// parseBindMount validates the configuration of mount information in runconfig is valid.
func parseBindMount(spec, volumeDriver string) (*mountPoint, error) {
bind := &mountPoint{
RW: true,
}
arr := strings.Split(spec, ":")
switch len(arr) {
case 2:
bind.Destination = arr[1]
case 3:
bind.Destination = arr[1]
mode := arr[2]
if !volume.ValidMountMode(mode) {
return nil, fmt.Errorf("invalid mode for volumes-from: %s", mode)
}
bind.RW = volume.ReadWrite(mode)
// Mode field is used by SELinux to decide whether to apply label
bind.Mode = mode
default:
return nil, fmt.Errorf("Invalid volume specification: %s", spec)
}
//validate the volumes destination path
if !filepath.IsAbs(bind.Destination) {
return nil, fmt.Errorf("Invalid volume destination path: %s mount path must be absolute.", bind.Destination)
}
name, source, err := parseVolumeSource(arr[0])
if err != nil {
return nil, err
}
if len(source) == 0 {
bind.Driver = volumeDriver
if len(bind.Driver) == 0 {
bind.Driver = volume.DefaultDriverName
}
} else {
bind.Source = filepath.Clean(source)
}
bind.Name = name
bind.Destination = filepath.Clean(bind.Destination)
return bind, nil
}
// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reassigned.
func (daemon *Daemon) registerMountPoints(container *container.Container, hostConfig *containertypes.HostConfig) (retErr error) {
binds := map[string]bool{}
mountPoints := map[string]*volume.MountPoint{}
defer func() {
// clean up the container mountpoints once return with error
if retErr != nil {
for _, m := range mountPoints {
if m.Volume == nil {
continue
}
daemon.volumes.Dereference(m.Volume, container.ID)
}
}
}()
// 1. Read already configured mount points.
for destination, point := range container.MountPoints {
mountPoints[destination] = point
}
// 2. Read volumes from other containers.
for _, v := range hostConfig.VolumesFrom {
containerID, mode, err := volume.ParseVolumesFrom(v)
if err != nil {
return err
}
c, err := daemon.GetContainer(containerID)
if err != nil {
return err
}
for _, m := range c.MountPoints {
cp := &volume.MountPoint{
Name: m.Name,
Source: m.Source,
RW: m.RW && volume.ReadWrite(mode),
Driver: m.Driver,
Destination: m.Destination,
Propagation: m.Propagation,
Spec: m.Spec,
CopyData: false,
}
if len(cp.Source) == 0 {
v, err := daemon.volumes.GetWithRef(cp.Name, cp.Driver, container.ID)
if err != nil {
return err
}
cp.Volume = v
}
mountPoints[cp.Destination] = cp
}
}
// 3. Read bind mounts
for _, b := range hostConfig.Binds {
bind, err := volume.ParseMountRaw(b, hostConfig.VolumeDriver)
if err != nil {
return err
}
// #10618
_, tmpfsExists := hostConfig.Tmpfs[bind.Destination]
if binds[bind.Destination] || tmpfsExists {
return fmt.Errorf("Duplicate mount point '%s'", bind.Destination)
}
if bind.Type == mounttypes.TypeVolume {
// create the volume
v, err := daemon.volumes.CreateWithRef(bind.Name, bind.Driver, container.ID, nil, nil)
if err != nil {
return err
}
bind.Volume = v
bind.Source = v.Path()
// bind.Name is an already existing volume, we need to use that here
bind.Driver = v.DriverName()
if bind.Driver == volume.DefaultDriverName {
setBindModeIfNull(bind)
}
}
binds[bind.Destination] = true
mountPoints[bind.Destination] = bind
}
for _, cfg := range hostConfig.Mounts {
mp, err := volume.ParseMountSpec(cfg)
if err != nil {
return dockererrors.NewBadRequestError(err)
}
if binds[mp.Destination] {
return fmt.Errorf("Duplicate mount point '%s'", cfg.Target)
}
if mp.Type == mounttypes.TypeVolume {
var v volume.Volume
if cfg.VolumeOptions != nil {
var driverOpts map[string]string
if cfg.VolumeOptions.DriverConfig != nil {
driverOpts = cfg.VolumeOptions.DriverConfig.Options
}
v, err = daemon.volumes.CreateWithRef(mp.Name, mp.Driver, container.ID, driverOpts, cfg.VolumeOptions.Labels)
} else {
v, err = daemon.volumes.CreateWithRef(mp.Name, mp.Driver, container.ID, nil, nil)
}
if err != nil {
return err
}
if err := label.Relabel(mp.Source, container.MountLabel, false); err != nil {
return err
}
mp.Volume = v
mp.Name = v.Name()
mp.Driver = v.DriverName()
// only use the cached path here since getting the path is not necessary right now and calling `Path()` may be slow
if cv, ok := v.(interface {
CachedPath() string
}); ok {
mp.Source = cv.CachedPath()
}
}
binds[mp.Destination] = true
mountPoints[mp.Destination] = mp
}
container.Lock()
// 4. Cleanup old volumes that are about to be reassigned.
