func (self *UpdateRegionCommand) Execute(c *cc.Controller) (cc.Result, error) {
if len(self.Nodes) == 0 {
return nil, nil
}
// 更新Cluster拓扑
cs := c.ClusterState
cs.UpdateRegionNodes(self.Region, self.Nodes)
// 首先更新迁移任务状态，以便发现故障时，在处理故障之前就暂停迁移任务
cluster := cs.GetClusterSnapshot()
if cluster != nil {
mm := c.MigrateManager
mm.HandleNodeStateChange(cluster)
}
for _, ns := range cs.AllNodeStates() {
node := ns.Node()
// Slave auto enable read ?
if !node.IsMaster() && !node.Fail && !node.Readable && node.MasterLinkStatus == "up" {
if meta.GetAppConfig().AutoEnableSlaveRead {
redis.EnableRead(node.Addr(), node.Id)
}
}
// Master auto enable write ?
if node.IsMaster() && !node.Fail && !node.Writable {
if meta.GetAppConfig().AutoEnableMasterWrite {
redis.EnableWrite(node.Addr(), node.Id)
}
}
// Fix chained replication: slave's parent is slave.
if meta.LocalRegion() == self.Region && !node.IsMaster() {
parent := cs.FindNode(node.ParentId)
// Parent is not master?
if parent != nil && !parent.IsMaster() {
grandpa := cs.FindNode(parent.ParentId)
if grandpa != nil {
_, err := redis.ClusterReplicate(node.Addr(), grandpa.Id)
if err == nil {
log.Warningf(node.Addr(), "Fix chained replication, (%s->%s->%s)=>(%s->%s)",
node, parent, grandpa, node, grandpa)
}
} else {
log.Warningf(node.Addr(), "Found chained replication, (%s->%s->nil), cannot fix.",
node, parent)
}
}
}
// 更新Region内Node的状态机
ns.AdvanceFSM(cs, state.CMD_NONE)
}
return nil, nil
}
func Migrate(addr, toIp string, toPort int, key string, timeout int) (string, error) {
inner := func(addr, toIp string, toPort int, key string, timeout int) (string, error) {
conn, err := dial(addr)
if err != nil {
return "", ErrConnFailed
}
defer conn.Close()
resp, err := redis.String(conn.Do("migrate", toIp, toPort, key, 0, timeout))
if err != nil && strings.Contains(err.Error(), "BUSYKEY") {
log.Warningf("Migrate", "Found BUSYKEY '%s', will overwrite it.", key)
resp, err = redis.String(conn.Do("migrate", toIp, toPort, key, 0, timeout, "replace"))
}
if err != nil {
return "", err
}
return resp, nil
}
retry := NUM_RETRY
var err error
var resp string
for retry > 0 {
resp, err = inner(addr, toIp, toPort, key, timeout)
if err == nil {
return resp, nil
}
retry--
}
return "", err
}
func (cs *ClusterState) UpdateRegionNodes(region string, nodes []*topo.Node) {
cs.version++
now := time.Now()
log.Verbosef("CLUSTER", "Update region %s %d nodes", region, len(nodes))
// 添加不存在的节点，版本号+1
for _, n := range nodes {
if n.Region != region {
continue
}
nodeState := cs.nodeStates[n.Id]
if nodeState == nil {
nodeState = NewNodeState(n, cs.version)
cs.nodeStates[n.Id] = nodeState
} else {
nodeState.version = cs.version
if nodeState.node.Fail != n.Fail {
log.Eventf(n.Addr(), "Fail state changed, %v -> %v", nodeState.node.Fail, n.Fail)
}
if nodeState.node.Readable != n.Readable {
log.Eventf(n.Addr(), "Readable state changed, %v -> %v", nodeState.node.Readable, n.Readable)
}
if nodeState.node.Writable != n.Writable {
log.Eventf(n.Addr(), "Writable state changed, %v -> %v", nodeState.node.Writable, n.Writable)
}
nodeState.node = n
}
nodeState.updateTime = now
}
// 删除已经下线的节点
for id, n := range cs.nodeStates {
if n.node.Region != region {
continue
}
nodeState := cs.nodeStates[id]
