// Parse and validate flags.
func init() {
// Unset localhost defaults if certificate file can not be found.
certFileExists, err := cfgutil.FileExists(opts.RPCCertificateFile)
if err != nil {
fatalf("%v", err)
}
if !certFileExists {
opts.RPCConnect = ""
opts.RPCCertificateFile = ""
}
_, err = flags.Parse(&opts)
if err != nil {
os.Exit(1)
}
if opts.TestNet && opts.SimNet {
fatalf("Multiple decred networks may not be used simultaneously")
}
var activeNet = &netparams.MainNetParams
if opts.TestNet {
activeNet = &netparams.TestNetParams
} else if opts.SimNet {
activeNet = &netparams.SimNetParams
}
if opts.RPCConnect == "" {
fatalf("RPC hostname[:port] is required")
}
rpcConnect, err := cfgutil.NormalizeAddress(opts.RPCConnect, activeNet.RPCServerPort)
if err != nil {
fatalf("Invalid RPC network address `%v`: %v", opts.RPCConnect, err)
}
opts.RPCConnect = rpcConnect
if opts.RPCUsername == "" {
fatalf("RPC username is required")
}
certFileExists, err = cfgutil.FileExists(opts.RPCCertificateFile)
if err != nil {
fatalf("%v", err)
}
if !certFileExists {
fatalf("RPC certificate file `%s` not found", opts.RPCCertificateFile)
}
if opts.FeeRate.Amount > 1e8 {
fatalf("Fee rate `%v/kB` is exceptionally high", opts.FeeRate.Amount)
}
if opts.FeeRate.Amount < 1e2 {
fatalf("Fee rate `%v/kB` is exceptionally low", opts.FeeRate.Amount)
}
if opts.SourceAccount == opts.DestinationAccount {
fatalf("Source and destination accounts should not be equal")
}
if opts.RequiredConfirmations < 0 {
fatalf("Required confirmations must be non-negative")
}
}
// loadConfig initializes and parses the config using a config file and command
// line options.
//
// The configuration proceeds as follows:
// 1) Start with a default config with sane settings
// 2) Pre-parse the command line to check for an alternative config file
// 3) Load configuration file overwriting defaults with any specified options
// 4) Parse CLI options and overwrite/add any specified options
//
// The above results in dcrwallet functioning properly without any config
// settings while still allowing the user to override settings with config files
// and command line options. Command line options always take precedence.
// The bool returned indicates whether or not the wallet was recreated from a
// seed and needs to perform the initial resync. The []byte is the private
// passphrase required to do the sync for this special case.
func loadConfig() (*config, []string, error) {
loadConfigError := func(err error) (*config, []string, error) {
return nil, nil, err
}
// Default config.
cfg := config{
DebugLevel: defaultLogLevel,
ConfigFile: defaultConfigFile,
AppDataDir: defaultAppDataDir,
LogDir: defaultLogDir,
WalletPass: wallet.InsecurePubPassphrase,
PromptPass: defaultPromptPass,
RPCKey: defaultRPCKeyFile,
RPCCert: defaultRPCCertFile,
LegacyRPCMaxClients: defaultRPCMaxClients,
LegacyRPCMaxWebsockets: defaultRPCMaxWebsockets,
EnableStakeMining: defaultEnableStakeMining,
VoteBits: defaultVoteBits,
VoteBitsExtended: defaultVoteBitsExtended,
BalanceToMaintain: defaultBalanceToMaintain,
ReuseAddresses: defaultReuseAddresses,
RollbackTest: defaultRollbackTest,
PruneTickets: defaultPruneTickets,
TicketMaxPrice: defaultTicketMaxPrice,
TicketBuyFreq: defaultTicketBuyFreq,
AutomaticRepair: defaultAutomaticRepair,
UnsafeMainNet: defaultUnsafeMainNet,
AddrIdxScanLen: defaultAddrIdxScanLen,
StakePoolColdExtKey: defaultStakePoolColdExtKey,
AllowHighFees: defaultAllowHighFees,
DataDir: defaultAppDataDir,
}
// Pre-parse the command line options to see if an alternative config
// file or the version flag was specified.
preCfg := cfg
preParser := flags.NewParser(&preCfg, flags.Default)
_, err := preParser.Parse()
if err != nil {
if e, ok := err.(*flags.Error); !ok || e.Type != flags.ErrHelp {
preParser.WriteHelp(os.Stderr)
}
return loadConfigError(err)
}
// Show the version and exit if the version flag was specified.
