// Manifolds returns a set of co-configured manifolds covering the
// various responsibilities of a machine agent.
//
// Thou Shalt Not Use String Literals In This Function. Or Else.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
// connectFilter exists:
// 1) to let us retry api connections immediately on password change,
// rather than causing the dependency engine to wait for a while;
// 2) to ensure that certain connection failures correctly trigger
// complete agent removal. (It's not safe to let any agent other
// than the machine mess around with SetCanUninstall).
connectFilter := func(err error) error {
cause := errors.Cause(err)
if cause == apicaller.ErrConnectImpossible {
err2 := coreagent.SetCanUninstall(config.Agent)
if err2 != nil {
return errors.Trace(err2)
}
return worker.ErrTerminateAgent
} else if cause == apicaller.ErrChangedPassword {
return dependency.ErrBounce
}
return err
}
return dependency.Manifolds{
// The agent manifold references the enclosing agent, and is the
// foundation stone on which most other manifolds ultimately depend.
agentName: agent.Manifold(config.Agent),
// The termination worker returns ErrTerminateAgent if a
// termination signal is received by the process it's running
// in. It has no inputs and its only output is the error it
// returns. It depends on the uninstall file having been
// written *by the manual provider* at install time; it would
// be Very Wrong Indeed to use SetCanUninstall in conjunction
// with this code.
terminationName: terminationworker.Manifold(),
// The stateconfigwatcher manifold watches the machine agent's
// configuration and reports if state serving info is
// present. It will bounce itself if state serving info is
// added or removed. It is intended as a dependency just for
// the state manifold.
stateConfigWatcherName: stateconfigwatcher.Manifold(stateconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
// The state manifold creates a *state.State and makes it
// available to other manifolds. It pings the mongodb session
// regularly and will die if pings fail.
stateName: workerstate.Manifold(workerstate.ManifoldConfig{
AgentName: agentName,
StateConfigWatcherName: stateConfigWatcherName,
OpenState: config.OpenState,
}),
// The stateworkers manifold starts workers which rely on a
// *state.State but which haven't been converted to run
// directly under the dependency engine yet. This manifold
// will be removed once all such workers have been converted;
// until then, the workers are expected to handle their own
// checks for upgrades etc, rather than blocking this whole
// worker on upgrade completion.
stateWorkersName: StateWorkersManifold(StateWorkersConfig{
StateName: stateName,
StartStateWorkers: config.StartStateWorkers,
}),
// The api-config-watcher manifold monitors the API server
// addresses in the agent config and bounces when they
// change. It's required as part of model migrations.
apiConfigWatcherName: apiconfigwatcher.Manifold(apiconfigwatcher.ManifoldConfig{
AgentName: agentName,
AgentConfigChanged: config.AgentConfigChanged,
}),
// The api caller is a thin concurrent wrapper around a connection
// to some API server. It's used by many other manifolds, which all
// select their own desired facades. It will be interesting to see
// how this works when we consolidate the agents; might be best to
// handle the auth changes server-side..?
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
APIConfigWatcherName: apiConfigWatcherName,
APIOpen: apicaller.APIOpen,
NewConnection: apicaller.ScaryConnect,
Filter: connectFilter,
}),
// The upgrade steps gate is used to coordinate workers which
// shouldn't do anything until the upgrade-steps worker has
// finished running any required upgrade steps. The flag of
// similar name is used to implement the isFullyUpgraded func
// that keeps upgrade concerns out of unrelated manifolds.
upgradeStepsGateName: gate.ManifoldEx(config.UpgradeStepsLock),
upgradeStepsFlagName: gate.FlagManifold(gate.FlagManifoldConfig{
GateName: upgradeStepsGateName,
NewWorker: gate.NewFlagWorker,
}),
// The upgrade check gate is used to coordinate workers which
// shouldn't do anything until the upgrader worker has
// completed its first check for a new tools version to
// upgrade to. The flag of similar name is used to implement
// the isFullyUpgraded func that keeps upgrade concerns out of
// unrelated manifolds.
upgradeCheckGateName: gate.ManifoldEx(config.UpgradeCheckLock),
upgradeCheckFlagName: gate.FlagManifold(gate.FlagManifoldConfig{
GateName: upgradeCheckGateName,
NewWorker: gate.NewFlagWorker,
}),
// The upgrader is a leaf worker that returns a specific error
// type recognised by the machine agent, causing other workers
// to be stopped and the agent to be restarted running the new
// tools. We should only need one of these in a consolidated
// agent, but we'll need to be careful about behavioural
// differences, and interactions with the upgrade-steps
// worker.
