Ejemplo n.º 1
0
func TestLinkContainers(t *testing.T) {
	// Init driver
	if err := InitDriver(new(Config)); err != nil {
		t.Fatal("Failed to initialize network driver")
	}

	// Allocate interface
	if _, err := Allocate("container_id", "", "", ""); err != nil {
		t.Fatal("Failed to allocate network interface")
	}

	bridgeIface = "lo"
	if _, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter, false); err != nil {
		t.Fatal(err)
	}

	if err := LinkContainers("-I", "172.17.0.1", "172.17.0.2", []nat.Port{nat.Port("1234")}, false); err != nil {
		t.Fatal("LinkContainers failed")
	}

	// flush rules
	if _, err := iptables.Raw([]string{"-F", "DOCKER"}...); err != nil {
		t.Fatal(err)
	}

}
Ejemplo n.º 2
0
func TestLinkContainers(t *testing.T) {
	eng := engine.New()
	eng.Logging = false

	// Init driver
	job := eng.Job("initdriver")
	if res := InitDriver(job); res != engine.StatusOK {
		t.Fatal("Failed to initialize network driver")
	}

	// Allocate interface
	job = eng.Job("allocate_interface", "container_id")
	if res := Allocate(job); res != engine.StatusOK {
		t.Fatal("Failed to allocate network interface")
	}

	job.Args[0] = "-I"

	job.Setenv("ChildIP", "172.17.0.2")
	job.Setenv("ParentIP", "172.17.0.1")
	job.SetenvBool("IgnoreErrors", false)
	job.SetenvList("Ports", []string{"1234"})

	bridgeIface = "lo"
	_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
	if err != nil {
		t.Fatal(err)
	}

	if res := LinkContainers(job); res != engine.StatusOK {
		t.Fatalf("LinkContainers failed")
	}

	// flush rules
	if _, err = iptables.Raw([]string{"-F", "DOCKER"}...); err != nil {
		t.Fatal(err)
	}

}
Ejemplo n.º 3
0
func InitDriver(job *engine.Job) engine.Status {
	var (
		network        *net.IPNet
		enableIPTables = job.GetenvBool("EnableIptables")
		icc            = job.GetenvBool("InterContainerCommunication")
		ipMasq         = job.GetenvBool("EnableIpMasq")
		ipForward      = job.GetenvBool("EnableIpForward")
		bridgeIP       = job.Getenv("BridgeIP")
		fixedCIDR      = job.Getenv("FixedCIDR")
	)

	if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
		defaultBindingIP = net.ParseIP(defaultIP)
	}

	bridgeIface = job.Getenv("BridgeIface")
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addr, err := networkdriver.GetIfaceAddr(bridgeIface)
	if err != nil {
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return job.Error(err)
		}
		// If the bridge interface is not found (or has no address), try to create it and/or add an address
		if err := configureBridge(bridgeIP); err != nil {
			return job.Error(err)
		}

		addr, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return job.Error(err)
		}
		network = addr.(*net.IPNet)
	} else {
		network = addr.(*net.IPNet)
		// validate that the bridge ip matches the ip specified by BridgeIP
		if bridgeIP != "" {
			bip, _, err := net.ParseCIDR(bridgeIP)
			if err != nil {
				return job.Error(err)
			}
			if !network.IP.Equal(bip) {
				return job.Errorf("bridge ip (%s) does not match existing bridge configuration %s", network.IP, bip)
			}
		}
	}

	// Configure iptables for link support
	if enableIPTables {
		if err := setupIPTables(addr, icc, ipMasq); err != nil {
			return job.Error(err)
		}
	}

	if ipForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			job.Logf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER"); err != nil {
		return job.Error(err)
	}

	if enableIPTables {
		chain, err := iptables.NewChain("DOCKER", bridgeIface)
		if err != nil {
			return job.Error(err)
		}
		portmapper.SetIptablesChain(chain)
	}

	bridgeNetwork = network
	if fixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDR)
		if err != nil {
			return job.Error(err)
		}
		log.Debugf("Subnet: %v", subnet)
		if err := ipallocator.RegisterSubnet(bridgeNetwork, subnet); err != nil {
			return job.Error(err)
		}
	}