for _, m := range mountPoints {
if m.BackwardsCompatible() {
if mp, exists := container.MountPoints[m.Destination]; exists && mp.Volume != nil {
daemon.volumes.Dereference(mp.Volume, container.ID)
}
}
}
container.MountPoints = mountPoints
container.Unlock()
return nil
}
// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
func (daemon *Daemon) registerMountPoints(container *Container, hostConfig *runconfig.HostConfig) error {
binds := map[string]bool{}
mountPoints := map[string]*mountPoint{}
// 1. Read already configured mount points.
for name, point := range container.MountPoints {
mountPoints[name] = point
}
// 2. Read volumes from other containers.
for _, v := range hostConfig.VolumesFrom {
containerID, mode, err := parseVolumesFrom(v)
if err != nil {
return err
}
c, err := daemon.Get(containerID)
if err != nil {
return err
}
for _, m := range c.MountPoints {
cp := &mountPoint{
Name: m.Name,
Source: m.Source,
RW: m.RW && volume.ReadWrite(mode),
Driver: m.Driver,
Destination: m.Destination,
}
if len(cp.Source) == 0 {
v, err := daemon.createVolume(cp.Name, cp.Driver, nil)
if err != nil {
return err
}
cp.Volume = v
}
mountPoints[cp.Destination] = cp
}
}
// 3. Read bind mounts
for _, b := range hostConfig.Binds {
// #10618
bind, err := parseBindMount(b, container.MountLabel, container.Config)
if err != nil {
return err
}
if binds[bind.Destination] {
return fmt.Errorf("Duplicate bind mount %s", bind.Destination)
}
if len(bind.Name) > 0 && len(bind.Driver) > 0 {
// create the volume
v, err := daemon.createVolume(bind.Name, bind.Driver, nil)
if err != nil {
return err
}
bind.Volume = v
bind.Source = v.Path()
// Since this is just a named volume and not a typical bind, set to shared mode `z`
if bind.Mode == "" {
bind.Mode = "z"
}
}
if err := label.Relabel(bind.Source, container.MountLabel, bind.Mode); err != nil {
return err
}
binds[bind.Destination] = true
mountPoints[bind.Destination] = bind
}
// Keep backwards compatible structures
bcVolumes := map[string]string{}
bcVolumesRW := map[string]bool{}
for _, m := range mountPoints {
if m.BackwardsCompatible() {
bcVolumes[m.Destination] = m.Path()
bcVolumesRW[m.Destination] = m.RW
// This mountpoint is replacing an existing one, so the count needs to be decremented
if mp, exists := container.MountPoints[m.Destination]; exists && mp.Volume != nil {
daemon.volumes.Decrement(mp.Volume)
}
}
}
container.Lock()
container.MountPoints = mountPoints
container.Volumes = bcVolumes
container.VolumesRW = bcVolumesRW
container.Unlock()
return nil
}
// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reasigned.
func (daemon *Daemon) registerMountPoints(container *Container, hostConfig *runconfig.HostConfig) error {
binds := map[string]bool{}
mountPoints := map[string]*volume.MountPoint{}
// 1. Read already configured mount points.
for name, point := range container.MountPoints {
mountPoints[name] = point
}
// 2. Read volumes from other containers.
