func populateStateFromInstalled() error {
all, err := (&snappy.Overlord{}).Installed()
if err != nil {
return err
}
if osutil.FileExists(dirs.SnapStateFile) {
return fmt.Errorf("cannot create state: state %q already exists", dirs.SnapStateFile)
}
st := state.New(&overlordStateBackend{
path: dirs.SnapStateFile,
})
st.Lock()
defer st.Unlock()
for _, sn := range all {
// no need to do a snapstate.Get() because this is firstboot
info := sn.Info()
var snapst snapstate.SnapState
snapst.Sequence = append(snapst.Sequence, &info.SideInfo)
snapst.Channel = info.Channel
snapst.Active = sn.IsActive()
snapstate.Set(st, sn.Name(), &snapst)
}
return nil
}
func (s *interfaceManagerSuite) undoDevModeCheck(c *C, flags snappy.InstallFlags, devMode bool) {
// Put the OS and sample snaps in place.
s.mockSnap(c, osSnapYaml)
snapInfo := s.mockSnap(c, sampleSnapYaml)
// Initialize the manager. This registers both snaps.
mgr := s.manager(c)
// Run the setup-profiles task in UndoMode and let it finish.
change := s.addSetupSnapSecurityChange(c, &snapstate.SnapSetup{
Name: snapInfo.Name(), Flags: int(flags), Revision: snapInfo.Revision})
s.state.Lock()
task := change.Tasks()[0]
// Inject the old value of DevMode flag for the task handler to restore
task.Set("old-devmode", devMode)
task.SetStatus(state.UndoStatus)
s.state.Unlock()
mgr.Ensure()
mgr.Wait()
mgr.Stop()
// Change succeeds
s.state.Lock()
defer s.state.Unlock()
c.Check(change.Status(), Equals, state.UndoneStatus)
// SnapState.Flags now holds the original value of DevMode
var snapState snapstate.SnapState
err := snapstate.Get(s.state, snapInfo.Name(), &snapState)
c.Assert(err, IsNil)
c.Check(snapState.DevMode(), Equals, devMode)
}
func setupSnapSecurity(task *state.Task, snapInfo *snap.Info, repo *interfaces.Repository) error {
st := task.State()
var snapState snapstate.SnapState
snapName := snapInfo.Name()
if err := snapstate.Get(st, snapName, &snapState); err != nil {
task.Errorf("cannot get state of snap %q: %s", snapName, err)
return err
}
for _, backend := range securityBackends {
st.Unlock()
err := backend.Setup(snapInfo, snapState.DevMode(), repo)
st.Lock()
if err != nil {
task.Errorf("cannot setup %s for snap %q: %s", backend.Name(), snapName, err)
return err
}
}
return nil
}
// The setup-profiles task will honor snappy.DeveloperMode flag by storing it
// in the SnapState.Flags (as DevMode) and by actually setting up security
// using that flag. Old copy of SnapState.Flag's DevMode is saved for the undo
// handler under `old-devmode`.
func (s *interfaceManagerSuite) TestSetupProfilesHonorsDevMode(c *C) {
// Put the OS snap in place.
mgr := s.manager(c)
// Initialize the manager. This registers the OS snap.
snapInfo := s.mockSnap(c, sampleSnapYaml)
// Run the setup-profiles task and let it finish.
// Note that the task will see SnapSetup.Flags equal to DeveloperMode.
change := s.addSetupSnapSecurityChange(c, &snapstate.SnapSetup{
Name: snapInfo.Name(), Flags: int(snappy.DeveloperMode), Revision: snapInfo.Revision})
mgr.Ensure()
mgr.Wait()
mgr.Stop()
s.state.Lock()
defer s.state.Unlock()
// Ensure that the task succeeded.
c.Check(change.Status(), Equals, state.DoneStatus)
// The snap was setup with DevMode equal to true.
c.Assert(s.secBackend.SetupCalls, HasLen, 1)
c.Assert(s.secBackend.RemoveCalls, HasLen, 0)
c.Check(s.secBackend.SetupCalls[0].SnapInfo.Name(), Equals, "snap")
c.Check(s.secBackend.SetupCalls[0].DevMode, Equals, true)
// SnapState stored the value of DevMode
var snapState snapstate.SnapState
err := snapstate.Get(s.state, snapInfo.Name(), &snapState)
c.Assert(err, IsNil)
c.Check(snapState.DevMode(), Equals, true)
// The old value of DevMode was saved in the task in case undo is needed.
