// Run implements the exec driver Driver interface
func (d *Driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (execdriver.ExitStatus, error) {
var (
term execdriver.Terminal
err error
inListen, outListen, errListen *npipe.PipeListener
)
// Make sure the client isn't asking for options which aren't supported
err = checkSupportedOptions(c)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
cu := &containerInit{
SystemType: "Container",
Name: c.ID,
IsDummy: dummyMode,
VolumePath: c.Rootfs,
IgnoreFlushesDuringBoot: c.FirstStart,
LayerFolderPath: c.LayerFolder,
}
for i := 0; i < len(c.LayerPaths); i++ {
cu.Layers = append(cu.Layers, layer{
ID: hcsshim.NewGUID(c.LayerPaths[i]).ToString(),
Path: c.LayerPaths[i],
})
}
// TODO Windows. At some point, when there is CLI on docker run to
// enable the IP Address of the container to be passed into docker run,
// the IP Address needs to be wired through to HCS in the JSON. It
// would be present in c.Network.Interface.IPAddress. See matching
// TODO in daemon\container_windows.go, function populateCommand.
if c.Network.Interface != nil {
var pbs []portBinding
// Enumerate through the port bindings specified by the user and convert
// them into the internal structure matching the JSON blob that can be
// understood by the HCS.
for i, v := range c.Network.Interface.PortBindings {
proto := strings.ToUpper(i.Proto())
if proto != "TCP" && proto != "UDP" {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid protocol %s", i.Proto())
}
if len(v) > 1 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support more than one host port in NAT settings")
}
for _, v2 := range v {
var (
iPort, ePort int
err error
)
if len(v2.HostIP) != 0 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support host IP addresses in NAT settings")
}
if ePort, err = strconv.Atoi(v2.HostPort); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid container port %s: %s", v2.HostPort, err)
}
if iPort, err = strconv.Atoi(i.Port()); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid internal port %s: %s", i.Port(), err)
}
if iPort < 0 || iPort > 65535 || ePort < 0 || ePort > 65535 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("specified NAT port is not in allowed range")
}
pbs = append(pbs,
portBinding{ExternalPort: ePort,
InternalPort: iPort,
Protocol: proto})
}
}
// TODO Windows: TP3 workaround. Allow the user to override the name of
// the Container NAT device through an environment variable. This will
// ultimately be a global daemon parameter on Windows, similar to -b
// for the name of the virtual switch (aka bridge).
cn := os.Getenv("DOCKER_CONTAINER_NAT")
if len(cn) == 0 {
cn = defaultContainerNAT
}
dev := device{
DeviceType: "Network",
Connection: &networkConnection{
NetworkName: c.Network.Interface.Bridge,
// TODO Windows: Fixme, next line. Needs HCS fix.
EnableNat: false,
Nat: natSettings{
Name: cn,
PortBindings: pbs,
},
},
}
if c.Network.Interface.MacAddress != "" {
windowsStyleMAC := strings.Replace(
c.Network.Interface.MacAddress, ":", "-", -1)
dev.Settings = networkSettings{
MacAddress: windowsStyleMAC,
}
}
cu.Devices = append(cu.Devices, dev)
} else {
logrus.Debugln("No network interface")
}
configurationb, err := json.Marshal(cu)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
configuration := string(configurationb)
err = hcsshim.CreateComputeSystem(c.ID, configuration)
if err != nil {
logrus.Debugln("Failed to create temporary container ", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Start the container
logrus.Debugln("Starting container ", c.ID)
err = hcsshim.StartComputeSystem(c.ID)
if err != nil {
logrus.Errorf("Failed to start compute system: %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer func() {
// Stop the container
if terminateMode {
logrus.Debugf("Terminating container %s", c.ID)
if err := hcsshim.TerminateComputeSystem(c.ID); err != nil {
// IMPORTANT: Don't fail if fails to change state. It could already
// have been stopped through kill().
// Otherwise, the docker daemon will hang in job wait()
logrus.Warnf("Ignoring error from TerminateComputeSystem %s", err)
}
} else {
logrus.Debugf("Shutting down container %s", c.ID)
if err := hcsshim.ShutdownComputeSystem(c.ID); err != nil {
// IMPORTANT: Don't fail if fails to change state. It could already
// have been stopped through kill().
// Otherwise, the docker daemon will hang in job wait()
logrus.Warnf("Ignoring error from ShutdownComputeSystem %s", err)
}
}
}()
// We use a different pipe name between real and dummy mode in the HCS
var serverPipeFormat, clientPipeFormat string
if dummyMode {
clientPipeFormat = `\\.\pipe\docker-run-%[1]s-%[2]s`
serverPipeFormat = clientPipeFormat
} else {
clientPipeFormat = `\\.\pipe\docker-run-%[2]s`
serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-run-%[2]s`
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: c.ProcessConfig.Tty,
WorkingDirectory: c.WorkingDir,
ConsoleSize: c.ProcessConfig.ConsoleSize,
}
// Configure the environment for the process
createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)
// Connect stdin
if pipes.Stdin != nil {
stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdin")
createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdin")
// Listen on the named pipe
inListen, err = npipe.Listen(stdInPipe)
if err != nil {
logrus.Errorf("stdin failed to listen on %s err=%s", stdInPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer inListen.Close()
// Launch a goroutine to do the accept. We do this so that we can
// cause an otherwise blocking goroutine to gracefully close when
// the caller (us) closes the listener
go stdinAccept(inListen, stdInPipe, pipes.Stdin)
}
// Connect stdout
stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdout")
createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdout")
outListen, err = npipe.Listen(stdOutPipe)
if err != nil {
logrus.Errorf("stdout failed to listen on %s err=%s", stdOutPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer outListen.Close()
go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)
// No stderr on TTY.