if nodeState.version != cs.version {
log.Warningf("CLUSTER", "Delete node %s", nodeState.node)
delete(cs.nodeStates, id)
}
}
// NB：低效？
cs.BuildClusterSnapshot()
}
// 似乎，只有同时进行Forget和Reset才有意义，否则都是一个不一致的状态
func (self *ForgetAndResetNodeCommand) Execute(c *cc.Controller) (cc.Result, error) {
cs := c.ClusterState
target := cs.FindNode(self.NodeId)
if target == nil {
return nil, ErrNodeNotExist
}
if !target.Free == false {
return nil, ErrNodeIsFree
}
if len(target.Ranges) > 0 {
return nil, ErrNodeNotEmpty
}
var err error
forgetCount := 0
allForgetDone := true
// 1. 所有节点发送Forget
for _, ns := range cs.AllNodeStates() {
if ns.Id() == target.Id {
continue
}
node := ns.Node()
_, err = redis.ClusterForget(ns.Addr(), target.Id)
if !node.Fail && err != nil && !strings.HasPrefix(err.Error(), "ERR Unknown node") {
allForgetDone = false
log.Warningf(target.Addr(), "Forget node %s(%s) failed, %v", ns.Addr(), ns.Id(), err)
continue
} else if !node.Fail && err != nil {
//try again
for try := redis.NUM_RETRY; try >= 0; try-- {
_, err = redis.ClusterForget(ns.Addr(), target.Id)
if err == nil {
break
}
}
//execute failed after retry
if err != nil {
allForgetDone = false
log.Warningf(target.Addr(), "Forget node %s(%s) failed after retry, %v", ns.Addr(), ns.Id(), err)
continue
}
}
log.Eventf(target.Addr(), "Forget by %s(%s).", ns.Addr(), ns.Id())
forgetCount++
}
if !allForgetDone {
return nil, fmt.Errorf("Not all forget done, only (%d/%d) success",
forgetCount, len(cs.AllNodeStates())-1)
}
// 2. 重置
if !target.Fail {
_, err = redis.ClusterReset(target.Addr(), false)
if err != nil {
return nil, fmt.Errorf("Reset node %s(%s) failed, %v", target.Id, target.Addr(), err)
}
log.Eventf(target.Addr(), "Reset.")
}
// remove seed in leader contrller
meta.RemoveSeed(target.Addr())
return nil, nil
}
func (t *MigrateTask) Run() {
if t.CurrentState() == StateNew {
t.SetState(StateRunning)
}
if t.CurrentState() == StateCancelling {
t.SetState(StateCancelled)
return
}
prev_key := ""
timeout_cnt := 0
for i, r := range t.ranges {
if r.Left < 0 {
r.Left = 0
}
if r.Right > 16383 {
r.Right = 16383
}
t.currRangeIndex = i
t.currSlot = r.Left
t.totalKeysInSlot = 0
for t.currSlot <= r.Right {
t.streamPub(true)
// 尽量在迁移完一个完整Slot或遇到错误时，再进行状态的转换
if t.CurrentState() == StateCancelling {
t.SetState(StateCancelled)
t.streamPub(false)
return
}
// 暂停，sleep一会继续检查
if t.CurrentState() == StatePausing {
t.SetState(StatePaused)
}
if t.CurrentState() == StatePaused {
time.Sleep(100 * time.Millisecond)
continue
}
// 正常运行
app := meta.GetAppConfig()
nkeys, err, key := t.migrateSlot(t.currSlot, app.MigrateKeysEachTime)
t.totalKeysInSlot += nkeys
// Check remains again
seed := t.SourceNode()
remains, err2 := redis.CountKeysInSlot(seed.Addr(), t.currSlot)
if err2 != nil {
remains = -1
}
if err != nil || remains > 0 {
log.Warningf(t.TaskName(),
"Migrate slot %d error, %d keys done, total %d keys, remains %d keys, %v",
t.currSlot, nkeys, t.totalKeysInSlot, remains, err)
if err != nil && strings.HasPrefix(err.Error(), "READONLY") {
log.Warningf(t.TaskName(), "Migrating across slaves nodes. "+
"Maybe a manual failover just happened, "+
"if cluster marks down after this point, "+
"we need recover it by ourself using cli commands.")
