Ejemplo n.º 1
0
func (s *HostPortSuite) TestEnsureFirstHostPort(c *gc.C) {
	first := network.NewHostPorts(1234, "1.2.3.4")[0]

	// Without any HostPorts, it still works.
	hps := network.EnsureFirstHostPort(first, []network.HostPort{})
	c.Assert(hps, jc.DeepEquals, []network.HostPort{first})

	// If already there, no changes happen.
	hps = s.makeHostPorts()
	result := network.EnsureFirstHostPort(hps[0], hps)
	c.Assert(result, jc.DeepEquals, hps)

	// If not at the top, pop it up and put it on top.
	firstLast := append(hps, first)
	result = network.EnsureFirstHostPort(first, firstLast)
	c.Assert(result, jc.DeepEquals, append([]network.HostPort{first}, hps...))
}
Ejemplo n.º 2
0
Archivo: api.go Proyecto: kat-co/juju
// PrepareEndpointsForCaching performs the necessary operations on the
// given API hostPorts so they are suitable for saving into the
// controller.yaml file, taking into account the addrConnectedTo
// and the existing config store info:
//
// 1. Collapses hostPorts into a single slice.
// 2. Filters out machine-local and link-local addresses.
// 3. Removes any duplicates
// 4. Call network.SortHostPorts() on the list.
// 5. Puts the addrConnectedTo on top.
// 6. Compares the result against info.APIEndpoint.Hostnames.
// 7. If the addresses differ, call network.ResolveOrDropHostnames()
// on the list and perform all steps again from step 1.
// 8. Compare the list of resolved addresses against the cached info
// APIEndpoint.Addresses, and if changed return both addresses and
// hostnames as strings (so they can be cached on APIEndpoint) and
// set haveChanged to true.
// 9. If the hostnames haven't changed, return two empty slices and set
// haveChanged to false. No DNS resolution is performed to save time.
//
// This is used right after bootstrap to saved the initial API
// endpoints, as well as on each CLI connection to verify if the
// saved endpoints need updating.
//
// TODO(rogpeppe) this function mixes too many concerns - the
// logic is difficult to follow and has non-obvious properties.
func PrepareEndpointsForCaching(
	controllerDetails jujuclient.ControllerDetails,
	hostPorts [][]network.HostPort,
	addrConnectedTo ...network.HostPort,
) (addrs, unresolvedAddrs []string, haveChanged bool) {
	processHostPorts := func(allHostPorts [][]network.HostPort) []network.HostPort {
		uniqueHPs := usableHostPorts(allHostPorts)
		network.SortHostPorts(uniqueHPs)
		for _, addr := range addrConnectedTo {
			uniqueHPs = network.EnsureFirstHostPort(addr, uniqueHPs)
		}
		return uniqueHPs
	}

	apiHosts := processHostPorts(hostPorts)
	hostsStrings := network.HostPortsToStrings(apiHosts)
	needResolving := false