if !c.ProcessConfig.Tty {
// Connect stderr
stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stderr")
createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stderr")
errListen, err = npipe.Listen(stdErrPipe)
if err != nil {
logrus.Errorf("stderr failed to listen on %s err=%s", stdErrPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer errListen.Close()
go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
}
// This should get caught earlier, but just in case - validate that we
// have something to run
if c.ProcessConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Build the command line of the process
createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
for _, arg := range c.ProcessConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + arg
}
logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)
// Start the command running in the container.
var pid uint32
pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
//Save the PID as we'll need this in Kill()
logrus.Debugf("PID %d", pid)
c.ContainerPid = int(pid)
if c.ProcessConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
c.ProcessConfig.Terminal = term
// Maintain our list of active containers. We'll need this later for exec
// and other commands.
d.Lock()
d.activeContainers[c.ID] = &activeContainer{
command: c,
}
d.Unlock()
// Invoke the start callback
if startCallback != nil {
startCallback(&c.ProcessConfig, int(pid))
}
var exitCode int32
exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid)
if err != nil {
logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}
// Run implements the exec driver Driver interface
func (d *Driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, hooks execdriver.Hooks) (execdriver.ExitStatus, error) {
var (
term execdriver.Terminal
err error
)
cu := &containerInit{
SystemType: "Container",
Name: c.ID,
Owner: defaultOwner,
IsDummy: dummyMode,
VolumePath: c.Rootfs,
IgnoreFlushesDuringBoot: c.FirstStart,
LayerFolderPath: c.LayerFolder,
ProcessorWeight: c.Resources.CPUShares,
HostName: c.Hostname,
}
cu.HvPartition = c.HvPartition
if cu.HvPartition {
cu.SandboxPath = filepath.Dir(c.LayerFolder)
} else {
cu.VolumePath = c.Rootfs
cu.LayerFolderPath = c.LayerFolder
}
for _, layerPath := range c.LayerPaths {
_, filename := filepath.Split(layerPath)
g, err := hcsshim.NameToGuid(filename)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
cu.Layers = append(cu.Layers, layer{
ID: g.ToString(),
Path: layerPath,
})
}
// Add the mounts (volumes, bind mounts etc) to the structure
mds := make([]mappedDir, len(c.Mounts))
for i, mount := range c.Mounts {
mds[i] = mappedDir{
HostPath: mount.Source,
ContainerPath: mount.Destination,
ReadOnly: !mount.Writable}
}
cu.MappedDirectories = mds
// TODO Windows. At some point, when there is CLI on docker run to
// enable the IP Address of the container to be passed into docker run,
// the IP Address needs to be wired through to HCS in the JSON. It
// would be present in c.Network.Interface.IPAddress. See matching
// TODO in daemon\container_windows.go, function populateCommand.
if c.Network.Interface != nil {
var pbs []portBinding
// Enumerate through the port bindings specified by the user and convert
// them into the internal structure matching the JSON blob that can be
// understood by the HCS.
for i, v := range c.Network.Interface.PortBindings {
proto := strings.ToUpper(i.Proto())
if proto != "TCP" && proto != "UDP" {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid protocol %s", i.Proto())
}
if len(v) > 1 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support more than one host port in NAT settings")
}
for _, v2 := range v {
var (
iPort, ePort int
err error
)
if len(v2.HostIP) != 0 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support host IP addresses in NAT settings")
}
if ePort, err = strconv.Atoi(v2.HostPort); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid container port %s: %s", v2.HostPort, err)
}
if iPort, err = strconv.Atoi(i.Port()); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid internal port %s: %s", i.Port(), err)
}
if iPort < 0 || iPort > 65535 || ePort < 0 || ePort > 65535 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("specified NAT port is not in allowed range")
}
pbs = append(pbs,
portBinding{ExternalPort: ePort,
InternalPort: iPort,
Protocol: proto})
}
}
// TODO Windows: TP3 workaround. Allow the user to override the name of
// the Container NAT device through an environment variable. This will
// ultimately be a global daemon parameter on Windows, similar to -b
// for the name of the virtual switch (aka bridge).
cn := os.Getenv("DOCKER_CONTAINER_NAT")
if len(cn) == 0 {
cn = defaultContainerNAT
}
dev := device{
DeviceType: "Network",
Connection: &networkConnection{
NetworkName: c.Network.Interface.Bridge,
// TODO Windows: Fixme, next line. Needs HCS fix.
EnableNat: false,
Nat: natSettings{
Name: cn,
PortBindings: pbs,
},
},
}
if c.Network.Interface.MacAddress != "" {
windowsStyleMAC := strings.Replace(
c.Network.Interface.MacAddress, ":", "-", -1)
dev.Settings = networkSettings{
MacAddress: windowsStyleMAC,
}
}
cu.Devices = append(cu.Devices, dev)
} else {
logrus.Debugln("No network interface")
}
configurationb, err := json.Marshal(cu)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
configuration := string(configurationb)
// TODO Windows TP5 timeframe. Remove when TP4 is no longer supported.