t.SetState(StateCancelled)
goto quit
} else if err != nil && strings.HasPrefix(err.Error(), "CLUSTERDOWN") {
log.Warningf(t.TaskName(), "The cluster is down, please check it yourself, migrating task cancelled.")
t.SetState(StateCancelled)
goto quit
} else if err != nil && strings.HasPrefix(err.Error(), "IOERR") {
log.Warningf(t.TaskName(), "Migrating key:%s timeout", key)
if timeout_cnt > 10 {
log.Warningf(t.TaskName(), "Migrating key:%s timeout too frequently, task cancelled")
t.SetState(StateCancelled)
goto quit
}
if prev_key == key {
timeout_cnt++
} else {
timeout_cnt = 0
prev_key = key
}
}
time.Sleep(500 * time.Millisecond)
} else {
log.Infof(t.TaskName(), "Migrate slot %d done, %d keys done, total %d keys, remains %d keys",
t.currSlot, nkeys, t.totalKeysInSlot, remains)
t.currSlot++
t.totalKeysInSlot = 0
}
}
}
t.currSlot--
t.SetState(StateDone)
quit:
t.streamPub(false)
}
/// 迁移slot过程:
/// 1. 标记Target分片Master为IMPORTING
/// 2. 标记所有Source分片节点为MIGRATING
/// 3. 从Source分片Master取keys迁移，直到空，数据迁移完成
/// 4. 设置Target的Slave的slot归属到Target
/// 5. 设置Target的Master的slot归属到Target
/// 6. 设置Source所有节点的slot归属到Target
/// 命令:
/// 1. <Target Master> setslot $slot IMPORTING $sourceId
/// 2. <Source Slaves> setslot $slot MIGRATING $targetId
/// 3. <Source Master> setslot $slot MIGRATING $targetId
/// ... migrating all keys
/// 4. <Target Slaves> setslot $slot node $targetId
/// 5. <Target Master> setslot $slot node $targetId
/// 6. <Source Slaves> setslot $slot node $targetId
/// 7. <Source Master> setslot $slot node $targetId
func (t *MigrateTask) migrateSlot(slot int, keysPer int) (int, error, string) {
rs := t.SourceReplicaSet()
sourceNode := t.SourceNode()
targetNode := t.TargetNode()
err := redis.SetSlot(targetNode.Addr(), slot, redis.SLOT_IMPORTING, sourceNode.Id)
if err != nil {
if strings.HasPrefix(err.Error(), "ERR I'm already the owner of hash slot") {
log.Warningf(t.TaskName(), "%s already the owner of hash slot %d",
targetNode.Id[:6], slot)
// 逻辑到此，说明Target已经包含该slot，但是Source处于Migrating状态
// 迁移实际已经完成，需要清理Source的Migrating状态
srs := t.SourceReplicaSet()
err = SetSlotToNode(srs, slot, targetNode.Id)
if err != nil {
return 0, err, ""
}
err = SetSlotStable(srs, slot)
if err != nil {
return 0, err, ""
}
trs := t.TargetReplicaSet()
err = SetSlotToNode(trs, slot, targetNode.Id)
if err != nil {
return 0, err, ""
}
err = SetSlotStable(trs, slot)
return 0, err, ""
}
return 0, err, ""
}
// 需要将Source分片的所有节点标记为MIGRATING，最大限度避免从地域的读造成的数据不一致
for _, node := range rs.AllNodes() {
err := redis.SetSlot(node.Addr(), slot, redis.SLOT_MIGRATING, targetNode.Id)
if err != nil {
if strings.HasPrefix(err.Error(), "ERR I'm not the owner of hash slot") {
log.Warningf(t.TaskName(), "%s is not the owner of hash slot %d",
sourceNode.Id, slot)
srs := t.SourceReplicaSet()
err = SetSlotStable(srs, slot)
if err != nil {
log.Warningf(t.TaskName(), "Failed to clean MIGRATING state of source server.")
return 0, err, ""
}
trs := t.TargetReplicaSet()
err = SetSlotStable(trs, slot)
if err != nil {
log.Warningf(t.TaskName(), "Failed to clean MIGRATING state of target server.")