funcName := "loadConfig"
appName := filepath.Base(os.Args[0])
appName = strings.TrimSuffix(appName, filepath.Ext(appName))
usageMessage := fmt.Sprintf("Use %s -h to show usage", appName)
if preCfg.ShowVersion {
fmt.Println(appName, "version", version())
os.Exit(0)
}
// Load additional config from file.
var configFileError error
parser := flags.NewParser(&cfg, flags.Default)
configFilePath := preCfg.ConfigFile
if configFilePath == defaultConfigFile {
appDataDir := preCfg.AppDataDir
if appDataDir == defaultAppDataDir && preCfg.DataDir != defaultAppDataDir {
appDataDir = cleanAndExpandPath(preCfg.DataDir)
}
if appDataDir != defaultAppDataDir {
configFilePath = filepath.Join(appDataDir, defaultConfigFilename)
}
} else {
configFilePath = cleanAndExpandPath(configFilePath)
}
err = flags.NewIniParser(parser).ParseFile(configFilePath)
if err != nil {
if _, ok := err.(*os.PathError); !ok {
fmt.Fprintln(os.Stderr, err)
parser.WriteHelp(os.Stderr)
return loadConfigError(err)
}
configFileError = err
}
// Parse command line options again to ensure they take precedence.
remainingArgs, err := parser.Parse()
if err != nil {
if e, ok := err.(*flags.Error); !ok || e.Type != flags.ErrHelp {
parser.WriteHelp(os.Stderr)
}
return loadConfigError(err)
}
// Warn about missing config file after the final command line parse
// succeeds. This prevents the warning on help messages and invalid
// options.
if configFileError != nil {
log.Warnf("%v", configFileError)
}
// Check deprecated aliases. The new options receive priority when both
// are changed from the default.
if cfg.DataDir != defaultAppDataDir {
fmt.Fprintln(os.Stderr, "datadir option has been replaced by "+
"appdata -- please update your config")
if cfg.AppDataDir == defaultAppDataDir {
cfg.AppDataDir = cfg.DataDir
}
}
// If an alternate data directory was specified, and paths with defaults
// relative to the data dir are unchanged, modify each path to be
// relative to the new data dir.
if cfg.AppDataDir != defaultAppDataDir {
cfg.AppDataDir = cleanAndExpandPath(cfg.AppDataDir)
if cfg.RPCKey == defaultRPCKeyFile {
cfg.RPCKey = filepath.Join(cfg.AppDataDir, "rpc.key")
}
if cfg.RPCCert == defaultRPCCertFile {
cfg.RPCCert = filepath.Join(cfg.AppDataDir, "rpc.cert")
}
if cfg.LogDir == defaultLogDir {
cfg.LogDir = filepath.Join(cfg.AppDataDir, defaultLogDirname)
}
}
// Choose the active network params based on the selected network.
// Multiple networks can't be selected simultaneously.
numNets := 0
if cfg.TestNet {
activeNet = &netparams.TestNetParams
numNets++
}
if cfg.SimNet {
activeNet = &netparams.SimNetParams
numNets++
}
if numNets > 1 {
str := "%s: The testnet and simnet params can't be used " +
"together -- choose one"
err := fmt.Errorf(str, "loadConfig")
fmt.Fprintln(os.Stderr, err)
parser.WriteHelp(os.Stderr)
return loadConfigError(err)
}
// Append the network type to the log directory so it is "namespaced"
// per network.
cfg.LogDir = cleanAndExpandPath(cfg.LogDir)
cfg.LogDir = filepath.Join(cfg.LogDir, activeNet.Params.Name)
// Special show command to list supported subsystems and exit.
if cfg.DebugLevel == "show" {
fmt.Println("Supported subsystems", supportedSubsystems())
os.Exit(0)
}
// Initialize logging at the default logging level.
initSeelogLogger(filepath.Join(cfg.LogDir, defaultLogFilename))
setLogLevels(defaultLogLevel)
// Parse, validate, and set debug log level(s).
if err := parseAndSetDebugLevels(cfg.DebugLevel); err != nil {
err := fmt.Errorf("%s: %v", "loadConfig", err.Error())
fmt.Fprintln(os.Stderr, err)
parser.WriteHelp(os.Stderr)
return loadConfigError(err)
}
// Exit if you try to use a simulation wallet with a standard
// data directory.
if cfg.AppDataDir == defaultAppDataDir && cfg.CreateTemp {
fmt.Fprintln(os.Stderr, "Tried to create a temporary simulation "+
"wallet, but failed to specify data directory!")
os.Exit(0)
}
// Exit if you try to use a simulation wallet on anything other than
// simnet or testnet.
if !cfg.SimNet && cfg.CreateTemp {
fmt.Fprintln(os.Stderr, "Tried to create a temporary simulation "+
"wallet for network other than simnet!")
os.Exit(0)
}
// Exit if you tried to do rollback testing on a network other than
// simnet.
if cfg.RollbackTest && !cfg.SimNet {
fmt.Fprintln(os.Stderr, "Tried to do rollback testing of "+
"wallet for network other than simnet!")
os.Exit(0)
}
// Ensure the wallet exists or create it when the create flag is set.
netDir := networkDir(cfg.AppDataDir, activeNet.Params)
dbPath := filepath.Join(netDir, walletDbName)
if cfg.CreateTemp && cfg.Create {
err := fmt.Errorf("The flags --create and --createtemp can not " +
"be specified together. Use --help for more information.")
