the key
// spans as we don't know what is going to be affected. This will
// affect queries such as `DELETE FROM my.table LIMIT 10` when
// executed as a 1PC transaction. e.g.: a (BeginTransaction,
// DeleteRange, EndTransaction) batch.
ba.IntentSpanIterate(nil, func(key, endKey roachpb.Key) {
et.IntentSpans = append(et.IntentSpans, roachpb.Span{
Key: key,
EndKey: endKey,
})
})
// TODO(peter): Populate DistinctSpans on all batches, not just batches
// which contain an EndTransactionRequest.
var distinct bool
// The request might already be used by an outgoing goroutine, so
// we can't safely mutate anything in-place (as MergeSpans does).
et.IntentSpans = append([]roachpb.Span(nil), et.IntentSpans...)
et.IntentSpans, distinct = roachpb.MergeSpans(et.IntentSpans)
ba.Header.DistinctSpans = distinct && distinctSpans
if len(et.IntentSpans) == 0 {
// If there aren't any intents, then there's factually no
// transaction to end. Read-only txns have all of their state
// in the client.
return roachpb.NewErrorf("cannot commit a read-only transaction")
}
if txnMeta != nil {
txnMeta.keys = et.IntentSpans
}
return nil
}(); pErr != nil {
return nil, pErr
}
if hasET && log.V(1) {
for _, intent := range et.IntentSpans {
log.Eventf(ctx, "intent: [%s,%s)", intent.Key, intent.EndKey)
}
}
}
// Embed the trace metadata into the header for use by RPC recipients. We need
// to do this after the maybeBeginTxn call above.
// TODO(tschottdorf): To get rid of the spurious alloc below we need to
// implement the carrier interface on ba.Header or make Span non-nullable,
// both of which force all of ba on the Heap. It's already there, so may
// not be a big deal, but ba should live on the stack. Also not easy to use
// a buffer pool here since anything that goes into the RPC layer could be
// used by goroutines we didn't wait for.
if ba.TraceContext == nil {
ba.TraceContext = &tracing.SpanContextCarrier{}
} else {
// We didn't make this object but are about to mutate it, so we
// have to take a copy - the original might already have been
// passed to the RPC layer.
ba.TraceContext = protoutil.Clone(ba.TraceContext).(*tracing.SpanContextCarrier)
}
if err := tracer.Inject(sp.Context(), basictracer.Delegator, ba.TraceContext); err != nil {
return nil, roachpb.NewError(err)
}
// Send the command through wrapped sender, taking appropriate measures
// on error.
var br *roachpb.BatchResponse
{
var pErr *roachpb.Error
br, pErr = tc.wrapped.Send(ctx, ba)
if _, ok := pErr.GetDetail().(*roachpb.OpRequiresTxnError); ok {
// TODO(tschottdorf): needs to keep the trace.
br, pErr = tc.resendWithTxn(ba)
}
if pErr = tc.updateState(ctx, startNS, ba, br, pErr); pErr != nil {
log.Eventf(ctx, "error: %s", pErr)
return nil, pErr
}
}
if br.Txn == nil {
return br, nil
}
if _, ok := ba.GetArg(roachpb.EndTransaction); !ok {
return br, nil
}
// If the --linearizable flag is set, we want to make sure that
// all the clocks in the system are past the commit timestamp
// of the transaction. This is guaranteed if either
// - the commit timestamp is MaxOffset behind startNS
// - MaxOffset ns were spent in this function
// when returning to the client. Below we choose the option
// that involves less waiting, which is likely the first one
// unless a transaction commits with an odd timestamp.
if tsNS := br.Txn.Timestamp.WallTime; startNS > tsNS {
startNS = tsNS
}
sleepNS := tc.clock.MaxOffset() -
time.Duration(tc.clock.PhysicalNow()-startNS)
if tc.linearizable && sleepNS > 0 {
defer func() {
if log.V(1) {
log.Infof(ctx, "%v: waiting %s on EndTransaction for linearizability", br.Txn.Short(), util.TruncateDuration(sleepNS, time.Millisecond))
}
time.Sleep(sleepNS)
}()
}
if br.Txn.Status != roachpb.PENDING {
tc.Lock()
tc.cleanupTxnLocked(ctx, *br.Txn)
tc.Unlock()
}
return br, nil
}