return 0, err, ""
}
return 0, fmt.Errorf("mig: %s is not the owner of hash slot %d", sourceNode.Id, slot), ""
}
return 0, err, ""
}
}
nkeys := 0
app := meta.GetAppConfig()
for {
keys, err := redis.GetKeysInSlot(sourceNode.Addr(), slot, keysPer)
if err != nil {
return nkeys, err, ""
}
for _, key := range keys {
_, err := redis.Migrate(sourceNode.Addr(), targetNode.Ip, targetNode.Port, key, app.MigrateTimeout)
if err != nil {
return nkeys, err, key
}
nkeys++
}
if len(keys) == 0 {
// 迁移完成，需要等SourceSlaves同步(DEL)完成，即SourceSlaves节点中该slot内已无key
slaveSyncDone := true
srs := t.SourceReplicaSet()
for _, node := range srs.AllNodes() {
nkeys, err := redis.CountKeysInSlot(node.Addr(), slot)
if err != nil {
return nkeys, err, ""
}
if nkeys > 0 {
slaveSyncDone = false
}
}
if !slaveSyncDone {
// FIXME
// master migrate done, slave still have some keys in slot, setslot will ensure slave clear the data
log.Info(t.TaskName(), "source node not empty, setslot will clear")
//return nkeys, fmt.Errorf("mig: source nodes not all empty, will retry."), ""
}
// 设置slot归属到新节点，该操作自动清理IMPORTING和MIGRATING状态
// 如果设置的是Source节点，设置slot归属时，Redis会确保该slot中已无剩余的key
trs := t.TargetReplicaSet()
// 优先设置从节点，保证当主的数据分布还未广播到从节点时主挂掉，slot信息也不会丢失
for _, node := range trs.Slaves {
if node.Fail {
continue
}
err = redis.SetSlot(node.Addr(), slot, redis.SLOT_NODE, targetNode.Id)
if err != nil {
return nkeys, err, ""
}
}
// 该操作增加Epoch并广播出去
err = redis.SetSlot(trs.Master.Addr(), slot, redis.SLOT_NODE, targetNode.Id)
if err != nil {
return nkeys, err, ""
}
// 更新节点上slot的归属
for _, rs := range t.cluster.ReplicaSets() {
if rs.Master.IsStandbyMaster() {
continue
}
err = SetSlotToNode(rs, slot, targetNode.Id)
if err != nil {
return nkeys, err, ""
}
}
break
}
}
return nkeys, nil, ""
}
func (cs *ClusterState) RunFailoverTask(oldMasterId, newMasterId string) {
new := cs.FindNodeState(newMasterId)
old := cs.FindNodeState(oldMasterId)
if old == nil {
log.Warningf(oldMasterId, "Can't run failover task, the old dead master lost")
return
}
if new == nil {
log.Warningf(oldMasterId, "Can't run failover task, new master lost (%s)", newMasterId)
old.AdvanceFSM(cs, CMD_FAILOVER_END_SIGNAL)
return
}
// 通过新主广播消息
redis.DisableRead(new.Addr(), old.Id())
redis.DisableWrite(new.Addr(), old.Id())
c := make(chan error, 1)
go func() {
//choose failover force or takeover in case of arbiter
cluster := cs.cluster
rs := cluster.FindReplicaSetByNode(old.Id())
if cluster.HasArbiter() || cluster.IsClusterDown() {
//use failover takeover
c <- redis.SetAsMasterWaitSyncDone(new.Addr(), true, true, rs)
} else {
//use failover force
c <- redis.SetAsMasterWaitSyncDone(new.Addr(), true, false, rs)
}
}()
select {
case err := <-c:
if err != nil {
log.Eventf(old.Addr(), "Failover request done with error(%v).", err)
} else {
log.Eventf(old.Addr(), "Failover request done, new master %s(%s).", new.Id(), new.Addr())
}
case <-time.After(20 * time.Minute):
log.Eventf(old.Addr(), "Failover timedout, new master %s(%s)", new.Id(), new.Addr())
}
// 重新读取一次，因为可能已经更新了
roleChanged := false
node := cs.FindNode(newMasterId)
if node.IsMaster() {
roleChanged = true
} else {
for i := 0; i < 10; i++ {
info, err := redis.FetchInfo(node.Addr(), "Replication")
if err == nil && info.Get("role") == "master" {
roleChanged = true
break
}
log.Warningf(old.Addr(),
"Role of new master %s(%s) has not yet changed, will check 5 seconds later.",
new.Id(), new.Addr())
time.Sleep(5 * time.Second)
}
}
if roleChanged {
log.Eventf(old.Addr(), "New master %s(%s) role change success", node.Id, node.Addr())
// 处理迁移过程中的异常问题，将故障节点（旧主）的slots转移到新主上
oldNode := cs.FindNode(oldMasterId)
if oldNode != nil && oldNode.Fail && oldNode.IsMaster() && len(oldNode.Ranges) != 0 {
log.Warningf(old.Addr(),
"Some node carries slots info(%v) about the old master, waiting for MigrateManager to fix it.",
oldNode.Ranges)
} else {
log.Info(old.Addr(), "Good, no slot need to be fix after failover.")