	// Verify if the unresolved addresses have changed.
	if len(apiHosts) > 0 && len(controllerDetails.UnresolvedAPIEndpoints) > 0 {
		if addrsChanged(hostsStrings, controllerDetails.UnresolvedAPIEndpoints) {
			logger.Debugf(
				"API hostnames changed from %v to %v - resolving hostnames",
				controllerDetails.UnresolvedAPIEndpoints, hostsStrings,
			)
			needResolving = true
		}
	} else if len(apiHosts) > 0 {
		// No cached hostnames, most likely right after bootstrap.
		logger.Debugf("API hostnames %v - resolving hostnames", hostsStrings)
		needResolving = true
	}
	if !needResolving {
		// We're done - nothing changed.
		logger.Debugf("API hostnames unchanged - not resolving")
		return nil, nil, false
	}
	// Perform DNS resolution and check against APIEndpoints.Addresses.
	resolved := resolveOrDropHostnames(apiHosts)
	apiAddrs := processHostPorts([][]network.HostPort{resolved})
	addrsStrings := network.HostPortsToStrings(apiAddrs)
	if len(apiAddrs) > 0 && len(controllerDetails.APIEndpoints) > 0 {
		if addrsChanged(addrsStrings, controllerDetails.APIEndpoints) {
			logger.Infof(
				"API addresses changed from %v to %v",
				controllerDetails.APIEndpoints, addrsStrings,
			)
			return addrsStrings, hostsStrings, true
		}
	} else if len(apiAddrs) > 0 {
		// No cached addresses, most likely right after bootstrap.
		logger.Infof("new API addresses to cache %v", addrsStrings)
		return addrsStrings, hostsStrings, true
	}
	// No changes.
	logger.Debugf("API addresses unchanged")
	return nil, nil, false
}
Ejemplo n.º 3
0
// PrepareEndpointsForCaching performs the necessary operations on the
// given API hostPorts so they are suitable for caching into the
// environment's .jenv file, taking into account the addrConnectedTo
// and the existing config store info:
//
// 1. Collapses hostPorts into a single slice.
// 2. Filters out machine-local and link-local addresses.
// 3. Removes any duplicates
// 4. Call network.SortHostPorts() on the list, respecing prefer-ipv6
// flag.
// 5. Puts the addrConnectedTo on top.
// 6. Compares the result against info.APIEndpoint.Hostnames.
// 7. If the addresses differ, call network.ResolveOrDropHostnames()
// on the list and perform all steps again from step 1.
// 8. Compare the list of resolved addresses against the cached info
// APIEndpoint.Addresses, and if changed return both addresses and
// hostnames as strings (so they can be cached on APIEndpoint) and
// set haveChanged to true.
// 9. If the hostnames haven't changed, return two empty slices and set
// haveChanged to false. No DNS resolution is performed to save time.
//
// This is used right after bootstrap to cache the initial API
// endpoints, as well as on each CLI connection to verify if the
// cached endpoints need updating.
func PrepareEndpointsForCaching(info configstore.EnvironInfo, hostPorts [][]network.HostPort, addrConnectedTo network.HostPort) (addresses, hostnames []string, haveChanged bool) {
	processHostPorts := func(allHostPorts [][]network.HostPort) []network.HostPort {
		collapsedHPs := network.CollapseHostPorts(allHostPorts)
		filteredHPs := network.FilterUnusableHostPorts(collapsedHPs)
		uniqueHPs := network.DropDuplicatedHostPorts(filteredHPs)
		// Sort the result to prefer public IPs on top (when prefer-ipv6
		// is true, IPv6 addresses of the same scope will come before IPv4
		// ones).
		preferIPv6 := maybePreferIPv6(info)
		network.SortHostPorts(uniqueHPs, preferIPv6)

		if addrConnectedTo.Value != "" {
			return network.EnsureFirstHostPort(addrConnectedTo, uniqueHPs)
		}
		// addrConnectedTo can be empty only right after bootstrap.
		return uniqueHPs
	}

	apiHosts := processHostPorts(hostPorts)
	hostsStrings := network.HostPortsToStrings(apiHosts)
	endpoint := info.APIEndpoint()
	needResolving := false

	// Verify if the unresolved addresses have changed.
	if len(apiHosts) > 0 && len(endpoint.Hostnames) > 0 {
		if addrsChanged(hostsStrings, endpoint.Hostnames) {
			logger.Debugf(
				"API hostnames changed from %v to %v - resolving hostnames",
				endpoint.Hostnames, hostsStrings,
			)
			needResolving = true
		}
	} else if len(apiHosts) > 0 {
		// No cached hostnames, most likely right after bootstrap.
		logger.Debugf("API hostnames %v - resolving hostnames", hostsStrings)
		needResolving = true
	}
	if !needResolving {
		// We're done - nothing changed.
		logger.Debugf("API hostnames unchanged - not resolving")
		return nil, nil, false
	}
	// Perform DNS resolution and check against APIEndpoints.Addresses.
	resolved := resolveOrDropHostnames(apiHosts)
	apiAddrs := processHostPorts([][]network.HostPort{resolved})
	addrsStrings := network.HostPortsToStrings(apiAddrs)
	if len(apiAddrs) > 0 && len(endpoint.Addresses) > 0 {
		if addrsChanged(addrsStrings, endpoint.Addresses) {
			logger.Infof(
				"API addresses changed from %v to %v",
				endpoint.Addresses, addrsStrings,
			)
			return addrsStrings, hostsStrings, true
		}
	} else if len(apiAddrs) > 0 {
		// No cached addresses, most likely right after bootstrap.
		logger.Infof("new API addresses to cache %v", addrsStrings)
		return addrsStrings, hostsStrings, true
	}
	// No changes.
	logger.Debugf("API addresses unchanged")
	return nil, nil, false
}