	// https://github.com/docker/docker/issues/2768
	job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeNetwork.IP)

	for name, f := range map[string]engine.Handler{
		"allocate_interface": Allocate,
		"release_interface":  Release,
		"allocate_port":      AllocatePort,
		"link":               LinkContainers,
	} {
		if err := job.Eng.Register(name, f); err != nil {
			return job.Error(err)
		}
	}
	return engine.StatusOK
}
Ejemplo n.º 4
0
func InitDriver(job *engine.Job) error {
	var (
		networkv4      *net.IPNet
		networkv6      *net.IPNet
		addrv4         net.Addr
		addrsv6        []net.Addr
		enableIPTables = job.GetenvBool("EnableIptables")
		enableIPv6     = job.GetenvBool("EnableIPv6")
		icc            = job.GetenvBool("InterContainerCommunication")
		ipMasq         = job.GetenvBool("EnableIpMasq")
		ipForward      = job.GetenvBool("EnableIpForward")
		bridgeIP       = job.Getenv("BridgeIP")
		bridgeIPv6     = "fe80::1/64"
		fixedCIDR      = job.Getenv("FixedCIDR")
		fixedCIDRv6    = job.Getenv("FixedCIDRv6")
	)

	if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
		defaultBindingIP = net.ParseIP(defaultIP)
	}

	bridgeIface = job.Getenv("BridgeIface")
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addrv4, addrsv6, err := networkdriver.GetIfaceAddr(bridgeIface)

	if err != nil {
		// No Bridge existent, create one
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return err
		}

		// If the iface is not found, try to create it
		if err := configureBridge(bridgeIP, bridgeIPv6, enableIPv6); err != nil {
			return err
		}

		addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return err
		}

		if fixedCIDRv6 != "" {
			// Setting route to global IPv6 subnet
			logrus.Infof("Adding route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
			if err := netlink.AddRoute(fixedCIDRv6, "", "", bridgeIface); err != nil {
				logrus.Fatalf("Could not add route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
			}
		}
	} else {
		// Bridge exists already, getting info...
		// Validate that the bridge ip matches the ip specified by BridgeIP
		if bridgeIP != "" {
			networkv4 = addrv4.(*net.IPNet)
			bip, _, err := net.ParseCIDR(bridgeIP)
			if err != nil {
				return err
			}
			if !networkv4.IP.Equal(bip) {
				return fmt.Errorf("Bridge ip (%s) does not match existing bridge configuration %s", networkv4.IP, bip)
			}
		}

		// A bridge might exist but not have any IPv6 addr associated with it yet
		// (for example, an existing Docker installation that has only been used
		// with IPv4 and docker0 already is set up) In that case, we can perform
		// the bridge init for IPv6 here, else we will error out below if --ipv6=true
		if len(addrsv6) == 0 && enableIPv6 {
			if err := setupIPv6Bridge(bridgeIPv6); err != nil {
				return err
			}
			// Recheck addresses now that IPv6 is setup on the bridge
			addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
			if err != nil {
				return err
			}
		}

		// TODO: Check if route to fixedCIDRv6 is set
	}

	if enableIPv6 {
		bip6, _, err := net.ParseCIDR(bridgeIPv6)
		if err != nil {
			return err
		}
		found := false
		for _, addrv6 := range addrsv6 {
			networkv6 = addrv6.(*net.IPNet)
			if networkv6.IP.Equal(bip6) {
				found = true
				break
			}
		}
		if !found {
			return fmt.Errorf("Bridge IPv6 does not match existing bridge configuration %s", bip6)
		}
	}

	networkv4 = addrv4.(*net.IPNet)

	if enableIPv6 {
		if len(addrsv6) == 0 {
			return errors.New("IPv6 enabled but no IPv6 detected")
		}
		bridgeIPv6Addr = networkv6.IP
	}

	// Configure iptables for link support
	if enableIPTables {
		if err := setupIPTables(addrv4, icc, ipMasq); err != nil {
			return err
		}

	}

	if ipForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			logrus.Warnf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}

		if fixedCIDRv6 != "" {
			// Enable IPv6 forwarding
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/default/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 default forwarding: %s\n", err)
			}
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/all/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 all forwarding: %s\n", err)
			}
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER", iptables.Nat); err != nil {
		return err
	}

	if enableIPTables {
		_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Nat)
		if err != nil {
			return err
		}
		chain, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
		if err != nil {
			return err
		}
		portmapper.SetIptablesChain(chain)
	}

	bridgeIPv4Network = networkv4
	if fixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDR)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(bridgeIPv4Network, subnet); err != nil {
			return err
		}
	}

	if fixedCIDRv6 != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDRv6)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(subnet, subnet); err != nil {
			return err
		}
		globalIPv6Network = subnet
	}

	// Block BridgeIP in IP allocator
	ipAllocator.RequestIP(bridgeIPv4Network, bridgeIPv4Network.IP)

