Ejemplo n.º 1
0
// handleGetData is invoked when a peer receives a getdata bitcoin message and
// is used to deliver block and transaction information.
func (p *peer) handleGetDataMsg(msg *btcwire.MsgGetData) {
	notFound := btcwire.NewMsgNotFound()

	// We wait on the this wait channel periodically to prevent queueing
	// far more data than we can send in a reasonable time, wasting memory.
	// The waiting occurs after the database fetch for the next one to
	// provide a little pipelining.
	var waitChan chan bool
	doneChan := make(chan bool)
out:
	for i, iv := range msg.InvList {
		var c chan bool
		// If this will be the last message we send.
		if i == len(msg.InvList)-1 && len(notFound.InvList) == 0 {
			c = doneChan
		} else if i > 0 && i+1%3 == 0 {
			// buffered so as to not make the send goroutine block.
			c = make(chan bool, 1)
		}
		var err error
		switch iv.Type {
		case btcwire.InvTypeTx:
			err = p.pushTxMsg(&iv.Hash, c, waitChan)
		case btcwire.InvTypeBlock:
			err = p.pushBlockMsg(&iv.Hash, c, waitChan)
		default:
			peerLog.Warnf("Unknown type in inventory request %d",
				iv.Type)
			break out
		}
		if err != nil {
			notFound.AddInvVect(iv)
		}
		waitChan = c
	}
	if len(notFound.InvList) != 0 {
		p.QueueMessage(notFound, doneChan)
	}

	// Wait for messages to be sent. We can send quite a lot of data at this
	// point and this will keep the peer busy for a decent amount of time.
	// We don't process anything else by them in this time so that we
	// have an idea of when we should hear back from them - else the idle
	// timeout could fire when we were only half done sending the blocks.
	<-doneChan
}
Ejemplo n.º 2
0
// TestNotFound tests the MsgNotFound API.
func TestNotFound(t *testing.T) {
	pver := btcwire.ProtocolVersion

	// Ensure the command is expected value.
	wantCmd := "notfound"
	msg := btcwire.NewMsgNotFound()
	if cmd := msg.Command(); cmd != wantCmd {
		t.Errorf("NewMsgNotFound: wrong command - got %v want %v",
			cmd, wantCmd)
	}

	// Ensure max payload is expected value for latest protocol version.
	// Num inventory vectors (varInt) + max allowed inventory vectors.
	wantPayload := uint32(1800009)
	maxPayload := msg.MaxPayloadLength(pver)
	if maxPayload != wantPayload {
		t.Errorf("MaxPayloadLength: wrong max payload length for "+
			"protocol version %d - got %v, want %v", pver,
			maxPayload, wantPayload)
	}

	// Ensure inventory vectors are added properly.
	hash := btcwire.ShaHash{}
	iv := btcwire.NewInvVect(btcwire.InvVect_Block, &hash)
	err := msg.AddInvVect(iv)
	if err != nil {
		t.Errorf("AddInvVect: %v", err)
	}
	if msg.InvList[0] != iv {
		t.Errorf("AddInvVect: wrong invvect added - got %v, want %v",
			spew.Sprint(msg.InvList[0]), spew.Sprint(iv))
	}

	// Ensure adding more than the max allowed inventory vectors per
	// message returns an error.
	for i := 0; i < btcwire.MaxInvPerMsg; i++ {
		err = msg.AddInvVect(iv)
	}
	if err == nil {
		t.Errorf("AddInvVect: expected error on too many inventory " +
			"vectors not received")
	}

	return
}
Ejemplo n.º 3
0
// handleGetData is invoked when a peer receives a getdata bitcoin message and
// is used to deliver block and transaction information.
func (p *peer) handleGetDataMsg(msg *btcwire.MsgGetData) {
	notFound := btcwire.NewMsgNotFound()