upgraderName: upgrader.Manifold(upgrader.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
UpgradeCheckGateName: upgradeCheckGateName,
PreviousAgentVersion: config.PreviousAgentVersion,
}),
// The upgradesteps worker runs soon after the machine agent
// starts and runs any steps required to upgrade to the
// running jujud version. Once upgrade steps have run, the
// upgradesteps gate is unlocked and the worker exits.
upgradeStepsName: upgradesteps.Manifold(upgradesteps.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
OpenStateForUpgrade: config.OpenStateForUpgrade,
PreUpgradeSteps: config.PreUpgradeSteps,
}),
// The migration minion handles the agent side aspects of model migrations.
migrationFortressName: ifFullyUpgraded(fortress.Manifold()),
migrationMinionName: ifFullyUpgraded(migrationminion.Manifold(migrationminion.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
FortressName: migrationFortressName,
NewFacade: migrationminion.NewFacade,
NewWorker: migrationminion.NewWorker,
})),
// The serving-info-setter manifold sets grabs the state
// serving info from the API connection and writes it to the
// agent config.
servingInfoSetterName: ifFullyUpgraded(ServingInfoSetterManifold(ServingInfoSetterConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The apiworkers manifold starts workers which rely on the
// machine agent's API connection but have not been converted
// to work directly under the dependency engine. It waits for
// upgrades to be finished before starting these workers.
apiWorkersName: ifFullyUpgraded(APIWorkersManifold(APIWorkersConfig{
APICallerName: apiCallerName,
StartAPIWorkers: config.StartAPIWorkers,
})),
// The reboot manifold manages a worker which will reboot the
// machine when requested. It needs an API connection and
// waits for upgrades to be complete.
rebootName: ifFullyUpgraded(reboot.Manifold(reboot.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The logging config updater is a leaf worker that indirectly
// controls the messages sent via the log sender or rsyslog,
// according to changes in environment config. We should only need
// one of these in a consolidated agent.
loggingConfigUpdaterName: ifFullyUpgraded(logger.Manifold(logger.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The diskmanager worker periodically lists block devices on the
// machine it runs on. This worker will be run on all Juju-managed
// machines (one per machine agent).
diskManagerName: ifFullyUpgraded(diskmanager.Manifold(diskmanager.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The proxy config updater is a leaf worker that sets http/https/apt/etc
// proxy settings.
proxyConfigUpdater: ifFullyUpgraded(proxyupdater.Manifold(proxyupdater.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The api address updater is a leaf worker that rewrites agent config
// as the state server addresses change. We should only need one of
// these in a consolidated agent.
apiAddressUpdaterName: ifFullyUpgraded(apiaddressupdater.Manifold(apiaddressupdater.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The machiner Worker will wait for the identified machine to become
// Dying and make it Dead; or until the machine becomes Dead by other
// means.
machinerName: ifFullyUpgraded(machiner.Manifold(machiner.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The log sender is a leaf worker that sends log messages to some
// API server, when configured so to do. We should only need one of
// these in a consolidated agent.
//
// NOTE: the LogSource will buffer a large number of messages as an upgrade
// runs; it currently seems better to fill the buffer and send when stable,
// optimising for stable controller upgrades rather than up-to-the-moment
// observable normal-machine upgrades.
logSenderName: ifFullyUpgraded(logsender.Manifold(logsender.ManifoldConfig{
APICallerName: apiCallerName,
LogSource: config.LogSource,
})),
// The deployer worker is responsible for deploying and recalling unit
// agents, according to changes in a set of state units; and for the
// final removal of its agents' units from state when they are no
// longer needed.
deployerName: ifFullyUpgraded(deployer.Manifold(deployer.ManifoldConfig{
NewDeployContext: config.NewDeployContext,
AgentName: agentName,
APICallerName: apiCallerName,
})),
authenticationWorkerName: ifFullyUpgraded(authenticationworker.Manifold(authenticationworker.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
// The storageProvisioner worker manages provisioning
// (deprovisioning), and attachment (detachment) of first-class
// volumes and filesystems.
storageProvisionerName: ifFullyUpgraded(storageprovisioner.MachineManifold(storageprovisioner.MachineManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
Clock: config.Clock,
})),
resumerName: ifFullyUpgraded(resumer.Manifold(resumer.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
identityFileWriterName: ifFullyUpgraded(identityfilewriter.Manifold(identityfilewriter.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
toolsVersionCheckerName: ifFullyUpgraded(toolsversionchecker.Manifold(toolsversionchecker.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
})),
machineActionName: ifFullyUpgraded(machineactions.Manifold(machineactions.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
NewFacade: machineactions.NewFacade,
NewWorker: machineactions.NewMachineActionsWorker,
})),
hostKeyReporterName: ifFullyUpgraded(hostkeyreporter.Manifold(hostkeyreporter.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
RootDir: config.RootDir,
NewFacade: hostkeyreporter.NewFacade,
NewWorker: hostkeyreporter.NewWorker,
})),
}
}
// Manifolds returns a set of co-configured manifolds covering the
// various responsibilities of a machine agent.