// The following a workaround for Windows TP4 which has a networking
// bug which fairly frequently returns an error. Back off and retry.
maxAttempts := 1
if TP4RetryHack {
maxAttempts = 5
}
i := 0
for i < maxAttempts {
i++
err = hcsshim.CreateComputeSystem(c.ID, configuration)
if err != nil {
if TP4RetryHack {
if !strings.Contains(err.Error(), `Win32 API call returned error r1=0x800401f3`) && // Invalid class string
!strings.Contains(err.Error(), `Win32 API call returned error r1=0x80070490`) && // Element not found
!strings.Contains(err.Error(), `Win32 API call returned error r1=0x80070002`) && // The system cannot find the file specified
!strings.Contains(err.Error(), `Win32 API call returned error r1=0x800704c6`) && // The network is not present or not started
!strings.Contains(err.Error(), `Win32 API call returned error r1=0x800700a1`) { // The specified path is invalid
logrus.Debugln("Failed to create temporary container ", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
logrus.Warnf("Invoking Windows TP4 retry hack (%d of %d)", i, maxAttempts-1)
time.Sleep(50 * time.Millisecond)
}
} else {
break
}
}
// Start the container
logrus.Debugln("Starting container ", c.ID)
err = hcsshim.StartComputeSystem(c.ID)
if err != nil {
logrus.Errorf("Failed to start compute system: %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer func() {
// Stop the container
if forceKill {
logrus.Debugf("Forcibly terminating container %s", c.ID)
if errno, err := hcsshim.TerminateComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
logrus.Warnf("Ignoring error from TerminateComputeSystem 0x%X %s", errno, err)
}
} else {
logrus.Debugf("Shutting down container %s", c.ID)
if errno, err := hcsshim.ShutdownComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
if errno != hcsshim.Win32SystemShutdownIsInProgress &&
errno != hcsshim.Win32SpecifiedPathInvalid &&
errno != hcsshim.Win32SystemCannotFindThePathSpecified {
logrus.Warnf("Ignoring error from ShutdownComputeSystem 0x%X %s", errno, err)
}
}
}
}()
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: c.ProcessConfig.Tty,
WorkingDirectory: c.WorkingDir,
ConsoleSize: c.ProcessConfig.ConsoleSize,
}
// Configure the environment for the process
createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)
createProcessParms.CommandLine, err = createCommandLine(&c.ProcessConfig, c.ArgsEscaped)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Start the command running in the container.
pid, stdin, stdout, stderr, _, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !c.ProcessConfig.Tty, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Now that the process has been launched, begin copying data to and from
// the named pipes for the std handles.
setupPipes(stdin, stdout, stderr, pipes)
//Save the PID as we'll need this in Kill()
logrus.Debugf("PID %d", pid)
c.ContainerPid = int(pid)
if c.ProcessConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
c.ProcessConfig.Terminal = term
// Maintain our list of active containers. We'll need this later for exec
// and other commands.
d.Lock()
d.activeContainers[c.ID] = &activeContainer{
command: c,
}
d.Unlock()
if hooks.Start != nil {
// A closed channel for OOM is returned here as it will be
// non-blocking and return the correct result when read.
chOOM := make(chan struct{})
close(chOOM)
hooks.Start(&c.ProcessConfig, int(pid), chOOM)
}
var (
exitCode int32
errno uint32
)
exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite)
if err != nil {
if errno != hcsshim.Win32PipeHasBeenEnded {
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): %s", err)
}
// Do NOT return err here as the container would have
// started, otherwise docker will deadlock. It's perfectly legitimate
// for WaitForProcessInComputeSystem to fail in situations such
// as the container being killed on another thread.
return execdriver.ExitStatus{ExitCode: hcsshim.WaitErrExecFailed}, nil
}
logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}
// Exec implements the exec driver Driver interface.
func (d *Driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, hooks execdriver.Hooks) (int, error) {
var (
term execdriver.Terminal
err error
exitCode int32
errno uint32
)
active := d.activeContainers[c.ID]
if active == nil {
return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: processConfig.Tty, // Note NOT c.ProcessConfig.Tty
WorkingDirectory: c.WorkingDir,
}
// Configure the environment for the process // Note NOT c.ProcessConfig.Env
createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)
// Create the commandline for the process // Note NOT c.ProcessConfig
createProcessParms.CommandLine, err = createCommandLine(processConfig, false)
if err != nil {
return -1, err
}
// Start the command running in the container.
pid, stdin, stdout, stderr, rc, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !processConfig.Tty, createProcessParms)
if err != nil {
// TODO Windows: TP4 Workaround. In Hyper-V containers, there is a limitation
// of one exec per container. This should be fixed post TP4. CreateProcessInComputeSystem
// will return a specific error which we handle here to give a good error message
// back to the user instead of an inactionable "An invalid argument was supplied"
if rc == hcsshim.Win32InvalidArgument {
return -1, fmt.Errorf("The limit of docker execs per Hyper-V container has been exceeded")
}
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return -1, err
}
// Now that the process has been launched, begin copying data to and from
// the named pipes for the std handles.
