func serializeLinkNode(w io.Writer, l *LinkNode) error {
var buf [8]byte
byteOrder.PutUint32(buf[:4], uint32(l.Network))
if _, err := w.Write(buf[:4]); err != nil {
return err
}
serializedID := l.IdentityPub.SerializeCompressed()
if _, err := w.Write(serializedID); err != nil {
return err
}
seenUnix := uint64(l.LastSeen.Unix())
byteOrder.PutUint64(buf[:], seenUnix)
if _, err := w.Write(buf[:]); err != nil {
return err
}
numAddrs := uint32(len(l.Addresses))
byteOrder.PutUint32(buf[:4], numAddrs)
if _, err := w.Write(buf[:4]); err != nil {
return err
}
for _, addr := range l.Addresses {
addrString := addr.String()
if err := wire.WriteVarString(w, 0, addrString); err != nil {
return err
}
}
return nil
}
// writeElement is a one-stop shop to write the big endian representation of
// any element which is to be serialized for the wire protocol. The passed
// io.Writer should be backed by an appropriatly sized byte slice, or be able
// to dynamically expand to accomdate additional data.
//
// TODO(roasbeef): this should eventually draw from a buffer pool for
// serialization.
// TODO(roasbeef): switch to var-ints for all?
func writeElement(w io.Writer, element interface{}) error {
switch e := element.(type) {
case uint8:
var b [1]byte
b[0] = byte(e)
if _, err := w.Write(b[:]); err != nil {
return err
}
case uint16:
var b [2]byte
binary.BigEndian.PutUint16(b[:], uint16(e))
if _, err := w.Write(b[:]); err != nil {
return err
}
case ErrorCode:
var b [2]byte
binary.BigEndian.PutUint16(b[:], uint16(e))
if _, err := w.Write(b[:]); err != nil {
return err
}
case CreditsAmount:
if err := binary.Write(w, binary.BigEndian, int64(e)); err != nil {
return err
}
case uint32:
var b [4]byte
binary.BigEndian.PutUint32(b[:], uint32(e))
if _, err := w.Write(b[:]); err != nil {
return err
}
case uint64:
var b [8]byte
binary.BigEndian.PutUint64(b[:], uint64(e))
if _, err := w.Write(b[:]); err != nil {
return err
}
case HTLCKey:
if err := binary.Write(w, binary.BigEndian, int64(e)); err != nil {
return err
}
case btcutil.Amount:
if err := binary.Write(w, binary.BigEndian, int64(e)); err != nil {
return err
}
case *btcec.PublicKey:
var b [33]byte
serializedPubkey := e.SerializeCompressed()
copy(b[:], serializedPubkey)
// TODO(roasbeef): use WriteVarBytes here?
if _, err := w.Write(b[:]); err != nil {
return err
}
case []uint64:
// Enforce a max number of elements in a uint64 slice.
numItems := len(e)
if numItems > 65535 {
return fmt.Errorf("Too many []uint64s")
}
// First write out the the number of elements in the slice as a
// length prefix.
if err := writeElement(w, uint16(numItems)); err != nil {
return err
}
// After the prefix detailing the number of elements, write out
// each uint64 in series.
for i := 0; i < numItems; i++ {
if err := writeElement(w, e[i]); err != nil {
return err
}
}
case []*btcec.Signature:
// Enforce a sane number for the maximum number of signatures.
numSigs := len(e)
if numSigs > 127 {
return fmt.Errorf("Too many signatures!")
}
// First write out the the number of elements in the slice as a
// length prefix.
if err := writeElement(w, uint8(numSigs)); err != nil {
return err
}
// After the prefix detailing the number of elements, write out
// each signature in series.
for i := 0; i < numSigs; i++ {
if err := writeElement(w, e[i]); err != nil {
return err
}
}
case *btcec.Signature:
sig := e.Serialize()
if len(sig) > 73 {
return fmt.Errorf("Signature too long!")
}
if err := wire.WriteVarBytes(w, 0, sig); err != nil {
return err
}
case *wire.ShaHash:
if _, err := w.Write(e[:]); err != nil {
return err
}
case [][32]byte:
// First write out the number of elements in the slice.
sliceSize := len(e)
if err := writeElement(w, uint16(sliceSize)); err != nil {
return err
}
// Then write each out sequentially.
for _, element := range e {
if err := writeElement(w, element); err != nil {
return err
}
}
case [32]byte:
// TODO(roasbeef): should be factor out to caller logic...
if _, err := w.Write(e[:]); err != nil {
return err
}
case wire.BitcoinNet:
var b [4]byte
binary.BigEndian.PutUint32(b[:], uint32(e))
if _, err := w.Write(b[:]); err != nil {
return err
}
case []byte:
// Enforce the maxmium length of all slices used in the wire
// protocol.
sliceLength := len(e)
if sliceLength > MaxSliceLength {
return fmt.Errorf("Slice length too long!")
}
if err := wire.WriteVarBytes(w, 0, e); err != nil {
return err
}
case PkScript:
// Make sure it's P2PKH or P2SH size or less.
scriptLength := len(e)
if scriptLength > 25 {
return fmt.Errorf("PkScript too long!")
}
if err := wire.WriteVarBytes(w, 0, e); err != nil {
return err
}
case string:
strlen := len(e)
if strlen > MaxSliceLength {
return fmt.Errorf("String too long!")
}
if err := wire.WriteVarString(w, 0, e); err != nil {
return err
}
case []*wire.TxIn:
// Write the size (1-byte)
if len(e) > 127 {
return fmt.Errorf("Too many txins")
}
// Write out the number of txins.
if err := writeElement(w, uint8(len(e))); err != nil {
return err
}
// Append the actual TxIns (Size: NumOfTxins * 36)
// During serialization we leave out the sequence number to
// eliminate any funny business.
for _, in := range e {
if err := writeElement(w, in); err != nil {
return err
}
}
case *wire.TxIn:
// First write out the previous txid.
var h [32]byte
copy(h[:], e.PreviousOutPoint.Hash[:])
if _, err := w.Write(h[:]); err != nil {
return err
}
// Then the exact index of the previous out point.
var idx [4]byte
binary.BigEndian.PutUint32(idx[:], e.PreviousOutPoint.Index)
if _, err := w.Write(idx[:]); err != nil {
return err
}
case *wire.OutPoint:
// TODO(roasbeef): consolidate with above
// First write out the previous txid.
var h [32]byte
copy(h[:], e.Hash[:])
if _, err := w.Write(h[:]); err != nil {
return err
}
// Then the exact index of this output.
var idx [4]byte
binary.BigEndian.PutUint32(idx[:], e.Index)
if _, err := w.Write(idx[:]); err != nil {
return err
}
// TODO(roasbeef): *MsgTx
default:
return fmt.Errorf("Unknown type in writeElement: %T", e)
}
return nil
}