for _, v := range hostConfig.VolumesFrom {
containerID, mode, err := volume.ParseVolumesFrom(v)
if err != nil {
return err
}
c, err := daemon.Get(containerID)
if err != nil {
return err
}
for _, m := range c.MountPoints {
cp := &volume.MountPoint{
Name: m.Name,
Source: m.Source,
RW: m.RW && volume.ReadWrite(mode),
Driver: m.Driver,
Destination: m.Destination,
}
if len(cp.Source) == 0 {
v, err := daemon.createVolume(cp.Name, cp.Driver, nil)
if err != nil {
return err
}
cp.Volume = v
}
mountPoints[cp.Destination] = cp
}
}
// 3. Read bind mounts
for _, b := range hostConfig.Binds {
// #10618
bind, err := volume.ParseMountSpec(b, hostConfig.VolumeDriver)
if err != nil {
return err
}
if binds[bind.Destination] {
return derr.ErrorCodeVolumeDup.WithArgs(bind.Destination)
}
if len(bind.Name) > 0 && len(bind.Driver) > 0 {
// create the volume
v, err := daemon.createVolume(bind.Name, bind.Driver, nil)
if err != nil {
return err
}
bind.Volume = v
bind.Source = v.Path()
// bind.Name is an already existing volume, we need to use that here
bind.Driver = v.DriverName()
bind = setBindModeIfNull(bind)
}
if label.RelabelNeeded(bind.Mode) {
if err := label.Relabel(bind.Source, container.MountLabel, label.IsShared(bind.Mode)); err != nil {
return err
}
}
binds[bind.Destination] = true
mountPoints[bind.Destination] = bind
}
container.Lock()
// 4. Cleanup old volumes that are about to be reasigned.
for _, m := range mountPoints {
if m.BackwardsCompatible() {
if mp, exists := container.MountPoints[m.Destination]; exists && mp.Volume != nil {
daemon.volumes.Decrement(mp.Volume)
}
}
}
container.MountPoints = mountPoints
container.Unlock()
return nil
}
// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reassigned.
func (daemon *Daemon) registerMountPoints(container *container.Container, hostConfig *containertypes.HostConfig) (retErr error) {
binds := map[string]bool{}
mountPoints := map[string]*volume.MountPoint{}
defer func() {
// clean up the container mountpoints once return with error
if retErr != nil {
for _, m := range mountPoints {
if m.Volume == nil {
continue
}
daemon.volumes.Dereference(m.Volume, container.ID)
}
}
}()
// 1. Read already configured mount points.
for name, point := range container.MountPoints {
mountPoints[name] = point
}
// 2. Read volumes from other containers.
for _, v := range hostConfig.VolumesFrom {
containerID, mode, err := volume.ParseVolumesFrom(v)
if err != nil {
return err
}
c, err := daemon.GetContainer(containerID)
if err != nil {
return err
}
for _, m := range c.MountPoints {
cp := &volume.MountPoint{
Name: m.Name,
Source: m.Source,
RW: m.RW && volume.ReadWrite(mode),
Driver: m.Driver,
Destination: m.Destination,
Propagation: m.Propagation,
Named: m.Named,
}
if len(cp.Source) == 0 {
v, err := daemon.volumes.GetWithRef(cp.Name, cp.Driver, container.ID)
if err != nil {
return err
}
cp.Volume = v
}
mountPoints[cp.Destination] = cp
}
}
// 3. Read bind mounts
for _, b := range hostConfig.Binds {
// #10618
bind, err := volume.ParseMountSpec(b, hostConfig.VolumeDriver)
if err != nil {
return err
}
_, tmpfsExists := hostConfig.Tmpfs[bind.Destination]
if binds[bind.Destination] || tmpfsExists {
return fmt.Errorf("Duplicate mount point '%s'", bind.Destination)
}
if len(bind.Name) > 0 {
// create the volume
v, err := daemon.volumes.CreateWithRef(bind.Name, bind.Driver, container.ID, nil, nil)
if err != nil {
return err
}
bind.Volume = v
bind.Source = v.Path()
// bind.Name is an already existing volume, we need to use that here
bind.Driver = v.DriverName()
bind.Named = true
if bind.Driver == "local" {
bind = setBindModeIfNull(bind)
}
}
binds[bind.Destination] = true
mountPoints[bind.Destination] = bind
}
container.Lock()
// 4. Cleanup old volumes that are about to be reassigned.
for _, m := range mountPoints {
if m.BackwardsCompatible() {
if mp, exists := container.MountPoints[m.Destination]; exists && mp.Volume != nil {
daemon.volumes.Dereference(mp.Volume, container.ID)
}
}
}
container.MountPoints = mountPoints
container.Unlock()
return nil
}