setupPipes(stdin, stdout, stderr, pipes)
// Note NOT c.ProcessConfig.Tty
if processConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
processConfig.Terminal = term
// Invoke the start callback
if hooks.Start != nil {
// A closed channel for OOM is returned here as it will be
// non-blocking and return the correct result when read.
chOOM := make(chan struct{})
close(chOOM)
hooks.Start(&c.ProcessConfig, int(pid), chOOM)
}
if exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite); err != nil {
if errno == hcsshim.Win32PipeHasBeenEnded {
logrus.Debugf("Exiting Run() after WaitForProcessInComputeSystem failed with recognised error 0x%X", errno)
return hcsshim.WaitErrExecFailed, nil
}
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): 0x%X %s", errno, err)
return -1, err
}
logrus.Debugln("Exiting Run()", c.ID)
return int(exitCode), nil
}
func (d *driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (int, error) {
var (
inListen, outListen, errListen *npipe.PipeListener
term execdriver.Terminal
err error
randomID string = stringid.GenerateNonCryptoID()
serverPipeFormat, clientPipeFormat string
pid uint32
exitCode int32
)
active := d.activeContainers[c.ID]
if active == nil {
return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: processConfig.Tty, // Note NOT c.ProcessConfig.Tty
WorkingDirectory: c.WorkingDir,
}
// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)
// We use another unique ID here for each exec instance otherwise it
// may conflict with the pipe name being used by RUN.
// We use a different pipe name between real and dummy mode in the HCS
if dummyMode {
clientPipeFormat = `\\.\pipe\docker-exec-%[1]s-%[2]s-%[3]s`
serverPipeFormat = clientPipeFormat
} else {
clientPipeFormat = `\\.\pipe\docker-exec-%[2]s-%[3]s`
serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-exec-%[2]s-%[3]s`
}
// Connect stdin
if pipes.Stdin != nil {
stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stdin")
createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stdin")
// Listen on the named pipe
inListen, err = npipe.Listen(stdInPipe)
if err != nil {
logrus.Errorf("stdin failed to listen on %s %s ", stdInPipe, err)
return -1, err
}
defer inListen.Close()
// Launch a goroutine to do the accept. We do this so that we can
// cause an otherwise blocking goroutine to gracefully close when
// the caller (us) closes the listener
go stdinAccept(inListen, stdInPipe, pipes.Stdin)
}
// Connect stdout
stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stdout")
createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stdout")
outListen, err = npipe.Listen(stdOutPipe)
if err != nil {
logrus.Errorf("stdout failed to listen on %s %s", stdOutPipe, err)
return -1, err
}
defer outListen.Close()
go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)
// No stderr on TTY. Note NOT c.ProcessConfig.Tty
if !processConfig.Tty {
// Connect stderr
stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stderr")
createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stderr")
errListen, err = npipe.Listen(stdErrPipe)
if err != nil {
logrus.Errorf("Stderr failed to listen on %s %s", stdErrPipe, err)
return -1, err
}
defer errListen.Close()
go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
}
// While this should get caught earlier, just in case, validate that we
// have something to run.
if processConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return -1, err
}
// Build the command line of the process
createProcessParms.CommandLine = processConfig.Entrypoint
for _, arg := range processConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + arg
}
logrus.Debugln("commandLine: ", createProcessParms.CommandLine)
// Start the command running in the container.
pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return -1, err
}
// Note NOT c.ProcessConfig.Tty
if processConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
processConfig.Terminal = term
// Invoke the start callback
if startCallback != nil {
startCallback(&c.ProcessConfig, int(pid))
}
if exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid); err != nil {
logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
return -1, err
}
// TODO Windows - Do something with this exit code
logrus.Debugln("Exiting Run() with ExitCode 0", c.ID)
return int(exitCode), nil
}
// Exec implements the exec driver Driver interface.
func (d *Driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (int, error) {
var (
term execdriver.Terminal
err error
exitCode int32
)
active := d.activeContainers[c.ID]
if active == nil {
return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: processConfig.Tty, // Note NOT c.ProcessConfig.Tty
WorkingDirectory: c.WorkingDir,
}
// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)
// While this should get caught earlier, just in case, validate that we
// have something to run.
if processConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return -1, err
}
// Build the command line of the process
createProcessParms.CommandLine = processConfig.Entrypoint
for _, arg := range processConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + arg
}
logrus.Debugln("commandLine: ", createProcessParms.CommandLine)
// Start the command running in the container.
pid, stdin, stdout, stderr, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !processConfig.Tty, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return -1, err
}
// Now that the process has been launched, begin copying data to and from
// the named pipes for the std handles.
setupPipes(stdin, stdout, stderr, pipes)
// Note NOT c.ProcessConfig.Tty
if processConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
processConfig.Terminal = term
// Invoke the start callback
if startCallback != nil {
startCallback(&c.ProcessConfig, int(pid))
}
if exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid); err != nil {
logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
return -1, err
}
// TODO Windows - Do something with this exit code
logrus.Debugln("Exiting Run() with ExitCode 0", c.ID)
return int(exitCode), nil
}
// waitExit runs as a goroutine waiting for the process to exit. It's
// equivalent to (in the linux containerd world) where events come in for
// state change notifications from containerd.
func (ctr *container) waitExit(pid uint32, processFriendlyName string, isFirstProcessToStart bool) error {
logrus.Debugln("waitExit on pid", pid)
// Block indefinitely for the process to exit.
exitCode, err := hcsshim.WaitForProcessInComputeSystem(ctr.containerID, pid, hcsshim.TimeoutInfinite)
if err != nil {
if herr, ok := err.(*hcsshim.HcsError); ok && herr.Err != syscall.ERROR_BROKEN_PIPE {
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): %s", err)
}
// Fall through here, do not return. This ensures we attempt to continue the
// shutdown in HCS nad tell the docker engine that the process/container
// has exited to avoid a container being dropped on the floor.