//
// Thou Shalt Not Use String Literals In This Function. Or Else.
func Manifolds(config ManifoldsConfig) dependency.Manifolds {
return dependency.Manifolds{
// The agent manifold references the enclosing agent, and is the
// foundation stone on which most other manifolds ultimately depend.
agentName: agent.Manifold(config.Agent),
// The termination worker returns ErrTerminateAgent if a
// termination signal is received by the process it's running
// in. It has no inputs and its only output is the error it
// returns.
terminationName: terminationworker.Manifold(),
// The api caller is a thin concurrent wrapper around a connection
// to some API server. It's used by many other manifolds, which all
// select their own desired facades. It will be interesting to see
// how this works when we consolidate the agents; might be best to
// handle the auth changes server-side..?
apiCallerName: apicaller.Manifold(apicaller.ManifoldConfig{
AgentName: agentName,
}),
// The upgrade steps gate is used to coordinate workers which
// shouldn't do anything until the upgrade-steps worker has
// finished running any required upgrade steps.
upgradeStepsGateName: gate.ManifoldEx(config.UpgradeStepsLock),
// The upgrade check gate is used to coordinate workers which
// shouldn't do anything until the upgrader worker has
// completed it's first check for a new tools version to
// upgrade to.
upgradeCheckGateName: gate.ManifoldEx(config.UpgradeCheckLock),
// The upgrader is a leaf worker that returns a specific error
// type recognised by the machine agent, causing other workers
// to be stopped and the agent to be restarted running the new
// tools. We should only need one of these in a consolidated
// agent, but we'll need to be careful about behavioural
// differences, and interactions with the upgrade-steps
// worker.
upgraderName: upgrader.Manifold(upgrader.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
UpgradeCheckGateName: upgradeCheckGateName,
PreviousAgentVersion: config.PreviousAgentVersion,
}),
// The upgradesteps worker runs soon after the machine agent
// starts and runs any steps required to upgrade to the
// running jujud version. Once upgrade steps have run, the
// upgradesteps gate is unlocked and the worker exits.
upgradeStepsName: upgradesteps.Manifold(upgradesteps.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeStepsGateName: upgradeStepsGateName,
OpenStateForUpgrade: config.OpenStateForUpgrade,
PreUpgradeSteps: config.PreUpgradeSteps,
}),
// The uninstaller manifold checks if the machine is dead. If
// it is it writes the agent uninstall file and returns
// ErrTerminateAgent which causes the agent to remove itself.
uninstallerName: uninstallerManifold(uninstallerManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
WriteUninstallFile: config.WriteUninstallFile,
}),
// The serving-info-setter manifold sets grabs the state
// serving info from the API connection and writes it to the
// agent config.
servingInfoSetterName: ServingInfoSetterManifold(ServingInfoSetterConfig{
AgentName: agentName,
APICallerName: apiCallerName,
}),
// The upgradewaiter manifold aggregates the
// upgrade-steps-gate and upgrade-check-gate manifolds into
// one boolean output. It makes it easy to create manifolds
// which must only run after these upgrade events have
// occured.
upgradeWaiterName: upgradewaiter.Manifold(upgradewaiter.ManifoldConfig{
UpgradeStepsWaiterName: upgradeStepsGateName,
UpgradeCheckWaiterName: upgradeCheckGateName,
}),
// The apiworkers manifold starts workers which rely on the
// machine agent's API connection but have not been converted
// to work directly under the dependency engine. It waits for
// upgrades to be finished before starting these workers.
apiWorkersName: APIWorkersManifold(APIWorkersConfig{
APICallerName: apiCallerName,
UpgradeWaiterName: upgradeWaiterName,
StartAPIWorkers: config.StartAPIWorkers,
}),
// The reboot manifold manages a worker which will reboot the
// machine when requested. It needs an API connection and
// waits for upgrades to be complete.
rebootName: reboot.Manifold(reboot.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeWaiterName: upgradeWaiterName,
}),
// The logging config updater is a leaf worker that indirectly
// controls the messages sent via the log sender or rsyslog,
// according to changes in environment config. We should only need
// one of these in a consolidated agent.
loggingConfigUpdaterName: logger.Manifold(logger.ManifoldConfig{
AgentName: agentName,
APICallerName: apiCallerName,
UpgradeWaiterName: upgradeWaiterName,
}),
}
}