}
} else {
log.Warningf(old.Addr(), "Failover failed, please check cluster state.")
log.Warningf(old.Addr(), "The dead master will goto OFFLINE state and then goto WAIT_FAILOVER_BEGIN state to try failover again.")
}
old.AdvanceFSM(cs, CMD_FAILOVER_END_SIGNAL)
// 打开新主的写入，因为给slave加Write没有效果
// 所以即便Failover失败，也不会产生错误
redis.EnableWrite(new.Addr(), new.Id())
}
func init() {
RedisNodeStateModel.AddState(RunningState)
RedisNodeStateModel.AddState(WaitFailoverBeginState)
RedisNodeStateModel.AddState(WaitFailoverEndState)
RedisNodeStateModel.AddState(OfflineState)
/// State: (WaitFailoverRunning)
// (a0) Running封禁了，进入Offline状态
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateRunning,
To: StateOffline,
Input: Input{F, F, ANY, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (a1) 节点挂了，且未封禁
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateRunning,
To: StateWaitFailoverBegin,
Input: Input{T, ANY, FAIL, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (a2) 节点挂了，且未封禁
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateRunning,
To: StateWaitFailoverBegin,
Input: Input{ANY, T, FAIL, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (a3) 节点挂了，从，且未封禁，且可以自动进行Failover
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateRunning,
To: StateWaitFailoverEnd,
Input: Input{T, ANY, FAIL, S, ANY},
Priority: 1,
Constraint: SlaveAutoFailoverConstraint,
Apply: SlaveFailoverHandler,
})
// (a4) 节点挂了，主，未封禁，且可以自动进行Failover
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateRunning,
To: StateWaitFailoverEnd,
Input: Input{T, T, FAIL, M, ANY},
Priority: 1,
Constraint: MasterAutoFailoverConstraint,
Apply: MasterFailoverHandler,
})
/// State: (WaitFailoverBegin)
// (b0) 节点恢复了
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverBegin,
To: StateRunning,
Input: Input{ANY, ANY, FINE, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (b10) 主节点，Autofailover或手动继续执行Failover
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverBegin,
To: StateWaitFailoverEnd,
Input: Input{ANY, ANY, FAIL, M, ANY},
Priority: 0,
Constraint: MasterAutoFailoverConstraint,
Apply: MasterFailoverHandler,
})
// (b11) 主节点，已经处理过了
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverBegin,
To: StateOffline,
Input: Input{ANY, ANY, FAIL, M, ANY},
Priority: 0,
Constraint: MasterGotoOfflineConstraint,
Apply: MasterGotoOfflineHandler,
})
// (b2) 从节点，AutoFailover或手动继续执行Failover
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverBegin,
To: StateWaitFailoverEnd,
Input: Input{ANY, ANY, FAIL, S, ANY},
Priority: 0,
Constraint: SlaveAutoFailoverConstraint,
Apply: SlaveFailoverHandler,
})
// (b3) 从节点，已经处于封禁状态，转到OFFLINE
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverBegin,
To: StateOffline,
Input: Input{F, F, FAIL, S, ANY},
Priority: 1,
Constraint: nil,
Apply: nil,
})
/// State: (WaitFailoverEnd)
// (c0) 等待Failover执行结束信号
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverEnd,
To: StateOffline,
Input: Input{ANY, ANY, ANY, ANY, CMD_FAILOVER_END_SIGNAL},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (c1) 从挂了，且已经封禁
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverEnd,