}
// Assume the container has exited
si := StateInfo{
State: StateExit,
ExitCode: uint32(exitCode),
Pid: pid,
ProcessID: processFriendlyName,
}
// But it could have been an exec'd process which exited
if !isFirstProcessToStart {
si.State = StateExitProcess
}
// If this is the init process, always call into vmcompute.dll to
// shutdown the container after we have completed.
if isFirstProcessToStart {
logrus.Debugf("Shutting down container %s", ctr.containerID)
// Explicit timeout here rather than hcsshim.TimeoutInfinte to avoid a
// (remote) possibility that ShutdownComputeSystem hangs indefinitely.
const shutdownTimeout = 5 * 60 * 1000 // 5 minutes
if err := hcsshim.ShutdownComputeSystem(ctr.containerID, shutdownTimeout, "waitExit"); err != nil {
if herr, ok := err.(*hcsshim.HcsError); !ok ||
(herr.Err != hcsshim.ERROR_SHUTDOWN_IN_PROGRESS &&
herr.Err != ErrorBadPathname &&
herr.Err != syscall.ERROR_PATH_NOT_FOUND) {
logrus.Warnf("Ignoring error from ShutdownComputeSystem %s", err)
}
} else {
logrus.Debugf("Completed shutting down container %s", ctr.containerID)
}
// BUGBUG - Is taking the lock necessary here? Should it just be taken for
// the deleteContainer call, not for the restart logic? @jhowardmsft
ctr.client.lock(ctr.containerID)
defer ctr.client.unlock(ctr.containerID)
if si.State == StateExit && ctr.restartManager != nil {
restart, wait, err := ctr.restartManager.ShouldRestart(uint32(exitCode))
if err != nil {
logrus.Error(err)
} else if restart {
si.State = StateRestart
ctr.restarting = true
go func() {
err := <-wait
ctr.restarting = false
if err != nil {
si.State = StateExit
if err := ctr.client.backend.StateChanged(ctr.containerID, si); err != nil {
logrus.Error(err)
}
logrus.Error(err)
} else {
ctr.client.Create(ctr.containerID, ctr.ociSpec, ctr.options...)
}
}()
}
}
// Remove process from list if we have exited
// We need to do so here in case the Message Handler decides to restart it.
if si.State == StateExit {
ctr.client.deleteContainer(ctr.friendlyName)
}
}
// Call into the backend to notify it of the state change.
logrus.Debugf("waitExit() calling backend.StateChanged %v", si)
if err := ctr.client.backend.StateChanged(ctr.containerID, si); err != nil {
logrus.Error(err)
}
logrus.Debugln("waitExit() completed OK")
return nil
}
// Exec implements the exec driver Driver interface.
func (d *Driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, hooks execdriver.Hooks) (int, error) {
var (
term execdriver.Terminal
err error
exitCode int32
errno uint32
)
active := d.activeContainers[c.ID]
if active == nil {
return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: processConfig.Tty, // Note NOT c.ProcessConfig.Tty
WorkingDirectory: c.WorkingDir,
}
// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)
// While this should get caught earlier, just in case, validate that we
// have something to run.
if processConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return -1, err
}
// Build the command line of the process
createProcessParms.CommandLine = processConfig.Entrypoint
for _, arg := range processConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + arg
}
logrus.Debugln("commandLine: ", createProcessParms.CommandLine)
// Start the command running in the container.
pid, stdin, stdout, stderr, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !processConfig.Tty, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return -1, err
}
// Now that the process has been launched, begin copying data to and from
// the named pipes for the std handles.
setupPipes(stdin, stdout, stderr, pipes)
// Note NOT c.ProcessConfig.Tty
if processConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
processConfig.Terminal = term
// Invoke the start callback
if hooks.Start != nil {
// A closed channel for OOM is returned here as it will be
// non-blocking and return the correct result when read.
chOOM := make(chan struct{})
close(chOOM)
hooks.Start(&c.ProcessConfig, int(pid), chOOM)
}
if exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite); err != nil {
if errno == hcsshim.Win32PipeHasBeenEnded {
logrus.Debugf("Exiting Run() after WaitForProcessInComputeSystem failed with recognised error 0x%X", errno)
return hcsshim.WaitErrExecFailed, nil
}
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): 0x%X %s", errno, err)
return -1, err
}
logrus.Debugln("Exiting Run()", c.ID)
return int(exitCode), nil
}
// waitExit runs as a goroutine waiting for the process to exit. It's
// equivalent to (in the linux containerd world) where events come in for
// state change notifications from containerd.
func (ctr *container) waitExit(pid uint32, processFriendlyName string, isFirstProcessToStart bool) error {
logrus.Debugln("waitExit on pid", pid)
// Block indefinitely for the process to exit.
exitCode, err := hcsshim.WaitForProcessInComputeSystem(ctr.containerID, pid, hcsshim.TimeoutInfinite)
if err != nil {
if herr, ok := err.(*hcsshim.HcsError); ok && herr.Err != syscall.ERROR_BROKEN_PIPE {
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): %s", err)
}
// Fall through here, do not return. This ensures we attempt to continue the
// shutdown in HCS nad tell the docker engine that the process/container
// has exited to avoid a container being dropped on the floor.