task := change.Tasks()[0]
var oldDevMode bool
err = task.Get("old-devmode", &oldDevMode)
c.Assert(err, IsNil)
c.Check(oldDevMode, Equals, false)
}
// localSnapInfo returns the information about the current snap for the given name plus the SnapState with the active flag and other snap revisions.
func localSnapInfo(st *state.State, name string) (info *snap.Info, active bool, err error) {
st.Lock()
defer st.Unlock()
var snapst snapstate.SnapState
err = snapstate.Get(st, name, &snapst)
if err != nil && err != state.ErrNoState {
return nil, false, fmt.Errorf("cannot consult state: %v", err)
}
cur := snapst.Current()
if cur == nil {
return nil, false, nil
}
info, err = snap.ReadInfo(name, cur)
if err != nil {
return nil, false, fmt.Errorf("cannot read snap details: %v", err)
}
return info, snapst.Active, nil
}
func (s *snapmgrQuerySuite) TestAll(c *C) {
st := s.st
st.Lock()
defer st.Unlock()
snapStates, err := snapstate.All(st)
c.Assert(err, IsNil)
c.Check(snapStates, HasLen, 1)
var snapst *snapstate.SnapState
for name, sst := range snapStates {
c.Assert(name, Equals, "name1")
snapst = sst
}
c.Check(snapst.Active, Equals, true)
c.Check(snapst.Current(), NotNil)
info12, err := snap.ReadInfo("name1", snapst.Current())
c.Assert(err, IsNil)
c.Check(info12.Name(), Equals, "name1")
c.Check(info12.Revision, Equals, 12)
c.Check(info12.Summary(), Equals, "s12")
c.Check(info12.Version, Equals, "1.2")
c.Check(info12.Description(), Equals, "Lots of text")
info11, err := snap.ReadInfo("name1", snapst.Sequence[0])
c.Assert(err, IsNil)
c.Check(info11.Name(), Equals, "name1")
c.Check(info11.Revision, Equals, 11)
c.Check(info11.Version, Equals, "1.1")
}
func (s *snapmgrTestSuite) TestInstallSubequentLocalIntegration(c *C) {
s.state.Lock()
defer s.state.Unlock()
snapstate.Set(s.state, "mock", &snapstate.SnapState{
Active: true,
Sequence: []*snap.SideInfo{{Revision: 100002}},
LocalRevision: 100002,
})
mockSnap := makeTestSnap(c, `name: mock
version: 1.0`)
chg := s.state.NewChange("install", "install a local snap")
ts, err := snapstate.InstallPath(s.state, mockSnap, "", 0)
c.Assert(err, IsNil)
chg.AddAll(ts)
s.state.Unlock()
defer s.snapmgr.Stop()
s.settle()
s.state.Lock()
// ensure only local install was run, i.e. first action is check-snap
c.Assert(s.fakeBackend.ops, HasLen, 6)
c.Check(s.fakeBackend.ops[0].op, Equals, "check-snap")
c.Check(s.fakeBackend.ops[0].name, Matches, `.*/mock_1.0_all.snap`)
c.Check(s.fakeBackend.ops[2].op, Equals, "unlink-snap")
c.Check(s.fakeBackend.ops[2].name, Equals, "/snap/mock/100002")
c.Check(s.fakeBackend.ops[3].op, Equals, "copy-data")
c.Check(s.fakeBackend.ops[3].name, Equals, "/snap/mock/100003")
c.Check(s.fakeBackend.ops[3].old, Equals, "/snap/mock/100002")
c.Check(s.fakeBackend.ops[4].op, Equals, "candidate")
c.Check(s.fakeBackend.ops[4].sinfo, DeepEquals, snap.SideInfo{Revision: 100003})
c.Check(s.fakeBackend.ops[5].op, Equals, "link-snap")
c.Check(s.fakeBackend.ops[5].name, Equals, "/snap/mock/100003")
// verify snapSetup info
var ss snapstate.SnapSetup
task := ts.Tasks()[0]
err = task.Get("snap-setup", &ss)
c.Assert(err, IsNil)
c.Assert(ss, DeepEquals, snapstate.SnapSetup{
Name: "mock",
Revision: 100003,
SnapPath: mockSnap,
})
// verify snaps in the system state
var snapst snapstate.SnapState
err = snapstate.Get(s.state, "mock", &snapst)
c.Assert(err, IsNil)
c.Assert(snapst.Active, Equals, true)
c.Assert(snapst.Candidate, IsNil)
c.Assert(snapst.Sequence, HasLen, 2)
c.Assert(snapst.Current(), DeepEquals, &snap.SideInfo{
OfficialName: "",
Channel: "",
Revision: 100003,
})
c.Assert(snapst.LocalRevision, Equals, 100003)
}
func (m *InterfaceManager) doSetupProfiles(task *state.Task, _ *tomb.Tomb) error {
task.State().Lock()
defer task.State().Unlock()
// Get snap.Info from bits handed by the snap manager.
