Ejemplo n.º 1
0
Archivo: main.go Proyecto: raylee/gocnc
func (vm *Machine) feedRate(stmt *gcode.Block) {
	if val, err := stmt.GetWord('F'); err == nil {
		if vm.Imperial {
			val *= 25.4
		}
		vm.State.Feedrate = val
		stmt.RemoveAddress('F')
	} else if vm.State.FeedMode == FeedModeInvTime {
		vm.State.Feedrate = -1
	}
}
Ejemplo n.º 2
0
// Calculates the absolute position of the given statement, including optional I, J, K parameters.
// Units are converted, and coordinate system applied unless overridden.
func (vm *Machine) calcPos(stmt gcode.Block) (newX, newY, newZ, newI, newJ, newK float64) {
	pos := vm.curPos()
	var err error

	coordinateSystem := vm.CoordinateSystem.GetCoordinateSystem()

	if vm.CoordinateSystem.OverrideActive() {
		oldAbsolute := vm.AbsoluteMove
		vm.AbsoluteMove = true
		defer func() {
			vm.AbsoluteMove = oldAbsolute
		}()
	}

	if newX, err = stmt.GetWord('X'); err != nil {
		newX = pos.X
	} else {
		if vm.Imperial {
			newX *= 25.4
		}
		if !vm.AbsoluteMove {
			newX += pos.X
		} else {
			newX += coordinateSystem.X
		}
	}

	if newY, err = stmt.GetWord('Y'); err != nil {
		newY = pos.Y
	} else {
		if vm.Imperial {
			newY *= 25.4
		}
		if !vm.AbsoluteMove {
			newY += pos.Y
		} else {
			newY += coordinateSystem.Y
		}
	}

	if newZ, err = stmt.GetWord('Z'); err != nil {
		newZ = pos.Z
	} else {
		if vm.Imperial {
			newZ *= 25.4
		}
		if !vm.AbsoluteMove {
			newZ += pos.Z
		} else {
			newZ += coordinateSystem.Z
		}
	}

	newI = stmt.GetWordDefault('I', 0.0)
	newJ = stmt.GetWordDefault('J', 0.0)
	newK = stmt.GetWordDefault('K', 0.0)

	if vm.Imperial {
		newI *= 25.4
		newJ *= 25.4
		newK *= 25.4
	}

	if !vm.AbsoluteArc {
		newI += pos.X
		newJ += pos.Y
		newK += pos.Z
	} else {
		newI += coordinateSystem.X
		newJ += coordinateSystem.Y
		newZ += coordinateSystem.Z
	}

	return newX, newY, newZ, newI, newJ, newK
}
Ejemplo n.º 3
0
Archivo: main.go Proyecto: raylee/gocnc
func (vm *Machine) nonModals(stmt *gcode.Block) {
	if w, err := stmt.GetModalGroup("nonModalGroup"); err == nil {
		if w != nil {
			if w.Address != 'G' {
				unknownCommand("nonModalGroup", w)
			}

			switch w.Command {
			case 4:
				if val, err := stmt.GetWord('P'); err == nil {
					if val < 0 {
						invalidCommand("nonModalGroup", "dwell", "P word negative")
					}
					vm.dwell(val)
				} else {
					invalidCommand("nonModalGroup", "dwell", "P word not specified or specified multiple times")
				}
				stmt.RemoveAddress('P')

			case 10:
				if val, err := stmt.GetWord('L'); err == nil {
					if val == 2 {
						// Set coordinate system offsets
						if cs, err := stmt.GetWord('P'); err == nil {
							cs := int(cs)
							x, y, z := stmt.GetWordDefault('X', 0), stmt.GetWordDefault('Y', 0), stmt.GetWordDefault('Z', 0)
							x, y, z = vm.axesToMetric(x, y, z)

							vm.CoordinateSystem.SetCoordinateSystem(x, y, z, cs)
							stmt.RemoveAddress('X', 'Y', 'Z')
						} else {
							invalidCommand("nonModalGroup", "coordinate system configuration", "P word not specified or specified multiple times")
						}
						stmt.RemoveAddress('P')
					}
				} else {
					invalidCommand("nonModalGroup", "G10 configuration", "L word not specified or specified multiple times")
				}
				stmt.RemoveAddress('L')

			case 28:

				oldMode := vm.State.MoveMode
				vm.State.MoveMode = MoveModeRapid
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					newX, newY, newZ, _, _, _ := vm.calcPos(*stmt)
					vm.move(newX, newY, newZ)
					stmt.RemoveAddress('X', 'Y', 'Z')
				}
				vm.move(vm.StoredPos1.X, vm.StoredPos1.Y, vm.StoredPos1.Z)
				vm.State.MoveMode = oldMode

			case 28.1:
				pos := vm.curPos()
				vm.StoredPos1 = pos.Vector()

			case 30:
				oldMode := vm.State.MoveMode
				vm.State.MoveMode = MoveModeRapid
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					newX, newY, newZ, _, _, _ := vm.calcPos(*stmt)
					vm.move(newX, newY, newZ)
					stmt.RemoveAddress('X', 'Y', 'Z')
				}
				vm.move(vm.StoredPos2.X, vm.StoredPos2.Y, vm.StoredPos2.Z)
				vm.State.MoveMode = oldMode

			case 30.1:
				pos := vm.curPos()
				vm.StoredPos2 = pos.Vector()

			case 53:
				vm.CoordinateSystem.Override()

			case 92:
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					cp := vm.curPos()
					x, y, z := stmt.GetWordDefault('X', 0), stmt.GetWordDefault('Y', 0), stmt.GetWordDefault('Z', 0)
					x, y, z = vm.axesToMetric(x, y, z)

					vm.CoordinateSystem.DisableOffset()
					x, y, z = vm.CoordinateSystem.ApplyCoordinateSystem(x, y, z)
					diffX, diffY, diffZ := cp.X-x, cp.Y-y, cp.Z-z
					vm.CoordinateSystem.SetOffset(diffX, diffY, diffZ)
					vm.CoordinateSystem.EnableOffset()

					stmt.RemoveAddress('X', 'Y', 'Z')
				} else {
					invalidCommand("nonModalGroup", "G92 configuration", "No axis words specified")
				}
			case 92.1:
				vm.CoordinateSystem.EraseOffset()

			case 92.2:
				vm.CoordinateSystem.DisableOffset()

			case 92.3:
				vm.CoordinateSystem.EnableOffset()

			default:
				unknownCommand("nonModalGroup", w)

			}
			stmt.Remove(w)
		}
	} else {
		propagate(err)
	}
}
Ejemplo n.º 4
0
Archivo: main.go Proyecto: raylee/gocnc
func (vm *Machine) nextTool(stmt *gcode.Block) {
	if val, err := stmt.GetWord('T'); err == nil {
		vm.NextTool = int(val)
		stmt.RemoveAddress('T')
	}
}
Ejemplo n.º 5
0
Archivo: main.go Proyecto: raylee/gocnc
func (vm *Machine) spindleSpeed(stmt *gcode.Block) {
	if val, err := stmt.GetWord('S'); err == nil {
		vm.State.SpindleSpeed = val
		stmt.RemoveAddress('S')
	}
}