}
// Assume the container has exited
si := StateInfo{
CommonStateInfo: CommonStateInfo{
State: StateExit,
ExitCode: uint32(exitCode),
Pid: pid,
ProcessID: processFriendlyName,
},
UpdatePending: false,
}
// But it could have been an exec'd process which exited
if !isFirstProcessToStart {
si.State = StateExitProcess
} else {
// Since this is the init process, always call into vmcompute.dll to
// shutdown the container after we have completed.
propertyCheckFlag := 1 // Include update pending check.
csProperties, err := hcsshim.GetComputeSystemProperties(ctr.containerID, uint32(propertyCheckFlag))
if err != nil {
logrus.Warnf("GetComputeSystemProperties failed (container may have been killed): %s", err)
} else {
si.UpdatePending = csProperties.AreUpdatesPending
}
logrus.Debugf("Shutting down container %s", ctr.containerID)
// Explicit timeout here rather than hcsshim.TimeoutInfinte to avoid a
// (remote) possibility that ShutdownComputeSystem hangs indefinitely.
const shutdownTimeout = 5 * 60 * 1000 // 5 minutes
if err := hcsshim.ShutdownComputeSystem(ctr.containerID, shutdownTimeout, "waitExit"); err != nil {
if herr, ok := err.(*hcsshim.HcsError); !ok ||
(herr.Err != hcsshim.ERROR_SHUTDOWN_IN_PROGRESS &&
herr.Err != ErrorBadPathname &&
herr.Err != syscall.ERROR_PATH_NOT_FOUND) {
logrus.Debugf("waitExit - error from ShutdownComputeSystem on %s %v. Calling TerminateComputeSystem", ctr.containerCommon, err)
if err := hcsshim.TerminateComputeSystem(ctr.containerID, shutdownTimeout, "waitExit"); err != nil {
logrus.Debugf("waitExit - ignoring error from TerminateComputeSystem %s %v", ctr.containerID, err)
} else {
logrus.Debugf("Successful TerminateComputeSystem after failed ShutdownComputeSystem on %s in waitExit", ctr.containerID)
}
}
} else {
logrus.Debugf("Completed shutting down container %s", ctr.containerID)
}
if !ctr.manualStopRequested && ctr.restartManager != nil {
restart, wait, err := ctr.restartManager.ShouldRestart(uint32(exitCode), false, time.Since(ctr.startedAt))
if err != nil {
logrus.Error(err)
} else if restart {
si.State = StateRestart
ctr.restarting = true
go func() {
err := <-wait
ctr.restarting = false
ctr.client.deleteContainer(ctr.friendlyName)
if err != nil {
si.State = StateExit
if err := ctr.client.backend.StateChanged(ctr.containerID, si); err != nil {
logrus.Error(err)
}
logrus.Error(err)
} else {
ctr.client.Create(ctr.containerID, ctr.ociSpec, ctr.options...)
}
}()
}
}
// Remove process from list if we have exited
// We need to do so here in case the Message Handler decides to restart it.
if si.State == StateExit {
ctr.client.deleteContainer(ctr.friendlyName)
}
}
// Call into the backend to notify it of the state change.
logrus.Debugf("waitExit() calling backend.StateChanged %v", si)
if err := ctr.client.backend.StateChanged(ctr.containerID, si); err != nil {
logrus.Error(err)
}
logrus.Debugln("waitExit() completed OK")
return nil
}
// Run implements the exec driver Driver interface
func (d *Driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, hooks execdriver.Hooks) (execdriver.ExitStatus, error) {
var (
term execdriver.Terminal
err error
)
// Make sure the client isn't asking for options which aren't supported
err = checkSupportedOptions(c)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
cu := &containerInit{
SystemType: "Container",
Name: c.ID,
Owner: defaultOwner,
IsDummy: dummyMode,
VolumePath: c.Rootfs,
IgnoreFlushesDuringBoot: c.FirstStart,
LayerFolderPath: c.LayerFolder,
ProcessorWeight: c.Resources.CPUShares,
HostName: c.Hostname,
}
for i := 0; i < len(c.LayerPaths); i++ {
_, filename := filepath.Split(c.LayerPaths[i])
g, err := hcsshim.NameToGuid(filename)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
cu.Layers = append(cu.Layers, layer{
ID: g.ToString(),
Path: c.LayerPaths[i],
})
}
// TODO Windows. At some point, when there is CLI on docker run to
// enable the IP Address of the container to be passed into docker run,
// the IP Address needs to be wired through to HCS in the JSON. It
// would be present in c.Network.Interface.IPAddress. See matching
// TODO in daemon\container_windows.go, function populateCommand.
if c.Network.Interface != nil {
var pbs []portBinding
// Enumerate through the port bindings specified by the user and convert
// them into the internal structure matching the JSON blob that can be
// understood by the HCS.