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
dbFileExists, err := cfgutil.FileExists(dbPath)
if err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if cfg.CreateTemp {
tempWalletExists := false
if dbFileExists {
str := fmt.Sprintf("The wallet already exists. Loading this " +
"wallet instead.")
fmt.Fprintln(os.Stdout, str)
tempWalletExists = true
}
// Ensure the data directory for the network exists.
if err := checkCreateDir(netDir); err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if !tempWalletExists {
// Perform the initial wallet creation wizard.
if err := createSimulationWallet(&cfg); err != nil {
fmt.Fprintln(os.Stderr, "Unable to create wallet:", err)
return loadConfigError(err)
}
}
} else if cfg.Create {
// Error if the create flag is set and the wallet already
// exists.
if dbFileExists {
err := fmt.Errorf("The wallet database file `%v` "+
"already exists.", dbPath)
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
// Ensure the data directory for the network exists.
if err := checkCreateDir(netDir); err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
// Perform the initial wallet creation wizard.
if !cfg.CreateWatchingOnly {
if err = createWallet(&cfg); err != nil {
fmt.Fprintln(os.Stderr, "Unable to create wallet:", err)
return loadConfigError(err)
}
} else if cfg.CreateWatchingOnly {
if err = createWatchingOnlyWallet(&cfg); err != nil {
fmt.Fprintln(os.Stderr, "Unable to create wallet:", err)
return loadConfigError(err)
}
}
// Created successfully, so exit now with success.
os.Exit(0)
} else if !dbFileExists && !cfg.NoInitialLoad {
keystorePath := filepath.Join(netDir, keystore.Filename)
keystoreExists, err := cfgutil.FileExists(keystorePath)
if err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if !keystoreExists {
err = fmt.Errorf("The wallet does not exist. Run with the " +
"--create option to initialize and create it.")
} else {
err = fmt.Errorf("The wallet is in legacy format. Run with the " +
"--create option to import it.")
}
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if len(cfg.TicketAddress) != 0 {
_, err := dcrutil.DecodeAddress(cfg.TicketAddress, activeNet.Params)
if err != nil {
err := fmt.Errorf("ticketaddress '%s' failed to decode: %v",
cfg.TicketAddress, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
}
if len(cfg.PoolAddress) != 0 {
_, err := dcrutil.DecodeAddress(cfg.PoolAddress, activeNet.Params)
if err != nil {
err := fmt.Errorf("pooladdress '%s' failed to decode: %v",
cfg.PoolAddress, err)
fmt.Fprintln(os.Stderr, err.Error())
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
}
if cfg.PoolFees != 0.0 {
err := txrules.IsValidPoolFeeRate(cfg.PoolFees)
if err != nil {
err := fmt.Errorf("poolfees '%v' failed to decode: %v",
cfg.PoolFees, err)
fmt.Fprintln(os.Stderr, err.Error())
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
}
if cfg.RPCConnect == "" {
cfg.RPCConnect = net.JoinHostPort("localhost", activeNet.RPCClientPort)
}
// Set ticketfee and txfee to defaults if none are set. Avoiding using default
// confs because they are dcrutil.Amounts
if cfg.TicketFee == 0.0 {
cfg.TicketFee = wallet.DefaultTicketFeeIncrement.ToCoin()
}
if cfg.RelayFee == 0.0 {
cfg.RelayFee = txrules.DefaultRelayFeePerKb.ToCoin()
}
// Add default port to connect flag if missing.
cfg.RPCConnect, err = cfgutil.NormalizeAddress(cfg.RPCConnect,
activeNet.RPCClientPort)
if err != nil {
fmt.Fprintf(os.Stderr,
"Invalid rpcconnect network address: %v\n", err)
return loadConfigError(err)
}
localhostListeners := map[string]struct{}{
"localhost": struct{}{},
"127.0.0.1": struct{}{},
"::1": struct{}{},
}
RPCHost, _, err := net.SplitHostPort(cfg.RPCConnect)
if err != nil {
return loadConfigError(err)
}
if cfg.DisableClientTLS {
if _, ok := localhostListeners[RPCHost]; !ok {
str := "%s: the --noclienttls option may not be used " +
"when connecting RPC to non localhost " +
"addresses: %s"
err := fmt.Errorf(str, funcName, cfg.RPCConnect)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
} else {
// If CAFile is unset, choose either the copy or local dcrd cert.