To: StateOffline,
Input: Input{F, F, FAIL, S, ANY},
Priority: 1,
Constraint: nil,
Apply: nil,
})
// (c2) 从在Failover过程中恢复了，结束FailoverEnd状态
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateWaitFailoverEnd,
To: StateOffline,
Input: Input{ANY, ANY, FINE, S, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
/// State: (Offline)
// (d0) 节点恢复读标记
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateOffline,
To: StateRunning,
Input: Input{T, ANY, ANY, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (d1) 节点恢复写标记
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateOffline,
To: StateRunning,
Input: Input{ANY, T, ANY, ANY, ANY},
Priority: 0,
Constraint: nil,
Apply: nil,
})
// (d2) 是主节，且挂了，需要进行Failover
RedisNodeStateModel.AddTransition(&fsm.Transition{
From: StateOffline,
To: StateWaitFailoverBegin,
Input: Input{F, F, FAIL, M, ANY},
Priority: 0,
Constraint: func(i interface{}) bool {
// Master故障，进行Failover之后，故障的节点仍然被标记为master。
// 所以我们需要判断这个Master是否已经被处理过了。
// 判断依据是节点处于FAIL状态，且没有slots
ctx := i.(StateContext)
ns := ctx.NodeState
if ns.node.IsStandbyMaster() {
return false
}
log.Warningf(ns.Addr(), "Found offline non standby master, will try to failover(%v,%v).",
ns.Role(), ns.Ranges())
return true
},
Apply: nil,
})
}
ctx := i.(StateContext)
ns := ctx.NodeState
record := &meta.FailoverRecord{
AppName: meta.AppName(),
NodeId: ns.Id(),
NodeAddr: ns.Addr(),
Timestamp: time.Now(),
Region: ns.Region(),
Tag: ns.Tag(),
Role: ns.Role(),
Ranges: ns.Ranges(),
}
err := meta.AddFailoverRecord(record)
if err != nil {
log.Warningf(ns.Addr(), "state: add failover record failed, %v", err)
}
},
OnLeave: func(i interface{}) {
log.Event(getNodeState(i).Addr(), "Leave WAIT_FAILOVER_END state")
ctx := i.(StateContext)
ns := ctx.NodeState
if ns.Role() == "master" {
err := meta.UnmarkFailoverDoing()
if err != nil {
log.Warningf(ns.Addr(), "state: unmark FAILOVER_DOING status failed, %v", err)
}
}
},
func (m *MigrateManager) HandleNodeStateChange(cluster *topo.Cluster) {
// 如果存在迁移任务，先跳过，等结束后再处理
if len(m.tasks) > 0 {
goto done
}
// 处理主节点的迁移任务重建
for _, node := range cluster.AllNodes() {
if node.Fail {
continue
}
// Wait a while
if time.Now().Sub(m.lastTaskEndTime) < 5*time.Second {
continue
}
for id, slots := range node.Migrating {
// 根据slot生成ranges
ranges := []topo.Range{}
for _, slot := range slots {
// 如果是自己
if id == node.Id {
redis.SetSlot(node.Addr(), slot, redis.SLOT_STABLE, "")
} else {
ranges = append(ranges, topo.Range{Left: slot, Right: slot})
}
}
// Source
source := node
if !node.IsMaster() {
srs := cluster.FindReplicaSetByNode(node.Id)
if srs != nil {
source = srs.Master
}
}
// Target
rs := cluster.FindReplicaSetByNode(id)
if source.Fail || rs.Master.Fail {
continue
}
_, err := m.CreateTask(source.Id, rs.Master.Id, ranges, cluster)
if err != nil {
log.Warningf(node.Addr(), "Can not recover migrate task, %v", err)
} else {
log.Warningf(node.Addr(), "Will recover migrating task for node %s(%s) with MIGRATING info"+
", Task(Source:%s, Target:%s).", node.Id, node.Addr(), source.Addr(), rs.Master.Addr())
goto done
}
}
for id, slots := range node.Importing {
// 根据slot生成ranges