	doneChan := make(chan bool)
out:
	for i, iv := range msg.InvList {
		var c chan bool
		// If this will be the last message we send.
		if i == len(msg.InvList)-1 && len(notFound.InvList) == 0 {
			c = doneChan
		}
		var err error
		switch iv.Type {
		case btcwire.InvTypeTx:
			err = p.pushTxMsg(&iv.Hash, c)
		case btcwire.InvTypeBlock:
			err = p.pushBlockMsg(&iv.Hash, c)
		default:
			log.Warnf("PEER: Unknown type in inventory request %d",
				iv.Type)
			break out
		}
		if err != nil {
			notFound.AddInvVect(iv)
		}
	}
	if len(notFound.InvList) != 0 {
		p.QueueMessage(notFound, doneChan)
	}

	// Wait for messages to be sent. We can send quite a lot of data at this
	// point and this will keep the peer busy for a decent amount of time.
	// We don't process anything else by them in this time so that we
	// have an idea of when we should hear back from them - else the idle
	// timeout could fire when we were only half done sending the blocks.
	<-doneChan
}
Ejemplo n.º 4
0
Archivo: peer.go Proyecto: kazcw/btcd
// handleGetData is invoked when a peer receives a getdata bitcoin message and
// is used to deliver block and transaction information.
func (p *peer) handleGetDataMsg(msg *btcwire.MsgGetData) {
	notFound := btcwire.NewMsgNotFound()

out:
	for _, iv := range msg.InvList {
		var err error
		switch iv.Type {
		case btcwire.InvVect_Tx:
			err = p.pushTxMsg(iv.Hash)
		case btcwire.InvVect_Block:
			err = p.pushBlockMsg(iv.Hash)
		default:
			log.Warnf("[PEER] Unknown type in inventory request %d",
				iv.Type)
			break out
		}
		if err != nil {
			notFound.AddInvVect(iv)
		}
	}
	if len(notFound.InvList) != 0 {
		p.QueueMessage(notFound)
	}
}
Ejemplo n.º 5
0
// TestNotFoundWire tests the MsgNotFound wire encode and decode for various
// numbers of inventory vectors and protocol versions.
func TestNotFoundWire(t *testing.T) {
	// Block 203707 hash.
	hashStr := "3264bc2ac36a60840790ba1d475d01367e7c723da941069e9dc"
	blockHash, err := btcwire.NewShaHashFromStr(hashStr)
	if err != nil {
		t.Errorf("NewShaHashFromStr: %v", err)
	}

	// Transation 1 of Block 203707 hash.
	hashStr = "d28a3dc7392bf00a9855ee93dd9a81eff82a2c4fe57fbd42cfe71b487accfaf0"
	txHash, err := btcwire.NewShaHashFromStr(hashStr)
	if err != nil {
		t.Errorf("NewShaHashFromStr: %v", err)
	}

	iv := btcwire.NewInvVect(btcwire.InvVect_Block, blockHash)
	iv2 := btcwire.NewInvVect(btcwire.InvVect_Tx, txHash)

	// Empty notfound message.
	NoInv := btcwire.NewMsgNotFound()
	NoInvEncoded := []byte{
		0x00, // Varint for number of inventory vectors
	}

	// NotFound message with multiple inventory vectors.
	MultiInv := btcwire.NewMsgNotFound()
	MultiInv.AddInvVect(iv)
	MultiInv.AddInvVect(iv2)
	MultiInvEncoded := []byte{
		0x02,                   // Varint for number of inv vectors
		0x02, 0x00, 0x00, 0x00, // InvVect_Block
		0xdc, 0xe9, 0x69, 0x10, 0x94, 0xda, 0x23, 0xc7,
		0xe7, 0x67, 0x13, 0xd0, 0x75, 0xd4, 0xa1, 0x0b,
		0x79, 0x40, 0x08, 0xa6, 0x36, 0xac, 0xc2, 0x4b,
		0x26, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Block 203707 hash
		0x01, 0x00, 0x00, 0x00, // InvVect_Tx
		0xf0, 0xfa, 0xcc, 0x7a, 0x48, 0x1b, 0xe7, 0xcf,
		0x42, 0xbd, 0x7f, 0xe5, 0x4f, 0x2c, 0x2a, 0xf8,
		0xef, 0x81, 0x9a, 0xdd, 0x93, 0xee, 0x55, 0x98,
		0x0a, 0xf0, 0x2b, 0x39, 0xc7, 0x3d, 0x8a, 0xd2, // Tx 1 of block 203707 hash
	}