if cfg.CAFile == "" {
cfg.CAFile = filepath.Join(cfg.AppDataDir, defaultCAFilename)
// If the CA copy does not exist, check if we're connecting to
// a local dcrd and switch to its RPC cert if it exists.
certExists, err := cfgutil.FileExists(cfg.CAFile)
if err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if !certExists {
if _, ok := localhostListeners[RPCHost]; ok {
dcrdCertExists, err := cfgutil.FileExists(
dcrdDefaultCAFile)
if err != nil {
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
if dcrdCertExists {
cfg.CAFile = dcrdDefaultCAFile
}
}
}
}
}
// Only set default RPC listeners when there are no listeners set for
// the experimental RPC server. This is required to prevent the old RPC
// server from sharing listen addresses, since it is impossible to
// remove defaults from go-flags slice options without assigning
// specific behavior to a particular string.
if len(cfg.ExperimentalRPCListeners) == 0 && len(cfg.LegacyRPCListeners) == 0 {
addrs, err := net.LookupHost("localhost")
if err != nil {
return loadConfigError(err)
}
cfg.LegacyRPCListeners = make([]string, 0, len(addrs))
for _, addr := range addrs {
addr = net.JoinHostPort(addr, activeNet.RPCServerPort)
cfg.LegacyRPCListeners = append(cfg.LegacyRPCListeners, addr)
}
}
// Add default port to all rpc listener addresses if needed and remove
// duplicate addresses.
cfg.LegacyRPCListeners, err = cfgutil.NormalizeAddresses(
cfg.LegacyRPCListeners, activeNet.RPCServerPort)
if err != nil {
fmt.Fprintf(os.Stderr,
"Invalid network address in legacy RPC listeners: %v\n", err)
return loadConfigError(err)
}
cfg.ExperimentalRPCListeners, err = cfgutil.NormalizeAddresses(
cfg.ExperimentalRPCListeners, activeNet.RPCServerPort)
if err != nil {
fmt.Fprintf(os.Stderr,
"Invalid network address in RPC listeners: %v\n", err)
return loadConfigError(err)
}
// Both RPC servers may not listen on the same interface/port.
if len(cfg.LegacyRPCListeners) > 0 && len(cfg.ExperimentalRPCListeners) > 0 {
seenAddresses := make(map[string]struct{}, len(cfg.LegacyRPCListeners))
for _, addr := range cfg.LegacyRPCListeners {
seenAddresses[addr] = struct{}{}
}
for _, addr := range cfg.ExperimentalRPCListeners {
_, seen := seenAddresses[addr]
if seen {
err := fmt.Errorf("Address `%s` may not be "+
"used as a listener address for both "+
"RPC servers", addr)
fmt.Fprintln(os.Stderr, err)
return loadConfigError(err)
}
}
}
// Only allow server TLS to be disabled if the RPC server is bound to
// localhost addresses.
if cfg.DisableServerTLS {
allListeners := append(cfg.LegacyRPCListeners,
cfg.ExperimentalRPCListeners...)
for _, addr := range allListeners {
host, _, err := net.SplitHostPort(addr)
if err != nil {
str := "%s: RPC listen interface '%s' is " +
"invalid: %v"
err := fmt.Errorf(str, funcName, addr, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
if _, ok := localhostListeners[host]; !ok {
str := "%s: the --noservertls option may not be used " +
"when binding RPC to non localhost " +
"addresses: %s"
err := fmt.Errorf(str, funcName, addr)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return loadConfigError(err)
}
}
}
// Expand environment variable and leading ~ for filepaths.
cfg.CAFile = cleanAndExpandPath(cfg.CAFile)
cfg.RPCCert = cleanAndExpandPath(cfg.RPCCert)
cfg.RPCKey = cleanAndExpandPath(cfg.RPCKey)
// If the dcrd username or password are unset, use the same auth as for
// the client. The two settings were previously shared for dcrd and
// client auth, so this avoids breaking backwards compatibility while
// allowing users to use different auth settings for dcrd and wallet.
if cfg.DcrdUsername == "" {
cfg.DcrdUsername = cfg.Username
}
if cfg.DcrdPassword == "" {
cfg.DcrdPassword = cfg.Password
}
return &cfg, remainingArgs, nil
}