for i, v := range c.Network.Interface.PortBindings {
proto := strings.ToUpper(i.Proto())
if proto != "TCP" && proto != "UDP" {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid protocol %s", i.Proto())
}
if len(v) > 1 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support more than one host port in NAT settings")
}
for _, v2 := range v {
var (
iPort, ePort int
err error
)
if len(v2.HostIP) != 0 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support host IP addresses in NAT settings")
}
if ePort, err = strconv.Atoi(v2.HostPort); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid container port %s: %s", v2.HostPort, err)
}
if iPort, err = strconv.Atoi(i.Port()); err != nil {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid internal port %s: %s", i.Port(), err)
}
if iPort < 0 || iPort > 65535 || ePort < 0 || ePort > 65535 {
return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("specified NAT port is not in allowed range")
}
pbs = append(pbs,
portBinding{ExternalPort: ePort,
InternalPort: iPort,
Protocol: proto})
}
}
// TODO Windows: TP3 workaround. Allow the user to override the name of
// the Container NAT device through an environment variable. This will
// ultimately be a global daemon parameter on Windows, similar to -b
// for the name of the virtual switch (aka bridge).
cn := os.Getenv("DOCKER_CONTAINER_NAT")
if len(cn) == 0 {
cn = defaultContainerNAT
}
dev := device{
DeviceType: "Network",
Connection: &networkConnection{
NetworkName: c.Network.Interface.Bridge,
// TODO Windows: Fixme, next line. Needs HCS fix.
EnableNat: false,
Nat: natSettings{
Name: cn,
PortBindings: pbs,
},
},
}
if c.Network.Interface.MacAddress != "" {
windowsStyleMAC := strings.Replace(
c.Network.Interface.MacAddress, ":", "-", -1)
dev.Settings = networkSettings{
MacAddress: windowsStyleMAC,
}
}
cu.Devices = append(cu.Devices, dev)
} else {
logrus.Debugln("No network interface")
}
configurationb, err := json.Marshal(cu)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
configuration := string(configurationb)
err = hcsshim.CreateComputeSystem(c.ID, configuration)
if err != nil {
logrus.Debugln("Failed to create temporary container ", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Start the container
logrus.Debugln("Starting container ", c.ID)
err = hcsshim.StartComputeSystem(c.ID)
if err != nil {
logrus.Errorf("Failed to start compute system: %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer func() {
// Stop the container
if forceKill {
logrus.Debugf("Forcibly terminating container %s", c.ID)
if errno, err := hcsshim.TerminateComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
logrus.Warnf("Ignoring error from TerminateComputeSystem 0x%X %s", errno, err)
}
} else {
logrus.Debugf("Shutting down container %s", c.ID)
if errno, err := hcsshim.ShutdownComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
if errno != hcsshim.Win32SystemShutdownIsInProgress &&
errno != hcsshim.Win32SpecifiedPathInvalid &&
errno != hcsshim.Win32SystemCannotFindThePathSpecified {
logrus.Warnf("Ignoring error from ShutdownComputeSystem 0x%X %s", errno, err)
}
}
}
}()
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: c.ProcessConfig.Tty,
WorkingDirectory: c.WorkingDir,
ConsoleSize: c.ProcessConfig.ConsoleSize,
}
// Configure the environment for the process
createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)
// This should get caught earlier, but just in case - validate that we
// have something to run
if c.ProcessConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Build the command line of the process
createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
for _, arg := range c.ProcessConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + syscall.EscapeArg(arg)
}
logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)
// Start the command running in the container.
pid, stdin, stdout, stderr, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !c.ProcessConfig.Tty, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Now that the process has been launched, begin copying data to and from
// the named pipes for the std handles.
setupPipes(stdin, stdout, stderr, pipes)
//Save the PID as we'll need this in Kill()
logrus.Debugf("PID %d", pid)
c.ContainerPid = int(pid)
if c.ProcessConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
c.ProcessConfig.Terminal = term
// Maintain our list of active containers. We'll need this later for exec
// and other commands.
d.Lock()
d.activeContainers[c.ID] = &activeContainer{
command: c,
}
d.Unlock()
if hooks.Start != nil {
// A closed channel for OOM is returned here as it will be
// non-blocking and return the correct result when read.
chOOM := make(chan struct{})
close(chOOM)
hooks.Start(&c.ProcessConfig, int(pid), chOOM)
}
var (
exitCode int32
errno uint32
)
exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite)
if err != nil {
if errno != hcsshim.Win32PipeHasBeenEnded {
logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): %s", err)
}
// Do NOT return err here as the container would have
// started, otherwise docker will deadlock. It's perfectly legitimate
// for WaitForProcessInComputeSystem to fail in situations such
// as the container being killed on another thread.