	tests := []struct {
		in   *btcwire.MsgNotFound // Message to encode
		out  *btcwire.MsgNotFound // Expected decoded message
		buf  []byte               // Wire encoding
		pver uint32               // Protocol version for wire encoding
	}{
		// Latest protocol version with no inv vectors.
		{
			NoInv,
			NoInv,
			NoInvEncoded,
			btcwire.ProtocolVersion,
		},

		// Latest protocol version with multiple inv vectors.
		{
			MultiInv,
			MultiInv,
			MultiInvEncoded,
			btcwire.ProtocolVersion,
		},

		// Protocol version BIP0035Version no inv vectors.
		{
			NoInv,
			NoInv,
			NoInvEncoded,
			btcwire.BIP0035Version,
		},

		// Protocol version BIP0035Version with multiple inv vectors.
		{
			MultiInv,
			MultiInv,
			MultiInvEncoded,
			btcwire.BIP0035Version,
		},

		// Protocol version BIP0031Version no inv vectors.
		{
			NoInv,
			NoInv,
			NoInvEncoded,
			btcwire.BIP0031Version,
		},

		// Protocol version BIP0031Version with multiple inv vectors.
		{
			MultiInv,
			MultiInv,
			MultiInvEncoded,
			btcwire.BIP0031Version,
		},

		// Protocol version NetAddressTimeVersion no inv vectors.
		{
			NoInv,
			NoInv,
			NoInvEncoded,
			btcwire.NetAddressTimeVersion,
		},

		// Protocol version NetAddressTimeVersion with multiple inv vectors.
		{
			MultiInv,
			MultiInv,
			MultiInvEncoded,
			btcwire.NetAddressTimeVersion,
		},

		// Protocol version MultipleAddressVersion no inv vectors.
		{
			NoInv,
			NoInv,
			NoInvEncoded,
			btcwire.MultipleAddressVersion,
		},

		// Protocol version MultipleAddressVersion with multiple inv vectors.
		{
			MultiInv,
			MultiInv,
			MultiInvEncoded,
			btcwire.MultipleAddressVersion,
		},
	}

	t.Logf("Running %d tests", len(tests))
	for i, test := range tests {
		// Encode the message to wire format.
		var buf bytes.Buffer
		err := test.in.BtcEncode(&buf, test.pver)
		if err != nil {
			t.Errorf("BtcEncode #%d error %v", i, err)
			continue
		}
		if !bytes.Equal(buf.Bytes(), test.buf) {
			t.Errorf("BtcEncode #%d\n got: %s want: %s", i,
				spew.Sdump(buf.Bytes()), spew.Sdump(test.buf))
			continue
		}

		// Decode the message from wire format.
		var msg btcwire.MsgNotFound
		rbuf := bytes.NewBuffer(test.buf)
		err = msg.BtcDecode(rbuf, test.pver)
		if err != nil {
			t.Errorf("BtcDecode #%d error %v", i, err)
			continue
		}
		if !reflect.DeepEqual(&msg, test.out) {
			t.Errorf("BtcDecode #%d\n got: %s want: %s", i,
				spew.Sdump(msg), spew.Sdump(test.out))
			continue
		}
	}
}
Ejemplo n.º 6
0
// TestNotFoundWireErrors performs negative tests against wire encode and decode
// of MsgNotFound to confirm error paths work correctly.
func TestNotFoundWireErrors(t *testing.T) {
	pver := btcwire.ProtocolVersion
	btcwireErr := &btcwire.MessageError{}