	// https://github.com/docker/docker/issues/2768
	job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeIPv4Network.IP)

	for name, f := range map[string]engine.Handler{
		"allocate_interface": Allocate,
		"release_interface":  Release,
		"allocate_port":      AllocatePort,
		"link":               LinkContainers,
	} {
		if err := job.Eng.Register(name, f); err != nil {
			return err
		}
	}
	return nil
}
Ejemplo n.º 5
0
func InitDriver(config *Config) error {
	var (
		networkv4  *net.IPNet
		networkv6  *net.IPNet
		addrv4     net.Addr
		addrsv6    []net.Addr
		bridgeIPv6 = "fe80::1/64"
	)
	initPortMapper()

	if config.DefaultIp != nil {
		defaultBindingIP = config.DefaultIp
	}

	bridgeIface = config.Iface
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addrv4, addrsv6, err := networkdriver.GetIfaceAddr(bridgeIface)

	if err != nil {
		// No Bridge existent, create one
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return err
		}

		logrus.Info("Bridge interface not found, trying to create it")

		// If the iface is not found, try to create it
		if err := configureBridge(config.IP, bridgeIPv6, config.EnableIPv6); err != nil {
			logrus.Errorf("Could not configure Bridge: %s", err)
			return err
		}

		addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return err
		}

		if config.FixedCIDRv6 != "" {
			// Setting route to global IPv6 subnet
			logrus.Infof("Adding route to IPv6 network %q via device %q", config.FixedCIDRv6, bridgeIface)
			if err := netlink.AddRoute(config.FixedCIDRv6, "", "", bridgeIface); err != nil {
				logrus.Fatalf("Could not add route to IPv6 network %q via device %q", config.FixedCIDRv6, bridgeIface)
			}
		}
	} else {
		// Bridge exists already, getting info...
		// Validate that the bridge ip matches the ip specified by BridgeIP
		if config.IP != "" {
			networkv4 = addrv4.(*net.IPNet)
			bip, _, err := net.ParseCIDR(config.IP)
			if err != nil {
				return err
			}
			if !networkv4.IP.Equal(bip) {
				return fmt.Errorf("Bridge ip (%s) does not match existing bridge configuration %s", networkv4.IP, bip)
			}
		}

		// A bridge might exist but not have any IPv6 addr associated with it yet
		// (for example, an existing Docker installation that has only been used
		// with IPv4 and docker0 already is set up) In that case, we can perform
		// the bridge init for IPv6 here, else we will error out below if --ipv6=true
		if len(addrsv6) == 0 && config.EnableIPv6 {
			if err := setupIPv6Bridge(bridgeIPv6); err != nil {
				return err
			}
			// Recheck addresses now that IPv6 is setup on the bridge
			addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
			if err != nil {
				return err
			}
		}

		// TODO: Check if route to config.FixedCIDRv6 is set
	}

	if config.EnableIPv6 {
		bip6, _, err := net.ParseCIDR(bridgeIPv6)
		if err != nil {
			return err
		}
		found := false
		for _, addrv6 := range addrsv6 {
			networkv6 = addrv6.(*net.IPNet)
			if networkv6.IP.Equal(bip6) {
				found = true
				break
			}
		}
		if !found {
			return fmt.Errorf("Bridge IPv6 does not match existing bridge configuration %s", bip6)
		}
	}

	networkv4 = addrv4.(*net.IPNet)

	if config.EnableIPv6 {
		if len(addrsv6) == 0 {
			return errors.New("IPv6 enabled but no IPv6 detected")
		}
		bridgeIPv6Addr = networkv6.IP
	}

	// Configure iptables for link support
	if config.EnableIptables {
		if err := setupIPTables(addrv4, config.InterContainerCommunication, config.EnableIpMasq); err != nil {
			logrus.Errorf("Error configuing iptables: %s", err)
			return err
		}

	}

	if config.EnableIpForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			logrus.Warnf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}

		if config.FixedCIDRv6 != "" {
			// Enable IPv6 forwarding
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/default/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 default forwarding: %s\n", err)
			}
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/all/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 all forwarding: %s\n", err)
			}
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER", iptables.Nat); err != nil {
		return err
	}

	if config.EnableIptables {
		_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Nat)
		if err != nil {
			return err
		}
		chain, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
		if err != nil {
			return err
		}
		portMapper.SetIptablesChain(chain)
	}

	bridgeIPv4Network = networkv4
	if config.FixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(config.FixedCIDR)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(bridgeIPv4Network, subnet); err != nil {
			logrus.Errorf("Error registering subnet for IPv4 bridge network: %s", err)
			return err
		}
	}

	if config.FixedCIDRv6 != "" {
		_, subnet, err := net.ParseCIDR(config.FixedCIDRv6)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(subnet, subnet); err != nil {
			logrus.Errorf("Error registering subnet for IPv6 bridge network: %s", err)
			return err
		}
		globalIPv6Network = subnet
	}

	// Block BridgeIP in IP allocator
	ipAllocator.RequestIP(bridgeIPv4Network, bridgeIPv4Network.IP)

	return nil
}