ranges := []topo.Range{}
for _, slot := range slots {
// 如果是自己
if id == node.Id {
redis.SetSlot(node.Addr(), slot, redis.SLOT_STABLE, "")
} else {
ranges = append(ranges, topo.Range{Left: slot, Right: slot})
}
}
// Target
target := node
if !node.IsMaster() {
trs := cluster.FindReplicaSetByNode(node.Id)
if trs != nil {
target = trs.Master
}
}
if target.IsStandbyMaster() {
s := cluster.FindNodeBySlot(ranges[0].Left)
if s != nil {
log.Warningf(node.Addr(), "Reset migrate task target to %s(%s)", s.Id, s.Addr())
target = s
}
}
// Source
rs := cluster.FindReplicaSetByNode(id)
if target.Fail || rs.Master.Fail {
continue
}
_, err := m.CreateTask(rs.Master.Id, target.Id, ranges, cluster)
if err != nil {
log.Warningf(node.Addr(), "Can not recover migrate task, %v", err)
} else {
log.Warningf(node.Addr(), "Will recover migrating task for node %s(%s) with IMPORTING info"+
", Task(Source:%s,Target:%s).", node.Id, node.Addr(), rs.Master.Addr(), target.Addr())
goto done
}
}
}
done:
for _, task := range m.tasks {
if task.CurrentState() != StateDone {
m.handleTaskChange(task, cluster)
}
}
}
// 更新任务状态机
func (m *MigrateManager) handleTaskChange(task *MigrateTask, cluster *topo.Cluster) error {
fromNode := cluster.FindNode(task.SourceNode().Id)
toNode := cluster.FindNode(task.TargetNode().Id)
tname := task.TaskName()
if fromNode == nil {
log.Infof(tname, "Source node %s(%s) not exist", fromNode.Addr(), fromNode.Id)
return ErrNodeNotFound
}
if toNode == nil {
log.Infof(tname, "Target node %s(%s) not exist", toNode.Addr(), toNode.Id)
return ErrNodeNotFound
}
// 角色变化说明该分片进行了主从切换
if !fromNode.IsMaster() || !toNode.IsMaster() {
log.Warningf(tname, "%s role change, cancel migration task %s\n", fromNode.Id[:6], task.TaskName())
task.SetState(StateCancelling)
return ErrSourceNodeFail
}
// 如果是源节点挂了，直接取消，等待主从切换之后重建任务
if fromNode.Fail {
log.Infof(tname, "Cancel migration task %s\n", task.TaskName())
task.SetState(StateCancelling)
return ErrSourceNodeFail
}
// 如果目标节点挂了，需要记录当前的ReplicaSet，观察等待主从切换
if toNode.Fail {
if task.CurrentState() == StateRunning {
task.SetState(StateTargetNodeFailure)
task.SetBackupReplicaSet(task.TargetReplicaSet())
return ErrTargetNodeFail
}
} else if task.CurrentState() != StateNew {
task.SetState(StateRunning)
task.SetBackupReplicaSet(nil)
}
// 如果目标节点已经进行了Failover(重新选主)，我们需要找到对应的新主
// 方法是从BackupReplicaSet里取一个从来查找
if toNode.IsStandbyMaster() {
brs := task.BackupReplicaSet()
if brs == nil {
task.SetState(StateCancelling)
log.Info(tname, "No backup replicaset found, controller maybe restarted after target master failure, can not do recovery.")
return ErrCanNotRecover
}
slaves := brs.Slaves
if len(slaves) == 0 {
task.SetState(StateCancelling)
log.Info(tname, "The dead target master has no slave, cannot do recovery.")
return ErrCanNotRecover
} else {
rs := cluster.FindReplicaSetByNode(slaves[0].Id)
if rs == nil {
task.SetState(StateCancelling)
log.Info(tname, "No replicaset for slave of dead target master found")
return ErrCanNotRecover
}
task.ReplaceTargetReplicaSet(rs)
log.Infof(tname, "Recover dead target node to %s(%s)",
rs.Master.Id, rs.Master.Addr())
}
}
return nil
}