	// Block 203707 hash.
	hashStr := "3264bc2ac36a60840790ba1d475d01367e7c723da941069e9dc"
	blockHash, err := btcwire.NewShaHashFromStr(hashStr)
	if err != nil {
		t.Errorf("NewShaHashFromStr: %v", err)
	}

	iv := btcwire.NewInvVect(btcwire.InvVect_Block, blockHash)

	// Base message used to induce errors.
	baseNotFound := btcwire.NewMsgNotFound()
	baseNotFound.AddInvVect(iv)
	baseNotFoundEncoded := []byte{
		0x02,                   // Varint for number of inv vectors
		0x02, 0x00, 0x00, 0x00, // InvVect_Block
		0xdc, 0xe9, 0x69, 0x10, 0x94, 0xda, 0x23, 0xc7,
		0xe7, 0x67, 0x13, 0xd0, 0x75, 0xd4, 0xa1, 0x0b,
		0x79, 0x40, 0x08, 0xa6, 0x36, 0xac, 0xc2, 0x4b,
		0x26, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Block 203707 hash
	}

	// Message that forces an error by having more than the max allowed inv
	// vectors.
	maxNotFound := btcwire.NewMsgNotFound()
	for i := 0; i < btcwire.MaxInvPerMsg; i++ {
		maxNotFound.AddInvVect(iv)
	}
	maxNotFound.InvList = append(maxNotFound.InvList, iv)
	maxNotFoundEncoded := []byte{
		0xfd, 0x51, 0xc3, // Varint for number of inv vectors (50001)
	}

	tests := []struct {
		in       *btcwire.MsgNotFound // Value to encode
		buf      []byte               // Wire encoding
		pver     uint32               // Protocol version for wire encoding
		max      int                  // Max size of fixed buffer to induce errors
		writeErr error                // Expected write error
		readErr  error                // Expected read error
	}{
		// Latest protocol version with intentional read/write errors.
		// Force error in inventory vector count
		{baseNotFound, baseNotFoundEncoded, pver, 0, io.ErrShortWrite, io.EOF},
		// Force error in inventory list.
		{baseNotFound, baseNotFoundEncoded, pver, 1, io.ErrShortWrite, io.EOF},
		// Force error with greater than max inventory vectors.
		{maxNotFound, maxNotFoundEncoded, pver, 3, btcwireErr, btcwireErr},
	}

	t.Logf("Running %d tests", len(tests))
	for i, test := range tests {
		// Encode to wire format.
		w := newFixedWriter(test.max)
		err := test.in.BtcEncode(w, test.pver)
		if reflect.TypeOf(err) != reflect.TypeOf(test.writeErr) {
			t.Errorf("BtcEncode #%d wrong error got: %v, want: %v",
				i, err, test.writeErr)
			continue
		}

		// For errors which are not of type btcwire.MessageError, check
		// them for equality.
		if _, ok := err.(*btcwire.MessageError); !ok {
			if err != test.writeErr {
				t.Errorf("BtcEncode #%d wrong error got: %v, "+
					"want: %v", i, err, test.writeErr)
				continue
			}
		}

		// Decode from wire format.
		var msg btcwire.MsgNotFound
		r := newFixedReader(test.max, test.buf)
		err = msg.BtcDecode(r, test.pver)
		if reflect.TypeOf(err) != reflect.TypeOf(test.readErr) {
			t.Errorf("BtcDecode #%d wrong error got: %v, want: %v",
				i, err, test.readErr)
			continue
		}

		// For errors which are not of type btcwire.MessageError, check
		// them for equality.
		if _, ok := err.(*btcwire.MessageError); !ok {
			if err != test.readErr {
				t.Errorf("BtcDecode #%d wrong error got: %v, "+
					"want: %v", i, err, test.readErr)
				continue
			}
		}
	}
}
Ejemplo n.º 7
0
// TestMessage tests the Read/WriteMessage API.
func TestMessage(t *testing.T) {
	pver := btcwire.ProtocolVersion

	// Create the various types of messages to test.