return execdriver.ExitStatus{ExitCode: hcsshim.WaitErrExecFailed}, nil
}
logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}
func (d *driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (execdriver.ExitStatus, error) {
var (
term execdriver.Terminal
err error
inListen, outListen, errListen *npipe.PipeListener
)
// Make sure the client isn't asking for options which aren't supported
err = checkSupportedOptions(c)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
cu := &containerInit{
SystemType: "Container",
Name: c.ID,
IsDummy: dummyMode,
VolumePath: c.Rootfs,
IgnoreFlushesDuringBoot: c.FirstStart,
LayerFolderPath: c.LayerFolder,
}
for i := 0; i < len(c.LayerPaths); i++ {
cu.Layers = append(cu.Layers, layer{
Id: hcsshim.NewGUID(c.LayerPaths[i]).ToString(),
Path: c.LayerPaths[i],
})
}
if c.Network.Interface != nil {
dev := device{
DeviceType: "Network",
Connection: &networkConnection{
NetworkName: c.Network.Interface.Bridge,
EnableNat: false,
},
}
if c.Network.Interface.MacAddress != "" {
windowsStyleMAC := strings.Replace(
c.Network.Interface.MacAddress, ":", "-", -1)
dev.Settings = networkSettings{
MacAddress: windowsStyleMAC,
}
}
logrus.Debugf("Virtual switch '%s', mac='%s'", c.Network.Interface.Bridge, c.Network.Interface.MacAddress)
cu.Devices = append(cu.Devices, dev)
} else {
logrus.Debugln("No network interface")
}
configurationb, err := json.Marshal(cu)
if err != nil {
return execdriver.ExitStatus{ExitCode: -1}, err
}
configuration := string(configurationb)
err = hcsshim.CreateComputeSystem(c.ID, configuration)
if err != nil {
logrus.Debugln("Failed to create temporary container ", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Start the container
logrus.Debugln("Starting container ", c.ID)
err = hcsshim.StartComputeSystem(c.ID)
if err != nil {
logrus.Errorf("Failed to start compute system: %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer func() {
// Stop the container
if terminateMode {
logrus.Debugf("Terminating container %s", c.ID)
if err := hcsshim.TerminateComputeSystem(c.ID); err != nil {
// IMPORTANT: Don't fail if fails to change state. It could already
// have been stopped through kill().
// Otherwise, the docker daemon will hang in job wait()
logrus.Warnf("Ignoring error from TerminateComputeSystem %s", err)
}
} else {
logrus.Debugf("Shutting down container %s", c.ID)
if err := hcsshim.ShutdownComputeSystem(c.ID); err != nil {
// IMPORTANT: Don't fail if fails to change state. It could already
// have been stopped through kill().
// Otherwise, the docker daemon will hang in job wait()
logrus.Warnf("Ignoring error from ShutdownComputeSystem %s", err)
}
}
}()
// We use a different pipe name between real and dummy mode in the HCS
var serverPipeFormat, clientPipeFormat string
if dummyMode {
clientPipeFormat = `\\.\pipe\docker-run-%[1]s-%[2]s`
serverPipeFormat = clientPipeFormat
} else {
clientPipeFormat = `\\.\pipe\docker-run-%[2]s`
serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-run-%[2]s`
}
createProcessParms := hcsshim.CreateProcessParams{
EmulateConsole: c.ProcessConfig.Tty,
WorkingDirectory: c.WorkingDir,
ConsoleSize: c.ProcessConfig.ConsoleSize,
}
// Configure the environment for the process
createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)
// Connect stdin
if pipes.Stdin != nil {
stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdin")
createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdin")
// Listen on the named pipe
inListen, err = npipe.Listen(stdInPipe)
if err != nil {
logrus.Errorf("stdin failed to listen on %s err=%s", stdInPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer inListen.Close()
// Launch a goroutine to do the accept. We do this so that we can
// cause an otherwise blocking goroutine to gracefully close when
// the caller (us) closes the listener
go stdinAccept(inListen, stdInPipe, pipes.Stdin)
}
// Connect stdout
stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdout")
createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdout")
outListen, err = npipe.Listen(stdOutPipe)
if err != nil {
logrus.Errorf("stdout failed to listen on %s err=%s", stdOutPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer outListen.Close()
go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)
// No stderr on TTY.
if !c.ProcessConfig.Tty {
// Connect stderr
stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stderr")
createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stderr")
errListen, err = npipe.Listen(stdErrPipe)
if err != nil {
logrus.Errorf("stderr failed to listen on %s err=%s", stdErrPipe, err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
defer errListen.Close()
go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
}
// This should get caught earlier, but just in case - validate that we
// have something to run
if c.ProcessConfig.Entrypoint == "" {
err = errors.New("No entrypoint specified")
logrus.Error(err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
// Build the command line of the process
createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
for _, arg := range c.ProcessConfig.Arguments {
logrus.Debugln("appending ", arg)
createProcessParms.CommandLine += " " + arg
}
logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)
// Start the command running in the container.
var pid uint32
pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)
if err != nil {
logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
//Save the PID as we'll need this in Kill()
logrus.Debugf("PID %d", pid)
c.ContainerPid = int(pid)
if c.ProcessConfig.Tty {
term = NewTtyConsole(c.ID, pid)
} else {
term = NewStdConsole()
}
c.ProcessConfig.Terminal = term
// Maintain our list of active containers. We'll need this later for exec
// and other commands.
d.Lock()
d.activeContainers[c.ID] = &activeContainer{
command: c,
}
d.Unlock()
// Invoke the start callback
if startCallback != nil {
startCallback(&c.ProcessConfig, int(pid))
}
var exitCode int32
exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid)
if err != nil {
logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
return execdriver.ExitStatus{ExitCode: -1}, err
}
logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}