ss, err := snapstate.TaskSnapSetup(task)
if err != nil {
return err
}
snapInfo, err := snapstate.Info(task.State(), ss.Name, ss.Revision)
if err != nil {
return err
}
snap.AddImplicitSlots(snapInfo)
snapName := snapInfo.Name()
var snapState snapstate.SnapState
if err := snapstate.Get(task.State(), snapName, &snapState); err != nil {
task.Errorf("cannot get state of snap %q: %s", snapName, err)
return err
}
// Set DevMode flag if SnapSetup.Flags indicates it should be done
// but remember the old value in the task in case we undo.
task.Set("old-devmode", snapState.DevMode())
if ss.DevMode() {
snapState.Flags |= snapstate.DevMode
} else {
snapState.Flags &= ^snapstate.DevMode
}
snapstate.Set(task.State(), snapName, &snapState)
// The snap may have been updated so perform the following operation to
// ensure that we are always working on the correct state:
//
// - disconnect all connections to/from the given snap
// - remembering the snaps that were affected by this operation
// - remove the (old) snap from the interfaces repository
// - add the (new) snap to the interfaces repository
// - restore connections based on what is kept in the state
// - if a connection cannot be restored then remove it from the state
// - setup the security of all the affected snaps
blacklist := m.repo.AutoConnectBlacklist(snapName)
affectedSnaps, err := m.repo.DisconnectSnap(snapName)
if err != nil {
return err
}
// XXX: what about snap renames? We should remove the old name (or switch
// to IDs in the interfaces repository)
if err := m.repo.RemoveSnap(snapName); err != nil {
return err
}
if err := m.repo.AddSnap(snapInfo); err != nil {
if _, ok := err.(*interfaces.BadInterfacesError); ok {
logger.Noticef("%s", err)
} else {
return err
}
}
if err := m.reloadConnections(snapName); err != nil {
return err
}
if err := m.autoConnect(task, snapName, blacklist); err != nil {
return err
}
if len(affectedSnaps) == 0 {
affectedSnaps = append(affectedSnaps, snapInfo)
}
for _, snapInfo := range affectedSnaps {
if err := setupSnapSecurity(task, snapInfo, m.repo); err != nil {
return state.Retry
}
}
return nil
}
func (m *InterfaceManager) doRemoveProfiles(task *state.Task, _ *tomb.Tomb) error {
st := task.State()
st.Lock()
defer st.Unlock()
// Get SnapSetup for this snap. This is gives us the name of the snap.
snapSetup, err := snapstate.TaskSnapSetup(task)
if err != nil {
return err
}
snapName := snapSetup.Name
// Get SnapState for this snap
var snapState snapstate.SnapState
err = snapstate.Get(st, snapName, &snapState)
if err != nil && err != state.ErrNoState {
return err
}
// Get the old-devmode flag from the task.
// This flag is set by setup-profiles in case we have to undo.
var oldDevMode bool
err = task.Get("old-devmode", &oldDevMode)
if err != nil && err != state.ErrNoState {
return err
}
// Restore the state of DevMode flag if old-devmode was saved in the task.
if err == nil {
if oldDevMode {
snapState.Flags |= snapstate.DevMode
} else {
snapState.Flags &= ^snapstate.DevMode
}
snapstate.Set(st, snapName, &snapState)
}
// Disconnect the snap entirely.
// This is required to remove the snap from the interface repository.
// The returned list of affected snaps will need to have its security setup
// to reflect the change.
affectedSnaps, err := m.repo.DisconnectSnap(snapName)
if err != nil {
return err
}
// Setup security of the affected snaps.
for _, snapInfo := range affectedSnaps {
if snapInfo.Name() == snapName {
// Skip setup for the snap being removed as this is handled below.
continue
}
if err := setupSnapSecurity(task, snapInfo, m.repo); err != nil {
return state.Retry
}
}
// Remove the snap from the interface repository.
// This discards all the plugs and slots belonging to that snap.
if err := m.repo.RemoveSnap(snapName); err != nil {
return err
}
// Remove security artefacts of the snap.
if err := removeSnapSecurity(task, snapName); err != nil {
return state.Retry
}
return nil
}