	// MsgVersion.
	addrYou := &net.TCPAddr{IP: net.ParseIP("192.168.0.1"), Port: 8333}
	you, err := btcwire.NewNetAddress(addrYou, btcwire.SFNodeNetwork)
	if err != nil {
		t.Errorf("NewNetAddress: %v", err)
	}
	you.Timestamp = time.Time{} // Version message has zero value timestamp.
	addrMe := &net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: 8333}
	me, err := btcwire.NewNetAddress(addrMe, btcwire.SFNodeNetwork)
	if err != nil {
		t.Errorf("NewNetAddress: %v", err)
	}
	me.Timestamp = time.Time{} // Version message has zero value timestamp.
	msgVersion := btcwire.NewMsgVersion(me, you, 123123, "/test:0.0.1/", 0)

	msgVerack := btcwire.NewMsgVerAck()
	msgGetAddr := btcwire.NewMsgGetAddr()
	msgAddr := btcwire.NewMsgAddr()
	msgGetBlocks := btcwire.NewMsgGetBlocks(&btcwire.ShaHash{})
	msgBlock := &blockOne
	msgInv := btcwire.NewMsgInv()
	msgGetData := btcwire.NewMsgGetData()
	msgNotFound := btcwire.NewMsgNotFound()
	msgTx := btcwire.NewMsgTx()
	msgPing := btcwire.NewMsgPing(123123)
	msgPong := btcwire.NewMsgPong(123123)
	msgGetHeaders := btcwire.NewMsgGetHeaders()
	msgHeaders := btcwire.NewMsgHeaders()
	msgAlert := btcwire.NewMsgAlert("payload", "signature")
	msgMemPool := btcwire.NewMsgMemPool()

	tests := []struct {
		in     btcwire.Message    // Value to encode
		out    btcwire.Message    // Expected decoded value
		pver   uint32             // Protocol version for wire encoding
		btcnet btcwire.BitcoinNet // Network to use for wire encoding
	}{
		{msgVersion, msgVersion, pver, btcwire.MainNet},
		{msgVerack, msgVerack, pver, btcwire.MainNet},
		{msgGetAddr, msgGetAddr, pver, btcwire.MainNet},
		{msgAddr, msgAddr, pver, btcwire.MainNet},
		{msgGetBlocks, msgGetBlocks, pver, btcwire.MainNet},
		{msgBlock, msgBlock, pver, btcwire.MainNet},
		{msgInv, msgInv, pver, btcwire.MainNet},
		{msgGetData, msgGetData, pver, btcwire.MainNet},
		{msgNotFound, msgNotFound, pver, btcwire.MainNet},
		{msgTx, msgTx, pver, btcwire.MainNet},
		{msgPing, msgPing, pver, btcwire.MainNet},
		{msgPong, msgPong, pver, btcwire.MainNet},
		{msgGetHeaders, msgGetHeaders, pver, btcwire.MainNet},
		{msgHeaders, msgHeaders, pver, btcwire.MainNet},
		{msgAlert, msgAlert, pver, btcwire.MainNet},
		{msgMemPool, msgMemPool, pver, btcwire.MainNet},
	}

	t.Logf("Running %d tests", len(tests))
	for i, test := range tests {
		// Encode to wire format.
		var buf bytes.Buffer
		err := btcwire.WriteMessage(&buf, test.in, test.pver, test.btcnet)
		if err != nil {
			t.Errorf("WriteMessage #%d error %v", i, err)
			continue
		}

		// Decode from wire format.
		rbuf := bytes.NewBuffer(buf.Bytes())
		msg, _, err := btcwire.ReadMessage(rbuf, test.pver, test.btcnet)
		if err != nil {
			t.Errorf("ReadMessage #%d error %v, msg %v", i, err,
				spew.Sdump(msg))
			continue
		}
		if !reflect.DeepEqual(msg, test.out) {
			t.Errorf("ReadMessage #%d\n got: %v want: %v", i,
				spew.Sdump(msg), spew.Sdump(test.out))
			continue
		}
	}
}